Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

670 GHz Schottky Diode Based Subharmonic Mixer with CPW Circuits and 70 GHz IF

A coplanar waveguide (CPW) based subharmonic mixer working at 670 GHz using GaAs Schottky diodes. One example of the mixer has a LO input, an RF input and an IF output. Another possible mixer has a LO input, and IF input and an RF output. Each input or output is connected to a coplanar waveguide with a matching network. A pair of antiparallel diodes provides a signal at twice the LO frequency, which is then mixed with a second signal to provide signals having sum and difference frequencies. The output signal of interest is received after passing through a bandpass filter tuned to the frequency range of interest.

Chattopadhyay, Goutam↗
NASA NTRS2016

Bypass Diode Temperature Tests of a Solar Array Coupon Under Space Thermal Environment Conditions

Tests were performed on a 56-cell Advanced Triple Junction solar array coupon whose purpose was to determine margin available for bypass diodes integrated with new, large multi-junction solar cells that are manufactured from a 4-inch wafer. The tests were performed under high vacuum with coupon back side thermal conditions of both cold and ambient. The bypass diodes were subjected to a sequence of increasing discrete current steps from 0 Amp to 2.0 Amp in steps of 0.25 Amp. At each current step, a temperature measurement was obtained via remote viewing by an infrared camera. This paper discusses the experimental methodology, experiment results, and the thermal model.

Wright, Kenneth H., Jr.↗
NASA NTRS2016

By-Pass Diode Temperature Tests of a Solar Array Coupon Under Space Thermal Environment Conditions

Tests were performed on a 56-cell Advanced Triple Junction solar array coupon whose purpose was to determine margin available for bypass diodes integrated with new, large multi-junction solar cells that are manufactured from a 4-inch wafer. The tests were performed under high vacuum with cold and ambient coupon back-side. The bypass diodes were subjected to a sequence of increasing discrete current steps from 0 Amp to 2.0 Amp in steps of 0.25 Amp. At each current step, a temperature measurement was obtained via remote viewing by an infrared camera. This paper discusses the experimental methodology, including the calibration of the thermal imaging system, and the results.

Wright, Kenneth H., Jr.↗
NASA NTRS2017

Evaluation of Fast Switching Diode 1N4448 Over a Wide Temperature Range

Electronic parts used in the design of power systems geared for space applications are often exposed to extreme temperatures and thermal cycling. Limited data exist on the performance and reliability of commercial-off-the-shelf (COTS) electronic parts at temperatures beyond the manufacturers specified operating temperature range. This report summarizes preliminary results obtained on the evaluation of automotive-grade, fast switching diodes over a wide temperature range and thermal cycling. The investigations were carried out to establish a baseline on functionality of these diodes and to determine suitability for use outside their recommended temperature limits.

Thermal Cycling↗
NASA NTRS2010

Frequency Stabilization of DFB Laser Diodes at 1572 nm for Spaceborne Lidar Measurements of CO2

We report a fiber-based, pulsed laser seeder system that rapidly switches among 6 wavelengths across atmospheric carbon dioxide (CO2) absorption line near 1572.3 nm for measurements of global CO2 mixing ratios to 1-ppmv precision. One master DFB laser diode has been frequency-locked to the CO2 line center using a frequency modulation technique, suppressing its peak-to-peak frequency drifts to 0.3 MHz at 0.8 sec averaging time over 72 hours. Four online DFB laser diodes have been offset-locked to the master laser using phase locked loops, with virtually the same sub-MHz absolute accuracy. The 6 lasers were externally modulated and then combined to produce the measurement pulse train.

Numata, Kenji↗
NASA NTRS2017

Magnetic Field Sensing with 4H SiC Diodes: N vs P Implantation

We explore the magnetic sensing capabilities of two 4H-SiC n+p diodes fabricated by NASA Glenn which only differ in the implanted ion species, nitrogen and phosphorus, and the implant activation annealing time. We use low- and high-field electrically detected magnetic resonance (EDMR) to investigate the defect structure used to sense magnetic fields as well as to evaluate the sensitivity. In addition, we expose these devices to high energy electron radiation to evaluate the defect sensing capability in a harsh radiation environment. The results from this work will allow us to tailor our processing methods to design a more optimal 4H-SiC pn diode for magnetic field sensing in harsh environments.

Cochrane, Corey J.↗
NASA NTRS2009

A theoretical analysis of steady-state charge collection in simple diodes under high-injection conditions

A previous rigorous mathematical analysis of drift-diffusion equations was used to investigate collected charge in a simple reverse-biased p-n junction diode exposed to an ionization source that liberates carriers (electron-hole pairs) in a quasi-neutral region within the diode. Each of two simple models was found to agree with the more rigorous analysis when carrier liberation is sufficiently intense. One is the sensitive volume (SV) model, and the other was called “ambipolar diffusion with a cutoff” (ADC). The earlier rigorous analysis was worked out in detail only for a localized source, i.e., a point source of carrier liberation, so it was able to validate the applicability of each simple model only for that case. The present paper treats an arbitrary spatial distribution of carrier generation and concludes that the ADC model remains valid for this more general case, but the SV model does

Edmonds, Larry D.↗
DOE OSTI2020

Printed assemblies of ultrathin, microscale inorganic light emitting diodes for deformable and semitransparent displays

Described herein are printable structures and methods for making, assembling and arranging electronic devices. A number of the methods described herein are useful for assembling electronic devices where one or more device components are embedded in a polymer which is patterned during the embedding process with trenches for electrical interconnects between device components. Some methods described herein are useful for assembling electronic devices by printing methods, such as by dry transfer contact printing methods. Also described herein are GaN light emitting diodes and methods for making and arranging GaN light emitting diodes, for example for display or lighting systems.

42 ENGINEERING↗
DOE OSTI2020

System and method for high power diode based additive manufacturing

A system is disclosed for performing an Additive Manufacturing (AM) fabrication process on a powdered material forming a substrate. The system may make use of a diode array for generating an optical signal sufficient to melt a powdered material of the substrate. A mask may be used for preventing a first predetermined portion of the optical signal from reaching the substrate, while allowing a second predetermined portion to reach the substrate. At least one processor may be used for controlling an output of the diode array.

36 MATERIALS SCIENCE↗
DOE OSTI2021

CTE-tuned pyrolytic graphite (PG) substrate to minimize joining stress between laser diode and the substrate

A pyrolytic graphite (PG) substrate and laser diode package includes a substrate body having a PG crystalline structure with a basal plane oriented at a pre-determined orientation angle as measured from a longitudinal axis of a heat generating material, such as a laser diode, mounted on a surface of the PG substrate, so that a coefficient of thermal expansion (CTE) of the PG substrate is substantially matched with a CTE of the material.

Patra, Susant K.↗
DOE OSTI2022

Low temperature process for diode termination of fully depleted high resistivity silicon radiation detectors that can be used for shallow entrance windows and thinned sensors

Fabrication of vertical diodes for radiation sensing using a low temperature microwave anneal is provided. This kind of anneal allows the back side processing to be performed after the front side processing is done without damaging the front side structures. This enables a simplified fabrication of thinned detectors compared to a conventional silicon on insulator process. Another feature that this technology enables is a thin entrance window for a detector that also serves as the doped diode termination. Such thin entrance windows are especially suitable for detection of low energy radiation.

Kenney, Christopher J.↗
DOE OSTI2023

CTE-tuned pyrolytic graphite (PG) substrate to minimize joining stress between laser diode and the substrate

A pyrolytic graphite (PG) substrate and laser diode package includes a substrate body having a PG crystalline structure with a basal plane oriented at a pre-determined orientation angle as measured from a longitudinal axis of a heat generating material, such as a laser diode, mounted on a surface of the PG substrate, so that a coefficient of thermal expansion (CTE) of the PG substrate is substantially matched with a CTE of the material.

Patra, Susant↗
DOE OSTI2024

Thermal diode and thermal switch for bi-directional heat transfer in building envelopes

The present disclosure relates to a directional heat transfer using thermal control devices, including a dual phase change thermal diode and an active contact-based thermal switch. The thermal diode includes a positive temperature coefficient switching material and a negative temperature coefficient switching material arranged in series. The thermal switch includes two thermally conducting surfaces which may be moved to contact (i.e., having a distance between them of substantially zero) creating minimal thermal contact resistance. Both thermal control devices may be used to control heat flow into and/or out of a building.

Kishore, Ravi Anant↗
DOE OSTI2023

Diffused trenches for high fill-factor Low-Gain Avalanche Diodes

Low-Gain Avalanche Diodes (LGADs) are a class of silicon detectors that have been specifically designed for the fast detection of minimum ionizing particles (mips) in High-Energy Physics experiments. While they provide timing resolution on the order of a few tens of picoseconds, they cannot achieve high spatial resolution due to the intrinsic characteristics of their structures. Thus, active R&D is on-going to develop detectors based on LGADs to improve their spatial resolution while maintaining the timing performance of the LGADs. Such devices are, for example, AC-coupled LGADs and Deep-Junction LGADs. Another device option is the Trench-Isolated LGAD (TI LGAD), where trenches etched at the periphery of the pixels isolate them while providing a high fill-factor. Here, in this paper, we present a variation of this latter approach, demonstrating its feasibility by means of 2-dimensional TCAD simulations.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Overcoming Degradation Pathways to Achieve Stable Blue Perovskite Light-Emitting Diodes

Mixed halide (Br/Cl) perovskite nanocrystals (NCs) that represent an advanced blue emitter commonly suffer from spectral instability and poor lifespan; notably, the lack of understanding of the failure mechanisms of these devices has restricted the future progress. Here, we determine that the degradation of CsPbBr x Cl 3– x NCs containing blue light-emitting diodes (LEDs) is due to the combination of two effects. Cl – drift among adjoining NCs under an electric field is found to induce a Cl-deficient material region in multiple NC layers, which dominates the unstable electroluminescence and causes fast degradation in the corresponding devices. In comparison, the monolayer NC devices that feature restricted anion drift pathways exhibit better operational stability; however, excess hole injection is demonstrated to induce irreversible chlorine loss in NCs. Such a process that largely arises from electrochemical oxidation of Cl – initiates a mild device failure in operation of tens of minutes. Through revealing these mechanisms, we modulate the devices’ construction and operational conditions to achieve a longer lifespan.

14 SOLAR ENERGY↗
DOE OSTI2022

An intermediate model for fitting triplet–triplet annihilation in phosphorescent organic light emitting diode materials

Triplet–triplet annihilation (TTA) is one of the primary contributors to efficiency roll-off and permanent material degradation in phosphorescent organic light-emitting diodes. Here, the two limiting case models typically used to quantify this quenching mechanism are multi-step Dexter and single-step Förster, which, respectively, assume ideal Fickian diffusion or perfect trapping of triplet excitons. For device-relevant guest doping levels (typically 5–12 vol. %), both significant diffusion of excitons and trapping due to spatial and energetic disorder exist, so neither conventional model fits experimental data well. We develop and validate an intermediate TTA model, which is a weighted average of the limiting cases of pure radiative decay (no TTA) and multi-step Dexter based TTA that returns an effective TTA rate constant and a parameter quantifying the portion of well-isolated excitons. Kinetic Monte-Carlo simulations and time-resolved photoluminescence measurements of an archetype host–guest system demonstrate that our intermediate model provides significantly improved fits with more realistic physical values, is more robust to variations in experimental conditions, and provides an analysis framework for the effects of trapping on TTA.

30 DIRECT ENERGY CONVERSION↗