Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

A combined hard x-ray photoelectron spectroscopy and electrical characterisation study of metal/SiO{sub 2}/Si(100) metal-oxide-semiconductor structures

Combined hard x-ray photoelectron spectroscopy (HAXPES) and electrical characterisation measurements on identical Si based metal-oxide-semiconductor structures have been performed. The results obtained indicate that surface potential changes at the Si/SiO{sub 2} interface due to the presence of a thin Al or Ni gate layer can be detected with HAXPES. Changes in the Si/SiO{sub 2} band bending at zero gate voltage and the flat band voltage for the case of Al and Ni gate layers derived from the silicon core levels shifts observed in the HAXPES spectra are in agreement with values derived from capacitance-voltage measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of orientation anisotropy on calculating effective electrical conductivities

This paper develops an analytical effective medium theory (EMT) equation for calculating the effective conductivity of a mixture based on Maxwell's and Maxwell-Garnett’s theories, extended to higher volume fractions using Bruggeman's unsymmetrical treatment (BUT), with a long term goal of extending the treatment to mixtures more representative of real materials in order to calculate their effective electrical conductivity. The development accounts for spheroid shaped inclusions of varying degrees of anisotropic orientation. The orientation is described by the introduction of a distribution function. Two methodologies valid for the inclusion dilute limit were used to evaluate the effective conductivity: one based on Maxwell's far field approach, and the other based on the Maxwell-Garnett in the matrix approach. It was found that while the dilute limit equations for the effective conductivity were different, the final EMT equations derived by applying BUT collapsed to the same formula which was generalized for anisotropic orientation based on the distribution function presented.

36 MATERIALS SCIENCE↗

Electrical, magnetic, and magneto-electrical properties in quasi-two-dimensional K{sub 0.58}RhO{sub 2} single crystals doped with rare-earth elements

In this Letter, we studied the electrical transport, magnetic property, magnetoresistance and anomalous Hall properties of La-, Sm-, Ho-, and Dy-doped quasi-two dimensional K{sub 0.58}RhO{sub 2} single crystals. At low temperature (<10 K), a significant magnetoresistance (36%) can be observed in these samples. Accordingly, the “glassy ferromagnetism” is revealed by temperature-dependent magnetization in these samples. The significant magnetoresistance is related to the granular ferromagnetism. The unconventional anomalous Hall effect is also observed in magnetic atoms doped samples. Our finding shields more light on the magnetic, magnetoresistance, and anomalous Hall properties of quasi-two-dimensional material systems doped with magnetic ions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microscopic model for intersubband gain from electrically pumped quantum-dot structures

We study theoretically the performance of electrically pumped self-organized quantum dots as a gain material in the mid-infrared range at room temperature. We analyze an AlGaAs/InGaAs based structure composed of dots-in-a-well sandwiched between two quantum wells. We numerically analyze a comprehensive model by combining a many-particle approach for electronic dynamics with a realistic modeling of the electronic states in the whole structure. We investigate the gain both for quasi-equilibrium conditions and current injection. We find, comparing different structures, that steady-state gain can only be realized by an efficient extraction process, which prevents an accumulation of electrons in continuum states, that make the available scattering pathways through the quantum-dot active region too fast to sustain inversion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Theory of spin-coherent electrical transport through a defect spin state in a metal/insulator/ferromagnet tunnel junction undergoing ferromagnetic resonance

In this work, we describe the coherent dynamics of electrical transport through a localized spin-dependent state, such as is associated with a defect spin, at the interface of a ferromagnet and a nonmagnetic material during ferromagnetic resonance. As the ferromagnet magnetic moment precesses, charge carriers are dynamically spin filtered by the localized state, leading to a dynamic spin accumulation on the defect. Local effective magnetic fields modify the precession of a spin on the defect, which also modifies the time-integrated total charge current through the defect. Lastly, we thus identify a form of current-detected spin resonance that reveals the local magnetic environment of a carrier spin located at a defect, and thus potentially the defect’s identity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurements of the Electric Form Factor of the Neutron up to Q2 = 3.4 GeV2 using the Reaction He-3(e,e&#x27;n)pp

The electric form factor of the neutron was determined from studies of the reaction \rea{} in quasi-elastic kinematics in Hall A at Jefferson Lab. Longitudinally polarized electrons were scattered off a polarized target in which the nuclear polarization was oriented perpendicular to the momentum transfer. The scattered electrons were detected in a magnetic spectrometer in coincidence with neutrons that were registered in a large-solid-angle detector. More than doubling the $Q^2$-range over which it is known, we find \GEn{}$ = 0.0225 \pm 0.0017 (stat) \pm 0.0024 (syst)$, $0.0200 \pm 0.0023 \pm 0.0018$, and $0.0142 \pm 0.0019 \pm 0.0013$ for $Q^2$ = 1.72, 2.48, and 3.41~\gevsq, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electronic Scanning Strategies in Adaptive Electrical Capacitance Volume Tomography: Tradeoffs and Prospects

Electrical Capacitance Volume Tomography (ECVT) has been applied for imaging of multiphase flows found in industrial applications. The ill-posed nature of the image reconstruction problem in ECVT and the consequent low resolution can be alleviated by employing electronic scanning enabled by electrode segmentation and reconfiguration during data acquisition. Here we study electronic scanning strategies that mimic physical rotation and shifting of the sensor along its symmetry axis. First, we study the feasibility of electronic scanning by analyzing the capacitance transducer circuit in SPICE. Then, we simulate electronic scanning using the finite element method for different electrode shapes, for which we compare the image reconstruction results and acquisition time. We find a noticeable improvement in image resolution for the scanning cases over conventional ECVT. Lastly, among the scanning cases, we emphasize a particular electrode shape that provides the best image resolution along with the minimal amount of acquisition time.

47 OTHER INSTRUMENTATION↗

A High-Speed, Real-Time Visualization and State Estimation Platform for Monitoring and Control of Electric Distribution Systems: Implementation and Field Results

Continued deployment of renewable and distributed energy resources is fundamentally changing the way that electric distribution systems are controlled and operated; more sophisticated active system control and greater situational awareness are needed. Real-time measurements and distribution system state estimation (DSSE) techniques enable more sophisticated system control and, when combined with visualization applications, greater situational awareness. This paper presents a novel demonstration of a high-speed, real-time DSSE platform and related control and visualization functionalities, implemented using existing open-source software and distribution system monitoring hardware. Live scrolling strip charts of meter data and intuitive annotated map visualizations of the entire state (obtained via DSSE) of a real-world distribution circuit are shown. The DSSE implementation is validated to demonstrate provision of accurate voltage data. This platform allows for enhanced control and situational awareness using only a minimum quantity of distribution system measurement units and modest data and software infrastructure.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Electric Grid Reliability in an Era of Unprecedented Uncertainty: A Review of Advances in Electric Sector Resource Adequacy Assessment and Planning

Recent changes to the principal causes of energy shortage events on the electric grid have necessitated are thinking of paradigms for resource adequacy (RA) assessment and the related topic of procurement of a reliable portfolio. Prior studies have laid out elements of a modern paradigm for these planning activities, but there does not exist a comprehensive overview of the topic spanning academic and gray literature, and the relationship of these suggested paradigms to methods used in industry has also not been surveyed. In this paper we review recent literature establishing best practices for RA assessment and reliable portfolio procurement, and survey current practices used in industry in relation to these best practices. We establish seven key best practices for RA assessment, cover a modern methodology for capacity accreditation, and find that industry practices are not far behind the identified best practices, though some key gaps remain. We also present a suggested agenda for both academic research on the topic and opportunities for advancement in the industry.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Economic Analysis of an Electric Thermal Energy Storage System Using Solid Particles for Grid Electricity Storage

As renewable power generation becomes the mainstream new-built energy source, energy storage will become an indispensable need to complement the uncertainty of renewable resources to firm the power supply. When phasing out fossil-fuel power plants to meet the carbon neutral utility target in the midcentury around the world, large capacity of energy storage will be needed to provide reliable grid power. The renewable power integration with storage can support future carbon-free utility and has several significant impacts including increasing the value of renewable generation to the grid, improving the peak-load response, and balancing the electricity supply and demand. Long-duration energy storage (10–100 hours duration) can potentially complement the reduction of fossil-fuel baseload generation that otherwise would risk grid security when a large portion of grid power comes from variable renewable sources. Current energy storage methods based on pumped storage hydropower or batteries have many limitations. Thermal energy storage (TES) has unique advantages in scale and siting flexibility to provide grid-scale storage capacity. A particle-based TES system has promising cost and performance for the future growing energy storage needs. This paper introduces the system and components required for the particle TES to be technically and economically competitive. A technoeconomic analysis based on preliminary component designs and performance shows that the particle TES integrated with an efficient air-Brayton combined cycle power system can provide power for several days by low-cost, high-performance storage cycles. It addresses grid storage needs by enabling large-scale grid integration of intermittent renewables like wind and solar, thereby increasing their grid value. The design specifications and cost estimations of major components in a commercial scale system are presented in this paper. The cost model provides insights for further development and cost comparison with competing technologies.

27 ARPA - Advanced Research Projects Agency-Energy↗

Metastable Electrical Characteristics of Polycrystalline Thin-Film Photovoltaic Modules upon Exposure and Stabilization: Preprint

The significant features of a series of stabilization experiments conducted at the National Renewable Energy Laboratory (NREL) between May 2009 and the present are reported. These experiments evaluated a procedure to stabilize the measured performance of thin-film polycrystalline cadmium telluride (CdTe) and copper indium gallium diselenide (CIGS) thin-film photovoltaic (PV) modules. Thecurrent-voltage (I-V) characteristics of CdTe and CIGS thin-film PV devices and modules exhibit transitory changes in electrical performance after thermal exposure in the dark and/or bias and light exposures. We present the results of our case studies of module performance versus exposure: light-soaked at 65 degrees C; exposed in the dark under forward bias at 65 degrees C; and, finally,longer-term outdoor exposure. We find that stabilization can be achieved to varying degrees using either light-soaking or dark bias methods and that the existing IEC 61646 light-soaking interval may be appropriate for CdTe and CIGS modules with one caveat: it is likely that at least three exposure intervals are required for stabilization.

14 SOLAR ENERGY↗