Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dispersion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Method for boosting dispersive spectrograph stability 1000× using interferometry with crossfaded pairs of delays

We demonstrate a key step along a technical route to achieving cm/s scale accuracy for astronomical spectrographs over long (multi-year) time scales, which is critical for the Doppler characterization of Earth sized exoplanets, and measurement of small cosmic redshift drift over many years. This same technique also enables searching exoplanet atmospheres for biosignificant molecules in direct planet imaging using, otherwise, insufficiently low resolution and drift prone dispersive (grating or prism) spectrographs. Using a method called crossfading for externally dispersed interferometers (EDIs) to get highly robust spectra, we recently demonstrated a factor of 1000 x reduction in the net shift of an EDI measured ThAr line to a deliberate simulated wavelength translation of the detector. This 1000 x gain in disperser stability can be combined with conventional stability gains afforded by fiber scramblers, vacuum tanks, and thermal control, to provide an additional 1 to 3 orders of magnitude reduction in the net point spread function shift drift. Crossfading combines high- and low-delay fringing signals that react oppositely in phase to cancel their net reaction to a detector wavelength drift. This can be implemented by an interferometer addition to a facility spectrograph.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Longitudinal dispersion coefficient depending on superficial velocity of hydrogen isotopes flowing in column packed with zeolite pellets at 77.4 K

Authors have been developing a cryogenic pressure swing adsorption system for hydrogen isotope separation. In the problem of its design and operation, it is necessary to predict the concentration profiles developing in packed beds of adsorbent pellets. The profiling is affected by the longitudinal dispersion of gas flowing in packed beds, in addition to the mass transfer resistance in porous media of adsorbent pellets. In this work, an equation is derived for estimating the packed-bed dispersion coefficient of hydrogen isotopes, by analyzing the breakthrough curves of trace D{sub 2} or HD replacing H{sub 2} adsorbed in synthetic zeolite particles packed columns at the liquefied nitrogen temperature 77.4 K. Since specialized for hydrogen isotopes, this equation can be considered to estimate the dispersion coefficients more reliable for the cryogenic hydrogen isotope adsorption process, than the existing equations. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Relationships between Cloud Droplet Spectral Relative Dispersion and Entrainment Rate and Their Impacting Factors

Cloud microphysical properties are significantly affected by entrainment and mixing processes. However, it is unclear how the entrainment rate affects the relative dispersion of cloud droplet size distribution. Previously, the relationship between relative dispersion and entrainment rate was found to be positive or negative. To reconcile the contrasting relationships, the Explicit Mixing Parcel Model is used to determine the underlying mechanisms. When evaporation is dominated by small droplets, and the entrained environmental air is further saturated during mixing, the relationship is negative. However, when the evaporation of big droplets is dominant, the relationship is positive. Whether or not the cloud condensation nuclei are considered in the entrained environmental air is a key factor as condensation on the entrained condensation nuclei is the main source of small droplets. However, if cloud condensation nuclei are not entrained, the relationship is positive. If cloud condensation nuclei are entrained, the relationship is dependent on many other factors. High vertical velocity, relative humidity of environmental air, liquid water content, and low droplet number concentration are more likely to cause the negative relationship since new saturation is easier to achieve by evaporation of small droplets. Further, the signs of the relationship are not strongly affected by the turbulence dissipation rate, but the higher dissipation rate causes the positive relationship more significant for a larger entrainment rate. A conceptual model is proposed to reconcile the contrasting relationships. This work enhances the understanding of relative dispersion and lays a foundation for the quantification of entrainment-mixing mechanisms.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Growth and survival rates of dispersing free embryos and settled larvae of pallid sturgeon ( Scaphirhynchus albus ) in the Missouri River, Montana and North Dakota

We released nearly 1.0 million 1-day post-hatch (dph) and 5-dph pallid sturgeon (Scaphirhynchus albus) free embryos in the Missouri River on 1 July 2019 and sequentially captured survivors at multiple sites through a 240-km river reach to quantify daily growth and survival rates during the early life stages. Genetic analysis was used to assign captured fish to released family lots and known ages. Growth rate was similar (0.74–0.75 mm day –1 ) between the 1- and 5-dph age groups during the 3–4-day dispersal period when water temperature averaged 16.8 °C. Daily survival rate was 0.64 during 1–4 dph for the original 1-dph age group and 0.80 during 5–7 dph for the original 5-dph age group. Total survival during free embryo dispersal (hatch to 9 dph) was estimated as 0.0437. The transition from dispersing as free embryos to settling as benthic larvae was verified for fish originally released as 5 dph. Growth of settled larvae was quantified with a Gompertz model through 75 dph (9 September; 112 mm) when water temperature was 18.8–21.0 °C in the rearing areas. Settled larvae had an estimated daily survival rate of 0.96, and estimated total survival during 9–75 dph was 0.0714. This study provides the first empirical survival estimates for pallid sturgeon early life stages in natural settings and is one of few studies reporting similar information for other sturgeon species. Applications of this work extend to pallid sturgeon restoration programs where population models are being developed to predict recruitment potential and population responses to river management alternatives.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Design and engineering of dispersion and loss in photonic crystal fiber 1 × 4 power splitter (PCFPS) based on hole size alteration and optofluidic infiltration

We have presented a technique based on optofluidic infiltration and air-holes diameter variation together to design a 1 × 4 photonic crystal fiber power splitter (PCFPS) which have very low dispersion (D): (0 ≤ D ≤ 2.5 (ps/nm/km) and very low loss (L): 0 ≤ L ≤ 0.025(dB/cm) in a wide range of wavelengths (1100–1700 nm). This approach allows us to control the dispersion of the fundamental mode in a PCF beam splitter by choosing appropriate refractive indices for liquids and suitable diameters for air-holes in PCF power splitter. In fact, the techniques, used in this paper are complementary of each other and give us more excellent results which are better than other reported results in researchers’ works so far. In this work, a new design of 1 × 4 photonic crystal fiber power splitter is proposed by using beam propagation method. An optical Gaussian signal at a wavelength of third communication window range (1550 nm) is inserted into the central core and equally is divided into four core (25% of the total input power interred to each core). In addition, the physical behavior of coupling characteristics is obtained by using coupled mode analysis. Numerical simulations show that input optical signal can be equally divided in photonic crystal fiber structure with low dispersion and low loss. The total size of proposed PCFPS is 30 µm × 30 µm × 1.2 mm, too.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Fabrication of oxide dispersion strengthened bond coats with low Al 2 O 3 content [Fabrication of ODS bond coats with low Al 2 O 3 content]

Here, nanoscale oxide dispersions have long been used to increase the oxidation and wear resistance of alloys used as bond coatings in thermal barrier coatings. Their manufacturing via mechanical alloying is often accompanied by difficulties regarding their particle size, homogeneous distribution of the oxide dispersions inside the powder, involving considerable costs, due to cold welding of the powder during milling. A significant improvement in this process can be achieved by the use of process control agent (PCA) to achieve the critical balance between cold welding and fracturing, thereby enhancing the process efficiency. In this investigation, the influence of the organic additive stearic acid on the manufacturing process of Al 2 O 3 -doped CoNiCrAlY powder was investigated. Powders were fabricated via mechanical alloying at different milling times and PCA concentrations. The results showed a decrease in particle size, without hindering the homogeneous incorporation of the oxide dispersions. Two powders manufactured with 0.5 and 1.0 wt.% PCA were deposited by high velocity oxygen fuel (HVOF) spraying. Results showed that a higher content of elongated particles in the powder with the higher PCA content led to increased surface roughness, porosity and decreased coating thickness, with areas without embedded oxide particles.

36 MATERIALS SCIENCE↗
DOE OSTI2024

1,4-cineole: a bio-derived solvent for highly stable graphene nanoplatelet suspensions and well-dispersed UHMWPE nanocomposite fibers

The exceptional properties of carbon nanoparticles, such as graphene, promise to expand the performance and functionality of many materials. The reinforcement of polymers is of keen interest due to their low density and flexible manufacturing methods. However, dispersing graphene in them has proven to be an enduring challenge due to the particles’ propensity to form performance degrading agglomerations. Furthermore, effective solvents for nanoparticle dispersion are commonly harmful, non-renewable, petrochemicals. In this work, a bio-derived solvent, 1,4-cineole, is demonstrated as a renewable alternative to these solvents that can be used to form highly stable graphene nanoplatelet (GnP) suspensions and used to gel spin well-dispersed UHMWPE/GnP nanocomposite fibers. The GnP concentration in the fibers was varied across three orders of magnitude, 0.01 wt% to 1 wt%, to examine its effect on fiber microstructure and properties. At low concentrations the particles act as point defects without affecting the fiber microstructure, and poor particle/matrix interfacial adhesion results in significantly reduced mechanical properties. At 1 wt% GnPs, a network effect takes hold thereby reinforcing the fibers, but the particles also impede the growth and orientation of crucial load-carrying crystalline structures in the fiber. Furthermore, unveiling the microstructural effects of GnPs on highly oriented and crystalline polymers in this study provides crucial insights for future work developing high-performance polymer nanocomposite fibers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enforcing global constraints for the dispersion closure problem: τ 2 -SIMPLE algorithm

Permeability and effective dispersion tensors are critical parameters to characterize flow and transport in porous media at the continuum scale. Homogenization theory defines a framework in which such effective properties are first computed from solving a closure problem in a repeating unit cell of the periodic microstructure and then used in a macroscopic formulation for efficient computation. The closure problem is formulated as a local boundary value problem subjected to global constraints, which guarantee the uniqueness of the solution and can be difficult to satisfy for complex geometries and at high flow conditions. These constraints also ensure that pore-scale pressure, velocity, and concentration fields can be accurately reconstructed from the closure variable. Building on a previous work, here we present a framework that allows to satisfy global constraints associated to both the permeability and the dispersion closure problems by introducing two artificial time scales. The algorithm, called τ 2 -SIMPLE, computes both permeability and effective dispersion given an arbitrarily complex geometry and flow condition. Furthermore, this algorithm is demonstrated to be accurate for both 2D and 3D geometries across varying flow conditions, and thus it can be used to quickly characterize effective properties from porous media images in many applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Observational study of relationships between entrainment rate, homogeneity of mixing, and cloud droplet relative dispersion

The entrainment–mixing process is key to the cloud’s dynamical and microphysical processes. However, to the best of our knowledge, no study has quantitatively linked entrainment rate and homogeneity of mixing. Additionally, their combined effects on cloud droplet relative dispersion and physical mechanisms are even more unclear. This study analyzed the aircraft measurements of cumulus clouds collected in the Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems field campaign to identify these relationships. The relationship between the entrainment rate and homogeneous mixing degree was found to be moderately positive, and the underlying mechanisms related to mixing and evaporation time scales and environmental relative humidity were explored. The relationship between relative dispersion and entrainment rate changes from positive to negative with increasing entrainment rate, depending on the dominance of evaporation of large or small droplets. The relative dispersion first increases and then decreases with increasing homogeneous mixing degree, validating the results of previous model simulations. Further, the results shed new light on understanding the interactions between cloud microphysics and cloud dynamics through turbulent entrainment and mixing processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Impact of long-range electrostatic and dispersive interactions on theoretical predictions of adsorption and catalysis in zeolites

In this article, we review the importance of long-range zeolite framework interactions in theoretical predictions for a variety of zeolite-catalyzed processes, and we show why such interactions must be determined accurately in order to reproduce experimentally measured adsorption and activation energies. We begin with an overview of the different strategies that have been used to account for long-range coulombic and dispersive interactions of zeolite framework atoms with species adsorbed at an active site. These methods include full periodic-DFT calculations and multi-layer hybrid techniques. Electrostatic interactions are observed to have a more significant impact than dispersive interactions on the geometries of ion-pair transition states and adsorbed species. Stabilization of the TS relative to reactant complexes is also dictated by electrostatic interactions. Dispersion effects are found to significantly stabilize both transition and reactant states for adsorbed species, especially those which have dimensions that provide good fits within the zeolite pore or cavity. We also show that the relevance of particular active site configurations can be missed, if the effects of long-range interactions are neglected. As a case in point, we demonstrate that a site previously considered inactive for ethane dehydrogenation, [GaH 2 ] + may in fact be more active than previously thought, when the impact of long-range interactions on the predicted activation energy is taken into account. In conclusion, the use of hybrid quantum mechanics/molecular mechanics approaches on extended, finite zeolite clusters has emerged as an accurate, highly cost-effective, and versatile alternative towards overcoming some of the present-day limitations of periodic calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Optimization of matrix viscosity improves polypropylene fiber dispersion and properties of engineered cementitious composites

Engineered cementitious composites (ECC) is a durable cementitious material with high tensile ductility and strain-hardening characteristics. Although considered as a cost-effective fiber for ECC, polypropylene (PP) fiber is reportedly difficult to disperse in mortar matrix due to its high aspect ratio and hydrophobicity. In this study, the matrix viscosity of a low-carbon ECC based on limestone calcined clay cement was tailored as a variable to improve PP fiber dispersion under a pre-determined mixing protocol. The effect of matrix viscosity on the composite fresh and hardened properties was investigated experimentally. Results suggested an optimal range of matrix viscosity (10.3–11.5 Pa . s) favors the composite tensile strength and strain capacity at 28 days. At the optimal state with a 0.1 % viscosity modifying admixture (VMA)-to-binder mass ratio, PP-ECC achieved 7.0 % tensile strain capacity and 3.5 MPa ultimate tensile strength. When matrix viscosity falls outside the desired range, both ultimate tensile strength and strain capacity were diminished. By tailoring the VMA dosage, the matrix viscosity can be adjusted for desired fiber dispersion, workability, and mechanical properties. Finally, the findings of this study provide a technical reference for the practical design and application of PP-ECC.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Differences in spore size and atmospheric survival shape stark contrasts in the dispersal dynamics of two closely related fungal pathogens

A frequently ignored but critical aspect of microbial dispersal is survival in the atmosphere. Here, we exposed spores of two closely related, morphologically dissimilar, and economically important fungal pathogens to typical atmospheric environments and modeled their movement in the troposphere. Alternaria solani conidia are nearly 10 times larger than A. alternata conidia, but in our experiments, most died within 24 h, while over half of A. alternata conidia remained viable on day 12. Next, we modeled the movement of spores across North America. We predict 99% of the larger A. solani conidia settle within 24 h, with a maximum dispersal distance of 100 km. By contrast, most A. alternata conidia remain airborne for more than 12 days, and dispersal over long distances(2000 km) is likely. Counterintuitively, the larger A. solani conidia survive poorly, as compared to smaller A. alternata conidia, but also land sooner and move over shorter distances.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2016

Fast estimation of dense gas dispersion from multiple continuous CO 2 surface leakage sources for risk assessment

Surface leakage of CO 2 , and associated potential impacts on health, safety, and the environment (HSE) are considered hazards of geologic carbon sequestration (GCS). There are two challenges associated with impact assessment of CO 2 surface dispersion. First, the fact that CO 2 is a dense gas makes its dispersion in air a complex process. Rigorous numerical solutions for modeling concentration distributions are relatively time-consuming. Second, impact assessment requires consideration of uncertainty, e.g., quantification of how much uncertainty is propagated through input parameters to model outputs by carrying out large numbers of model runs. In order to assess the potential consequences of surface leakage of CO 2 , it is useful to have a model that executes very quickly for repeated model calculations (e.g., in Monte Carlo mode) of the atmospheric dispersion of CO 2 (concentrations as a function of space and time). In addition, the model should be able to handle multiple surface leakage sources. In this work, we have extended the nomograph approach of Britter and McQuaid (1988) for estimating dense gas plume length from single leakage source to multiple leakage sources. The method is very fast and therefore amenable to general system-level GCS risk assessment including uncertainty quantification within the framework of the National Risk Assessment Partnership (NRAP) Integrated Assessment Model (IAM). The method is conservative in that it assumes the wind could be from any direction, and it handles multiple sources by a simple superposition approach. The method produces results in reasonable agreement with a sophisticated computational fluid dynamics (CFD) code, but runs in a small fraction of the time.

58 GEOSCIENCES↗
DOE OSTI2022

Hot-melt extrudability of amorphous solid dispersions of flubendazole-copovidone: An exploratory study of the effect of drug loading and the balance of adjuvants on extrudability and dissolution

The FDA-approved anthelmintic flubendazole has shown potential to be repositioned to treat cancer and dry macular degeneration; however, its poor water solubility limits its use. Amorphous solid dispersions may overcome this challenge, but the balance of excipients may impact the preparation method and drug release. Here, we evaluate the influence of adjuvants and drug loading on the development of an amorphous solid dispersion of flubendazole-copovidone by hot-melt extrusion. The drug, copovidone, and adjuvants (magnesium stearate and hydroxypropyl cellulose) mixtures were statistically designed, and the process was performed in a twin-screw extruder. The study showed that flubendazole and copovidone mixtures were highly extrudable, except when drug loading was high (>40%). Furthermore, magnesium stearate positively impacted the extrusion and was more effective than hydroxypropyl cellulose. The extruded materials were evaluated by modulated differential scanning calorimetry and X-ray powder diffraction, obtaining positive amorphization and physical stability results. Pair distribution function analysis indicated the presence of drug rich domains with medium-range order structure and no evidence of polymer-drug interaction. All extrudates presented faster dissolution (HCl, pH 1.2) than pure flubendazole, and both adjuvants had a notable influence on the dissolution rate. In conclusion, hot-melt extrusion may be a viable option to obtain stable flubendazole: copovidone amorphous dispersions.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Understanding the dynamic evolution of atomically dispersed Cu catalyst for CO 2 electrochemical conversion using integrated XANES analysis and mechanistic studies

Direct electrochemical conversion of CO 2 to ethanol (CH 3 CH 2 OH) offers a promising strategy to lower CO 2 emission while storing energy from renewable electricity. Our recent study reported a carbon-supported atomically dispersed Cu catalyst that achieved the highest reported selectivity for CH 3 CH 2 OH formation (91%) at a relatively low potential (-0.6 V), however, the active site structure that is responsible for such high activity and selectivity has yet to be understood. Here, in this paper, we demonstrate a computational investigation combining X-ray absorption near edge structure (XANES) simulations and a mechanistic study via density functional theory (DFT) to understand the catalyst structures of this Cu catalyst during electrocatalysis and the corresponding reaction mechanisms of the key products. An integrated computational and experimental XANES analysis depicted the dynamic evolution of the catalytic site during electrocatalysis. The as-prepared, atomically dispersed Cu catalyst aggregates and forms metallic clusters/nanoparticles under electrochemical condition, which then break down to smaller oxidized clusters after electrocatalysis. The formed Cu clusters/nanoparticles showed distinct catalytic activity and selectivity as a function of particle size based on the mechanistic investigation using DFT, which is consistent with experimental observations for catalyst samples with different Cu loadings. This comprehensive study which combines experimental and computational XANES investigation, mechanistic study via DFT calculations, and experimental performance of the catalysts, provides unprecedented dynamic and mechanistic insights into the supported atomically dispersed metal catalysts for CO 2 reduction. Such strategy and details gained can further guide discovery of novel catalyst materials for CO 2 electrochemical reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Detailed measurements of local thickness changes for U-7Mo dispersion fuel plates with Al-3.5Si matrix after irradiation at different powers in the RERTR-9B experiment

The Materials Management and Minimization program is developing fuel designs to replace highly enriched fuel with fuels of low enrichment. Swelling is an important irradiation behavior that needs to be well understood. Data from high resolution thickness measurements performed on U-7Mo dispersion fuel plates with Al-Si alloy matrices that were irradiated at high power is sparse. This paper reports the results of detailed thickness measurements performed on two dispersion fuel plates that were irradiated at relatively high power to high fission densities in the Advanced Test Reactor in the same RERTR-9B experiment. Both plates were irradiated to similar fission densities, but one was irradiated at a higher power than the other. The goal of this work is to identify any differences in the swelling behavior when fuel plates are irradiated at different powers to the same fission densities. Based on the results of detailed thickness measurments, more swelling occurs when a U-7Mo dispersion fuel with Al-3.5Si matrix is irradiated to a high fission density at high power compared to one irradiated at a lower power to high fission density.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

ZrN coating as diffusion barrier in U(Mo) dispersion fuel systems

The control of the interaction between the U(Mo) fuel phase and the Al matrix is one of the challenges of dispersion fuel plate development for research reactors. Given the specific properties of this interaction layer, larger amounts of it in the meat could lead to a reduction of the plate mechanical integrity and thermal conductivity, eventually leading to pillowing. The SELENIUM project showed that by depositing a ZrN coating on the surface of the U(Mo) fuel particles, the amount of formed U(Mo)-Al interaction layer is limited but still present. Microstructural analysis performed on the as fabricated coating and fresh fuel plates containing ZrN coated U(Mo) dispersed in an Al matrix, revealed that the coating gets damaged during plate production. The post irradiation examinations (PIE) of the ZrN coated U(Mo) fuel plates, from the SELENIUM and SEMPER FIDELIS experiments, show how the U(Mo)-Al interaction layer is formed -only at those locations where the coating is missing or damaged -and the evolution of coating microstructure during irradiation. Finally, as a remedy, to further reduce the amount of interaction layer formed, the use of an Al-Si matrix was proposed based on the higher affinity of Si for U compared to the affinity of Al for U. PIE of a fuel plate consisting of ZrN coated U(Mo) dispersed in an Al-Si matrix irradiated in the SEMPER FIDELIS experiment, clearly demonstrates the benefit of adding Si to the matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Cold spray manufacturing of oxide-dispersion strengthened (ODS) steels using gas-atomized and ball-milled 14YWT powders

The cold spray deposition process has been investigated for the manufacture of 14YWT oxide-dispersion strengthened (ODS) steel, a nanostructured ferritic alloy (NFA), using gas-atomized and ball-milled feedstock powders. Cold spraying of the gas-atomized powder resulted in a thick dense deposit, but annealing them above 900 °C induced grain growth and heterogeneous precipitation of nanoparticles, thus resulting in lower hardness (~ 170 HV) compared to 14YWT ODS steel manufactured by the conventional method. The ball-milled powder (Fe-14Cr-3W-0.4Ti-0.2Y-0.125O) was cryomilled in liquid N 2 to achieve small particle sizes followed by annealing in a H 2 /Ar environment at 1000 °C and 1100 °C to reduce the hardness from ~ 8 GPa to ~ 5 GPa. Both smaller particle sizes and lower hardness of annealed powders made them amenable to the cold spray deposition process, resulting in thick and dense deposits, while retaining the favorable fully solutionized microstructure of the ball-milled powders. The microstructure of the as-deposited ODS exhibited very fine grain sizes (50–250 nm) with a uniform dispersion of Y-Ti-O nanoprecipitates in the ferritic steel matrix. The hardness values of the cold spray deposits using the powders annealed at 1000 °C and 1100 °C was 770 HV and 496 HV, respectively. Post-heat treatment of the as-deposited material up to 1100 °C showed a high-density microstructure with uniformly dispersed nanoscale oxide particles. The hardness of the annealed deposits up to 1000 °C had a notably higher hardness than bulk 14YWT ODS steel manufactured by conventional methods. The study demonstrates that cold spray deposition of the microstructurally-tailored feedstock powders can be used to successfully manufacture ODS steel with microstructure and properties comparable to those produced by the conventional methods, while providing for an attractive option for the more rapid and cost-effective manufacturing of ODS steel cladding tubes.

14YWT↗