Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ground truth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

The definition of hydrologic model parameters using remote sensing techniques

The reported investigation is concerned with the use of Landsat remote sensing to define input parameters for an array of hydrologic models which are used to synthesize streamflow and water quality parameters in the planning or management process. The ground truth sampling and problems involved in translating the remotely sensed information into hydrologic model parameters are discussed. Questions related to the modification of existing models for compatibility with remote sensing capabilities are also examined. It is shown that the input parameters of many models are presently overdefined in terms of the sensitivity and accuracy of the model. When this overdefinition is recognized many of the models currently considered to be incompatible with remote sensing capabilities can be modified to make possible use with sensors having rather low resolutions.

Ragan, R. M.↗

Large Area Crop Inventory Experiment (LACIE). Phase 3 direct wheat study of North Dakota

The author has identified the following significant results. The green number and brightness scatter plots, channel plots of radiance values, and visual study of the imagery indicate separability between barley and spring wheat/oats during the wheat mid-heading to mid-ripe stages. In the LACIE Phase 3 North Dakota data set, the separation time is more specifically the wheat soft dough stage. At this time, the barley is ripening, and is therefore, less green and brighter than the wheat. Only 4 of the 18 segments studied indicate separation of barley/other spring small grain, even though 11 of the segments have acquisitions covering the wheat soft dough stage. The remaining seven segments had less than 5 percent barley based on ground truth data.

Kinsler, M. C.↗

Cartography: LACIE's spatial processor

The spatial processing needs of LACIE include the location of agricultural test sites, and the registration of ground truth to LANDSAT imagery. The technological aspects of LACIE cartographic support, the need for cartography in satellite crop surveys, and proposed improvements which would enhance support of future programs are discussed.

Rader, M. L.↗

Methods for segment wheat area estimation

The major research conducted during the three years of LACIE to solve problems associated with segment wheat area estimation is reviewed. Topics covered include proportion estimation, clustering, feature extraction, and signature extension. It would appear that LANDSAT-1 and LANDSAT-2 data do not contain enough information to discriminate between crop types perfectly all the time and, therefore, a basic problem arises when no ground truth data on crop types in the area are available. New approaches are needed to reduce labeling error. Perhaps better use of multiyear LANDSAT data, a more detailed understanding of the cropping practices in the area, better crop calendar prediction, and a better understanding of the limiting sources of error in LANDSAT data related to crop discrimination may provide the insight required to develop improved designs.

Heydorn, R. P.↗

Large Area Crop Inventory Experiment (LACIE). Evaluation of three-category classification

The author has identified the following signficant results. Examination of both machine estimates and stratified areal estimates produced by clustering and classification reveal no significant differences between the proportion estimates and ground truth estimates. When testing the variances of the machine estimates, a significant reduction in the variances was found when the number of starting dots was increased from 30 to 45. The variances were again reduced, although not significantly, when the number of starting dots was increased from 45 to 60. From these results, 60 starting dots are recommended for a three-category classifier. When examining the variances of the estimates for the four estimation procedures (using 60 dots), no significant differences were found between procedures. Thus, only the machine clustering may be used to produce an estimate, and the stratified areal estimate computations and maximum likelihood classification can be deleted.

Havens, K. A.↗

Microwave remote sensing of soil moisture content over bare and vegetated fields

The author has identified the following significant results. Ground truth of soil moisture content, and ambient air and soil temperatures were acquired concurrently with measurements of soil moisture in bare fields and fields covered with grass, corn, and soybeans obtained with 1.4 GHz and 5 GHz radiometers mounted on a truck. The biomass of the vegetation was sampled about once a week. The measured brightness temperatures over the bare fields were compared with those of radiative transfer model calculations using as inputs the acquired soil moisture and temperatures data with appropriate values of dielectric constants for soil-water mixtures. A good agreement was found between the calculated and measured results over 10 deg to 70 deg incident angles. The presence of vegetation reduced the sensitivity of soil moisture sensing. At 1.4 GHz the sensitivity reduction ranged from about 20% for 10 cm tall grassland cover to over 50 to 60% for the dense soybean field. At 5 GHz corresponding reduction in sensitivity ranged from approximately 70% to approximately 90%.

Wang, J. R.↗

Microwave remote sensing of snowpacks

The interaction mechanisms responsible for the microwave backscattering and emission behavior of snow were investigated, and models were developed relating the backscattering coefficient (sigma) and apparent temperature (T) to the physical parameters of the snowpack. The microwave responses to snow wetness, snow water equivalent, snow surface roughness, and to diurnal variations were investigated. Snow wetness was shown to have an increasing effect with increasing frequency and angle of incidence for both active and passive cases. Increasing snow wetness was observed to decrease the magnitude sigma and increase T. Snow water equivalent was also observed to exhibit a significant influence sigma and T. Snow surface configuration (roughness) was observed to be significant only for wet snow surface conditions. Diurnal variations were as large as 15 dB for sigma at 35 GHz and 120 K for T at 37 GHz. Simple models for sigma and T of a snowpack scene were developed in terms of the most significant ground-truth parameters. The coefficients for these models were then evaluated; the fits to the sigma and T measurements were generally good. Finally, areas of needed additional observations were outlined and experiments were specified to further the understanding of the microwave-snowpack interaction mechanisms.

Stiles, W. H.↗

Remote sensing of soil moisture content over bare fields at 1.4 GHz frequency

A simple method of estimating moisture content (W) of a bare soil from the observed brightness temperature (T sub B) at 1.4 GHz is discussed. The method is based on a radiative transfer model calculation, which has been successfully used in the past to account for many observational results, with some modifications to take into account the effect of surface roughness. Besides the measured T sub B's, the three additional inputs required by the method are the effective soil thermodynamic temperature, the precise relation between W and the smooth field brightness temperature T sub B and a parameter specifying the surface roughness characteristics. The soil effective temperature can be readily measured and the procedures of estimating surface roughness parameter and obtaining the relation between W and smooth field brightness temperature are discussed in detail. Dual polarized radiometric measurements at an off-nadir incident angle are sufficient to estimate both surface roughness parameter and W, provided that the relation between W and smooth field brightness temperature at the same angle is known. The method of W estimate is demonstrated with two sets of experimental data, one from a controlled field experiment by a mobile tower and the other, from aircraft overflight. The results from both data sets are encouraging when the estimated W's are compared with the acquired ground truth of W's in the top 2 cm layer. An offset between the estimated and the measured W's exists in the results of the analyses, but that can be accounted for by the presently poor knowledge of the relationship between W and smooth field brightness temperature for various types of soils. An approach to quantify this relationship for different soils and thus improve the method of W estimate is suggested.

Wang, J. R.↗

Detailed gravity anomalies from Geos 3 satellite altimetry data

Detailed gravity anomalies are computed from a combination of Geos 3 satellite altimeter and terrestrial gravity data using least-squares principles. The mathematical model used is based on the Stokes' equation modified for a nonglobal solution. Using Geos 3 data in the calibration area, the effects of several anomaly parameter configurations and data densities/distributions on the anomalies and their accuracy estimates are studied. The accuracy estimates for 1 deg x 1 deg mean anomalies from low density altimetry data are of the order of 4 mgal. Comparison of these anomalies with the terrestrial data and also with Rapp's data derived using collocation techniques show rms differences of 7.2 and 4.9 mgal, respectively. Indications are that the anomaly accuracies can be improved to about 2 mgal with high density data. Estimation of 30 in. x 30 in. mean anomalies indicates accuracies of the order of 5 mgal. Proper verification of these results will be possible only when accurate ground truth data become available.

Gopalapillai, G. S.↗

Accuracy assessment in the Large Area Crop Inventory Experiment

The Accuracy Assessment System (AAS) of the Large Area Crop Inventory Experiment (LACIE) was responsible for determining the accuracy and reliability of LACIE estimates of wheat production, area, and yield, made at regular intervals throughout the crop season, and for investigating the various LACIE error sources, quantifying these errors, and relating them to their causes. Some results of using the AAS during the three years of LACIE are reviewed. As the program culminated, AAS was able not only to meet the goal of obtaining accurate statistical estimates of sampling and classification accuracy, but also the goal of evaluating component labeling errors. Furthermore, the ground-truth data processing matured from collecting data for one crop (small grains) to collecting, quality-checking, and archiving data for all crops in a LACIE small segment.

Houston, A. G.↗

A regression technique for evaluation and quantification for water quality parameters from remote sensing data

The paper attempts to define optical physics and/or environmental conditions under which the linear multiple-regression should be applicable. It is reported that investigation of the signal response shows that the exact solution for a number of optical physics conditions is of the same form as a linearized multiple-regression equation, even if nonlinear contributions from surface reflections, atmospheric constituents, or other water pollutants are included. Limitations on achieving this type of solution are defined. Laboratory data are used to demonstrate that the technique is applicable to water mixtures which contain constituents with both linear and nonlinear radiance gradients. Finally, it is concluded that instrument noise, ground-truth placement, and time lapse between remote sensor overpass and water sample operations are serious barriers to successful use of the technique.

Whitlock, C. H.↗

A spectral method for determining the percentage of green herbage material in clipped samples

A laboratory radiometric method for the rapid determination of green and brown vegetation percentages in clipped grass samples has been developed and tested. The method uses red and photographic infrared radiance or reflectance differences between green and brown vegetation. Mixtures of green and brown material were found to have radiances or reflectances proportional to the percentage of green material present. This method may permit the use of rapid green/brown radiometric determinations to replace the tedious hand sorting now generally used. It may also have application in remote sensing of vegetation ground-truth work where the determination of dry green biomass in clipped samples is necessary.

Tucker, C. J.↗

Satellite measurements of tropospheric aerosols

Landsat data were originally used to demonstrate that a linear relationship exists between the upwelling visible radiance and the aerosol optical thickness (essentially all of this thickness is in the troposphere) over oceans. Since that time similar relationships have been shown to exist for sensors on the GOES and NOAA-5 satellites. A global scale ground truth experiment using Tiros-N data is planned and will investigate the variability of the linear relationship at different sites around the globe. A comparison of the results for the different satellites is presented, together with a discussion of the requirements for routine satellite monitoring of tropospheric aerosols on a global scale.

Griggs, M.↗

The use of Landsat data to inventory cotton and soybean acreage in North Alabama

This study was performed to determine if Landsat data could be used to improve the accuracy of the estimation of cotton acreage. A linear classification algorithm and a maximum likelihood algorithm were used for computer classification of the area, and the classification was compared with ground truth. The classification accuracy for some fields was greater than 90 percent; however, the overall accuracy was 71 percent for cotton and 56 percent for soybeans. The results of this research indicate that computer analysis of Landsat data has potential for improving upon the methods presently being used to determine cotton acreage; however, additional experiments and refinements are needed before the method can be used operationally.

Downs, S. W., Jr.↗

Accuracies of three computationally efficient algorithms for computing atmospheric transmittances

Three algorithms for calculating polychromatic atmospheric transmittance functions have been tested using a set of eleven distinct temperature profiles in order to compare transmittance accuracies achievable by the three methods. The comparison of rms errors demonstrates that the iterative method of McMillin and Fleming (1976) is the most accurate of the efficient algorithms currently available for gases with constant mixing ratios; its accuracy approaches that of the spectroscopic parameters and the computational approximations used in the ground-truth line-by-line calculations. The method of Arking et al. (1974), while less accurate, has the advantage of being perfectly general and easily adapted to cases where spectral bandwidths are varied

Mcmillin, L. M.↗

Report of secondary flows, boundary layers, turbulence and wave team, report 1

General criteria for a flight test option are that: (1) there be a good opportunity for comparison with other measurement techniques; (2) the flow to be measured is of considerable scientific or practical interest; and (3) the airborne laser Doppler system is well suited to measure the required quantities. The requirement for comparison, i.e., ground truth, is particularly important because this is the first year of operation for the system. It is necessary to demonstrate that the system does actually measure the winds and compare the results with other methods to provide a check on the system error analysis. The uniqueness of the laser Doppler system precludes any direct comparison, but point measurements from tower mounted wind sensors and two dimensional fields obtained from radars with substantially different sampling volumes are quite useful.

Scoggins, J. R.↗

Pure pixel classification software

Programs are described which permit classification runs with the LARSYS software to be made on images which have the ground truth field boundaries removed.

Wehmanen, O. A.↗

Trophic classification of Tennessee Valley area reservoirs derived from LANDSAT multispectral scanner data

LANDSAT MSS data from four different dates were extracted from computer tapes using a semiautomated digital data handling and analysis system. Reservoirs were extracted from the surrounding land matrix by using a Band 7 density level slice of 3; and descriptive statistics to include mean, variance, and ratio between bands for each of the four bands were calculated. Significant correlations ( 0.80) were identified between the MSS statistics and many trophic indicators from ground truth water quality data collected at 35 reservoirs in the greater Tennessee Valley region. Regression models were developed which gave significant estimates of each reservoir's trophic state as defined by its trophic state index and explained in all four LANDSAT frames at least 85 percent of the variability in the data. To illustrate the spatial variations within reservoirs as well as the relative variations between reservoirs, a table look up elliptical classification was used in conjunction with each reservoir's trophic state index to classify each reservoir on a pixel by pixel basis and produce color coded thematic representations.

Meinert, D. L.↗