Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fracture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Research Considerations for Foam Fracturing in Stimulation Development for Enhanced Geothermal Systems

In regions where hydraulic fracturing is being considered for enhanced geothermal systems (EGS), and use of water is an issue, foam fracturing is an attractive option as a reduced water or waterless stimulation method. Although it has been shown to be an effective alternative in oil & gas production, foam fracturing has not yet been demonstrated in geothermal energy development. There are many challenges encountered in EGS. The reservoir may be located at great depth where earth stresses will be large and rock strength may be high. In addition, the viscosity of foam is higher than that of a pure single-phase fluid. Thus, the fracturing pressure will be increased substantially if a conventional fracturing routine is used. Moreover, fracturing in EGS systems may have more potential for induced seismicity. A proactive approach is proposed to address this technical challenge by using pulsed injection in a current project, sponsored by the U.S. DOE GTO Waterless Stimulation Initiative. This approach enables the dynamic responses of rock structure to be utilized and a new cavitation-based material-removal mechanism to be explored for enhanced fracturing efficiency. It also offers an approach to mitigate fracturing-induced seismicity and the potential to control dynamic behavior of foamed fluids. Research considerations will be described for investigation of the above phenomena in foam fracturing for EGS stimulation development.

Wang, Hong↗

Fracture Tracer Injection Response to Pressure Perturbations at an Injection Well

The EGS Collab project constructed an approximately ten-meter scale field site where fracture stimulation and flow/transport models can be validated against controlled, in-situ experiments. The first multi-well experimental site was established at the 4850 level of the Stanford Underground Research Facility (SURF) in the Homestake Mine located in South Dakota. Hydraulic fractures were created at an injection well drilled sub-horizontal from the drift. A flow system was established in one set of fractures by injection water at approximately 400 ml/min between a set of packers 164 feet from the drift wall in the injection well through a hydraulically stimulated fracture. Injected water was recovered from five locations in 4 nearby wells. From the end of October to the middle of November of 2018, a series of fracture characterization tests were conducted using a series of 10 tracer tests (7 which used C-dot and chloride as conservative solute tracers) to assess the flow pathway in the stimulated fracture. The injected tracers were detected in three of the five water production locations where the total water recovery ranged from approximately 50 to 80% of the injected water depending on the day the test was being conducted. Analysis of a series of tracers during this two-week period suggest a large change in the flow fracture field occurred during this testing period. A comparison of the tracer breakthrough curves at the production well showed a marked decrease in the initial and peak concentration over time, whereas the OB well exhibited an increase in the initial and peak concentration arrival during this fracture characterization testing period. These changes are believed to be in response to a number of higher-pressure short-term injections at the injection well in early November (2nd to the 6th). Results of this testing suggest that the fracture flow pathways can be altered as a result of the pressure perturbations in the injection well on the integrity of adjacent monitoring wells. Results from the EGS Collab project will support the DOE Geothermal Technology Office FORGE and other EGS development efforts.

15 GEOTHERMAL ENERGY↗

Multi-stage geologic fracturing

Explosive geologic fracturing methods, devices, and systems can be used in combination with other geologic fracturing means, such as hydraulic fracturing methods, devices and systems, or other fluid-based fracturing means. An exemplary method comprises introducing an explosive system into a wellbore in a geologic formation, detonating the explosive system in the wellbore to fracture at least a first portion of the geologic formation adjacent to the wellbore, and introducing pressurized fluid into the wellbore to enhance the fracturing of the first portion of the geologic formation. Such multi-stage fracturing can further enhance the resulting fracturing of geologic formation relative to explosive fracturing alone.

Mace, Jonathan Lee↗

Development of a fracture network: a block and springs model

Since flow in fractured reservoirs is significantly enhanced by clusters of inter-connecting fractures, it's important to understand their inter-connectedness. In these fractured reservoirs, one often finds two sets of fractures due to two separate geologic events. We have developed a blocks and springs model to study how the second generation fractures intersect the first generation of. We find a percolation-like transition where the cluster size grows with increasing strain leading to system-spanning fractal clusters. Increasing the thickness of the layer being fractured leads to sparser system-spanning fracture clusters with smaller fractal dimension. We have studied how the thickness of the layer affects the fractal character of the fracture clusters as well as their number distribution, and the correlations within the large fracture cluster.

Ferer, M V↗

Fracture toughness of zirconia with a nanometer size notch fabricated using focused ion beam milling

Zirconia with 3 mol% yttria (3Y-TZP) has been used for dental crowns and bridges due to its excellent mechanical behavior. Performing fracture toughness testing on this nanograin material, however, can be a challenge. For reliable results, fracture toughness testing requires an extremely sharp notch in the test specimen that closely approximates a very sharp crack. This study was to investigate an alternative method to produce nanometer-sized notches, which are less than the average grain size of 3Y-TZP, during the preparation of single-edge V-notched beam specimens and report the resulting fracture toughness value. We present a method using focused ion beam (FIB) milling to fabricate nanometer-sized notches in 3Y-TZP. The notch tip is <100 nm wide, which is smaller than the grain size, and is consistent throughout the thickness of the specimen. The FIB-notched specimens show a much reduced average fracture toughness of 5.64 ± 1.14 MPa√m compared to 8.90 ± 0.23 MPa√m for the specimens without FIB-notches. The FIB-milling did not appear to create any monoclinic phase prior to fracture toughness testing. Fractures originated at the FIB-notches, and the notch size can be readily identified post-mortem using a microscope. A considerable amount of tetragonal-to-monoclinic phase transformation was observed throughout the fracture surfaces. FIB milling provides an alternative method to fabricate nanometer-sized notches that are smaller than the grain size of tetragonal zirconia polycrystal. The fracture toughness determined using FIB-notches was ~5.64 MPa√m, smaller than the specimens with V-notches fabricated using saw blades.

36 MATERIALS SCIENCE↗

Influence of build direction on the fracture mechanism of 3D printed octet lattices

Here, we investigate the effects of 3D printing build directions on the fracture properties of octet lattice metamaterials made of polylactic acid (PLA) and how these effects vary with the relative density of the lattices. Single-edge notch bend samples are 3D printed in two orthogonal build directions at various relative densities. Our results show that the work of fracture for octet lattices with build directions parallel to the crack plane is significantly higher than those with build directions perpendicular to the crack plane. We also observed that the ratio of specific work of fracture between the two build directions remains nearly constant across different relative densities. In contrast, the ratio of peak load between the two build directions decreases as relative density increases. Furthermore, the build direction dictates the fracture mechanism. While the perpendicular build direction predominantly results in a brittle (mode I) fracture, the parallel build direction leads to a complex, delamination-dominated (mode II type) fracture. This phenomenon is largely governed by the weak interfaces formed between the printed layers and their interaction with the lattice geometry. These results reveal that the build direction governs the fracture mechanism and work of fracture of these lattice metamaterials and is therefore an important design consideration.

3D printed PLA↗

In situ quantification of fracture slip induced by hydraulic injections in a deep borehole: A comparison of two different borehole techniques

In situ measurements of fracture deformation during fluid injection are rare, yet essential for understanding the mechanical response of fractured rock. In this study, we evaluate the reliability of two methods by comparing their slip vector estimates: high-resolution borehole acoustic televiewer images captured before and after injection tests, and displacement data from a three-component borehole deformation probe recorded during the injections. Acoustic televiewer images capture only final in-plane displacement, whereas three-component borehole deformation measurements provide full 3D, transient fracture movement. Four injection tests in a fractured granitic rock mass along an inclined borehole at the Bedretto Underground Laboratory (Switzerland), beneath more than 1100 m of overburden, were analyzed. The two methods yielded consistent kinematics and comparable slip magnitudes, typically in the range of 0.2 – 0.6 mm. Angular differences between estimated slip directions ranged from 0.2° to 28°. For two test intervals with pre-existing fractures optimally oriented for slip, the measured slip vectors agreed with forward-modeled slip vectors based on the regional in situ stress field, supporting the Wallace–Bott hypothesis. Measurable shear displacement was identified in two test intervals containing fractures oriented nearly perpendicular to the least principal stress, including a newly formed hydraulic fracture. This demonstrates that even fractures unfavorably oriented for slip can undergo shear due to local stress perturbations around an inclined borehole.

Acoustic televiewer↗

Fracture resistance of high entropy alloys: A review

Fascinated by the exceptional mechanical properties of high entropy alloys (HEAs), unremitting endeavors are placed on accelerating their engineering applications in multiple critical fields. As all other structural materials, attaining sufficient fracture resistance is a vital requirement for HEAs, particularly for safety critical applications. Along this line, the fracture resistance of a number of HEAs and medium-entropy alloys (MEAs) had been studied in the past decade. While some exhibit unprecedented fracture toughness akin to the toughest materials ever known, others are just alike brittle materials. Herein, we summarize one decade of investigations of the fracture resistance of HEAs and MEAs, including the characterization of fracture toughness, disclosure of fractographic characteristics, and understanding of fracture micro-mechanisms. The role of alloy composition, temperature, phase constituent, and characterization techniques in altering the fracture toughness are discussed; characteristics of the cleavage and shear fractures are detailed; toughening and weakening mechanisms, from the atomic to the defect level, are reviewed. In conclusion, some key questions are raised, and the directions for future research are suggested.

36 MATERIALS SCIENCE↗

Upscaling solute transport in naturally fractured porous media with the continuous time random walk method

Solute transport in fractured porous media is typically 'non-Fickian'; that is, it is characterized by early breakthrough and long tailing and by nonlinear growth of the Green function-centered second moment. This behavior is due to the effects of (1) multirate diffusion occurring between the highly permeable fracture network and the low-permeability rock matrix, (2) a wide range of advection rates in the fractures and, possibly, the matrix as well, and (3) a range of path lengths. As a consequence, prediction of solute transport processes at the macroscale represents a formidable challenge. Classical dual-porosity (or mobile-immobile) approaches in conjunction with an advection-dispersion equation and macroscopic dispersivity commonly fail to predict breakthrough of fractured porous media accurately. It was recently demonstrated that the continuous time random walk (CTRW) method can be used as a generalized upscaling approach. Here we extend this work and use results from high-resolution finite element-finite volume-based simulations of solute transport in an outcrop analogue of a naturally fractured reservoir to calibrate the CTRW method by extracting a distribution of retention times. This procedure allows us to predict breakthrough at other model locations accurately and to gain significant insight into the nature of the fracture-matrix interaction in naturally fractured porous reservoirs with geologically realistic fracture geometries.

54 ENVIRONMENTAL SCIENCES↗

Permeability Evolution of Fractures in Shale in the Presence of Supercritical CO 2

We experimentally examined the impact of supercritical carbon dioxide (scCO 2 ) on fracture permeability and fracture surface characteristics in shales of various compositions. We measured permeability and fracture normal displacement at different effective stresses using both argon and scCO 2 as pore fluids. Both natural fractures and saw cuts in intact samples were used in our study. The permeability and fracture normal displacement decrease after multiple loading/unloading cycles, apparently as the result of inelastic compaction. In samples with high carbonate content, we observe an increase in permeability and fracture surface degradation after more than 3.5 days of exposure to scCO 2 , apparently due to carbonate dissolution. We demonstrate that the sensitivity of permeability to effective normal stress correlates well with the fracture normal displacement. The dependence of permeability on effective normal stress increases after exposure to scCO 2 as the fracture surface became more compliant.

58 GEOSCIENCES↗

Reactive Transport Modeling of Mineral Precipitation and Carbon Trapping in Discrete Fracture Networks

In this study we use numerical experiments to analyze reactive flow and transport behavior in discrete intersecting fracture networks, focusing on (a) how reaction-induced changes in physical and chemical properties affect flow connectivity and (b) how fracture networks developed in the Earth's critical zone contribute to carbon sequestration via mineral weathering reactions. In the first part of the study, we used two-dimensional reactive flow and transport simulations to analyze the impacts of mixing in a natural discrete fracture network. We concluded that reaction-induced changes can substantially alter the flow connectivity, especially at fracture intersections. The second set of simulations considered the problem of natural weathering of fractured mafic and ultramafic rocks in the partially saturated Earth's critical zone as a function of infiltration rates, fracture permeability, and partially saturated flow parameters. As a model system, we considered an incongruent reaction network with dissolution of forsterite and precipitation of magnesite. The behavior is complex in terms of the rate-controlling processes because of the multicomponent nature of the system as shown by the grid Peclet number: the CO 2 behavior is gas diffusion-controlled in the partially saturated zone, while the rate of water flow via the Damkӧhler number controls Mg 2+ transport through the fracture network. The amounts of carbon that can be trapped are modest, but the naturally fractured domain considered here provides a useful “base case” against which various engineered solutions can be compared.

58 GEOSCIENCES↗

Fracture Behavior and Properties of Functionally Graded Fiber-Reinforced Concrete

In concrete pavements, a single concrete mixture design is selected to resist mechanical loading without attempting to adversely affect the concrete pavement shrinkage, ride quality, or noise attenuation. An alternative approach is to design distinct layers within the concrete pavement surface which have specific functions thus achieving higher performance at a lower cost. The objective of this research was to address the structural benefits of functionally graded concrete materials (FGCM) for rigid pavements by testing and modeling the fracture behavior of different combinations of layered plain and synthetic fiber-reinforced concrete materials. Fracture parameters and the post-peak softening behavior were obtained for each FGCM beam configuration by the three point bending beam test. The peak loads and initial fracture energy between the plain, fiber-reinforced, and FGCM signified similar crack initiation. The total fracture energy indicated improvements in fracture behavior of FGCM relative to full-depth plain concrete. The fracture behavior of FGCM depended on the position of the fiber-reinforced layer relative to the starter notch. The fracture parameters of both fiber-reinforced and plain concrete were embedded into a finite element-based cohesive zone model. The model successfully captured the experimental behavior of the FGCMs and predicted the fracture behavior of proposed FGCM configurations and structures. This integrated approach (testing and modeling) demonstrates the viability of FGCM for designing layered concrete pavements system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of Stimulation-Response Relationships for Complex Fracture Systems in Enhanced Geothermal Reservoirs

Hydraulic fracturing is currently the primary method for stimulating low-permeability geothermal reservoirs and creating Enhanced (or Engineered) Geothermal Systems (EGS) with improved permeability and heat production efficiency. Complex natural fracture systems usually exist in the formations to be stimulated and it is therefore critical to understand the interactions between existing fractures and newly created fractures before optimal stimulation strategies can be developed. Our study aims to improve the understanding of EGS stimulation-response relationships by developing and applying computer-based models that can effectively reflect the key mechanisms governing interactions between complex existing fracture networks and newly created hydraulic fractures. In this paper, we first briefly describe the key modules of our methodology, namely a geomechanics solver, a discrete fracture flow solver, a rock joint response model, an adaptive remeshing module, and most importantly their effective coupling. After verifying the numerical model against classical closed-form solutions, we investigate responses of reservoirs with different preexisting natural fractures to a variety of stimulation strategies. The factors investigated include: the in situ stress states (orientation of the principal stresses and the degree of stress anisotropy), pumping pressure, and stimulation sequences of multiple wells.

15 GEOTHERMAL ENERGY↗

Quantitative Assessment of Parent Well Effect on Hydraulic Fracture Propagation at HFTS2: Insights from Cross-Well Strain Measurements and Microseismic Data

Understanding fracture propagation behavior is essential for optimizing hydraulic fracturing in unconventional reservoirs. This study demonstrates the value of integrating Low-Frequency Distributed Acoustic Sensing (LF-DAS) and microseismic data, which together provide a more complete picture of fracture growth. Using data from Hydraulic Fracturing Test Site 2 (HFTS2), we identify stress changes in depletion zones induced by parent wells as a key factor influencing fracture propagation. This result is shown by new measurements of in-situ fracture propagation velocity and fracture-hit volume (fluid volume at fracture hit?) from LF-DAS and event density from microseismic. These findings highlight the importance of considering parent well effects, well spacing, and stimulation sequencing in completion design to improve reservoir development and production efficiency.

depletion zones↗

Natural and Induced Fracture Diagnostics from 4-D VSP Low Permeability Gas Reservoirs

Tight gas sand reservoirs generally contain thick gas-charged intervals that often have low porosity and very low permeability. Natural and induced fractures provide the only means of production. The objective of this work is to locate and characterize natural and induced fractures from analysis of scattered waves recorded on 4-D (time lapse) VSP data in order to optimize well placement and well spacing in these gas reservoirs. Using model data simulating the scattering of seismic energy from hydraulic fractures, we first show that it is possible to characterize the quality of fracturing based upon the amount of scattering. In addition, the picked arrival times of recorded microseismic events provide the velocity moveout for isolating the scattered energy on the 4-D VSP data. This concept is applied to a field dataset from the Jonah Field in Wyoming to characterize the quality of the induced hydraulic fractures. The time lapse (4D) VSP data from this field are imaged using a migration algorithm that utilizes shot travel time tables derived from the first breaks of the 3D VSPs and receiver travel time tables based on the microseismic arrival times and a regional velocity model. Four azimuthally varying shot tables are derived from picks of the first breaks of over 200 VSP records. We create images of the fracture planes through two of the hydraulically fractured wells in the field. The scattered energy shows correlation with the locations of the microseismic events. In addition, the azimuthal scattering is different from the azimuthal reflectivity of the reservoir, giving us more confidence that we have separated the scattered signal from simple formation reflectivity. Variation of the scattered energy along the image planes suggests variability in the quality of the fractures in three distinct zones.

03 NATURAL GAS↗

Modeling hydraulic fracture opening and closure with proppant transport and settlement

Hydraulic fracturing is a widely used reservoir stimulation technique for improving fluid circulation in rock formations with extremely low permeability, particularly in enhanced geothermal systems (EGS). To better understand the complex processes involved and improve hydraulic stimulation performance, we have developed ELK (ELectrical fracKing), a MOOSE-based 3D finite element application designed to model the behavior of proppant-fluid mixtures in propagating fractures. ELK integrates both the fluid and proppant components, incorporating particle-driven processes such as gravity settling, particle-particle interactions, and strong density and viscosity contracts, in addition to conventional fluid-driven fracture propagation. In this contribution, we extend ELK to model propped fracture closure, which occurs after the injection phase due to a dramatic drop in the effective stress on the fracture plane. During the shut-in, flowback, and production periods, the fracture width decreases, with the closure behavior depending on proppant concentration.. At low concentrations, closure follows a nonlinear joint law linked to the stiffness of asperities in the fracture walls. While at high concentrations, it is controlled by the properties of packed proppant bed. The extended ELK application is validated against several benchmark examples, including the propagation of an inclined frictional crack, fracture opening and sliding in response to fluid injection, and flowback analysis. We believe that ELK’s enhanced capabilities can serve as a valuable tool for the design and optimization of EGS deployment.

15 - GEOTHERMAL ENERGY↗

HYDROGEN EFFECTS ON THE FRACTURE TOUGHNESS PROPERTIES OF FORGED STAINLESS STEELS

The effect of hydrogen on the fracture toughness properties of Types 304L, 316L and 21-6-9 forged stainless steels was investigated. Fracture toughness samples were fabricated from forward-extruded forgings. Samples were uniformly saturated with hydrogen after exposure to hydrogen gas at 34 MPa or 69 and 623 K prior to testing. The fracture toughness properties were characterized by measuring the J-R behavior at ambient temperature in air. The results show that the hydrogen-charged steels have fracture toughness values that were about 50-60% of the values measured for the unexposed steels. The reduction in fracture toughness was accompanied by a change in fracture appearance. Both uncharged and hydrogen-charged samples failed by microvoid nucleation and coalescence, but the fracture surfaces of the hydrogen-charged steels had smaller microvoids. Type 316L stainless steel had the highest fracture toughness properties and the greatest resistance to hydrogen degradation.

08 HYDROGEN↗

Modeling the fracture of ice sheets on parallel computers.

The objective of this project is to investigate the complex fracture of ice and understand its role within larger ice sheet simulations and global climate change. At the present time, ice fracture is not explicitly considered within ice sheet models due in part to large computational costs associated with the accurate modeling of this complex phenomena. However, fracture not only plays an extremely important role in regional behavior but also influences ice dynamics over much larger zones in ways that are currently not well understood. Dramatic illustrations of fracture-induced phenomena most notably include the recent collapse of ice shelves in Antarctica (e.g. partial collapse of the Wilkins shelf in March of 2008 and the diminishing extent of the Larsen B shelf from 1998 to 2002). Other fracture examples include ice calving (fracture of icebergs) which is presently approximated in simplistic ways within ice sheet models, and the draining of supraglacial lakes through a complex network of cracks, a so called ice sheet plumbing system, that is believed to cause accelerated ice sheet flows due essentially to lubrication of the contact surface with the ground. These dramatic changes are emblematic of the ongoing change in the Earth's polar regions and highlight the important role of fracturing ice. To model ice fracture, a simulation capability will be designed centered around extended finite elements and solved by specialized multigrid methods on parallel computers. In addition, appropriate dynamic load balancing techniques will be employed to ensure an approximate equal amount of work for each processor.

54 ENVIRONMENTAL SCIENCES↗