Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HAZARD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

A comparison of spacecraft penetration hazards due to meteoroids and manmade earth-orbiting objects

The ability of a typical double-walled spacecraft structure to protect against penetration by high-velocity incident objects is reviewed. The hazards presented by meteoroids are compared to the current and potential hazards due to manmade orbiting objects. It is shown that the nature of the meteoroid number-mass relationship makes adequate protection for large space facilities a conceptually straightforward structural problem. The present level of manmade orbiting objects (an estimated 10,000 in early 1975) does not pose an unacceptable risk to manned space operations proposed for the near future, but it does produce penetration probabilities in the range of 1-10 percent for a 100-m diameter sphere in orbit for 1,000 days. The number-size distribution of manmade objects is such that adequate protection is difficult to achieve for large permanent space facilities, to the extent that future restrictions on such facilities may result if the growth of orbiting objects continues at its historical rate.

Brooks, D. R.↗

Wind shear modeling for aircraft hazard definition

Mathematical models of wind profiles were developed for use in fast time and manned flight simulation studies aimed at defining and eliminating these wind shear hazards. A set of wind profiles and associated wind shear characteristics for stable and neutral boundary layers, thunderstorms, and frontal winds potentially encounterable by aircraft in the terminal area are given. Engineering models of wind shear for direct hazard analysis are presented in mathematical formulae, graphs, tables, and computer lookup routines. The wind profile data utilized to establish the models are described as to location, how obtained, time of observation and number of data points up to 500 m. Recommendations, engineering interpretations and guidelines for use of the data are given and the range of applicability of the wind shear models is described.

Frost, W.↗

Procedures for the interpretation and use of elevation scanning laser/multi-sensor data for short range hazard detection and avoidance for an autonomous planetary rover

An autonomous roving science vehicle that relies on terrain data acquired by a hierarchy of sensors for navigation was one method of carrying out such a mission. The hierarchy of sensors included a short range sensor with sufficient resolution to detect every possible obstacle and with the ability to make fast and reliable terrain characterizations. A multilaser, multidetector triangulation system was proposed as a short range sensor. The general system was studied to determine its perception capabilities and limitations. A specific rover and low resolution sensor system was then considered. After studying the data obtained, a hazard detection algorithm was developed that accounts for all possible terrains given the sensor resolution. Computer simulation of the rover on various terrains was used to test the entire hazard detection system.

Troiani, N.↗

Earth reencounter probabilities for aborted space disposal of hazardous nuclear waste

A quantitative assessment is made of the long-term risk of earth reencounter and reentry associated with aborted disposal of hazardous material in the space environment. Numerical results are presented for 10 candidate disposal options covering a broad spectrum of disposal destinations and deployment propulsion systems. Based on representative models of system failure, the probability that a single payload will return and collide with earth within a period of 250,000 years is found to lie in the range .0002-.006. Proportionately smaller risk attaches to shorter time intervals. Risk-critical factors related to trajectory geometry and system reliability are identified as possible mechanisms of hazard reduction.

Friedlander, A. L.↗

Lightning hazards to aircraft

Lightning hazards and, more generally, aircraft static electricity are discussed by a representative for the Air Force Flight Dynamics Laboratory. An overview of these atmospheric electricity hazards to aircraft and their systems is presented with emphasis on electrical and electronic subsystems. The discussion includes reviewing some of the characteristics of lightning and static electrification, trends in weather and lightning-related mishaps, some specific threat mechanisms and susceptible aircraft subsystems and some of the present technology gaps. A roadmap (flow chart) is presented to show the direction needed to address these problems.

Corn, P. B.↗

Stable boundary layer wind shear model for aircraft flight hazard definition

It is pointed out that wind shear, particularly at the lower altitudes in the terminal area, has been identified as being hazardous to aircraft operations. Accurate and reliable wind profiles are required for use in fast time and manned flight simulation studies aimed at fully defining and understanding the wind shear hazard. A description is presented of wind speed profiles for neutral and stable atmospheric conditions developed for the simulation studies to improve the safety and reliability of operations in the terminal area. The wind shear is mathematically modeled and the mathematical scenarios are presented in a format for direct application to wind shear hazard/flight simulation studies.

Frost, W.↗

The potential of carbon fiber induced shock hazards in household toasters

The average exposure to carbon fibers which produced a short and potential shock hazard in a household toaster was determined. Toasters are normally in the off state. They are used for brief periods during the day and have timed cycles during which power is applied. The possibility of a short occurring from the heating element to the case was investigated to find the exposure levels at which a potential shock hazard could appear. The short produced was tested to determine its importance.

Meyers, J. A.↗

Resonance tube hazards in oxygen systems

An experimental and analytical program was carried out to determine whether fluid dynamic oscillations could create a hazard in gaseous oxygen flow systems. The particular fluid dynamic oscillation studied was the resonance tube phenomena as it was excited in a tee-shaped configuration characteristic of configurations found in many industrial high pressure gas flow systems. The types of hazards that could be caused by the oscillations were direct heating and ignition of the piping system by the gas, the greatly augmented heating that could occur if inert contaminants were present, and the ignition of metallic contaminants. Asbestos was used as the inert contaminant; titanium, aluminum, magnesium and steel were chosen as ignitable metallic contaminants. The oscillations in the tee-shaped configuration were compared to oscillations driven by choked convergent nozzles and were found to differ markedly. Temperature generated at the end or base of the resonance tube exceeded 1089 K for both gaseous oxygen and nitrogen and reached 1645 K when asbestos was added. Aluminum in both powder and fiber form was readily ignited within the resonance tube when the supply pressures were less than 8270 kPa whereas at higher supply pressures the mixture exploded with enough violence to destory the apparatus in less than 10 sec. In addition to aluminum, magnesium, and titanium, samples of 400 series stainless steels were also ignited within the resonance tube. The ignition occurred within a few seconds after the oxygen flow began.

Phillips, B. R.↗

Digital detection and processing of laser beacon signals for aircraft collision hazard warning

A low-cost collision hazard warning system suitable for implementation in both general and commercial aviation is presented. Laser beacon systems are used as sources of accurate relative position information that are not dependent on communication between aircraft or with the ground. The beacon system consists of a rotating low-power laser beacon, detector arrays with special optics for wide angle acceptance and filtering of solar background light, microprocessors for proximity and relative trajectory computation, and pilot displays of potential hazards. The laser beacon system provides direct measurements of relative aircraft positions; using optimal nonlinear estimation theory, the measurements resulting from the current beacon sweep are combined with previous data to provide the best estimate of aircraft proximity, heading, minimium passing distance, and time to closest approach.

Sweet, L. M.↗

Hazardous behavior of lithium batteries. Case histories

Case histories were described of hazardous behavior for three different cell sizes ranging in nominal capacity from 300 mAh to 12,000 Ah. Design characteristics and other facts believed to have been responsible for the cell explosions, are presented. Obvious facts are discussed as causes for hazardous behavior of lithium batteries in general and oxyhalide batteries in particular.

Marincic, N.↗

Low-level flow conditions hazardous to aircraft

Low level flow conditions known to be hazardous to aircraft during takeoff/climbout and approach/landing operations are turbulence, wind shear, and vertical motion. These conditions can and frequently do occur separately and in combinations. The identification and selection were completed of representative data cases to determine magnitude, frequency, duration, and simultaneity of occurrence of turbulence (gustiness and gust factor), wind shear (speed and direction), and vertical motion (updraft and downdraft), along with temperature inversions. New representations of temporal and spatial variations in the atmospheric boundary layer were developed. Efforts continued relative to low level flow conditions where published results imply strong vertical shear with virtually no horizontal shear and where order of magnitude analyses of the equations of motion for an aircraft illustrates that low values of horizontal shear (along the flight path) are much more hazardous than larger values of vertical wind shear (altitude).

Alexander, M. B.↗

Natural radiation hazards on the manned Mars mission

The hazards of the natural radiation environment (cosmic rays and solar energetic particles) on a manned mission to Mars are considered. These hazards are addressed in three different settings: the flight to Mars where the astronauts are shielded only by the spacecraft; on the surface of Mars under an atmosphere of about 10 g/sq cm carbon dioxide; and under the surface of Mars where additional shielding would result.

Letaw, John R.↗

Automatic systems and the low-level wind hazard

Automatic flight control systems provide means for significantly enhancing survivability in severe wind hazards. The technology required to produce the necessary control algorithms is available and has been made technically feasible by the advent of digital flight control systems and accurate, low-noise sensors, especially strap-down inertial sensors. The application of this technology and these means has not generally been enabled except for automatic landing systems, and even then the potential has not been fully exploited. To fully exploit the potential of automatic systems for enhancing safety in wind hazards requires providing incentives, creating demand, inspiring competition, education, and eliminating prejudicial disincentitives to overcome the economic penalties associated with the extensive and riskly development and certification of these systems. If these changes will come about at all, it will likely be through changes in the regulations provided by the certifying agencies.

Schaeffer, Dwight R.↗

Space suit extravehicular hazards protection development

Presented is an overview of the development of the integral thermal/micrometeoroid garment (ITMG) used for protection of a space-suited crewmember from hazards of various extravehicular environments. These hazard conditions can range from thermal extremes, meteoroid and debris particles, and radiation conditions in near-earth orbits and free space to sand and dust environments encountered on lunar or planetary surfaces. Representative ITMG materials cross-section layups are identified and described for various space-suit configurations ranging from the Gemini Program to planned protective requirements and considerations for anticipated Space Station EV operations.

Kosmo, Joseph J.↗

USBI Booster Production Company's Hazardous Waste Management Program at the Kennedy Space Center, FL

In response to the hazardous-waste generating processes associated with the launch of the Space Shuttle, a hazardous waste management plan has been developed. It includes waste recycling, product substitution, waste treatment, and waste minimization at the source. Waste material resulting from the preparation of the nonmotor segments of the solid rocket boosters include waste paints (primer, topcoats), waste solvents (methylene chloride, freon, acetone, toluene), waste inorganic compounds (aluminum anodizing compound, fixer), and others. Ways in which these materials are contended with at the Kennedy Space Center are discussed.

Venuto, Charles↗

Space suit extravehicular hazards protection development

Presented is an overview of the development of the integral thermal/micrometeoroid garment (ITMG) used for protection of a space-suited crewmember from hazards of various extravehicular environments. These hazard conditions can range from thermal extremes, meteoroid and debris particles, and radiation conditions in near-earth orbits and free space to sand and dust environments encountered on lunar and planetary surfaces. Representative ITMG materials cross-section layups are identified and described for various space suit configurations ranging from the Gemini program to planned protective requirements and considerations for anticipated Space Station EV operations.

Kosmo, Joseph J.↗

Atmospheric Electrical Modeling in Support of the NASA F-106 Storm Hazards Project

A recently developed storm electrification model (SEM) is used to investigate the operating environment of the F-106 airplane during the NASA Storm Hazards Project. The model is 2-D, time dependent and uses a bulkwater microphysical parameterization scheme. Electric charges and fields are included, and the model is fully coupled dynamically, microphysically and electrically. One flight showed that a high electric field was developed at the aircraft's operating altitude (28 kft) and that a strong electric field would also be found below 20 kft; however, this low-altitude, high-field region was associated with the presence of small hail, posing a hazard to the aircraft. An operational procedure to increase the frequency of low-altitude lightning strikes was suggested. To further the understanding of lightning within the cloud environment, a parameterization of the lightning process was included in the SEM. It accounted for the initiation, propagation, termination, and charge redistribution associated with an intracloud discharge. Finally, a randomized lightning propagation scheme was developed, and the effects of cloud particles on the initiation of lightning investigated.

Helsdon, John H., Jr.↗

Hazard index calculation for 31 May 1984 microburst at Erie, Colorado

Two x-band Doppler radars, operated by NOAA, were used to collect high resolution data within a small, benign looking microburst during the PHOENIX II boundary layer experiment. The lowest 2.5 km of the microbursts was observed throughout its development and dissipation over a 15 minute period. These observations presented an excellent opportunity to compute a quantitative threat to a hypothetical aircraft whose flight track would carry it through the microburst. The hazard index is based on the kinetic energy loss to the aircraft that would be produced by the microburst; it is a function of the vertical air motion, horizontal spatial derivatives of the wind field, and the assumed aircraft air speed and direction. Indices were computed and plotted for all 8 volume scans and peak values were observed to be sufficiently high to present a significant hazard to an aircraft.

Kropfli, R. A.↗