Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Imaging and data processing with the Low Frequency Space Array

The Low Frequency Space Array (LFSA) is being designed to image the entire sky at extremely low radio frequencies with arcmin to subarcmin resolution. To accomplish this goal, data from LFSA will be continuously integrated for many months and then be used with aperture synthesis techniques to produce images. The three dimensional nature of LFSA and the effects of orbital geometry make LFSA a continuously evolving array which has an excellent synthesized point-response function. After transforming the data to produce an initial image, it is possible to remove low-level sidelobe responses remaining in the image and thereby produce a high dynamic-range image. Interference (both man-made and from solar-system objects) is a potential problem for LFSA, but appropriate data handling techniques are available which should eliminate any of its effects.

Simon, R. S.↗
NASA NTRS1988

The velocity structure and turbulence at the center of the Orion Nebula

Using the Coude Feed System of the Kitt Peak National Observatory at its highest possible dispersion and a CCD detector with wide dynamic range it was possible to examine in detail the radial and turbulent velocities of the Orion Nebula at the seeing limit. For the first time, multiple components of the spectral lines were resolved and the Gaussian profiles fit to them. Using four different observing runs, two circular areas 2 minutes in diameter were observed, the first centered on the theta sup 1 Orionis and the second centered on theta sup 2 Orionis. The velocity resolution of 1 km/s combined with the angular resolution of 2 seconds allowed observation in detail at line splitting as well as the location and measurement of high internal motions, about -50 km/s with respect to the bulk of ionized matter. Because over 900 different positions were measured, modern statistical techniques were used for the analysis of turbulence, so that the dispersion relation and the structure function could be calculated and compared with predictions of the Kolmogorov theory. The random motions showed correlation with spatial separation, as expected for turbulence; but comparison with predictions of the classical theory for nebular turbulence showed poor agreement. If Kolmogorov theory applies, then the energy must be input at many scales.

Castaneda, Hector O.↗
NASA NTRS1988

Construction and evaluation of an imaging focussed-mesh electron multiplier for space instrumentation

A focused-mesh electron multiplier (FMEM) has been combined with a wedge and strip position-sensitive anode to create a novel detector that is considered likely to have a number of applications in space astronomy and laboratory image sensing. Results from the first application of a wedge and strip anode to an FMEM are presented including spatial resolution, spatial linearity, background rate, and pulse risetime. The converted multiplier retains the attributes of an FMEM that made it attractive in the first place, such as low background, high speed, and high dynamic range.

Vallerga, J.↗
NASA NTRS1988

Charge coupled devices vs. microchannel plates in the extreme and far ultraviolet - A comparison based on the latest laboratory measurements

While microchannel plates (MCPs) have been established as imaging photon counters in the EUV and FUV for some years, CCDs are associated with low light level sensing at visible and near-IR wavelengths. Attention is presently given to recent proposals for CCDs' use as EUV and FUV detectors with quantum efficiencies sometimes exceeding those of MCPs; quantum resolution, format size, dynamic range, and long-term stability are also used as bases of comparison, for the cases of both space-based astronomical and spectroscopic applications.

Vallerga, J.↗
NASA NTRS1988

Preliminary results from the NASA/JPL multifrequency, multipolarization synthetic aperture radar

A brief description is given of the three-frequency polarimetric synthetic-aperture radar built and tested at the Jet Propulsion Laboratory. The radar has the capability to simultaneously acquire fully polarimetric data at P-, L-, and C-bands from a DC-8 airborne platform. The radar has an instantaneous data rate of approximately 2.1 Gb/s and has selectable record rates between 80-240 Mb/s. The system has a wide dynamic range featuring 8-b analog-to-digital converters and full digital floating-point processing. The processing is accomplished offline on a minicomputer system assisted by an array processor. Sample images are presented.

Held, Daniel N.↗
NASA NTRS1988

Spatial compression of Seasat SAR imagery

The results of a study of techniques for spatial compression of synthetic-aperture-radar (SAR) imagery are summarized. Emphasis is on image-data volume reduction for archive and online storage applications while preserving the image resolution and radiometric fidelity. A quantitative analysis of various techniques, including vector quantization (VQ) and adaptive discrete cosine transform (ADCT), is presented. Various factors such as compression ratio, algorithm complexity, and image quality are considered in determining the optimal algorithm. The compression system requirements are established for electronic access of an online archive system based on the results of a survey of the science community. The various algorithms are presented and their results evaluated considering the effects of speckle noise and the wide dynamic range inherent in SAR imagery. The conclusion is that although the ADCT produces the best signal-to-distortion-noise ratio for a given compression ratio, the two-level tree-searched VQ technique is preferred due to its simplicity of decoding and near-optimal performance.

Chang, C. Y.↗
NASA NTRS1988

The Hubble Space Telescope high speed photometer

The Hubble Space Telescope will provide the opportunity to perform precise astronomical photometry above the disturbing effects of the atmosphere. The High Speed Photometer is designed to provide the observatory with a stable, precise photometer with wide dynamic range, broad wavelenth coverage, time resolution in the microsecond region, and polarimetric capability. Here, the scientific requirements for the instrument are examined, the unique design features of the photometer are explored, and the improvements to be expected over the performance of ground-based instruments are projected.

Vancitters, G. W., Jr.↗
NASA NTRS1988

Optical and electrical measurements on UV sensitive photodiodes

The optical and electrical characteristics of the various types of photodiodes potentially useful for UV radiometers were studied. It was concluded that both GaAsP and GaP photodiodes have advantages over silicon photodiodes in terms of spectral response and UV stability. Both GaAsP and GaP have excellent electrical characteristics for low frequency radiometers, although their high capacitance could be inconvenient for high frequency applications. GaAsP is particularly good with respect to dynamic range.

Lyall, H.↗
NASA NTRS1988

Analog-to-digital conversion techniques for precision photometry

Three types of analog-to-digital converters are described: parallel, successive-approximation, and integrating. The functioning of comparators and sample-and-hold amplifiers is explained. Differential and integral linearity are defined, and good and bad examples are illustrated. The applicability and relative advantages of the three types of converters for precision astronomical photometric measurements are discussed. For most measurements, integral linearity is more important than differential linearity. Successive-approximation converters should be used with multielement solid state detectors because of their high speed, but dual slope integrating converters may be superior for use with single element solid state detectors where speed of digitization is not a factor. In all cases, the input signal should be tailored so that they occupy the upper part of the converter's dynamic range; this can be achieved by providing adjustable gain, or better by varying the integration time of the observation if possible.

Opal, Chet B.↗
NASA NTRS1988

An optical heterodyne densitometer

Researchers are developing an optical heterodyne densitometer with the potential to measure optical density over an unprecedented dynamic range with high accuracy and sensitivity. This device uses a Mach-Zender interferometer configuration with heterodyne detection to make direct comparisons between optical and RF attenuators. Researchers expect to attain measurements of filter transmittance down to 10 to the minus 12th power with better than 1 percent uncertainty. In addition, they intend to extend the technique to the problem of measuring low levels of light scattering from reflective and transmissive optics.

Migdall, A. L.↗
NASA NTRS1988

An albedo map of P/Halley on 13 March 1986

An albedo map is presented of comet Halley from a 10 micrometer image taken from the Wyoming Infrared Observatory on 13 Mar. 1986, and a 7311 A CCD image taken from the Anglo-Australian Telescope about an hour later. To construct this map, the CCD image was first converted from 0.49 arcsec/pixel to 1 arcsec/pixel to match the scale of the 10 micron image, then both were calibrated in lambda F sub lambda units. According to the albedo map, most of the inner coma of Halley lies between gamma = 0.04 and 0.08. The overall smoothness of the map is remarkable considering the large dynamic range of the optical and IR maps, and the differences in spatial resolution and image processing.

Hayward, Thomas L.↗
NASA NTRS1988

Real-time optical image processing techniques

Nonlinear real-time optical processing on spatial pulse frequency modulation has been pursued through the analysis, design, and fabrication of pulse frequency modulated halftone screens and the modification of micro-channel spatial light modulators (MSLMs). Micro-channel spatial light modulators are modified via the Fabry-Perot method to achieve the high gamma operation required for non-linear operation. Real-time nonlinear processing was performed using the halftone screen and MSLM. The experiments showed the effectiveness of the thresholding and also showed the needs of higher SBP for image processing. The Hughes LCLV has been characterized and found to yield high gamma (about 1.7) when operated in low frequency and low bias mode. Cascading of two LCLVs should also provide enough gamma for nonlinear processing. In this case, the SBP of the LCLV is sufficient but the uniformity of the LCLV needs improvement. These include image correlation, computer generation of holograms, pseudo-color image encoding for image enhancement, and associative-retrieval in neural processing. The discovery of the only known optical method for dynamic range compression of an input image in real-time by using GaAs photorefractive crystals is reported. Finally, a new architecture for non-linear multiple sensory, neural processing has been suggested.

Liu, Hua-Kuang↗
NASA NTRS1989

Theory and applications of optical fiber lever sensors

The evolution of optical fiber lever concepts is illustrated leading to several designs found useful in air and water applications. In particular, this technology has led to the development of underwater detectors of the pressure and pressure gradient kind. In addition, an optical microphone with features not found in condenser microphones has been utilized in the measurement of pressure fluctuations in high speed boundary layers requiring sensors of small size, extended bandwidth, wide dynamic range, and high temperature capability. Finally, similar concepts have been applied to the design of scale model acoustic arrays intended for acoustic imaging applications in the megahertz frequency range.

Cuomo, F. W.↗
NASA NTRS1988

High spatial resolution 10 micron imaging of IRC + 10216

Precise high-resolution 10-micron images of the carbon star IRC + 10216 have been obtained with a scanned linear array. The low noise and high dynamic range of these images permit deconvolution of the telescope point-spread function, revealing the radial brightness distribution of the circumstellar dust shell: approximate reflection symmetry is found in west-east scans, with a distinct division into two components of diameter about 0.40 and 2.2 arcsec. It is shown that this morphology is consistent with published interferometric data that had cast doubt upon an earlier, idealized two-component model. The observed brightness distribution implies that the circumstellar dust density may deviate substantially from the 1/r squared radial dependence expected for spherically symmetric outflow with constant velocity and constant rate of mass loss.

Bloemhof, E. E.↗
NASA NTRS1987

HIRIS - EOS instrument with high spectral and spatial resolution

The High-Resolution Imaging Spectrometer (HIRIS) is designed for NASA's Earth Observing System (EOS). It will have 10-nm wide spectral bands from 0.4-2.5 microns at 30 m spatial resolution over a 30 km swath. The spectral resolution allows identification of many minerals in rocks and soils, important algal pigments in oceans and inland waters, spectral changes associated with plant canopy biochemistry, composition of atmospheric aerosols, and grain size of snow and contamination by absorbing impurities. The bands will have 12-bit quantization over a dynamic range suitable for bright targets, such as snow. For targets of low brightness, such as water bodies, image-motion compensation will allow gains up to a factor of 8 to increase signal-to-noise ratios. The sensor will be able to point + or - 24 deg crosstrack and +60/-30 deg downtrack. In the 824-km orbit altitude proposed for EOS, the crosstrack pointing capability will allow 4-5 views during a 16-day revisit cycle.

Dozier, Jeff↗
NASA NTRS1988

Compact wide-aperture hyperbolic analyzers

Compact electrostatic analyzers that employ a new geometry are described. They accept collimated beams of ions through relatively wide (non-slit-like) inlet apertures and focus them at various locations, depending on the ion energy per charge, along rectangular position-sensing detectors. Each analyzer has a dynamic range of 10 or more for a fixed deflection voltage. The focal line width at a given energy is a small fraction of the inlet aperture width, and the focal lines are approximately coplanar.

Curtis, C. C.↗
NASA NTRS1989

A sub-millimetre aperture synthesis array for nonsolar planet detection

The possibility of using aperture synthesis to image other planetary systems at submillimeter wavelengths is considered. The approach requires only a small increase in dynamic range over that already demonstrated by the VLA at longer wavelengths. The values of the relevant parameters are calculated and presented.

Jones, Dayton L.↗
NASA NTRS1988

HIRIS - The High Resolution Imaging Spectrometer

The High-Resolution Imaging Spectrometer (HIRIS) is a JPL facility instrument designed for NASA's Earth Observing System (Eos).It will have 10-nm wide spectral bands from 0.4-2.5 microns at 30 m spatial resolution over a 30 km swath. The spectral resolution allows identification of many minerals in rocks and soils, important algal pigments in oceans and inland waters, spectral changes associated with plant canopy biochemistry, composition of atmospheric aerosols, and grain size of snow and its contamination by absorbing impurities. The bands wil have 12-bit quantization over a dynamic range suitable for bright targets, such as snow. For targets of low brightness, such as water bodies, image-motion compensation will allow gains up to a factor of eight to increase signal-to-noise ratios. In the 824-km orbit altitude proposed for Eos, the crosstrack pointing capability will allow 4-5 views during a 16-day revisit cycle.

Dozier, Jeff↗