Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Metal Oxide Varistor (MOV) Lifetime Estimation with Impulse-Based Testing in PV Inverter Systems: Preprint

Surges caused by lightning strikes could damage electrical components in photovoltaic (PV) systems. Metal oxide varistors (MOVs) are commonly used to protect PV systems from lightning strikes. In this paper, a holistic impulse-based MOV lifetime estimation framework is proposed. The impacts of peak current and fault duration induced by lightning events are considered in the MOV lifetime estimation framework. Moreover, the impact of different parameter combinations on MOV lifetime estimation is analyzed. The effectiveness of the proposed work is validated in a PV inverter test system developed in MATLAB/Simulink.

lifetime estimation↗

Using Fiducial Markers for Pose Estimation of an OSWEC in a Wave Tank: Preprint

In this study, we consider a novel method of sensing the motion of a wave energy converter during testing in a wave flume under the influence of incoming waves. The wave energy converter considered in our research is an oscillating surge wave energy converter, which is a hinged paddle that responds to incoming waves. Motion sensing is normally done with inertial sensors, which can hinder the motion due to suspended cables that carry power and transmit signals. Our proposed method is contactless and can be implemented economically. A camera is used to record different marker patterns affixed to the moving paddle and the motion deduced by pose estimation algorithms. Fiducial markers are commonly used for robot localization and in augmented reality. There are many types of fiducial markers, including ArUco-type markers which are accurate, fast and robust. The system consists of markers attached to the paddle element and recorded using a machine vision camera. A pose estimation algorithm is then applied to the detected markers to estimate the tilt of the paddle. In this work, we examine the challenges of image acquisition and calibration for underwater targets, compare the motion obtained by this new system with a calibrated tilt sensor and identify areas where the new system may be superior.

computer vision↗

Effect of Image Classification Accuracy on Dasymetric Population Estimation

Dasymetric mapping involves the disaggregation of count data, usually relating to population/demographics, from census enumeration areas to smaller target zones with the aid of an ancillary layer related to population density. The ancillary layer is often a binary classification such as developed versus undeveloped, building versus non-building, and residential versus non-residential, in which one class is treated as populated and the other as unpopulated. While dasymetric mapping relies heavily on ancillary data, little research has been done to address the error in ancillary data and its effects on dasymetric mapping accuracy. This chapter reports our research effort to investigate the effect of image classification accuracy on dasymetric population estimates by developing a binomial classification of buildings from high-resolution remote sensor imagery. The classifier was systematically and iteratively manipulated to generate a series of outputs with variegated accuracy characteristics. Lastly, we generated a corresponding series of population estimates based on the mapped building area from each iteration to investigate the relationship between the accuracy of classification and population estimation.

McKee, Jacob↗

Application of an equation‐oriented framework to formulate and estimate parameters of chemical looping reaction models

Abstract Accurate, predictive reaction models are critical for the design and optimization of chemical looping combustion (CLC) reactors. The formulation and estimation of kinetic parameters for these reaction models using a first‐principles equation‐oriented (EO) approach is particularly beneficial as large amounts of experimental data spanning process‐relevant conditions can be used to estimate parameters in a computationally tractable way. This work demonstrates the application of a novel EO framework to develop reduction reaction kinetic models of an iron‐based CLC oxygen carrier (OC). An optimization problem is formulated to estimate kinetic parameters that provide the best fit to the experimental data. The model predicts the state of the OC with mean square error values of 2.5%–4.4% across the full range of validation data, including multiple reduction cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Estimating rates and patterns of diversification with incomplete sampling: a case study in the rosids

Premise Recent advances in generating large‐scale phylogenies enable broad‐scale estimation of species diversification. These now common approaches typically are characterized by (1) incomplete species coverage without explicit sampling methodologies and/or (2) sparse backbone representation, and usually rely on presumed phylogenetic placements to account for species without molecular data. We used empirical examples to examine the effects of incomplete sampling on diversification estimation and provide constructive suggestions to ecologists and evolutionary biologists based on those results. Methods We used a supermatrix for rosids and one well‐sampled subclade (Cucurbitaceae) as empirical case studies. We compared results using these large phylogenies with those based on a previously inferred, smaller supermatrix and on a synthetic tree resource with complete taxonomic coverage. Finally, we simulated random and representative taxon sampling and explored the impact of sampling on three commonly used methods, both parametric (RPANDA and BAMM) and semiparametric (DR). Results We found that the impact of sampling on diversification estimates was idiosyncratic and often strong. Compared to full empirical sampling, representative and random sampling schemes either depressed or inflated speciation rates, depending on methods and sampling schemes. No method was entirely robust to poor sampling, but BAMM was least sensitive to moderate levels of missing taxa. Conclusions We suggest caution against uncritical modeling of missing taxa using taxonomic data for poorly sampled trees and in the use of summary backbone trees and other data sets with high representative bias, and we stress the importance of explicit sampling methodologies in macroevolutionary studies.

59 BASIC BIOLOGICAL SCIENCES↗

Estimation of 14 MeV neutron rate from triton burn-up in future W7-X deuterium plasma campaigns

Fast ion confinement is of major importance for the ignition of a burning fusion plasma. In future deuterium plasma campaigns of the Wendelstein 7-X stellarator, W7-X, the amount of triton burn-up is one possible measure for fast ion confinement. A well-established technique to observe triton burn-up is the 14 MeV neutron rate. In this paper, it is estimated whether an existing scintillating fibre neutron detector is also suited to measure triton burn-up in W7-X with sufficient accuracy. In this work, an estimation is presented, which can be applied to any tokamak or stellarator design and is one-dimensional in the minor radius. The inputs are profiles of density, temperature, and differential volume element as well as the triton slowing-down time. The estimation calculates the thermal deuteron fusion rate and the associated deuteron-triton fusion rate; thus, the triton burn-up generated 14 MeV neutron rate. It neither takes triton diffusion nor explicit losses into account. This thermally generated fusion rate is compared to the neutral beam injection heating induced beam-plasma fusion rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Riverscape heterogeneity in estimated Chinook Salmon emergence phenology and implications for size and growth

Abstract Many salmonid‐bearing rivers exhibit thermal and hydrologic heterogeneity at multiple spatial and temporal scales, but how this translates into spatiotemporal patterns of fry emergence is poorly understood. Understanding this variability is important because emergence timing determines the biophysical conditions fish first experience (e.g., temperature, flow, and food supply), thereby influencing growth opportunities and survival during this critical life stage. We predicted spring Chinook Salmon ( Oncorhynchus tshawytscha ) emergence phenology across four northeastern Oregon subbasins over 5–9 years using empirical spawning and temperature data. We then related interannual emergence timing estimates to juvenile salmon size and growth rates at consistent sampling locations. There were clear longitudinal patterns of predicted emergence timing in each subbasin: The shape of these patterns was consistent among years, but not among subbasins. In two subbasins, emergence occurred progressively later with distance upstream, whereas in the other two subbasins emergence was earliest at upstream sites. Within each year, median emergence dates among sites within each subbasin ranged between 44 and 58 days. This spatial variation was comparable to interannual variation, with median emergence dates for a given location in each subbasin ranging between 47 and 74 days among years. Contrary to our expectations, juvenile salmon were not larger in years with earlier emergence, owing to slower estimated spring and summer growth rates compared to years with later emergence. Despite large interannual variation in estimated emergence dates, these results suggest that other factors (e.g., stream flow, temperature, and density‐dependence) were more important than growth duration in determining juvenile salmon growth rates and size among years. We demonstrated considerable spatial and interannual variation in emergence phenology within these subbasins. Understanding how this variation translates to spatiotemporal patterns of juvenile salmon habitat use, growth, and survival has important implications for guiding restoration efforts and understanding how climate change may impact these populations.

Kaylor, Matthew J.↗

Utility of near‐surface phenology in estimating productivity and evapotranspiration across diverse ecosystems

Abstract Agroecosystems, which include row crops, pasture, and grass and shrub grazing lands, are sensitive to changes in management, weather, and genetics. To better understand how these systems are responding to changes, we need to improve monitoring and modeling carbon and water dynamics. Vegetation Indices (VIs) are commonly used to estimate gross primary productivity (GPP) and evapotranspiration (ET), but these empirical relationships are often location and crop specific. There is a need to evaluate if VIs can be effective and, more general, predictors of ecosystem processes through time and across different agroecosystems. Near‐surface photographic (red‐green‐blue) images from PhenoCam can be used to calculate the VI green chromatic coordinate (G CC ) and offer a pathway to improve understanding of field‐scale relationships between VIs and GPP and ET. We synthesized observations spanning 76 site‐years across 15 agroecosystem sites with PhenoCam G CC and GPP or ET estimates from eddy covariance (EC) to quantify interannual variability (IAV) in the relationship between GPP and ET and G CC across. We uncovered a high degree of variability in the strength and slopes of the G CC ∼ GPP and ET relationships (R 2 = 0.1 ‐ 0.9) within and across production systems. Overall, G CC is a better predictor of GPP than ET (R 2 = 0.64 and 0.54, respectively), performing best in croplands (R 2 = 0.91). Shrub‐dominated systems exhibit the lowest predictive power of G CC for GPP and ET but have less IAV in slope. We propose that PhenoCam estimates of G CC could provide an alternative approach for predictions of ecosystem processes.

Environmental Sciences & Ecology↗

“Third-body” collision parameters for hydrocarbons, alcohols, and hydroperoxides and an effective internal rotor approach for estimating them

Collision rate constants and third-body collision efficiencies are calculated for more than 300 alkanes, alcohols, and hydroperoxides, for the bath gases He, Ar, H 2 , and N 2 , and from 300 to 2000 K. The data set includes highly branched species and species with as many as 16 nonhydrogen atoms N , and it is analyzed to develop strategies for estimating collision properties more generally. Simple analytic formulas describing the Lennard-Jones collision parameters $σ$ and $ε$ are obtained for each of the three classes of systems as a function of N . Trends in the collision efficiency range parameter $α$ = $\langle$Δ E d $\rangle$ are more complicated, and a method is developed and validated for estimating $α$ based on the numbers and types of internal rotors and oxygen-containing groups. Specifically, the approach maps the expected value of $α$ for a branched alkane, alcohol, or hydroperoxide onto those for the corresponding normal (linear) series via an effective number of nonhydrogen atoms N eff . The prescription for N eff is based on counting internal rotor types and is shown to be insensitive to temperature and fairly insensitive to the identity of the bath gas. Together, these strategies allow for the ready estimation of the collision parameters $σ$, $ε$, and $α$ so long as results for the associated linear series are available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of satellite Leaf Area Index in California vineyards for improving water use estimation

Remote sensing estimation of evapotranspiration (ET) directly quantifies plant water consumption and provides essential information for irrigation scheduling, which is a pressing need for California vineyards as extreme droughts become more frequent. Many ET models take satellite-derived Leaf Area Index (LAI) as a major input, but how uncertainties of LAI estimations propagate to ET and the partitioning between evaporation and transpiration is poorly understood. Here we assessed six satellite-based LAI estimation approaches using Landsat and Sentinel-2 images against ground measurements from four vineyards in California and evaluated ET sensitivity to LAI in the thermal-based two-source energy balance (TSEB) model. We found that radiative transfer modeling-based approaches predicted low to medium LAI well, but they significantly underestimated high LAI in highly clumped vine canopies (RMSE ~ 0.97 to 1.27). Cubist regression models trained with ground LAI measurements from all vineyards achieved high accuracy (RMSE ~ 0.3 to 0.48), but these empirical models did not generalize well between sites. Red edge bands and the related vegetation index (VI) from the Sentinel-2 satellite contain complementary information of LAI to VIs based on near-infrared and red bands. TSEB ET was more sensitive to positive LAI biases than negative ones. Positive LAI errors of 50% resulted in up to 50% changes in ET, while negative biases of 50% in LAI caused less than 10% deviations in ET. However, even when ET changes were minimal, negative LAI errors of 50% led to up to a 40% reduction in modeled transpiration, as soil evaporation and plant transpiration responded to LAI change divergently. These findings call for careful consideration of satellite LAI uncertainties for ET modeling, especially for the partitioning of water loss between vine and soil or cover crop for effective vineyard irrigation management.

54 ENVIRONMENTAL SCIENCES↗

Laser-Induced Plasma as a Method for the Metallic Materials Hardness Estimation: An Alternative Approach

The application of an alternative laser-induced breakdown spectroscopy (LIBS) method based on transversely excited atmospheric (TEA) CO2 laser was investigated for the first time for estimating the hardness of metallic materials. The human eye-safe (TEA) CO2 laser, operating at 10.6 µm, was used for plasma generation. The LIBS spectra were recorded by employing a cost-effective CCD camera for the time-integrated and spatial resolved measurements. The cast iron and aluminum alloys samples with different hardness have been tested. The ratio between the magnesium ionic and neutral lines in LIBS spectra was applied for estimating the material hardness. In addition, the hardness of all samples included in this study was determined using the conventional method for material hardness determination, i.e. Vickers hardness test. The linear dependence of magnesium lines intensity ratio on the sample’s hardness was obtained for both kinds of materials. Profilometric measurements were used to verify that the newly-introduced method is almost nondestructive for the investigated metals. The results obtained in the present work confirmed the potential of using this original LIBS system not only for the fast elemental analysis but also for the direct estimation of the hardness of metals and alloys. © 2020, Springer Science+Business Media, LLC, part of Springer Nature.

36 MATERIALS SCIENCE↗

Estimation of soil classes and their relationship to grapevine vigor in a Bordeaux vineyard: advancing the practical joint use of electromagnetic induction (EMI) and NDVI datasets for precision viticulture

Working within a vineyard in the Pessac Léognan Appellation of Bordeaux, France, this study documents the potential of using simple statistical methods with spatially-resolved and increasingly available electromagnetic induction (EMI) geophysical and normalized difference vegetation index (NDVI) datasets to accurately estimate Bordeaux vineyard soil classes and to quantitatively explore the relationship between vineyard soil types and grapevine vigor. First, co-located electrical tomographic tomography (ERT) and EMI datasets were compared to gain confidence about how the EMI method averaged soil properties over the grapevine rooting depth. Then, EMI data were used with core soil texture and soil-pit based interpretations of Bordeaux soil types (Brunisol, Redoxisol, Colluviosol and Calcosol) to estimate the spatial distribution of geophysically-identified Bordeaux soil classes. A strong relationship (r = 0.75, p < 0.01) was revealed between the geophysically-identified Bordeaux soil classes and NDVI (both 2 m resolution), showing that the highest grapevine vigor was associated with the Bordeaux soil classes having the largest clay fraction. The results suggest that within-block variability of grapevine vigor was largely controlled by variability in soil classes, and that carefully collected EMI and NDVI datasets can be exceedingly helpful for providing quantitative estimates of vineyard soil and vigor variability, as well as their covariation. The method is expected to be transferable to other viticultural regions, providing an approach to use easy-to-acquire, high resolution datasets to guide viticultural practices, including routine management and replanting.

54 ENVIRONMENTAL SCIENCES↗

Recalibrating Best Practices, Challenges, and Limitations of Estimating Tree Transpiration Via Sap Flow

Purpose: Transpiration dominates hydrologic fluxes from terrestrial ecosystems to the atmosphere. Sap flow is the most widely used method to quantify transpiration, and calibrations can improve the accuracy of these estimates. Despite numerous suggestions to perform and apply sap flow calibrations, seemingly few reports apply these recommendations. Here, we sought to determine the prevalence of calibration across sap flow methodology. Recent Findings: In this work, we reviewed tree sap flow literature over the past nine years and determined that only 5.3% of these publications documented the performance of calibrations, the application of coefficients from previous calibrations, or the application of correction factors using calibration data to ensure or improve accuracy of transpiration estimates. These data indicate that calibration has not been adopted as a best practice. However, these data may also reflect challenges to the performance and application of calibration indicating fundamental limitations of sap flow methods. Summary: We highlight the need for testing critical assumptions regarding calibration; specifically, that coefficients derived from calibrations on small stems are suitable for application to large stems and that different calibration approaches yield similar transpiration estimates. We encourage researchers to adopt calibration as a best practice for sap flow data and to explain how calibration was performed, how calibration data were applied, and to acknowledge and justify circumstances that preclude or do not necessitate calibration. Without the adoption of calibration and an improved understanding of its limitations, our understanding of transpiration and ability to quantify it using this technology will remain inadequate.

54 ENVIRONMENTAL SCIENCES↗

Quantum circuit fidelity estimation using machine learning

The computational power of real-world quantum computers is limited by errors. When using quantum computers to perform algorithms which cannot be efficiently simulated classically, it is important to quantify the accuracy with which the computation has been performed. In this work, we introduce a machine learning-based technique to estimate the fidelity between the state produced by a noisy quantum circuit and the target state corresponding to ideal noise-free computation. Our machine learning model is trained in a supervised manner, using smaller or simpler circuits for which the fidelity can be estimated using other techniques like direct fidelity estimation and quantum state tomography. Here we demonstrate that, for simulated random quantum circuits with a realistic noise model, the trained model can predict the fidelities of more complicated circuits for which such methods are infeasible. In particular, we show that the trained model may make predictions for circuits with higher degrees of entanglement than were available in the training set and that the model may make predictions for non-Clifford circuits even when the training set included only Clifford-reducible circuits. This empirical demonstration suggests classical machine learning may be useful for making predictions about beyond-classical quantum circuits for some non-trivial problems.

97 MATHEMATICS AND COMPUTING↗

Estimation of hydraulic conductivity in a watershed using sparse multi-source data via Gaussian process regression and Bayesian experimental design

Enhanced water management systems depend on accurate estimation of subsurface hydraulic properties. However, geologic formations can vary significantly, so information from a single source (e.g., widely spaced boreholes) is insufficient in characterizing subsurface aquifer properties. Therefore, multiple sources of information are needed to complement the hydrogeology understanding of a region. Here, this study presents a numerical framework in which information from different measurement sources is combined to characterize the 3D random field in a multi-fidelity prediction model. Coupled with the model, a Bayesian experimental design was used to determine the best future sampling locations. The Upper Sangamon watershed in east-central Illinois was selected as the case study site, where the multi-fidelity Gaussian process model was used to estimate the hydraulic conductivity in the region of interest. Multi-source observation data were obtained from electrical resistivity and borehole pumping tests. The accuracy of the model prediction is dependent on the locations and the distribution of both high- and low-fidelity data. Furthermore, the multi-fidelity model was compared with the single-fidelity model. The uncertainties and confidence in the measurements and parameter estimates were quantified and used to design future cycles of data collection to further improve the confidence intervals.

54 ENVIRONMENTAL SCIENCES↗

A statistical and simulation-informed model for estimating permeability from pore size distribution in saturated geomaterials

Accurate permeability estimation is essential across subsurface engineering applications but remains challenging due to the complex pore structures of natural geomaterials. Traditional empirical methods and simplified theoretical models often inadequately capture the role of pore size distribution and connectivity. Here, this study develops a statistical and simulation-informed permeability model that collapses pore-scale complexity into a compact scaling of the form k = αϕμ d 2 , where ϕ is porosity, μ d is mean pore size, and α is a weakly varying coefficient. By combining pore network simulations with statistical analysis of unimodal and bimodal pore size distributions, we identify three key findings: (i) permeability is much more sensitive to mean pore size than to porosity; (ii) across extensive datasets, the ratio σ d /μ d (standard deviation to mean) clusters around a characteristic value ∼0.4, allowing the effects of the full pore size distribution to be represented by μ d and a narrowly varying α ≈ 0.05; and (iii) for bimodal systems, there exists a critical fraction of small pores ∼0.78 above which flow becomes small-pore dominated, enabling the definition of an effective flow-controlling pore population and facilitating simplified permeability estimation for such systems. The resulting model, which requires only porosity and a representative mean pore size as inputs, is validated against comprehensive experimental datasets (>1700 samples) spanning diverse soils and rocks and achieves good predictive accuracy. Overall, this work provides a physically grounded yet practically simple permeability estimator suitable for subsurface engineering, environmental protection, and resource management applications.

Permeability↗

Physics-informed graphical neural network for power system state estimation

State estimation is highly critical for accurately observing the dynamic behavior of the power grids and minimizing risks from cyber threats. However, existing state estimation methods encounter challenges in accurately capturing power system dynamics, primarily because of limitations in encoding the grid topology and sparse measurements. Here, this paper proposes a physics-informed graphical learning state estimation method to address these limitations by leveraging both domain physical knowledge and a graph neural network (GNN). We employ a GNN architecture that can handle the graph-structured data of power systems more effectively than traditional data-driven methods. The physics-based knowledge is constructed from the branch current formulation, making the approach adaptable to both transmission and distribution systems. The validation results of three IEEE test systems show that the proposed method can achieve lower mean square error more than 20% than the conventional methods.

43 PARTICLE ACCELERATORS↗

Vapor–liquid equilibrium estimation of n-alkane/nitrogen mixtures using neural networks

Understanding fluid phase behavior, like VLE, in high P&T conditions is crucial for developing high-fidelity simulations of chemically reacting flows in liquid-fueled combustion systems and also forms an integral part of the design-modeling of the control processes in chemical industries. Two data-driven models have been proposed here in this study, each of which was competent in estimating VLE for the Type III binary systems of C 10 /N 2 and C 12 /N 2 , at pressures ranging up to 50–60 MPa. Both models showed better performance in predicting equilibrium pressure as compared to VLE modeled using PR-EOS. A modified model has also been proposed, capable of estimating the full phase envelope for the binary systems of C 10 /N 2 and C 12 /N 2 across a wide range of temperatures, and thus exhibit the mixture critical pressure at the concerned temperature. The diverse applicability of the proposed network architecture was further exhibited while estimating the VLE of a ternary system of C 1 /C 10 /N 2 .

97 MATHEMATICS AND COMPUTING↗