Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ferry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Effect of leaving group on the oligomerization of 5'-AMP on montmorillonite

The oligomerization of imidazole derivative of 5'-AMP (ImpA) in the presence of montmorillonite clay yields oligomers containing up to 10 monomer units. In these reactions, the heterocyclic base, imidazole is the leaving group. In our present study, we synthesized a series of activated nucleotides of 5'AMP using other leaving groups such as pyrazole, 1,2,4-triazole, piperidine, morpholine, 4-aminopyridine, 4-methylaminopyridine, 4-dimethylaminopyridine, 2-aminobenzimidazole etc. to determine the effect of amine leaving group on the products of the oligomerization reaction. Earlier results from our laboratory showed that the presence AppA in the clay reaction of ImpA enhances the oligomerization reaction to yield higher oligomers. We also studied the effect of AppA in the clay mediated oligomerization reaction of the activated nucleotides. Oligomerization of 2-amino-benzimidazole derivative of 5'-AMP gave higher oligomers containing up to nine monomer units in the presence of AppA.

Prabahar, K. Joseph↗
NASA NTRS1995

Performance of a focused cavity aerosol spectrometer for measurements in the stratosphere of particle size in the 0.06-2.0-micrometer-diameter range

A focused cavity aerosol spectrometer aboard a NASA ER-2 high-altitude aircraft provided high-resolution measurements of the size of the stratospheric particles in the 0.06-2.0-micrometer-diameter range in flights following the eruption of Mount Pinatubo in 1991. Effects of anisokinetic sampling and evaporation in the sampling system were accounted for by means adapted and specifically developed for this instrument. Calibrations with monodisperse aerosol particles provided the instrument's response matrix, which upon inversion during data reduction yielded the particle size distributions. The resultant dataset is internally consistent and generally shows agreement to within a factor of 2 with comparable measurements simultaneously obtained by a condensation nuclei counter, a forward-scattering spectrometer probe, and aerosol particle impactors, as well as with nearby extinction profiles obtained by satellite measurements and with lidar measurements of backscatter.

Jonsson, H. H.↗
NASA NTRS1993

Catalysis and prebiotic RNA synthesis

The essential role of catalysis for the origins of life is discussed. The status of the prebiotic synthesis of 2',5'- and 3'5'-linked oligomers of RNA is reviewed. Examples of the role of metal ion and mineral catalysis in RNA oligomer formation are discussed.

Ferris, James P.↗
NASA NTRS1993

In-situ measurements of changes in stratospheric aerosol and the N2O-aerosol relationship inside and outside of the polar vortex

Two optical particle counters on the ER-2, together covering a particle size diameter range from 0.1 microns to 23 microns, were used to measure the aerosol bulk quantities integral number, aerosol surface and volume, as well as detailed size distributions inside and outside of the polar vortex in the lower stratosphere. While AAES I (Arctic Airborne Stratospheric Expedition, (Dec. 88 - Feb. 89) was conducted in a period of relative volcanic quiescence, enhancements in aerosol number, surface and volume of factors around 10, 25 and 100 were observed during AASE 2 (Aug. 91 - Mar. 92) due to the eruption of Mt. Pinatubo. The changes in these bulk quantities as well as in the size distributions measured both outside and inside the polar vortex are presented and compared with those obtained in polar stratospheric cloud events (AASE I). Except for a shift towards larger aerosol mixing ratios the general shape of correlograms between the measured N2O and particle mixing ratios remain similar before and after the eruption. Similar correlograms are used to interpret data from vertical profiles inside and outside of the polar vortex.

Borrmann, S.↗
NASA NTRS1994

Physical and optical properties of the Pinatubo volcanic aerosol: Aircraft observations with impactors and a Sun-tracking photometer

As determined in situ by impactor samplers flown on an ER-2 at 16.5- to 20.7-km pressure altitude and on a DC-8 at 9.5- to 12.6-km pressure altitudes, the 1991 Pinatubo volcanic eruption increased the particle surface area of stratospheric aerosols up to 50-fold and the particle volume up to 2 orders of magnitude. Particle composition was typical of a sulfuric acid-water mixture at ER-2 altitudes. Ash particles coated with sulfuric acid comprised a significant fraction of aerosol at DC-8 altitudes. Mie-computed light extinction increased up to 20-fold at midvisible and greater than 100-fold at near-IR wavelengths. The optical thickness measured through the aerosol layer by an autotracking Sun photometer aboard a DC-8 aircraft at 10.7- to 11.3-km pressure altitudes shows a spectral shape that is similar to the Mie-calculated spectral extinction at ER-2 altitudes. Surface area distributions calculated by inversion of spectral optical depth measurements show characteristics that are similar to the mean surface area distribution resulting from 35 in situ measurements.

Pueschel, R. F.↗
NASA NTRS1994

Evolution of Pinatubo aerosol near 19 km altitude over western North America

Stratospheric aerosols, collected near 19 km altitude on wire impactors over western North America from August 20, 1991 to May 11, 1993, show strong influence of the June 1991 Mt. Pinatubo eruption. Lognormal size distributions are bimodal; each of the mode radii increases and reaches maximum value at about 15 months after eruption. The second (large particle) mode becomes well developed then, and about 40% of the droplets are larger than 0.4 micron radius. The eruption of Mt. Spurr (Alaska) may also have contributed to this. Sulfate mass loading decays exponentially (e-folding 216 days), similar to El Chichon. Silicates are present in samples only immediately after eruption. Two years after eruption, sulfate mass loading is about 0.4 micrograms/cu m, about an order of magnitude higher than background pre-volcanic values. Aerosol size distributions are still bimodal with a very well-defined large droplet mode.

Goodman, Jindra↗
NASA NTRS1995

ISSOL Meeting, Barcelona, Spain, 1993

Topics in a conference on the origins of life and the evolution of the biosphere include the origin of chirality, prebiotic chemistry of small biomolecules, primitive polymer formation, RNA regulation and control. Early origins of life and the ecology of hydrothermal systems such as ocean floor vents and their simple organisms are examined. The process of mineral catalysis in Montmorillonite as a model for early metabolism is used. The origin of the genetic code and the development of branching in molecular structures of amino acids is described. Studies are reported of the effects of meteorite impact on early Earth life.

Ferris, James P.↗
NASA NTRS1995

Photodissociation of cyanoacetylene: Application to the atmospheric chemistry of Titan

The quantum yield and reaction threshold for the photochemical dissociation of cyanoacetylene into a hydrogen atom and the cyanoethynyl radical have been determined. The quantum yield at 185 nm is approximately 0.09. The threshold is approximately 240 nm. Combination of this data with literature values shows that production of excited-state cyanoacetylene is the major primary process resulting from irradiation between 185 and 254 nm. Also determined are the relative rate constants for the abstraction of a hydrogen atom from hydrogen, methane, and ethane by the cyanoethynyl radical (k(H2):k(CH4):k(C2H6) = 1:9.3:63). Implications of these results for the proposal that hydrogen abstraction plays an important role in the conversion of methane to ethane and in the protection of unsaturated compounds from photoconsumption in the atmosphere of Titan are discussed.

Clarke, David W.↗
NASA NTRS1995

Automatic force balance calibration system

A system for automatically calibrating force balances is provided. The invention uses a reference balance aligned with the balance being calibrated to provide superior accuracy while minimizing the time required to complete the calibration. The reference balance and the test balance are rigidly attached together with closely aligned moment centers. Loads placed on the system equally effect each balance, and the differences in the readings of the two balances can be used to generate the calibration matrix for the test balance. Since the accuracy of the test calibration is determined by the accuracy of the reference balance and current technology allows for reference balances to be calibrated to within +/-0.05% the entire system has an accuracy of +/-0.2%. The entire apparatus is relatively small and can be mounted on a movable base for easy transport between test locations. The system can also accept a wide variety of reference balances, thus allowing calibration under diverse load and size requirements.

Ferris, Alice T.↗
NASA NTRS1996

Development of a hermetically sealed brushless DC motor for a J-T cryocooler

This development was sponsored by Ball Aerospace for the Cryogenic On-Orbit LongLife Active Refrigerator (COOLLAR) program. The cryocooler is designed to cool objects to 65 K and operate in space for at least 7 years. The system also imports minimal impact to the spacecraft in terms of vibration and heat. The basic Joule-Thompson cycle involves compressing a working fluid, nitrogen in this case, at near-constant temperature from 17.2 KPa to 6.89 MPa. The nitrogen is then expanded through a Joule-Thompson valve. The pure nitrogen gas must be kept clean; therefore, any contamination from motor organic materials must be eliminated. This requirement drove the design towards sealing of the motor within a titanium housing without sacrificing motor performance. It is estimated that an unsealed motor would have contributed 1.65 g of contaminants, due to the organic insulation and potting materials, over the 7-year life. This paper describes the motor electrical and mechanical design, as well as the sealing difficulties encountered, along with their solutions.

Joscelyn, Edwin↗
NASA NTRS1995

Development of a Probabilistic Component Mode Synthesis Method for the Analysis of Non-Deterministic Substructures

Standard methods of structural dynamic analysis assume that the structural characteristics are deterministic. Recognizing that these characteristics are actually statistical in nature, researchers have recently developed a variety of methods that use this information to determine probabilities of a desired response characteristic, such as natural frequency, without using expensive Monte Carlo simulations. One of the problems in these methods is correctly identifying the statistical properties of primitive variables such as geometry, stiffness, and mass. This paper presents a method where the measured dynamic properties of substructures are used instead as the random variables. The residual flexibility method of component mode synthesis is combined with the probabilistic methods to determine the cumulative distribution function of the system eigenvalues. A simple cantilever beam test problem is presented that illustrates the theory.

Brown, Andrew M.↗
NASA NTRS1994

Aerosol Abundances and Optical Characteristics in the Pacific Basin Free Troposphere

During NASA's Global Backscatter Experiment (GLOBE) mission flights in November 1989 and May 1990, a DC-8 research aircraft probed the Pacific Basin free troposphere for about 90 flight hours in each month between +72 and -62 degrees latitude, +130 and -120 degrees longitude, and up to 39,000 feet pressure altitudes. Aerosols were sampled continuously in situ by optical particle counters to measure concentration and particle size, and during 48 10-min intervals during each mission by wire impactors for concentration, size, composition, phase and shape analyses. The optical particle counters cover a particle diameter range between 0.3 and 20 microns; wire impactors extend the range down to 0.03 microns. Results of particle number, size, shape, together with the assumption of a refractive index corresponding to (NH4)2SO4 to account for the prevalence of aerosol sulfur, were utilized in a Mie algorithm to calculate aerosol extinction and backscatter for a range of wavelengths (0.385 less than lambda less than 10.64 microns). Computations for 22 randomly selected size distributions yield coefficients of extinction E(0.525) = (2.03 +/- 1.20) x 10(exp -4) km(exp -1) and backscatter beta(0.525) = (6.45 +/- 3.49) x 10(exp -6) km(exp -1) sr(exp -1) in the visible, and E(10.64) = (8.13 +/- 6.47) x 10(exp -6) km(exp -1) and beta(10.64) = (9.98 +/- 10.69) x 10(exp -8) km(exp -1) sr(exp -1) in the infrared, respectively. Large particles (D greater than 0.3 microns) contribute two-thirds to the total extinction in the visible (lambda = 0.525 microns), and almost 100% in the infrared (lambda = 10.64 microns). These results have been used to define an IR optical aerosol climatology of the Pacific Basin free troposphere, from which it follows that the infrared backscatter coefficient at lambda = 9.25 microns wavelength fluctuates between 5.0 x 10(exp -10) and 2.0 x 10(exp -7) km(exp -1) sr(exp -1) with a modal value 2.0 x 10(exp -8) km(exp -1) sr(exp -1).

Pueschel, R. F.↗
NASA NTRS1996

Probabilistic Component Mode Synthesis of Nondeterministic Substructures

Standard methods of structural dynamic analysis assume that the structural characteristics are deterministic. Recognizing that these characteristics are actually statistical in nature researchers have recently developed a variety of methods that use this information to determine probabilities of a desired response characteristic, such as natural frequency, without using expensive Monte Carlo simulations. One of the problems in these methods is correctly identifying the statistical properties of primitive variables such as geometry, stiffness, and mass. We present a method where the measured dynamic properties of substructures are used instead as the random variables. The residual flexibility method of component mode synthesis is combined with the probabilistic methods to determine the cumulative distribution function of the system eigenvalues. A simple cantilever beam test problem is presented that illustrates the theory.

Brown, Andrew M.↗
NASA NTRS1993

In-Situ Measurements of Changes in Stratospheric Aerosol and the N2O - Aerosol Relationship inside and outside of the Polar Vortex

Two optical particle counters on the ER-2, together covering a particle size diameter range from 0.1 micrometers to 23 micrometers, were used to measure the aerosol bulk quantities integral number, aerosol surface and volume, as well as detailed size distributions inside and outside of the polar vortex in the lower stratosphere. While AASE I (Arctic Airborne Stratospheric Expedition, (Dec. 1988 - Feb. 1989) was conducted in a period of relative volcanic quiescence, enhancements in aerosol number, surface and volume of factors around 10, 25 and 100 were observed during AASE II (Aug. 1991 - Mar. 1992) due to the eruption of Mt. Pinatubo. The changes in these bulk quantities as well as in the size distributions measured both outside and inside the the polar vortex are presented and compared with those obtained in polar stratospheric cloud events (AASE I). Except for a shift towards larger aerosol mixing ratios the general shape of correlograms between the measured N2O and particle mixing ratios remain similar before and after the eruption. Similar correlograms are used to interpret data from vertical profiles inside and outside of the polar vortex.

Borrmann, S.↗
NASA NTRS1996

Synthesis of long Prebiotic Oligomers on Mineral Surfaces

Most theories of the origin of biological organization assume that polymers with lengths in the range of 30-60 monomers are needed to make a genetic system viable. But it has not proved possible to synthesize plausibly prebiotic polymers this long by condensation in aqueous solution, because hydrolysis competes with polymerization. The potential of mineral surfaces to facilitate prebiotic polymerization was pointed out long ago. Here we describe a system that models prebiotic polymerization by the oligomerization of activated monomers -both nucleotides and amino acids. We find that whereas the reactions in solution produce only short oligomers (the longest typically being a 10-mer), the presence of mineral surfaces (montmorillonite for nucleotides, illite and hydroxylapatite for amino adds) induces the formation of oligomers up to 55 monomers long. These are formed by successive "feedings" with the monomers; polymerization takes place on the mineral surfaces in a manner akin to solid-phase synthesis of biopolymers.

Ferris, James P.↗
NASA NTRS1997

Organic Chemistry in Interstellar Ices: Connection to the Comet Halley Results

Mass spectroscopic measurements on the gas and dust in the coma of Comet Halley revealed the presence of considerable amounts of organic species. Greenberg (1973) proposed that prior to the formation of the comet UV processing of the ice mantles on grains in dense clouds could lead to the formation of complex organic molecules. Theoretical predictions of the internal UV field in dense clouds as well as the discovery in interstellar ices of species like OCS and OCN- which have been formed in simulation experiments by photoprocessing of interstellar ice analogues point to the importance of such processing. We undertook a laboratory simulation study of the formation of organic molecules in interstellar ices and their possible relevance to the Comet Halley results.

Schutte, W. A.↗
NASA NTRS1998

Application of the Probabilistic Dynamic Synthesis Method to the Analysis of a Realistic Structure

The Probabilistic Dynamic Synthesis method is a new technique for obtaining the statistics of a desired response engineering quantity for a structure with non-deterministic parameters. The method uses measured data from modal testing of the structure as the input random variables, rather than more "primitive" quantities like geometry or material variation. This modal information is much more comprehensive and easily measured than the "primitive" information. The probabilistic analysis is carried out using either response surface reliability methods or Monte Carlo simulation. A previous work verified the feasibility of the PDS method on a simple seven degree-of-freedom spring-mass system. In this paper, extensive issues involved with applying the method to a realistic three-substructure system are examined, and free and forced response analyses are performed. The results from using the method are promising, especially when the lack of alternatives for obtaining quantitative output for probabilistic structures is considered.

Brown, Andrew M.↗
NASA NTRS1998

Application of the Probabilistic Dynamic Synthesis Method to Realistic Structures

The Probabilistic Dynamic Synthesis method is a technique for obtaining the statistics of a desired response engineering quantity for a structure with non-deterministic parameters. The method uses measured data from modal testing of the structure as the input random variables, rather than more "primitive" quantities like geometry or material variation. This modal information is much more comprehensive and easily measured than the "primitive" information. The probabilistic analysis is carried out using either response surface reliability methods or Monte Carlo simulation. In previous work, the feasibility of the PDS method applied to a simple seven degree-of-freedom spring-mass system was verified. In this paper, extensive issues involved with applying the method to a realistic three-substructure system are examined, and free and forced response analyses are performed. The results from using the method are promising, especially when the lack of alternatives for obtaining quantitative output for probabilistic structures is considered.

Brown, Andrew M.↗