Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EUTECTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Approximate formula for recalescence in binary eutectic alloys

Supercooling of a liquid prior to the nucleation of a solid and the subsequent rapid growth are necessary conditions for producing novel microstructures including metastable phases which are not formed by conventional solidification processes. Since containerless techniques, such as levitation and free fall of a sample, are capable of achieving a significant supercooling level of liquids, they are under consideration as possible techniques for material processing on earth and in space.

ALLOY STRUCTURE FORMATION↗

Materials corrosion in molten LiF-NaF-KF eutectic salt under different reduction-oxidation conditions

Molten fluoride salts such as FLiNaK (LiF-NaF-KF: 46.5-11.5-42 mol %) have been proposed for use as secondary reactor coolants, media for transfer of high temperature process heat from nuclear reactors to chemical plants, and for concentrated solar power thermal energy storage. In molten fluoride salts, passive oxide films are chemically unstable, and corrosion is driven largely by the thermodynamically driven dissolution of alloying elements into the molten salt environment. Two alloys, Hastelloy{sup R} N and 316L stainless steel were exposed to molten FLiNaK salt in a 316L stainless steel crucible under argon cover gas for 1000 hours at 850 deg. C. Graphite was present in some of the crucibles with the goal of studying corrosion behavior of relevant reactor material combinations. In addition, a technique to reduce alloy corrosion through modification of the reduction-oxidation state was tested by the inclusion of zirconium to the system. Corrosion of 316L stainless steel was noted to occur primarily through surface depletion of chromium, an effect that was enhanced by the presence of graphite. Hastelloy{sup R} N experienced weight gain through electrochemical plating of corrosion products derived from the 316L stainless steel crucible. In the presence of zirconium, both alloys gained weight through plating of zirconium and as a result formed intermetallic layers. (authors)

36 MATERIALS SCIENCE↗

Investigation on Reaction Probabilities for Cyclic Voltammetry of Zirconium in LiCl-KCl Eutectic Molten Salt via Reverse-Engineering Method

This work focuses on a reverse-engineering program design for the cyclic voltammetry (CV) method to help illustrating, enhancing, and providing robustness in detection probability of the reactions during an electrorefining process. Analyzing the reactions from CV plots for 1.07, 2.49, and 4.98 wt% of zirconium chloride (ZrCl{sub 4}) in a LiCl-KCl molten salt at 773 K under different scan rates from Hoover's study has been accomplished. The results provide the current (Amp) versus potential (V) to investigate the optimum probability of the reactions at each peak. All simulations have been done through the commercial software MATLAB by using various experimental values existing in the literature as a first guess (e.g., the diffusion coefficients, and formal potentials). Preliminary results indicate that the zirconium reactions at each peak from cathodic to anodic side for 1.07 wt% are as followed: combination of Zr{sup +2}/Zr and Zr{sup +4}/ Zr{sup +2} at approximately -1.15 V, Zr{sup +2}/Zr at -1.5 V, Zr{sup +4}/Zr at -1.85 V, 70% Zr/Zr{sup +4} and 30% Zr/Zr{sup +2} at -0.5 V, and Zr{sup +2}/ Zr{sup +4} at - 0.25 V. These mentioned peaks are similar for 2.49 wt% at different voltages. In addition, the highest anodic peak for 4.98 wt% is found to be a combination of 30% Zr/Zr{sup +4} and 70% Zr/Zr{sup +2}. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Electrochemical Behavior of Lanthanum in Molten LiF-NaF-KF 'Flinak' Eutectic Salt

In order to develop the Fluoride High- Temperature Reactor, an emerging Gen-IV reactor concept, a primary coolant cleanup system must be developed to allow online reprocessing of the primary molten fluoride salt. This research is focused on the determination of electrochemical properties of rare earths (REs) in molten fluoride salt related to the FHR. The FHR utilizes two fluoride salts. These fluoride salts are LiF-NaF-KF (46.5-11.5-42 mol%), melting point 454 deg. C, also known as 'Flinak', and LiFBeF{sub 2} (33-67 mol%), melting point 459 deg. C, also known as 'Flibe'. Flibe is selected as the primary coolant salt due to its low neutron cross-section (Li{sup 7}-enriched), superior heat transfer properties, and low melting point. However, due to the beryllium content in Flibe, it is highly toxic to humans and Flinak is preferred for the secondary and tertiary coolant salts. The work presented here is specifically focused on the behavior of lanthanum trifluoride (LaF{sub 3}) in molten Flinak. Furthermore, updated data and analysis regarding the electrochemical behavior of dysprosium trifluoride (DyF{sub 3}) is also presented. Previous work related to this topic was presented at the 2016 ANS winter conference. The goal of this research is to develop a contaminant cleanup system for the primary loop of the FHR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Time dependent chlorination of CeO 2 , La 2 O 3 and Nd 2 O 3 by ZrCl 4 dissolved in eutectic LiCl–KCl

Partial chlorination of CeO 2 , La 2 O 3 , and Nd 2 O 3 was achieved using ZrCl 4 dissolved in molten LiCl-KCl at 450°C over a period of 4-5 hr. ZrCl 4 was pre-volatilized into an argon stream to maintain a constant vapor pressure for equilibration with the salt. This approach was effective at maintaining the ZrCl 4 concentration at the solubility limit of 1.3 mol% in the molten salt throughout the duration of two of the chlorination experiments and within about 60% of the solubility limit in the third experiment. Based on the analysis of salt samples, fractional conversion after four hours of reaction for CeO 2 , and five hours for La 2 O 3 , and Nd 2 O 3 were calculated to be 0.97, 0.28, and 0.65 respectively. Assuming a shrinking core diffusion-limited model, the diffusivity of ZrCl 4 through the hypothesized ZrO 2 layer was calculated for the chlorination of CeO 2 , La 2 O 3 , and Nd 2 O 3 were 1.76 x 10 -10 cm 2 /sec, 7.85 x 10 -12 cm 2 /sec, and 7.42 x 10 -12 cm 2 /sec, respectively. Given the extremely low values calculated for diffusivity, it was concluded that the process is chemical reaction rate limited and that a complete reaction of each rare earth oxide could be achieved. Furthermore, a chemically controlled shrinking core model was shown to also fit the experimental data closely.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗