Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXAFS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Rates of Water Exchange for Two Cobalt(II) Heteropolyoxotungstate Compounds in Aqueous Solution

Polyoxometalate ions are used as ligands in water-oxidation processes related to solar energy production. An important step in these reactions is the association and dissociation of water from the catalytic sites, the rates of which are unknown. Here we report the exchange rates of water ligated to Co II atoms in two polyoxotungstate sandwich molecules using the 17 O-NMR-based Swift–Connick method. The compounds were the [Co 4 (H 2 O) 2 (B-α-PW 9 O 34 ) 2 ] 10– and the larger αββα-[Co 4 (H 2 O) 2 (P 2 W 15 O 56 ) 2 ] 16– ions, each with two water molecules bound trans to one another in a Co II sandwich between the tungstate ligands. The clusters, in both solid and solution state, were characterized by a range of methods, including NMR, EPR, FT-IR, UV-Vis, and EXAFS spectroscopy, ESI-MS, single-crystal X-ray crystallography, and potentiometry. For [Co 4 (H 2 O) 2 (B-α-PW 9 O 34 ) 2 ] 10– at pH 5.4, we estimate: k 298 =1.5(5)±0.3×10 6 s –1 , ΔH ≠ =39.8±0.4 kJ mol –1 , ΔS ≠ =+7.1±1.2 J mol –1 K –1 and ΔV ≠ =5.6 ±1.6 cm 3 mol –1 . For the Wells–Dawson sandwich cluster (αββα-[Co 4 (H 2 O) 2 (P 2 W 15 O 56 ) 2 ] 16– ) at pH 5.54, we find: k 298 =1.6(2)±0.3×10 6 s –1 , ΔH ≠ =27.6±0.4 kJ mol –1 ΔS ≠ =–33±1.3 J mol –1 K –1 and ΔV ≠ =2.2±1.4 cm 3 mol –1 at pH 5.2. The molecules are clearly stable and monospecific in slightly acidic solutions, but dissociate in strongly acidic solutions. Furthermore, this dissociation is detectable by EPR spectroscopy as S=3/2 Co II species (such as the [Co(H 2 O) 6 ] 2+ monomer ion) and by the significant reduction of the Co–Co vector in the XAS spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Metal-Organic Framework Containing Unusual Eight-Connected Zr–-Oxo Secondary Building Units and Orthogonal Carboxylic Acids for Ultra-sensitive Metal Detection

Two metal-organic frameworks (MOFs) with Zr-oxo secondary building units (SBUs) were prepared by using p,p'-terphenyldicarboxylate (TPDC) bridging ligands pre-functionalized with orthogonal succinic acid (MOF-1) and maleic acid groups (MOF-2). Single-crystal X-ray structure analysis of MOF-1 provides the first direct evidence for eight-connected SBUs in UiO-type MOFs. In contrast, MOF-2 contains twelve-connected SBUs as seen in the traditional UiO MOF topology. These structural assignments were confirmed by extended X-ray absorption fine structure (EXAFS) analysis. The highly porous MOF-1 is an excellent fluorescence sensor for metal ions with the detection limit of <0.5 ppb for Mn 2+ and three to four orders of magnitude greater sensitivity for metal ions than previously reported luminescent MOFs.

Carboni, Michaël↗

Probing the Behavior of Composition‐Tunable Ultrathin PtNi Nanowires for CO Oxidation and Small‐Molecule Electrocatalytic Reactions

We have successfully synthesized ultrathin nanowires of pure Pt, Pt 99 Ni 1 , Pt 9 Ni 1 , and Pt 7 Ni 3 using a modified room-temperature soft-template method. Analysis of both methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR) results found that the Pt 7 Ni 3 samples yielded the best performance with specific activities of 0.36 and 0.34 mA/cm 2 respectively. Additionally, formic acid oxidation reaction (FAOR) tests noted that both Pt and PtNi nanowires oxidize small organic molecules (SOMs) via an indirect pathway. CO oxidation data suggests little measurable performance without any pre-reduction treatment; however, after annealing in H 2 , we detected significantly improved CO 2 formation for both Pt 9 Ni 1 and Pt 7 Ni 3 motifs. These observations highlight the importance of pre-treating these nanowires under a reducing atmosphere to enhance their performance for CO oxidation. To explain these findings, we collected extended x-ray adsorption fine structure (EXAFS) spectroscopy data, consistent with the presence of partial alloying with a tendency for Pt and Ni to segregate, thereby implying the formation of a Pt-rich shell coupled with a Ni-rich core. Here, we also observed that the degree of alloying within the nanowires increased after annealing in a reducing atmosphere, a finding deduced through analysis of the coordination numbers and calculations of Cowley's short range order parameters.

36 MATERIALS SCIENCE↗

Mo 3 S 13 Chalcogel: A High-Capacity Electrode for Conversion-Based Li-Ion Batteries

Despite large theoretical energy densities, metal-sulfide electrodes for energy storage systems face several limitations that impact the practical realization. Here, we present the solution-processable, room temperature (RT) synthesis, local structures, and application of a sulfur-rich Mo 3 S 13 chalcogel as a conversion-based electrode for lithium-sulfide batteries (LiSBs). The structure of the amorphous Mo 3 S 13 chalcogel is derived through operando Raman spectroscopy, synchrotron X-ray pair distribution function (PDF), X-ray absorption near edge structure (XANES), and extended X-ray absorption fine structure (EXAFS) analysis, along with ab initio molecular dynamics (AIMD) simulations. A key feature of the three-dimensional (3D) network is the connection of Mo 3 S 13 units through S–S bonds. Li/Mo 3 S 13 half-cells deliver initial capacity of 1013 mAh g –1 during the first discharge. After the activation cycles, the capacity stabilizes and maintains 312 mAh g –1 at a C/3 rate after 140 cycles, demonstrating sustained performance over subsequent cycling. Such high-capacity and stability are attributed to the high density of (poly)sulfide bonds and the stable Mo–S coordination in Mo 3 S 13 chalcogel. Importantly, these findings showcase the potential of Mo 3 S 13 chalcogels as metal-sulfide electrode materials for LiSBs.

25 ENERGY STORAGE↗

Crystal Phase Distribution and Ferroelectricity in Ultrathin HfO 2 –ZrO 2 Bilayers

(Hf,Zr)O 2 ultrathin films are used as ferroelectric layers in emerging digital logic and nonvolatile memory devices. The ferroelectric properties of (Hf,Zr)O 2 can be improved by interface engineering, such as the formation of nanolaminates with distinct HfO 2 and ZrO 2 layers. Herein, the ferroelectric performance of HfO 2 –ZrO 2 ultrathin bilayer devices is shown to depend on the stacking order of HfO 2 and ZrO 2 , which affects the quantity of the noncentrosymmetric orthorhombic Pca 2 1 crystal phase. By combining X‐ray diffraction with a novel extended X‐ray absorption fine structure (EXAFS) analysis procedure, the orthorhombic, tetragonal, and monoclinic phase fractions are quantified for bilayers composed of 3 nm HfO 2 and 3 nm ZrO 2 . A significantly larger orthorhombic ZrO 2 phase fraction is found when ZrO 2 has an unconstrained surface during annealing, whereas the presence of a ZrO 2 interface with the substrate results in a substantial tetragonal ZrO 2 phase fraction and a 2.4× smaller remanent polarization. HfO 2 is found to be less susceptible than ZrO 2 to crystal phase templating. The methods presented herein enable mechanistic studies of ferroelectric wake‐up, fatigue, and processing effects in (Hf,Zr)O 2 films, accelerating the development of electronic devices that rely on ferroelectric oxides.

McBriarty, Martin E.↗

Amorphous K–Co–Mo–S x Chalcogel: A Synergy of Surface Sorption and Ion-Exchange

Chalcogel represents a unique class of meso- to macroporous nanomaterials that offer applications in energy and environmental pursuits. We report the synthesis of an ion-exchangeable amorphous chalcogel using a nominal composition of K 2 CoMo 2 S 10 (KCMS) at room temperature is reported. Synchrotron X-ray pair distribution function (PDF), X-ray absorption near-edge structure (XANES), and extended X-ray absorption fine structure (EXAFS) reveal a plausible local structure of KCMS gel consisting of Mo 5+ 2 and Mo 4+ 3 clusters in the vicinity of di/polysulfides which are covalently linked by Co 2+ ions. The ionically bound K + ions remain in the percolating pores of the Co–Mo–S covalent network. XANES of Co K-edge shows multiple electronic transitions, including quadrupole (1s→3d), shakedown (1s→4p + MLCT), and dipole allowed 1s→4p transitions. Remarkably, despite a lack of regular channels as in some crystalline solids, the amorphous KCMS gel shows ion-exchange properties with UO 2 2+ ions. Additionally, it also presents surface sorption via [S∙∙∙∙UO 2 2+ ] covalent interactions. Overall, this study underscores the synthesis of quaternary chalcogels incorporating alkali metals and their potential to advance separation science for cations and oxo-cationic species by integrating a synergy of surface sorption and ion-exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vanadium oxide based nanostructured materials for catalytic oxidative dehydrogenation of propane : effect of heterometallic centers on the catalyst performance.

Catalytic properties of a series of new class of catalysts materials-[Co{sub 3}(H{sub 2}O){sub 12}V{sub 18}O{sub 42} (XO{sub 4})].24H{sub 2}O (VNM-Co), [Fe{sub 3}(H{sub 2}O){sub 12}V{sub 18}O{sub 42}(XO{sub 4})].24H{sub 2}O (VNM-Fe) (X = V, S) and [H{sub 6}Mn{sub 3}(H{sub 2}O){sub 12}V{sub 18}O{sub 42}(VO{sub 4})].30H{sub 2}O for the oxidative dehydrogenation of propane is studied. The open-framework nanostructures in these novel materials consist of three-dimensional arrays of {l_brace}V{sub 18}O{sub 42}(XO{sub 4}){r_brace} (X = V, S) clusters interconnected by {l_brace}-O-M-O-{r_brace} (M = Mn, Fe, Co) linkers. The effect of change in the heterometallic center M (M = Mn, Co, Fe) of the linkers on the catalyst performance was studied. The catalyst material with Co in the linker showed the best performance in terms of propane conversion and selectivity at 350 C. The material containing Fe was most active but least selective and Mn containing catalyst was least active. The catalysts were characterized by Temperature Programmed Reduction (TPR), BET surface area measurement, Diffuse Reflectance Infrared Fourier Transform Spectroscopy, and X-ray Absorption Spectroscopy. TPR results show that all three catalysts are easily reducible and therefore are active at relatively low temperature. In situ X-ray absorption near edge spectroscopy (XANES) and extended X-ray absorption fine structure spectroscopy (EXAFS) studies revealed that the oxidation state of Co(II) remained unchanged up to 425 C (even after pretreatment). The reduction of Co(II) into metallic form starts at 425 C and this process is completed at 600 C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fischer–Tropsch Synthesis: XANES Spectra of Potassium in Promoted Precipitated Iron Catalysts as a Function of Time On-stream

XANES K-edge spectra of potassium promoter in precipitated Fe catalysts were acquired following activation by carburization in CO and as a function of time on-stream during the course of a Fischer–Tropsch synthesis run for a 100Fe:2K catalyst by withdrawing catalysts, sealed in wax product, for analysis. CO-activated and end-of-run spectra of the catalyst were also obtained for a 100Fe:5K catalyst. Peaks representing electronic transitions and multiple scattering were observed and resembled reference spectra for potassium carbonate or potassium formate. The shift in the multiple scattering peak to higher energy was consistent with sintering of potassium promoter during the course of the reaction test. The catalyst, however, retained its carbidic state, as demonstrated by XANES and EXAFS spectra at the iron K-edge, suggesting that sintering of potassium did not adversely affect the carburization rate, which is important for preventing iron carbides from oxidizing. This method serves as a starting point for developing better understanding of the chemical state and changes in structure occurring with alkali promoter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced lithium ion transport in garnet-type solid state electrolytes

Al-substituted Li 7 La 3 Zr 2 O 12 samples processed under argon show enhanced Li-ion transport and interfacial properties in symmetrical cells with lithium electrodes, compared to those prepared in air. In particular, the samples prepared under argon have higher ionic conductivities and lower interfacial impedances in symmetrical lithium cells, and show better DC cycling characteristics. The electronic conductivities are also somewhat higher. Pellets subjected to thermal treatment under the two types of atmospheres have different colors but exhibit similar microstructures. X-ray diffraction experiments suggest that there are slight structural differences between the two types of samples, but few dissimilarities were observed in elemental composition, distribution of ions, oxidation states, or bond lengths using laser-induced breakdown spectroscopy (LIBS), x-ray photoelectron spectroscopy (XPS), and extended x-ray absorption fine structure spectroscopy (EXAFS) to analyze the materials. Additionally, there was no evidence that La or Zr were reduced during the processing under Ar. Possible explanations for the improved electrochemical properties of the sample prepared under Ar compared to the one prepared in air include differences in grain boundary chemistries and conductivities and/or a small concentration of oxygen vacancies in the former.

25 ENERGY STORAGE↗

Flux Pinning Mechanism in BaSnO{sub 3}-Added GdBa{sub 2}Cu{sub 3}O{sub 7-x} Films with Different Thickness

Types of flux pinning mechanism in pure and BaSnO{sub 3} (BSO)-added GdBa{sub 2}Cu{sub 3}O{sub 7-x} (GdBCO) superconducting films have been determined by using the Dew-Hughes model. We have found that as the BSO content increases up to 4 wt%, dominant pinning mechanism of GdBCO films has changed from normal surface pinning due to intrinsic linear defects to normal point pinning by BSO addition. Careful analysis on the scaling of the flux pinning for the 4 wt% BSO-doped GdBCO films with various film thicknesses revealed that the pinning mechanism came from the hybrid pinning of two kinds of pinning types. In addition to the normal point pinning by BSO addition, another type of Δκ-pinning was observed to be prominent in the thinner films in low magnetic field region as normal point pinning was deteriorated. Through the EXAFS analysis, it was found that the Δκ-pinning is possibly originated from the oxygen deficiency in localized position. These results suggested that film thickness directly affects the flux pinning mechanism of the BSO-doped GdBCO films, and in the application point of view, an optimization of the film thickness may be crucial to operate normal point pinning induced by BSO addition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopic and structural characterization of reduced technetium species in acetate media

The reduction of ammonium pertechnetate by sodium borohydride in 0.1 M NaOH/glacial acetic acid has been studied. The reduction products (solids and solutions) have been characterized by UV-Visible spectroscopy, Scanning Electron Microscopy/Energy-dispersive X-ray emission spectroscopy (SEM/EDS), and X-ray absorption fine structure (XAFS) spectroscopy. UV-Visible spectra of the solution, after reduction, exhibit bands at 350 and 500 nm that have been attributed to the formation of polymeric Tc(IV) species. SEM/EDS on the solid (X-ray amorphous) indicates the absence of metallic Tc and the presence of oxygen. EXAFS measurements further indicate that the precipitate exhibits a [Tc({mu}-O){sub 2}Tc] core structure. XANES is consistent with the formation of Tc(III) and/or Tc(IV). Results infer that reduction of aqueous Tc(VII) by borohydride in the presence of acetic acid does not produce metallic Tc, but a mixture of various oxidation states of Tc near Tc(III) and Tc(IV).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

An evaluation of Pt sulfite acid (PSA) as precursor for supported Pt catalysts

As a catalyst precursor, platinum sulfite acid (PSA) is easy to use and not relatively expensive, and is a potentially attractive precursor for many types of supported catalysts. The ultimate usefulness for many catalyst applications will depend on the extent that Pt can be dispersed and sulfur eliminated. To our knowledge, there exists no detailed characterization in the catalysis literature of PSA and the nanoparticulate Pt phases derived from it during catalyst pretreatment. To this end a series of supports including alumina, silica, magnesia, niobia, titania, magnesia and carbon were contacted with PSA solutions and subsequently analyzed with extended x-ray absorption fine structure (EXAFS) and x-ray absorption near edge structure (XANES) analysis, and x-ray photoelectron spectroscopy (XPS) to characterize the Pt species formed upon impregnation, calcination, and reduction. While all catalysts show retention of some S, reasonably small particle sizes with relatively little Pt-S can in some instances be produced using PSA. The amount of retained sulfur appears to decrease with decreasing surface acidity, although even the most acidic supports (niobia and silica) display some storage of S even while only Pt-O bands are observed after calcination or reoxidation. More sulfur was eliminated by high temperature calcinations followed by reduction in hydrogen, at the expense of increasing Pt particle size.

08 HYDROGEN↗

Effect of particle size and adsorbates on the L{sub 3}, L{sub 2} and L{sub 1} x-ray absorption near edge structure of supported Pt nanoparaticles.

Pt nano-particles from about 1 to 10 nm have been prepared on silica, alkali-silica, alumina, silica-alumina, carbon and SBA-15 supports. EXAFS spectra of the reduced catalysts in He show a contraction of the Pt-Pt bond distance as particle size is decreased below 3 nm. The bond length decreased as much as 0.13 {angstrom} for 1 nm Pt particles. Adsorption of CO and H{sub 2} lead to a increase in Pt-Pt bond distance to that near Pt foil, e.g., 2.77 {angstrom}. In addition to changes in the Pt bond distance with size, as the particle size decreases below about 5 nm there is a shift in the XANES to higher energy at the L{sub 3} edge, a decrease in intensity near the edge and an increase in intensity beyond the edge. We suggest these features correspond to effects of coordination (the decrease at the edge) and lattice contraction (the increase beyond the edge). At the L{sub 2} edge, there are only small shifts to higher energy at the edge. However, beyond the edge, there are large increases in intensity with decreasing particle size. At the L{sub 1} edge there are no changes in position or shape of the XANES spectra. Adsorption of CO and H{sub 2} also lead to changes in the L{sub 3} and L{sub 2} edges, however, no changes are observed at the L1 edge. Density Functional Theory and XANES calculations show that the trends in the experimental XANES can be explained in terms of the states available near the edge. Both CO and H{sub 2} adsorption result in a depletion of states at the Fermi level but the creation of anti-bonding states above the Fermi level which give rise to intensity increases beyond the edge.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Enhanced high temperature performance of MgAl2O4-supported Pt-BaO lean NOx trap catalysts

The structural and chemical characteristics of Pt/BaO lean-NO{sub x} trap (LNT) catalysts supported on {gamma}-Al{sub 2}O{sub 3} and MgAl{sub 2}O{sub 4} are compared in this study. The Pt-BaO/MgAl{sub 2}O{sub 4} sample shows relatively low NO{sub x} uptake at temperatures below 300 C, and the temperature of maximum NO{sub x} uptake (T{sub max}) is shifted to 350 C in comparison to that of Pt-BaO/Al{sub 2}O{sub 3} (T{sub max} {approx}250 C). More importantly, the NO{sub x} uptake over the MgAl{sub 2}O{sub 4}-supported catalyst at 350 C is twice that of the alumina-based one. The shift toward the higher temperature NO{sub x} uptake is explained by the larger interfacial area between Pt and BaO, due to smaller Pt clusters as evidenced by TEM and Pt L3 EXAFS. In situ TR-XRD results demonstrate that the formation of a BaAl{sub 2}O{sub 4} phase in the BaO/MgAl{sub 2}O{sub 4} LNT catalyst occurs at a temperature about 100 C higher than on BaO/Al{sub 2}O{sub 3}, which may also represent a beneficial attribute of the BaO/MgAl{sub 2}O{sub 4} LNT with respect to catalyst stability.

36 MATERIALS SCIENCE↗

Local Structure Around Nb Site of a Potential Thermoelectric Material La{sub 1/3}NbO{sub 3} from Temperature-Dependent Extended x-ray Absorption Fine Structure Spectroscopy

The effort to find thermoelectric materials suitable for different applications is an intense research topic of a large material science community. In this context, A-site-deficient La{sub 1/3}NbO{sub 3}, which shows an irreversible pressure-induced amorphization at above 15 GPa, has attracted recent attention. Here, we present a temperature-dependent Nb K-edge extended x-ray absorption fine structure (EXAFS) study of La{sub 1/3}NbO{sub 3} in the range 77-500 K probing the Nb-O bond correlations. These results are compared with the Nb-O bond correlations in two related oxides NbO{sub 2} and Nb{sub 2}O{sub 5}. In comparison with NbO{sub 2} and Nb{sub 2}O{sub 5}, the Nb-O bond mean square relative displacements in La{sub 1/3}NbO{sub 3} show much weaker temperature dependence revealing its enhanced spring constant. The “A” site deficiency in La{sub 1/3}NbO{sub 3} may allow the oxygen atoms to preserve their local geometry and thus are less responsive to the external stimuli like temperature, which may be important in determining the thermal and electrical conductivity properties of this system.

36 MATERIALS SCIENCE↗