Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GYROSCOPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

JT9D jet engine performance deterioration

The analytical techniques utilized to examine the effects of flight loads and engine operating conditions on performance deterioration are presented. The role of gyroscopic, gravitational, and aerodynamic loads are shown along with the effect of variations in engine build clearances. These analytical results are compared to engine test data along with the correlation between analytically predicted and measured clearances and rub patterns. Conclusions are drawn and important issues are discussed.

Jay, A.↗
NASA NTRS1978

Effect of steady flight loads on JT9D-7 performance deterioration

Short term engine deterioration occurs in less than 250 flights on a new engine and in the first flights following engine repair; while long term deterioration involves primarily hot section distress and compression system losses which occur at a somewhat slower rate. The causes for short-term deterioration are associated with clearance changes which occur in the flight environment. Analytical techniques utilized to examine the effects of flight loads and engine operating conditions on performance deterioration are presented. The role of gyroscopic, gravitational, and aerodynamic loads are discussed along with the effect of variations in engine build clearances. These analytical results are compared to engine test data along with the correlation between analytically predicted and measured clearances and rub patterns. Conclusions are drawn and important issues are discussed.

Jay, A.↗
NASA NTRS1978

Structural Dynamics, Stability, and Control of Helicopters

The dynamic synthesis of gyroscopic structures consisting of point-connected substructures is investigated. The objective is to develop a mathematical model capable of an adequate simulation of the modal characteristics of a helicopter using a minimum number of degrees of freedom. The basic approach is to regard the helicopter structure as an assemblage of flexible substructures. The variational equations for the perturbed motion about certain equilibrium solutions are derived. The discretized variational equations can be conveniently exhibited in matrix form, and a great deal of information about the system modal characteristics can be extracted from the coefficient matrices. The derivation of the variational equations requires a monumental amount of algebraic operations. To automate this task a symbolic manipulation program on a digital computer is developed.

Meirovitch, L.↗
NASA NTRS1978

The scanning modulation collimator experiment on the HEAO-1

The purpose of this experiment is to localize celestial sources of X-rays to a precision of 5 to 20 arcsec, so that they may be identified with optical or radio counterparts. We also study their angular size and structure, to elucidate the X-ray emission mechanism. Four grids, wound with nickel alloy wires, are aligned to produce a modulated X-ray signal when the spacecraft rotation carries the collimator field of view across an X-ray source. An image dissector star camera and rate integrating gyroscopes are used to deduce the celestial position from which a peak X-ray signal arises. On-orbit performance and thermal stability have been very good. Based on the first six weeks of quick look data, we have the following results: the location of an X-ray burst source within a globular cluster; the location of 4U1608-52, a unique object which shows bursting, transient, and steady X-ray behavior and is also an optical source; the location of the X-ray transient H1705-25, which provided Anglo-Australian astronomers the basis for an optical identification with a nova-like object; the location of the X-ray transient H1743-32 in the galactic center; and a precise measurement of the angular extent of the Crab Nebula.

Schwartz, D. A.↗
NASA NTRS1978

Performance of ground attitude determination procedures for HEAO-1

Ground attitude support for HEAO 1 provided at GSFC by the HEAO 1 Attitude Ground Support System (AGSS) is described. Information telemetered from Sun sensors, gyroscopes, star trackers, and an onboard computer are used by the AGSS to compute updates to the onboard attitude reference and gyro calibration parameters. The onboard computer utilizes these updates in providing continuous attitudes (accurate to 0.25degree) for use in the observatory's attitude control procedures. The relationship between HEAO 1 onboard and ground processing, the procedures used by the AGSS in computing attitude and gyro calibration updates, and the performance of these procedures in the HEAO 1 postlaunch environment is discussed.

Fallon, L., III↗
NASA NTRS1978

Five years in the life of an inertial system operating in orbit

The paper describes the in-orbit performance of the gyroscopes and strapdown attitude reference system for the OAO-C (Copernicus) satellite, launched on Aug. 21, 1972. In order to fulfill NASA requirements, the inertial system had to: (1) operate for at least one year in orbit without failure, (2) maintain an inertial reference with an uncertainty of 50 microradians or less for at least one hour, and (3) control attitude changes with an accuracy of at least 30 parts per million. During the orbit period, the inertial system has demonstrated a capability for maintaining an inertial reference that is significantly better than these performance goals.

Harris, R. A.↗
NASA NTRS1978

Synthesis and dynamic characteristics of large structures with rotating substructures

The variational equations of motion of large structures with rotating substructures are derived by the substructure synthesis approach, whereby a discretization procedure akin to the Rayleigh-Ritz method is used to represent the elastic motion of every substructure by a suitable set of admissible functions. Using an inclusion principle for gyroscopic systems, the effects on the predicted system dynamic characteristics of truncating the number of admissible functions used for each substructure can be assessed. Criteria for rational selection of admissible functions are presented.

Meirovitch, L.↗
NASA NTRS1979

Ground attitude determination and gyro calibration procedures for the HEAO missions

The Attitude Ground Support System (AGSS) at Goddard Space Flight Center provides ground attitude support for the High Energy Astronomy Observatory (HEAO) missions. The AGSS uses information telemetered from sun sensors, gyroscopes, star trackers (STAs), and an onboard computer to calculate updates to the onboard attitude reference and gyro calibration parameters. This paper presents the procedures used by the AGSS in computing reference and calibration updates; it also provides HEAO-1 postlaunch statistics that illustrate the ability to maintain 0.25-deg accuracy in the onboard attitude reference. Simulated HEAO-B results show an improvement in reference accuracy through the use of calibration maneuvers.

Fallon, L., III↗
NASA NTRS1978

Future activity in astrophysics

An overview is given of the NASA astrophysics program with emphasis on missions which are likely to be started or flown within the next five to seven years. Included in this summary are descriptions of approved future missions such as the Infrared Astronomical Satellite, the Space Telescope and the HEAO-B and HEAO-C satellites, as well as of missions which are now in the planning stage. Such missions include the Cosmic Background and Extreme Ultraviolet Explorers, the Gamma Ray and Cosmic Ray Observatories, the Advanced X-ray Astrophysics Facility, infrared and optical/ultraviolet telescopes to be used on the Space Shuttle, and the orbiting gyroscope experiment (GP-B). The current state-of-the-art, as well as future requirements in astrophysical sensing techniques, are highlighted.

Rosendhal, J. D.↗
NASA NTRS1979

Second order nonlinear equations of motion for spinning highly flexible line-elements

A formulation is given for the second order nonlinear equations of motion for spinning line-elements having little or no intrinsic structural stiffness. Such elements have been employed in recent studies of structural concepts for future large space structures such as the Heliogyro solar sailer. The derivation is based on Hamilton's variational principle and includes the effect of initial geometric imperfections (axial, curvature, and twist) on the line-element dynamics. For comparison with previous work, the nonlinear equations are reduced to a linearized form frequently found in the literature. The comparison has revealed several new spin-stiffening terms that have not been previously identified and/or retained. They combine geometric imperfections, rotary inertia, Coriolis, and gyroscopic terms.

Salama, M.↗
NASA NTRS1979

A 1.2 meter balloon-borne telescope for a submillimeter wave sky survey

A balloon-borne, 1.2 meter Cassegrain telescope designed for diffraction-limited imagery at 100 microns is being developed for a survey of the Galactic plane at submillimeter wavelengths. The telescope pointing system is servocontrolled using a gyroscope for the primary stabilization reference. Extensive use is made of microprocessors for flight sequencing, pointing control and stabilization, and telemetry formatting. A description of the telescope, helium-cooled detectors, and the orientation subsystems are presented together with a brief discussion of the proposed astronomical observations.

Silverberg, R. F.↗
NASA NTRS1981

Speed control for synchronous motors

Feedback circuit controls fluctuations in speed of synchronous ac motor. Voltage proportional to phase angle is developed by phase detector, rectified, amplified, compared to threshold, and reapplied positively or negatively to motor excitation circuit. Speed control reduces wow and flutter of audio turntables and tape recorders, and enhances hunting in gyroscope motors.

Packard, H.↗
NASA NTRS1980

ATM-CMG control system stability

Stability analyses and simulation data and results are presented for an initial Control Moment Gyroscope system proposed for the Apollo Telescope Mount cluster (later named Skylab) using momentum vector feedback. A compensation filtering technique is presented which significantly improved analytical and simulation performance of the system. This technique is quite similar to the complementary filtering technique and represents an early NASA application.

Anderson, W. W.↗
NASA NTRS1980

Parametric instabilities of rotor-support systems with application to industrial ventilators

Rotor support systems interaction with parametric excitation is considered for both unequal principal shaft stiffness (generators) and offset disc rotors (ventilators). Instability regions and types of instability are computed in the first case, and parametric resonances in the second case. Computed and experimental results are compared for laboratory machine models. A field case study of parametric vibrations in industrial ventilators is reported. Computed parametric resonances are confirmed in field measurements, and some industrial failures are explained. Also the dynamic influence and gyroscopic effect of supporting structures are shown and computed.

Parszewski, Z.↗
NASA NTRS1980

Torques on a nearly rigid body in a relativistic gravitational field

The effect of post-Newtonian potentials on the rotation of a nearly rigid body is shown to consist of a precession and a torque. The frequency of the precession can be exactly represented by means of suitable differential operators. The relativistic torques in the quadrupole approximation depend on the instantaneous orientation of the principal axes of one body with respect to the position like the classical torque and velocity of the other. For a relatively low mass body, such as a gyroscope, these velocity-dependent torques have no observable consequences.

Caporali, A.↗