Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Damping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Enthalpy damping for high Mach number Euler solutions

An improvement on the enthalpy damping procedure currently in use in solving supersonic flow fields is described. A correction based on entropy values is shown to produce a very efficient scheme for simulation of high Mach number three-dimensional flows. Substantial improvements in convergence rates have been achieved by incorporating this enthalpy damping scheme in a finite-volume Runge-Kutta method for solving the Euler equations. Results obtained for blended wing-body geometries at very high Mach numbers are presented.

Moitra, Anutosh↗

Bending rate damping in elastic systems

Preliminary results of an investigation of the bending rate damping model for elastic structures are presented. A model for which the internal damping term is physically plausible and which can accomodate cantilevered boundary conditions is discussed. The model formulation and mathematical foundations are given, and numerical results are discussed.

Banks, H. T.↗

Active damping application to the shuttle RMS

Control Structure Interaction (CSI) is a relatively new technology developed over the last 10 to 15 years for application to large flexible space vehicles. The central issue is recognition that high performance control systems necessary for good spacecraft performance may adversely interact with the dynamics of the spacecraft structures, a problem increasingly aggravated by the large size and reduced stiffness of modern spacecraft structural designs. The CSI analysis and design methods were developed to avoid interactions while maintaining spacecraft performance without exceeding structural capabilities, but they remain largely unvalidated by hardware experiments or demonstrations, particularly in-space flight demonstrations. One recent proposal for a low cost flight validation of CSI technology is to demonstrate active damping augmentation of the Space Shuttle Remote Manipulator System (RMS). An analytical effort to define the potential for such an active damping augmentation demonstration to improve the structural dynamic response of the RMS following payload maneuvers is described. It is hoped that this study will lead to an actual inflight CSI test with the RMS using existing shuttle hardware to the maximum extent possible. By using the existing hardware, the flight demonstration results may eventually be of direct benefit to actual Space Shuttle RMS operations, especially during the construction of the Space Station Freedom.

Gilbert, Michael G.↗

Assessing damping uncertainty in space structures with fuzzy sets

NASA has been interested in the development of methods for evaluating the predictive accuracy of structural dynamic models. This interest stems from the use of mathematical models in evaluating the structural integrity of all spacecraft prior to flight. Space structures are often too large and too weak to be tested fully assembled in a ground test lab. The predictive accuracy of a model depends on the nature and extent of its experimental verification. The further the test conditions depart from in-service conditions, the less accurate the model will be. Structural damping is known to be one source of uncertainty in models. The uncertainty in damping is explored in order to evaluate the accuracy of dynamic models. A simple mass-spring-dashpot system is used to illustrate a comparison among three methods for propagating uncertainty in structural dynamics models: the First Order Method, the Numerical Simulation Method, and the Fuzzy Set Method. The Fuzzy Set Method is shown to bound the range of possible responses and thus to provide a valuable limiting check on the First Order Method near resonant conditions. Fuzzy Methods are a relative inexpensive alternative to numerical simulation.

Ross, Timothy J.↗

Surface tension and viscosity from damped free oscillations of viscous droplets

Damped oscillations of a viscous droplet in vacuum or in an inert gas of negligible density are considered. The dependence of the complex decay factor on the properties of the liquid is investigated for the first time, and numerical results are compared with earlier studies for special cases. A new method is developed to determine both surface tension and viscosity from a single experiment in which the damping rate and frequency of oscillations are measured. The procedure to determine surface tension and viscosity from oscillating levitated liquids is outlined, and results presented for various modes of shape oscillations.

Suryanarayana, P. V. R.↗

Sound transmission loss of integrally damped, curved panels

Results are reported from acoustic transmission-loss measurements on 13 curved Al and composite aircraft-type panels (height 0.81 m, arc length 1.32 m, and curvature radius 2.29 m) without and with integral damping of various types. The fabrication of the panels and the test procedures are described and illustrated with photographs, and the results are presented in graphs. It is found that the loss of a curved panel exceeds the mass-law-predicted loss for a flat panel of the same material and thickness at frequencies below the ring frequency. At higher frequencies, the curved-panel loss is lower than the mass-law loss, being proportional to 20 time the log of thickness. Integral damping is found to be effective both below and above the ring frequency, but different mechanisms are responsible in each case.

Grosveld, Ferdinand W.↗

Discovery of a Ly-alpha galaxy near a damped Ly-alpha absorber at z = 2.3

The detection of a galaxy associated with the damped Ly-alpha absorbing cloud seen at z = 2.309 toward the QSO PHL 957 is reported. In addition to a strong but narrow Ly-alpha emission line and weaker C IV and He II lines, the object shows continuum at V about 24, with a slope rising slightly toward the red. This is similar to what is seen in high-redshift radio galaxies, but this galaxy does not correspond to any known radio source. The detected emission lines and continuum are most easily interpreted as light from hot, recently formed stars, implying a sizable star formation rate and a scarcity of dust. The spatial correlation of the absorbing cloud and the companion galaxy supports the interpretation of damped Ly-alpha clouds as objects fundamentally different from the lower column density Ly-alpha forest clouds, which show weak or no clustering.

Lowenthal, James D.↗

Effect of heat treatment on stiffness and damping of SiC/Ti-15-3

The effect of heat treatment on material properties of SiC/Ti-15-3 was measured by vibration tests. Heat treatment changes the microstructure, which was found to stiffen the matrix and reduce its damping capacity. Test results indicate how these changes in the matrix affect the corresponding properties of the composite. Measurements show that heat treatment affects damping properties of the composite to a greater extent than stiffness properties. The extent of change in mechanical properties is shown to depend on heat treatment temperature and exposure time.

Grady, Joseph E.↗

Damping and vibration considerations for the design of optical systems in a launch/space environment

Engineering philosophies for the design of optical systems launched into space and operating in a vacuum or cryovacuum environment are reviewed. Particular attention is given to sources of energy dissipation which are usually lumped under a single modal parameter denoted as the equivalent viscous damping coefficient. Caging and/or damping system components or application of viscoelastic materials and/or dry friction devices are considered to be alternative methods for stabilizing instruments sensitive to motion.

Richard, Ralph M.↗

The effects of time-dependent excitation on the oscillatory motion of viscously damped laminated composite flat panels

Analytical estimates are used to describe the effects of transverse shear deformation, transverse normal stress, damping, and heterogeneity on the dynamic responses of laminated composite structures. The higher-order plate model is delineated with attention given to applications for viscously damped cross-ply symmetrically laminated plates subject to different time-history excitations. These effects are considered in the context of sonic-boom and blast loadings, and comparisons are made between the results of higher-order plate theory, first-order transverse-shear deformation, and classical theory. The results of the present higher-order model are found to be immune to the changes incurred by adding transverse viscous into the analysis. The responses of pulse-loadings due to symmetrical sonic boom and a triangular blast are found to be similar for certain times and pressure fields. It is shown that only the higher-order plate theory permits the accurate evaluation of frequency spectrum and time-history structural response of composite laminates.

Nosier, A.↗

Theory Of Damping In Composite Laminates

Integrated mathematical model predicts vibration-damping properties of laminated fiber/matrix composite material from micromechanical level to laminate level. Model accounts simultaneously for wider, more realistic variety of laminate configurations and physical phenomena, including asymmetrically oriented plies, anisotropic fiber damping properties, hygral and thermal effects, and coupling among hygral, thermal, and mechanical effects.

Saravanos, D. A.↗

Assigning Damping Parameters To Component Dynamical Modes

Damping parameters found by solving nonlinear optimization problem. Paper discusses assignment of matrices of damping parameters to mathematical models of vibrations and rotations of interconnected flexible components of large, flexible structure. Such models truncated at component level to reduce amount of computation necessary to simulate dynamics of structure numerically at both component and system levels.

Lee, Allan Y.↗

Modified Composite Struts Would Damp Vibrations

Composite-material (fiber/matrix laminate) struts damping longitudinal vibrations fabricated more easily in proposed new design. Prior design described in "Composite Struts Would Damp Vibrations" (NPO-17914). New design similar except pattern of fibers includes rounded bends (instead of sharp bends) in fibers.

Chen, Gun-Shing↗

Attenuation of empennage buffet response through active control of damping using piezoelectric material

Dynamic response and damping data obtained from buffet studies conducted in a low-speed wind tunnel by using a simple, rigid model attached to spring supports are presented. The two parallel leaf spring supports provided a means for the model to respond in a vertical translation mode, thus simulating response in an elastic first bending mode. Wake-induced buffeting flow was created by placing an airfoil upstream of the model of that the wake of the airfoil impinged on the model. Model response was sensed by a strain gage mounted on one of the springs. The output signal from the strain gage was fed back through a control law implemented on a desktop computer. The processed signals were used to 'actuate' a piezoelectric bending actuator bonded to the other spring in such a way as to add damping as the model responded. The results of this 'proof-of-concept' study show that the piezoelectric actuator was effective in attenuating the wake-induced buffet response over the range of parameters investigated.

Heeg, Jennifer↗

Analysis and optimal design of thick composite structures with passive damping considerations

A design methodology to tailor thick composite plates for optimal static and damping performance is presented. The method is based on discrete layer composite mechanics, hence, is suitable for thick composite laminates. The design criteria include static deflections, frequency and damping constraints. Evaluations on cross-ply simply-supported plates illustrate the advantages of the methodology. Comparisons with design methods based on the classical laminate theory show significant deviations in the resultant optimal designs at higher thicknesses.

Saravanos, D. A.↗

A spectroscopic study of damped Lyman-alpha systems in the Las Campanas/Palomar survey

The present intermediate-resolution spectra of nine QSOs contain 15 candidate damped Ly-alpha absorption features which are part of a sample of candidate damped Ly-alpha absorption lines. Ten of the 15 candidates are confirmed to have these features; eight of the ten have neutral hydrogen column density greater than 2 x 10 exp 20/sq cm. A simple curve-of-growth analysis is conducted for seven of the ten confirmed Ly-alpha systems, in order to characterize the kinematics of the absorbing gas; the deduced velocity dispersion, which is too large to be compatible with the simple velocity structure indicated by the 21-cm absorption data, is interpreted as grounds for a two-phase model encompassing a quiescent H I gas and a turbulent gas that dominates the equivalent widths of associated metal lines.

Lu, Limin↗

Calculation of stiffness and damping coefficients for elastically supported gas foil bearings

The stiffness and damping coefficients of an elastically supported gas foil bearing are calculated. A perfect gas is used as the lubricant, and its behavior is described by the Reynolds equation. The structural model consists only of an elastic foundation. The fluid equations and the structural equations are coupled. A perturbation method is used to obtain the linearized dynamic coefficient equations. A finite difference formulation has been developed to solve for the four stiffness and the four damping coefficients. The effect of the bearing compliance on the dynamic coefficients is discussed in this paper.

Peng, J.-P.↗

Effect of length of Handley Page tip slots on the lateral-stability factor, damping in roll

Tests have been made in the NACA 7 by 10 foot wind tunnel on a Clark Y wing model equipped with various lengths of Handley Page slots extending inward from the wing tips. The slot lengths tested ranged from 20 to 100 per cent of the semi span. The effect of slot lengths on damping in roll was determined by means of both free-autorotation and forced-rotation test. In addition, the maximum lift coefficient was found with each slot length. The optimum length of slot for satisfactory damping in roll over a large range of angles of attack was found to be slightly over 50 per cent of the semispan for the form of slot tested.

Weick, Fred E↗