An Improved Pathway to Ethylene Glycol via CO 2
This report describes our efforts to develop a partial electrochemical oxidation process to produce formaldehyde selectively from methanol. The effort examined numerous potential anode materials in pursuit of 70% Faradaic efficiency for conversion of methanol to formaldehyde. Among the various electrode materials tested herein both Pt and PtRu were identified as the most promising catalysts in this process as the Faradaic efficiency obtained in these cases are 40% and >70% respectively. Several other 3d transition metals, Pt group metals and their alloys were also studied in which the Faradaic efficiency was obtained within 5-30%. In case of Pt and PtRu bulk metal electrode shows higher selectivity to formaldehyde compared to their nanostructured materials. Based on the literature, nanostructured Pt and PtRu are considered as active catalysts for methanol fuel cells, thus, lower selectivity to formaldehyde with nano Pt and PtRu in our case was attributed to their preferential oxidation of methanol to CO 2 . Severe catalyst deactivation was noted when 0.5 (M) sulfuric acid was used as the electrolyte irrespective of catalyst formulation. On the other hand, much higher activity and selectivity for formaldehyde was noted when alkaline electrolyte was employed during oxidation. Considering selective electrochemical oxidation of methanol to formaldehyde is an area which is underexplored as of today, our findings about catalyst formulation and process condition is noteworthy in this direction. Both bulk metal electrodes of Pt and PtRu may be cost prohibitive and thus present challenges to the scale up this technology. Therefore, we recognize that additional efforts are needed to develop catalysts with high activities and Faradaic efficiencies similar to bulk electrodes for the electrooxidation of methanol to formaldehyde.