Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Technological Features of Irradiation of Sip{sup +}-n-n{sup +} Diodes with Electrons at Elevated Temperatures

The behavior of the lifetime of nonequilibrium charge carriers {tau}{sub p}, the reverse current I{sub R}, and the forward-voltage drop U{sub F} in electron-irradiated (E{sub irr} = 6 MeV) commercial p{sup +}-n-n{sup +} diodes at irradiation temperatures in the range of T{sub irr} = 20-400 Degree-Sign C is studied. Studies have been performed for samples fabricated on a single-crystal Si substrate either doped with phosphorus in the course of growth by the Czochralski method (Cz-n-Si:P) or doped with phosphorus by nuclear transmutations, neutron-transmutation doped Si (NTD n-Si:P). It is shown that, by choosing the temperature conditions of technological irradiation, one can solve the problem of attaining small values of {tau}{sub p} at a minimal increase in U{sub F} and I{sub R} in fast-response diodes. It is established that, in the case of comparable variations in {tau}{sub p} in the base region of diodes, the best relation between U{sub F} and I{sub R} is observed at T{sub irr} = 300 Degree-Sign C in n-Si:P samples doped by the Czochralski method and at T{sub irr} = 350 Degree-Sign C in samples doped by reactions induced by thermal neutrons.

36 MATERIALS SCIENCE↗

Backward-Diode Heterostructure Based on a Zinc-Oxide Nanoarray Formed by Pulsed Electrodeposition and a Cooper-Iodide Film Grown by the SILAR Method

A heterostructure promising for designing a backward diode is formed from a zinc-oxide nanorod array and a nanostructured copper-iodide film. The effect of modes of successive ionic layer adsorption and reaction (SILAR) deposition and the subsequent iodization of CuI films on smooth glass, mica, and fluorine-doped tin oxide (FTO) substrates and on the surface of electrodeposited nanostructured zinc-oxide arrays on the film structure and electrical and optical properties is investigated. A connection between the observed variations in the structure and properties of this material and intrinsic and iodination-induced point defects is established. It is found that the cause and condition for creating a backward-diode heterostructure based on a zinc-oxide nanoarray formed by pulsed electrodeposition and a copper-iodide film grown by the SILAR method is the formation of a p{sup +}-CuI degenerate semiconductor by the excessive iodination of layers of this nanostructured material through its developed surface. The n-ZnO/p{sup +}-CuI barrier heterostructure, which is fabricated for the first time, has the I–V characteristic of a backward diode, the curvature factor of which (γ = 12 V{sup –1}) confirms its high Q factor.

36 MATERIALS SCIENCE↗

Radiation Resistance of Terahertz Diodes Based on GaAs/AlAs Superlattices

The radiation resistance to the gamma-neutron irradiation (~1 MeV) of diodes based on symmetric GaAs/AlAs 30-period superlattices is for the first time studied theoretically and experimentally. The model band diagram and equivalent circuit of the structure under study are used in calculations. Calculations are performed in the quasi-hydrodynamic approximation taking into account the heating of diodes under study by flowing current. The results of calculating the current–voltage characteristics and limiting operating frequencies of the diodes before and after gamma-neutron irradiation correlate well with the experimental data.

36 MATERIALS SCIENCE↗

Studying Magnetic Diodes with a GaMnAs Layer Formed by Pulsed Laser Deposition

A new design for diode heterostructures with (Ga, Mn)As ferromagnetic layers is experimentally investigated. The diode structures are fabricated using a combination of metal-organic chemical vapor deposition (MOCVD) epitaxy and pulsed laser deposition and contain (Ga, Mn)As/n-InGaAs heterojunctions. The electrical properties of the diodes in a magnetic field applied perpendicular to the p–n junction are examined. The negative magnetoresistance observed at temperatures of <50 K (below the (Ga, Mn)As Curie temperature) is attributed to a decrease in the carrier scattering caused by ferromagnetic ordering and in the potential barrier at the (Ga, Mn)As/n-InGaAs interface. The observed negative magnetoresistance depends nonmonotonically on the forward bias with a maximum in the voltage region close to the p–n-junction potential barrier height. The maximum can be caused by the decisive contribution of the spin-dependent resistances of the (Ga, Mn)As layer and (Ga, Mn)As/n-InGaAs interface to the total resistance of the structure. It is found that the dependence of the magnetoresistance on the external magnetic field is hysteretic due to the influence of tensile stresses in the (Ga, Mn)As layer grown on top of a relaxed In{sub x}Ga{sub 1 –x}As buffer layer with an indium content of x ≈ 0.1.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correction of the Reverse Recovery Characteristics of High-Voltage 4H-SiC Junction Diodes Using Proton Irradiation

The effect of proton irradiation on the electrical characteristics of high-voltage (3 kV) 4H-SiC junction diodes is studied. The diodes are irradiated through a 10-μm-thick Ni mask. The proton energy and the irradiation dose are 2.8 MeV and 4 × 10{sup 11} cm{sup –2}, respectively. After irradiation, the forward differential resistance of the diodes increased by ~35%, the reverse-recovery charge decreased by a factor of ~3, and the nature of the reverse recovery became “hard.”.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical Spectroscopy Results for the Self-Magnetic Pinch Electron Beam Diode on the RITS-6 Accelerator

Experiments have been conducted at Sandia National Laboratories' RITS-6 accelerator facility [1] (operating at 7.5 MV and 180 kA) investigating plasma formation and propagation in relativistic electron beam diodes used for flash x-ray radiography. High resolution, visible and ultraviolet spectra were collected in the anode-cathode (A-K) vacuum gap of the Self-Magnetic Pinch (SMP) diode [2-4]. Time and space resolved spectra are compared with time-dependent, collisional-radiative (CR) calculations [5-7] and Lsp, hybrid particle-in-cell code simulations [8,9]. Results indicate the presence of a dense (>1x10 17 cm -3 ), low temperature (few eV), on-axis plasma, composed of hydrocarbon and metal ion species, which expands at a rate of several cm/s from the anode to the cathode. In addition, cathode plasmas are observed which extend several millimeters into the A-K gap [10]. It is believed that the interaction of these electrode plasmas cause premature impedance collapse of the diode and subsequent reduction in the total radiation output. Diagnostics include high speed imaging and spectroscopy using nanosecond gated ICCD cameras, streak cameras, and photodiode arrays.

Johnston, Mark D.↗

Measuring Plasma Formation Field Strength and Current Loss in Pulsed Power Diodes

This LDRD investigated plasma formation, field strength, and current loss in pulsed power diodes. In particular the Self-Magnetic Pinch (SMP) e-beam diode was studied on the RITS-6 accelerator. Magnetic fields of a few Tesla and electric fields of several MV/cm were measured using visible spectroscopy techniques. The magnetic field measurements were then used to determine the current distribution in the diode. This distribution showed that significant beam current extends radially beyond the few millimeter x-ray focal spot diameter. Additionally, shielding of the magnetic field due to dense electrode surface plasmas was observed, quantified, and found to be consistent with the calculated Spitzer resistivity. In addition to the work on RITS, measurements were also made on the Z-machine looking to quantify plasmas within the power flow regions. Measurements were taken in the post-hole convolute and final feed gap regions on Z. Dopants were applied to power flow surfaces and measured spectroscopically. These measurements gave species and density/temperature estimates. Preliminary B-field measurements in the load region were attempted as well. Finally, simulation work using the EMPHASIS, electromagnetic particle in cell code, was conducted using the Z MITL conditions. The purpose of these simulations was to investigate several surface plasma generations models under Z conditions for comparison with experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

EMPIRE-PIC Code Verification of a Cold Diode

This report presents the code verification of EMPIRE-PIC to the analytic solution to a cold diode which was first derived by Jaffe. The cold diode was simulated using EMPIRE-PIC and the error norms were computed based on the Jaffe solution. The diode geometry is one-dimensional and uses the EMPIRE electrostatic field solver. After a transient start-up phase as the electrons first cross the anode-cathode gap, the simulations reach an equilibrium where the electric potential and electric field are approximately steady. The expected spatial order of convergence for potential, electric field and particle velocity are observed.

42 ENGINEERING↗

Incorporation of Alloy Fluctuation Effects for Accurate Modeling of GaN/InGaN/GaN Light Emitting Diodes

III-Nitride light emitting diodes (LEDs) are widely used in a range of high efficiency lighting and display applications, which have enabled significant energy savings in the last decade[1]. To improve the device performance of LEDs, it is imperative to understand the carrier transport, and how it affects forward voltage, extraction efficiency, and other LED characteristics. Despite the wide application of GaN LEDs, transport mechanisms across InGaN/GaN heterostructures in these devices are not well-explained. Fixed polarization sheet charges at InGaN/GaN interfaces lead to large interface dipole charges, which creates large potential barriers to overcome. One-dimensional models for transport across such heterostructures predict turn-on voltages that are significantly higher than that found in real devices. As a result, conventional models for transport cannot be used to design more efficient devices, or to understand the underlying transport and recombination phenomena in InGaN/GaN light emitting diodes. In this work, we show that incorporating low and high Indium compositions within quantum wells at the submicron scale can provide accurate prediction of the characteristics of GaN/InGaN light emitting diodes.

36 MATERIALS SCIENCE↗

High-current, high-voltage AlN Schottky barrier diodes

AlN Schottky barrier diodes with low ideality factor (<1.2), low differential ON-resistance (<0.6 mΩ cm 2 ), high current density (>5 kA cm −2 ), and high breakdown voltage (680 V) are reported. The device structure consisted of a two-layer, quasi-vertical design with a lightly doped AlN drift layer and a highly doped Al 0.75 Ga 0.25 N ohmic contact layer grown on AlN substrates. A combination of simulation, current–voltage measurements, and impedance spectroscopy analysis revealed that the AlN/AlGaN interface introduces a parasitic electron barrier due to the conduction band offset between the two materials. This barrier was found to limit the forward current in fabricated diodes. Further, we show that introducing a compositionally-graded layer between the AlN and the AlGaN reduces the interfacial barrier and increases the forward current density of fabricated diodes by a factor of 10 4 .

Quiñones, C. E. (ORCID:0000000192703747)↗

Analysis of High-Power Diode Laser Heating Effects on HY-80 Steel for Laser Assisted Friction Stir Welding Applications

In this research, several conditions of high power diode laser heated HY-80 steel were characterized to determine the viability of using such lasers as a preheating source before friction stir welding in order to reduce frictional forces thereby reducing tool wear and increasing welding speeds. Differences in microstructures within heat affected zones were identified at specific laser powers and traverse speeds. Vickers hardness values were recorded and analyzed to validate the formation of additional martensite in diode laser heated regions of HY-80 steel. Conditions that produced little to no additional martensite were identified and relationships among high power diode laser power, traverse speed, and martensite formation were determined. The development of heat affected zones, change in grain structure, and creation of additional martensite in HY-80 can be prevented through the optimization of laser amperage and transverse speed.

36 MATERIALS SCIENCE↗

Design of an external-fueled thermionic diode for in-pile testing.

Description of an external-fueled thermionic diode suitable for in-pile testing in a research reactor. The active electrode area is 94 sq cm. The 10-in. long, 1.5-in.-OD emitter body is tungsten 2% thoria. The fuel is contained in six 0.4-in.-diam holes equally spaced about the 0.5-in. central emitter hole. The collector is niobium-1% zirconium. The expected diode performance is 6 W/sq cm at 2000 K. In addition to following the constraints imposed by the in-pile testing and the electrically heated performance mapping prior to insertion in-pile, the diode will have end configurations prototypical of those anticipated for a flow-through, NaK-cooled, external-fuel thermionic reactor.

Ernst, D. M.↗

Design, fabrication and testing of a thermal diode

Heat pipe diode types are discussed. The design, fabrication and test of a flight qualified diode for the Advanced Thermal Control Flight Experiment (ATFE) are described. The review covers the use of non-condensable gas, freezing, liquid trap, and liquid blockage techniques. Test data and parametric performance are presented for the liquid trap and liquid blockage techniques. The liquid blockage technique was selected for the ATFE diode on the basis of small reservoir size, low reverse mode heat transfer, and apparent rapid shut-off.

Swerdling, B.↗

Avalanche diodes for the generation of coherent radiation

Solid state devices and characterization, and optimum imbedding networks for realizing best performance were investigated along with a barrier injection transit time diode. These diodes were investigated for possible application as microwave amplifiers and oscillators. Measurements were made of diode noise figures in the frequency ranges of 4 - 6 GHz. Initial results indicate that a noise figure of 6 - 8 db may be possible. Optimum device structure and fabrication techniques necessary for low noise performance were investigated. Previously published documents on electrodynamics are included.

Penfield, P., Jr.↗

Development and fabrication of improved Schottky power diodes, phases I and II

Reproducible methods for the fabrication of silicon Schottky diodes were developed for the metals tungsten, aluminum, conventional platinum silicide and low temperature platinum silicide. Barrier heights and barrier lowering were measured permitting the accurate prediction of ideal forward and reverse diode performance. Processing procedures were developed which permit the fabrication of large area (approximately 1 sqcm) mesa-geometry power Schottky diodes with forward and reverse characteristics that approach theoretical values.

Cordes, L. F.↗

Development of a blocking orifice thermal diode heat pipe

A new geometry is described for low temperature diode heat pipes employing excess liquid to block the vapor space of the evaporator and part of the transport section during reverse mode conditions. An orifice plate is placed in the pipe at the blocking meniscus location, with the opening arranged to permit proper liquid distribution in both ground tests and zero 'g' operation. Parametric analytical results are presented for several fluids (carbon tetrafluoride, methane, and ethane). Experimental data is presented for a room temperature diode verifying feasibility, and a 1/4 in. O.D. cryogenic diode with methane working fluid.

Kosson, R. L.↗