Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DENSITY OF STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Nanoscale Superconducting States in the Fe-Based Filamentary Superconductor of Pr-Doped CaFe 2 As 2

The low-temperature scanning tunneling microscope and spectroscopy (STM/STS) are used to visualize superconducting states in the cleaved single crystal of 9% praseodymium-doped CaFe 2 As 2 (Pr-Ca122) with Tc ≈ 30 K. The spectroscopy shows strong spatial variations in the density of states (DOS), and the superconducting map constructed from spectroscopy discloses a localized superconducting phase, as small as a single unit cell. The comparison of the spectra taken at 4.2 K and 22 K (below vs. close to the bulk superconducting transition temperature) from the exact same area confirms the superconducting behavior. Nanoscale superconducting states have been found near Pr dopants, which can be identified using dI/dV conductance maps at +300 mV. There is no correlation of the local superconductivity to the surface reconstruction domain and surface defects, which reflects its intrinsic bulk behavior. We, therefore, suggest that the local strain of Pr dopants is competing with defects induced local magnetic moments; this competition is responsible for the local superconducting states observed in this Fe-based filamentary superconductor.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Differentiating the bonding states in calcium carbonate polymorphs by low-loss electron-energy-loss spectroscopy

Calcium carbonate is one of the important building components in organisms, especially the two most common polymorphs, calcite and aragonite. Here, to understand the difference in bonding state, the two polymorphs are characterized by valence (low-loss) electron energy loss spectroscopy. It is found that the difference in Ca M 23 edge originating from 3p to 3d states is consistent with the change of Ca-O bonds in the two studied polymorphs. Surprisingly, the measured Ca M 23 edge is in qualitative agreement with the calculated partial density of states (PDOS) of Ca-d states in contrast to their L edges (from 2p to 3d states) which are strongly influenced by atomic multiplet effect (spin-orbit coupling). This is because the atomic multiplet effect is much reduced for the Ca 3p orbital, which permits the corresponding Ca M 23 edge to be compared with the PDOS results. Our findings show insights that PDOS can potentially be used to interpret the M 23 edge of lighter 3d transition metals such as scandium, titanium, vanadium and chromium when such interpretation may not be achieved for their L edges.

36 MATERIALS SCIENCE↗

Radiation pressure-driven shocks in winds from hot stars

The dynamical theory of radiation-pressure-driven shocks in winds from early-type stars is outlined. After the principal parameters needed for a description of these shocks are isolated (speeds relative to incoming material and their column densities), the shocks' principal properties as functions of these parameters are estimated. The special case of time-steady shocks is examined, and calculations are given for density, ionization state, temperature, and flow velocity as functions of position; also calculated are X-ray emissivity, UV line emissivity, and total radiation force as functions of shock velocity and postshock column density.

Krolik, J. H.↗

Magnetism and superconductivity of some Tl-Cu oxides

Many copper oxide based Thallium compounds have now been discovered. In comparison to the Bi-compounds, the Tl-system shows a richer diversity; viz., High Temperature Superconductors (HTSC) can be obtained with either one or two Tl-0 layers (m = 1,2); also, the triple-digit phases are easier to synthesize. The value of d, oxygen stoichiometry, is critical to achieving superconductivity. The Tl system is robust to oxygen loss; Tl may be lost or incorporated by diffusion. A diffusion coefficient equal to 10 ms at 900 C was determined. Both ortho-rhombic and tetragonal structures are evidenced, but HTSC behavior is indifferent to the crystal symmetry. This system has the highest T(sub c) confirmed. T(sub c) generally increases with p, the number of CuO layers, but tends to saturate at p = 3. Zero resistance as high as 125K has been observed. Most of these HTSC's are hole type, but the Ce-doped specimens may be electronic. The magnetic aspects were studied; because in addition to defining the perfectly diamagnetic ground state as in the conventional superconductors, magnetism of the copper oxides show a surprising variety. This is true of both the normal and the superconducting states. Also, due to the large phonon contribution to the specific heat at the high T(sub c) accurate thermal measurement of important parameters such as the sp. heat jump, electronic density of states, D(Ef) and coherence length are uncertain, and thus, are estimated from the magnetic results. Results from the Tl-system CuO, LaBaCuO, 120 and the Bi-CuO compounds are discussed. The emphasis is on the role of magnetism in the TlCuO HTSC, but technological aspects are also pointed out.

Datta, Timir↗

Hybrid-PIC Modeling of the Transport of Atomic Boron in a Hall Thruster

Computational analysis of the transport of boron eroded from the walls of a Hall thruster is performed by implementing sputter yields of hexagonal boron nitride and velocity distribution functions of boron within the hybrid-PIC model HPHall. The model is applied to simulate NASA's HiVHAc Hall thruster at a discharge voltage of 500V and discharge powers of 1-3 kW. The number densities of ground- and 4P-state boron are computed. The density of ground-state boron is shown to be a factor of about 30 less than the plasma density. The density of the excited state is shown to be about three orders of magnitude less than that of the ground state, indicating that electron impact excitation does not significantly affect the density of ground-state boron in the discharge channel or near-field plume of a Hall thruster. Comparing the rates of excitation and ionization suggests that ionization has a greater influence on the density of ground-state boron, but is still negligible. The ground-state boron density is then integrated and compared to cavity ring-down spectroscopy (CRDS) measurements for each operating point. The simulation results show good agreement with the measurements for all operating points and provide evidence in support of CRDS as a tool for measuring Hall thruster erosion in situ.

Materials Engineering↗

An efficient quantum circuit for block encoding a pairing Hamiltonian

We present an efficient quantum circuit for block encoding a pairing Hamiltonian often studied in nuclear physics. Our block encoding scheme does not require mapping the creation and annihilation operators to the Pauli operators and representing the Hamiltonian as a linear combination of unitaries. Instead, we show how to encode the Hamiltonian directly using controlled swap operations. We analyze the gate complexity of the block encoding circuit and show that it scales polynomially with respect to the number of qubits required to represent a quantum state associated with the pairing Hamiltonian. We also show how the block encoding circuit can be combined with the quantum singular value transformation to construct an efficient quantum circuit for approximating the density of states of a pairing Hamiltonian. The techniques presented can be extended to encode more general second-quantized Hamiltonians.

97 MATHEMATICS AND COMPUTING↗

Exploration of two surfaces observed in Weyl semimetal BaMnSb 2

Single crystalline BaMnSb 2 is considered as a 3D Weyl semimetal with the 2D electronic structure containing Dirac cones from the Sb sheet. We report experimental investigation of low-temperature cleaved BaMnSb 2 surfaces using scanning tunneling microscopy/spectroscopy and low energy electron diffraction. By natural cleavage, we find two terminations: one is Ba (above the orthorhombically distorted Sb sheet) and another Sb2 (at the surface of the Sb/Mn/Sb sandwich layer). Both terminations show the 2×1 surface reconstructions, with drastically different morphologies and electronic properties, however. The reconstructed structures, defect types and nature of the electronic structures of the two terminations are extensively studied. The quasiparticle interference (QPI) analysis is conducted at the energy range between -2 V and 2 V, although no interesting states are observed near the Fermi level, the surface-projected electronic band structures strongly depend on the surface termination above 1.6 V. The existence of defects can greatly modify the local density of states to create electronic phase separations on the surface in the order of tens of nm scale. Our observation on the atomic structures of the terminations and the corresponding electronic structures provides critical information towards an understanding of topological properties of BaMnSb 2 .

36 MATERIALS SCIENCE↗

Measured and Simulated Dark J-V Characteristics of a-Si:H Single Junction p-i-n Solar Cells Irradiated with 40 keV Electrons

The effect of 40 keV electron irradiation on a-Si:H p-i-n single-junction solar cells was investigated using measured and simulated dark J-V characteristics. EPRI-AMPS and PC-1D simulators were explored for use in the studies. The EPRI-AMPS simulator was employed and simulator parameters selected to produce agreement with measured J-V characteristics. Three current mechanisms were evident in the measured dark J-V characteristics after electron irradiation, namely, injection, shunting and a term of the form CV(sup m). Using a single discrete defect state level at the center of the band gap, good agreement was achieved between measured and simulated J-V characteristics in the forward-bias voltage region where the dark current density was dominated by injection. The current mechanism of the form CV(sup m) was removed by annealing for two hours at 140 C. Subsequent irradiation restored the CV(sup m) current mechanism and it was removed by a second anneal. Some evidence of the CV(sup m) term is present in device simulations with a higher level of discrete density of states located at the center of the bandgap.

Lord, Kenneth↗

Ultrafast Dynamics of Excitonic Complexes in Electrolyte-Gated Monolayer MoS 2

Understanding and controlling ultrafast excitons and trion dynamics in monolayer transition metal dichalcogenides (TMDs) is critical for optoelectronic and photonic applications. These dynamics depend strongly on carrier density, but most studies use fluence-dependence to modulate electron-hole populations rather than direct electrostatic gating that is more relevant to optoelectronic devices. We utilize electrolyte gating to tune the ground-state carrier density of monolayer MoS 2 and probe excitonic dynamics using transient absorption spectroscopy, thereby modifying absorption through bandgap renormalization, screening, phase-space filling, and exciton-trion crossover. Spectral deconvolution reveals distinct but coupled exciton and trion dynamics. Excitons form independently of voltage but relax faster with increasing carrier density, consistent with Auger-like processes, while trions decay more rapidly through multiple channels. At higher voltages, trion relaxation shifts from a sub-picosecond cooling to slower trapping-assisted processes. Furthermore, our results provide missing insights into the interplay between excitons and trions in monolayer MoS 2 , relevant for TMD-based optoelectronics.

chalcogenides↗

Rao-Blackwellization for Adaptive Gaussian Sum Nonlinear Model Propagation

When dealing with imperfect data and general models of dynamic systems, the best estimate is always sought in the presence of uncertainty or unknown parameters. In many cases, as the first attempt, the Extended Kalman filter (EKF) provides sufficient solutions to handling issues arising from nonlinear and non-Gaussian estimation problems. But these issues may lead unacceptable performance and even divergence. In order to accurately capture the nonlinearities of most real-world dynamic systems, advanced filtering methods have been created to reduce filter divergence while enhancing performance. Approaches, such as Gaussian sum filtering, grid based Bayesian methods and particle filters are well-known examples of advanced methods used to represent and recursively reproduce an approximation to the state probability density function (pdf). Some of these filtering methods were conceptually developed years before their widespread uses were realized. Advanced nonlinear filtering methods currently benefit from the computing advancements in computational speeds, memory, and parallel processing. Grid based methods, multiple-model approaches and Gaussian sum filtering are numerical solutions that take advantage of different state coordinates or multiple-model methods that reduced the amount of approximations used. Choosing an efficient grid is very difficult for multi-dimensional state spaces, and oftentimes expensive computations must be done at each point. For the original Gaussian sum filter, a weighted sum of Gaussian density functions approximates the pdf but suffers at the update step for the individual component weight selections. In order to improve upon the original Gaussian sum filter, Ref. [2] introduces a weight update approach at the filter propagation stage instead of the measurement update stage. This weight update is performed by minimizing the integral square difference between the true forecast pdf and its Gaussian sum approximation. By adaptively updating each component weight during the nonlinear propagation stage an approximation of the true pdf can be successfully reconstructed. Particle filtering (PF) methods have gained popularity recently for solving nonlinear estimation problems due to their straightforward approach and the processing capabilities mentioned above. The basic concept behind PF is to represent any pdf as a set of random samples. As the number of samples increases, they will theoretically converge to the exact, equivalent representation of the desired pdf. When the estimated qth moment is needed, the samples are used for its construction allowing further analysis of the pdf characteristics. However, filter performance deteriorates as the dimension of the state vector increases. To overcome this problem Ref. [5] applies a marginalization technique for PF methods, decreasing complexity of the system to one linear and another nonlinear state estimation problem. The marginalization theory was originally developed by Rao and Blackwell independently. According to Ref. [6] it improves any given estimator under every convex loss function. The improvement comes from calculating a conditional expected value, often involving integrating out a supportive statistic. In other words, Rao-Blackwellization allows for smaller but separate computations to be carried out while reaching the main objective of the estimator. In the case of improving an estimator's variance, any supporting statistic can be removed and its variance determined. Next, any other information that dependents on the supporting statistic is found along with its respective variance. A new approach is developed here by utilizing the strengths of the adaptive Gaussian sum propagation in Ref. [2] and a marginalization approach used for PF methods found in Ref. [7]. In the following sections a modified filtering approach is presented based on a special state-space model within nonlinear systems to reduce the dimensionality of the optimization problem in Ref. [2]. First, the adaptive Gaussian sum propagation is explained and then the new marginalized adaptive Gaussian sum propagation is derived. Finally, an example simulation is presented.

state estimation↗

Many-Body Effects in FeN4 Center Embedded in Graphene

We introduce a computational approach to study porphyrin-like transition metal complexes, bridging density functional theory and exact many-body techniques, such as the density matrix renormalization group (DMRG). We first derive a multi-orbital Anderson impurity Hamiltonian starting from first principles considerations that qualitatively reproduce generalized gradient approximation (GGA)+U results when ignoring inter-orbital Coulomb repulsion U ′ and Hund exchange J. An exact canonical transformation is used to reduce the dimensionality of the problem and make it amenable to DMRG calculations, including all many-body terms (both intra- and inter-orbital), which are treated in a numerically exact way. We apply this technique to FeN 4 centers in graphene and show that the inclusion of these terms has dramatic effects: as the iron orbitals become single occupied due to the Coulomb repulsion, the inter-orbital interaction further reduces the occupation, yielding a non-monotonic behavior of the magnetic moment as a function of the interactions, with maximum polarization only in a small window at intermediate values of the parameters. Furthermore, U ′ changes the relative position of the peaks in the density of states, particularly on the iron d z 2 orbital, which is expected to affect the binding of ligands greatly.

36 MATERIALS SCIENCE↗

Design Rules of the Mixing Phase and Impacts on Device Performance in High-Efficiency Organic Photovoltaics

In nonfullerene acceptor- (NFA-) based solar cells, the exciton splitting takes place at both domain interface and donor/acceptor mixture, which brings in the state of mixing phase into focus. The energetics and morphology are key parameters dictating the charge generation, diffusion, and recombination. It is revealed that tailoringthe electronic properties of the mixing region by doping with larger-bandgap components could reduce the density of state but elevate the filling state level, leading to improved open-circuit voltage ( V OC ) and reduced recombination. The monomolecular and bimolecular recombinations are shown to be intercorrelated, which show a Gaussian-like relationship with V OC and linear relationship with short-circuit current density ( J SC ) and fill factor (FF). The kinetics of hole transfer and exciton diffusion scale with J SC similarly, indicating the carrier generation in mixing region and crystalline domain are equally important. From the morphology perspective, the crystalline order could contribute to V OC improvement, and the fibrillar structure strongly affects the FF. These observations highlight the importance of the mixing region and its connection with crystalline domains and point out the design rules to optimize the mixing phase structure, which is an effective approach to further improve device performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exact solution of the topological symplectic Kondo problem

The Kondo effect is an archetypical phenomenon in the physics of strongly correlated electron systems. Recent attention has focused on the application of Kondo physics to quantum information science by exploiting overscreened Kondo impurities with residual anyon-like impurity entropy. While this physics was proposed in the fine-tuned multi-channel Kondo setup or in the Majorana-based topological Kondo effect, we here study the Kondo effect with symplectic symmetry Sp(2k) and present details about the implementation which importantly only involves conventional s-wave superconductivity coupled to an array of resonant levels and neither requires perfect channel symmetry nor Majorana fermions. Here we carefully discuss the role of perturbations and show that a global Zeeman drives the system to a 2-channel SU(k) fixed point. Exact results for the residual entropy, specific heat and magnetization are derived using the thermodynamic Bethe Ansatz for Sp(2k). This solution not only proves the existence of a quantum critical ground state with anyon-like Hilbert space dimension, but also a particularly weak non-Fermi liquid behavior at criticality. We interpret the weakness of non-analyticities as a manifestation of suppressed density of states at the impurity causing only a very weak connection of putative anyons and conduction electrons. Given this weak connection, the simplicity of the design and the stability of the effect, we conjecture that the symplectic Kondo effect may be particularly suitable for quantum information applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New heterojunction LWIR detector options

Researchers investigate the heterojunction internal photoemission (HIP) approach that potentially offers long wavelength infrared (LWIR) photovoltaic detector performance (single pixel) that is competitive with the best of other approaches being considered. Most significantly, this approach offers a relatively simple device technology that promises producible and uniform FPA's. Researchers emphasize an exciting process based on intervalence band absorption. They investigate both III-V and Si-based heterojunctions grown by molecular beam epitaxy (MBE) in which the barrier can be tailored to the desired cutoff wavelength. In addition, MBE allows one to optimize the device structure with precise control of doping profiles and layer thicknesses, and perform band structure engineering by control of composition and heterojunction strain. Researchers also consider free carrier absorption in heterojunctions. Acceptable absorption coefficients can be achieved in very heavily n(exp +) doped semiconductor layers (approx. equals 10(exp 20)cm(exp -3). However, in this case the appreciable filling of conduction band states leads to a Schottky-like photoresponse with a gradual (quadratic) turn-on above threshold. A more satisfactory approach would be to use p(exp +) doping so that with the higher density of states in the heavy hole valence band there would be a narrow band of occupied states. This gives the desirable effect of a more rapid (linear) turn-on above threshold. Unfortunately, the higher hole effective mass also reduces (inversely) the free carrier absorption. For this and other reasons, the intervalence band absorption process looks much more promising.

Maserjian, Joseph↗

Charge density wave in a band insulator

Charge-density-wave implies a periodic modulation of the charge density. Typically observed in metallic systems, charge-density-wave arise from Fermi surface instabilities, resulting in the total or partial gapping of the Fermi surface. Here, we present experimental evidence for a charge-density wave state emerging in a band insulator which has no Fermi surface. The bulk and surface of our material platform, 𝛂-Bi 4 Br 4 , is gapped over the entire Brillouin zone. Through topographic and spectroscopic imaging at low temperatures, we unveil an unexpected unidirectional charge modulation in 𝛂-Bi 4 Br 4 , breaking the lattice translation symmetry. The charge-density-wave develops at temperatures below 40 K and adds an energy gap atop the existing insulating gap of 𝛂-Bi 4 Br 4 . Furthermore, our transport measurements reveal nonlinear electrical conduction, a phenomenon conventionally associated with the sliding or phason mode of incommensurate charge-density-waves. These unusual observations represent a different type of charge-density-wave

Phase transitions and critical phenomena↗

Origin of the magnetic and orbital ordering in α-Sr 2 CrO 4

Motivated by recent experimental progress in transition metal oxides with the K 2 NiF 4 structure, in this study we investigate the magnetic and orbital ordering in α-Sr 2 CrO 4 . Using first principles calculations, first we derive a three-orbital Hubbard model, which reproduces the ab initio band structure near the Fermi level. The unique reverse splitting of t 2g orbitals in α-Sr 2 CrO 4 , with the 3d 2 electronic configuration for the Cr 4+ oxidation state, opens up the possibility of orbital ordering in this material. Using real-space Hartree-Fock for multi-orbital systems, we constructed the ground state phase diagram for the two dimensional compound α-Sr 2 CrO 4 . We found stable ferromagnetic, antiferromagnetic, antiferro-orbital, and staggered orbital stripe ordering in robust regions of the phase diagram. Furthermore, using the density matrix renormalization group method for two-leg ladders with the realistic hopping parameters of α-Sr 2 CrO 4 , we explore magnetic and orbital ordering for experimentally relevant interaction parameters. Again, we find a clear signature of antiferromagnetic spin ordering along with antiferro-orbital ordering at moderate to large Hubbard interaction strength. We also explore the orbital-resolved density of states with Lanczos, predicting insulating behavior for the compound α-Sr 2 CrO 4 , in agreement with experiments. Finally, an intuitive understanding of the results is provided based on a hierarchy between orbitals, with d xy driving the spin order, while electronic repulsion and the effective one dimensionality of the movement within the d xz and d yz orbitals driving the orbital order.

36 MATERIALS SCIENCE↗

Ferromagnetic Interlayer Exchange Coupling in a Few Layers of CrSBr on a Gold Thin Film

Abstract The two-dimensional character of van der Waals magnets allows for efficient control of their properties via proximity effects and electrical stimuli, making them promising candidates for application in spin electronics. We use spin-polarized low-energy electron microscopy to directly image the magnetic texture of thin CrSBr on top of a Au film, discovering a ferromagnetic ground state. We argue that the stabilization of the ferromagnetic ordering─as compared to the conventional antiferromagnetic one─is obtained via electron transfer from the Au film to the CrSBr flakes, in agreement with ab initio density functional theory calculations. Reflected-electron spectroscopy shows clear differences in the unoccupied density of states between a few layers of CrSBr on Au and bulk CrSBr, pointing toward electronic band structure modification in thin CrSBr. This work sheds light on the possibility of tuning the magnetic properties of two-dimensional magnets via substrate engineering.

Bosma, Rixt [University of Groningen , , ,]↗

Effect of superconductivity on the shape of flat bands

Abstract For the first time, basing both on experimental facts and our theoretical consideration, we show that Fermi systems with flat bands should be tuned with the superconducting state. Experimental measurements on magic-angle twisted bilayer graphene of the Fermi velocity V F as a function of the temperature T c of superconduction phase transition have revealed , where N s (0) is the density of states at the Fermi level. We show that the high- T c compounds exhibit the same behavior. Such observation is a challenge to theories of high- T c superconductivity, since V F is negatively correlated with T c , for . We show that the theoretical idea of forming flat bands in strongly correlated Fermi systems can explain this behavior and other experimental data collected on both and twisted bilayer graphene. Our findings place stringent constraints on theories describing the nature of high- T c superconductivity and the deformation of flat band by the superconducting phase transition.

Physics↗