Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Complex Geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

A Poisson equation method for prescribing fully developed non-Newtonian inlet conditions for computational fluid dynamics simulations in models of arbitrary cross-section

Prescribing inlet boundary conditions for computational fluid dynamics (CFD) simulations of internal flow in complex geometries such as anatomical vascular models is challenging. In the absence of patient-specific inlet velocity data, a common approach for long blood vessels is to assume that the inlet flow is fully developed. In vessels of irregular cross section, however, prescribing fully developed conditions is complicated due to the lack of a general closed-form analytical solution. In this study, we develop a simple Poisson equation method for prescribing fully developed inlet conditions for the flow of either Newtonian or non-Newtonian fluids in CFD models of arbitrary cross-section. We first derive the generalized Poisson equation for fully developed flow of a non-Newtonian fluid and we then develop and verify a methodology for numerically computing the solution on any planar boundary domain. In addition, we develop a simple extension of the method for prescribing a non-orthogonal inlet velocity that represents fully developed flow from an upstream tube that is connected to the CFD inlet at a non-orthogonal angle. This may be used to investigate a common source of uncertainty in CFD simulations of internal flow that is due to a lack of information concerning the exact streamwise flow direction at the inlets. Comparison to several Newtonian and non-Newtonian benchmark verification solutions shows the method to be extremely accurate. As a practical demonstration case, we use the method to prescribe fully developed conditions on multiple non-circular inlets for the non-Newtonian flow of blood in a patient-specific model of the inferior vena cava (IVC). Finally, we further demonstrate the utility of the method by performing a sensitivity study using the patient-specific IVC model, wherein we investigate the influence of inlet velocity flow direction on the non-Newtonian IVC hemodynamics. Given its simplicity and computational efficiency, the method is shown to be far superior to alternative approaches for prescribing fully developed inlet conditions in such complicated geometries. In conclusion, to facilitate the adoption of our Poisson equation method, we have distributed our OpenFOAM source code and the associated test cases from this study as open-source software.

97 MATHEMATICS AND COMPUTING↗

Complex shaped boron carbides from negative additive manufacturing

In this paper, complex shaped boron carbide with carbon (B 4 C/C) at near-full densities were achieved for the first time using negative additive manufacturing techniques via gelcasting. Negative additive manufacturing involves 3D printing of sacrificial molds used for casting negative copies. B 4 C powder distributions and rheology of suspensions were optimized to successfully cast complex shapes. In addition to demonstrating scalability of these complex geometries, hierarchically meso-porous structures were also shown to be possible from this technique. Resorcinol-Formaldehyde (RF) polymer was selected as the gelling agent and can also pyrolyze into a carbon aerogel network to act as the sintering aid for B 4 C. Finally, due to the highly effective distribution of in situ carbon for the B 4 C matrix, near-full sintered density of 97–98% of theoretical maximum density was achieved.

36 MATERIALS SCIENCE↗

Texture development in magnetostrictive Fe-Ga alloys processed by laser powder bed fusion

Iron-gallium (Fe-Ga, Galfenol) alloys are promising magnetostrictive materials for actuators, sensors, and energy harvesting, but their performance is highly sensitive to microstructure and texture. Additive manufacturing by laser powder bed fusion (LPBF) offers a pathway to engineer texture and integrate functional materials into complex geometries. Here, we fabricate Fe-Ga alloys (Fe 82.2 Ga 17.8 ) by LPBF of gas-atomized powders and systematically optimize laser power and scan speed to maximize density and control texture. Nearly full-density parts (up to 99.6 %) are achieved within a narrow processing window. Electron backscatter diffraction (EBSD) reveals a strong <100> fiber texture aligned with the build direction and columnar grains up to 1 mm long. Magnetostriction measurements show saturation magnetostriction of 190 ppm in the build direction. Correlating texture data with macroscopic magnetostriction, we estimate intrinsic magnetostriction constants (λ 100 = 228 ppm, λ 111 = 12 ppm), closely matching single crystal-derived values. These results demonstrate the critical interplay between processing, texture, and functional performance in additively manufactured Fe-Ga alloys and establish LPBF as a viable route for high-performance magnetostrictive materials.

Additive manufacturing↗

Fractal nature structure reconstruction method in designing microstructure properties

Highlights: • Structure and material’s properties, within the material’s consolidation triad: Synthesis – Structure – Properties. • The grain prediction methods is based on the measurements of the solid Euclidean geometric fractal characteristics. • The intergranular contacts inside the BaTiO3 -ceramic are responsible for intergranular capacities. • The inner complex geometry of intergrain contacts imposes fractal correction factor for permeability. - Abstract: In the process of predicting materials properties, it is necessary to predict microstructures. This is important for ceramic materials, for the purpose of miniaturization and for a higher level of integration. Although the method of material structure reconstruction is for the first time used on BaTiO{sub 3}-ceramics by these authors, it can also be used for silicate, refractory and other ceramics, and, for any powder-based material. The reconstruction is based on the grain perimeter fractal analysis and the Richardson method. The main contribution of this paper is establishing the relationship between the electronic properties of BaTiO{sub 3}-ceramics and its microstructural fractal nature. Similar relations can be used for any ceramics or even any materials. The samples consolidation includes both powder pressing (cold sintering phase) and sintering in a furnace (hot sintering phase). The fractal nature characterization has a very important role from the powder phase up to the final microstructure, through which structures it directly impacts electro-physical and other ceramics properties. Thereby, the new possibilities in the microstructure characterization applications are directly introduced to an engineering system, providing the new solutions related to computer aided support. This creates new industrial production and application possibilities, especially in the process of ceramics material consolidation, now based on microstructural properties, which is providing a basis for “fractal electronics’’ development.

36 MATERIALS SCIENCE↗

Volumetric energy density impact on mechanical properties of additively manufactured 718 Ni alloy

The 718 Ni-based superalloy has gained enormous attention in the additive manufacturing community for its great weldability, allowing for complex geometries to be formed, and its superb mechanical strength. Here we explore the influence of a wide range of major build parameters on microstructures and mechanical properties of 718 Ni alloys. Volumetric energy density appears to be one of the major parameters that captures the relationship between energy input and measured mechanical properties and microstructures of the alloys. A threshold energy density was identified below which the properties of the additively manufactured specimen degrade substantially. Finally, the influence of energy density on the quality of the built specimen simulated using Flow3D AM correlates well with the experimental results.

36 MATERIALS SCIENCE↗

A lightweight Fe–Mn–Al–C austenitic steel with ultra-high strength and ductility fabricated via laser powder bed fusion

Lightweight Fe–Mn–Al–C steels have become a topic of significant interest for the defense and automotive industries. These alloys can maintain high strength and ductility while also reducing weight in structural applications. Conventionally processed Fe–Mn–Al–C austenitic steels with high Al content (~9 wt%) demonstrate greater than 1.5 GPa strength with 35% elongation. Several recent studies have demonstrated success in fabricating steel parts using laser powder bed fusion (L-PBF) additive manufacturing (AM), which can generate near-net-shape components with complex geometries and is capable of local microstructural control. However, studies on L-PBF processing of Fe–Mn–Al–C alloys have focused on low Al content (<5 wt%) compositional regimes representing alloys that undergo transformation-induced plasticity (TRIP) and twinning-induced plasticity (TWIP). Here, in this study, we present the effects of L-PBF processing on the microstructure and mechanical properties of an Fe–30Mn–9Al–1Si-0.5Mo-0.9C austenitic steel. A process optimization framework is employed to determine an ideal L-PBF processing space that will result in >99% density parts. Implementing this framework resulted in near-fully dense specimens fabricated over a broad range of process parameters. Additionally, two bi-directional scan rotation strategies (90° and 67°) were applied to understand their effects on texture and anisotropy in this material. As-printed specimens displayed considerable work-hardening characteristics with average strengths of up to 1.3 GPa and 36% elongation in the build direction. However, solidification microcracks oriented in the build direction resulted in anisotropy in tensile strength and ductility resulting in average strengths of 1.1 GPa and 20% elongation perpendicular to the build direction. The successful L-PBF fabrication of Fe–30Mn–9Al–1Si-0.5Mo-0.9C presented here is expected to open new avenues for weight reduction in structural applications with a high degree of control over part topology.

36 MATERIALS SCIENCE↗

Influence of microstructure and temperature on impact toughness of H13 steel produced by binder jet additive manufacturing

Binder Jet Additive Manufacturing (BJAM) is a promising manufacturing pathway to produce H13 steel dies and tooling with complex geometries for applications in high pressure aluminum die casting, hot stamping, and injection molding. While fully dense H13 coupons produced using BJAM have been subjected to detailed microstructure characterization, properties which are critical and relevant to the aforementioned applications, such as impact toughness, have not been reported. Here, this work evaluated the influence of microstructural characteristics and test temperature on the impact toughness of H13 produced by BJAM. Coupons were produced from three different powder size distributions (PSDs), with nominal powder size ranges of −22 μm, 10-32 μm, and 15-53 μm. Coupons were printed, sintered, hot isostatically pressed (HIPed), and heat treated by quenching and tempering. After HIPing, the measured porosities of the different PSDs were all less than 0.015 vol%. The −22 μm PSD BJAM material exhibited the best impact toughness of all three PSDs across the entire test temperature range from 25 to 400 °C, and also exhibited an ambient temperature impact toughness of 10.9 J at a hardness of 46 HRC, equivalent to minimum threshold requirements for premium grade H13. However, all three BJAM PSDs exhibited moderately lower impact toughness than premium grade wrought H13 from RT to 400 °C. We attribute this in part due to the very large prior-austenite grain (PAG) sizes near 400 μm and segregation from former liquid channels leading to greater amounts of carbide precipitation on PAG boundaries. Technical pathways for optimizing processing and chemistry of BJAM H13 to further improve impact toughness are discussed.

Binder jet additive manufacturing↗

Predicting Geometric Influences in Metal Additive Manufacturing

Metal additive manufacturing (AM) has evolved from scientific curiosity to a potential paradigm shift in materials manufacturing owing to its ability to control microstructure and fabricate complex geometries. However, geometry, often ignored as a variable, can have a significant impact on microstructure evolution, thereby indirectly limiting the design flexibility offered by AM. Currently, the process of retaining microstructure with changing geometry relies on trial and error-based processing followed by microstructural evaluation that places significant demands on time and costs associated with experimentation and characterization. We demonstrate herein that lightweight thermal models can be effectively used to predict microstructural changes with geometry. These models can in turn be used as precursors to developing geometry independent scan strategies and achieve microstructure control in various alloy systems. Even if the thermal signatures predicted by the model are not accurate, scan strategies can be developed to mimic the thermal conditions during initial process development. We present a case study on one of the most studied AM alloys: Ti-6Al-4V.

36 MATERIALS SCIENCE↗

Gaussian integral method for void fraction

Here, a novel method, the Gaussian Integral Method (GIM), is presented for calculating void fractions in Computational Fluid Dynamics–Discrete Element Method (CFD-DEM) simulations. GIM is versatile and applicable to various grid types, including structured and unstructured polyhedral meshes, without requiring special boundary treatments. An optimization technique is introduced to make GIM independent of grid resolution and type. The method is validated against experimental data from a fluidized bed, demonstrating that GIM produces realistic simulations closely resembling experimental observations. Additionally, unstructured polyhedral grids using GIM outperform structured grids of equivalent resolution, yielding results more aligned with experimental data. The gradient of the void fraction is computed in the CFD solver and utilized in the DEM solver for precise estimation at particle locations. Overall, GIM provides an effective solution for void fraction calculations in particulate media simulations with complex geometries, enhancing the accuracy and applicability of CFD-DEM simulations for industrial processes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

In situ contact angle measurements of liquid CO 2 , brine, and Mount Simon sandstone core using micro X-ray CT imaging, sessile drop, and Lattice Boltzmann modeling

Three techniques to measure and understand the contact angle, θ, of a CO 2 /brine/rock system relevant to geologic carbon storage were performed with Mount Simon sandstone. Traditional sessile drop measurements of CO 2 /brine on the sample were conducted and a water-wet system was observed, as is expected. A novel series of measurements inside of a Mount Simon core, using a micro X-ray computed tomography imaging system with the ability to scan samples at elevated pressures, was used to examine the θ of residual bubbles of CO 2 . Within the sandstone core the matrix appeared to be neutrally wetting, with an average θ around 90°. A large standard deviation of θ (20.8°) within the core was also observed. To resolve this discrepancy between experimental measurements, a series of Lattice Boltzmann model simulations were performed with differing intrinsic θ values. The model results with a θ = 80° were shown to match the core measurements closely, in both magnitude and variation. The small volume and complex geometry of the pore spaces that CO 2 was trapped in is the most likely explanation of this discrepancy between measured values, though further work is warranted.

42 ENGINEERING↗

Asynchronous GPU-based DEM solver embedded in commercial CFD software with polyhedral mesh support

A novel graphical processing unit-based discrete element method solver is introduced to improve stability, performance, and provide seamless integration into commercial or open-source computational fluid dynamics software. A key innovation is eliminating a need for network communication between solvers, which was previously required for cross-platform coupling. This is accomplished by a direct coupling method that employs dynamic-linked libraries. Furthermore, the solver optimizes memory usage by streamlining the particle-cell search algorithm by eliminating the cells' searching grid. This ensures the solver is compatible with a wide range of mesh types, providing high geometric flexibility. The approach simplifies the simulation process by directly incorporating computational fluid dynamics mesh information into the discrete element method solver. The performance analysis indicates about sixteen times boost in computational speed compared to benchmark central processing unit-based solvers. Finally, the solver's compatibility with polyhedral meshes, a vital advantage for complex geometries, is tested against a referenced study regarding the simulation of an immersed-tube fluidized bed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A visco-plastic constitutive model for accurate densification and shape predictions in powder metallurgy hot isostatic pressing

Powder metallurgy hot isostatic pressing (PM-HIP) is an advanced manufacturing process that produces near net shape parts with high material utilization and uniform microstructures. Despite being used frequently to produce small-scale components, the application of PM-HIP to large-scale components is limited due to inadequate understanding of its complex mechanisms that cause unpredictable post-HIP shape distortions. A computational model can provide necessary information about the intermediate and final stages of the HIP process that can help understand it better and make accurate predictions. Generally, two types of computational models are employed for PM-HIP of metal powders, namely, plastic and visco-plastic models. Between these, the plastic model is preferred due to its cheaper calibration approach requiring less experimental data. However, the plastic model sometimes produces incorrect predictions when slight variations of the HIP conditions are encountered in practical situations. Therefore, this work presents a visco-plastic model that addresses these limitations of the plastic model. A novel modified calibration approach is employed for the visco-plastic model that utilizes less experimental data than existing approaches. With the new approach, the data requirement is same for both plastic and visco-plastic models. This also enables a quantitative comparison of plastic and visco-plastic models, which have been only qualitatively compared in the past. When calibrated with the same experimental data, both the models are found to produce similar results. In conclusion, the calibrated visco-plastic model is applied to several complex geometries, and the predictions are found to be in good agreement with experimental observations.

Hot isostatic pressing↗

Programming approaches for scalability, performance, and portability of combustion physics codes

Here, this paper presents the process, strategy, and results associated with porting a typical combustion physics flow solver to current state-of-the-art and future massively-parallel computer architectures. Major focus is placed on the distinct algorithmic structure of these types of codes and how it can be integrated with modern programming paradigms for heterogeneous platforms (i.e., distributed many-core systems with accelerators). An end-to-end case study is presented that exemplifies the process in a generic manner, which then serves as a clear guide with respect to the strategy and best practices leading to a robust and adaptable framework that performs well, is durable over time, is portable, and requires minimal human-effort. This end is accomplished beginning with the use of a mature, validated, structured, multiblock code framework optimized for application of both Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS). This code has been ported to a variety of platforms over the past decade, including most recently the Oak Ridge Leadership Computing Facility’s “Summit” Platform. The experience gained on these multiple platforms provides general insights and thus the results presented are not specific to any one code or platform other than the overarching trend toward distributed many-core systems with accelerators in order to move toward exascale performance. The resultant performance and scalability of the ported code is demonstrated on a real-world application; a state-of-the-art rotating detonation rocket engine simulation that matches the complex geometry and boundary conditions imposed as part of a companion experimental campaign.

97 MATHEMATICS AND COMPUTING↗

Structural Optimization of a Direct-Drive Wind Turbine Generator Inspired by Additive Manufacturing

This study explores the structural freedom and design opportunities of additive manufacturing for a 5-MW direct-drive generator for a wind turbine and compares it to more traditional spoke-arm designs using NREL's GeneratorSE. The work focuses on light-weighting the stator within the generator, complementing previous rotor work. The light-weighting approach uses complex geometries and lattice structures made possible by additive manufacturing to realize increased strength with reduced mass. By reducing the mass at the top of the tower, wind turbines face lower loading along with decreased cost and improved structural stability. Furthermore, an altered bedplate support location facilitates lighter stator designs by better load transfer. Design optimization suggests additive manufacturing has the potential to transform generator designs to realize light-weighting. Since these machines are large, simulation and modeling are essential first steps before future experimental validation.

17 WIND ENERGY↗

Microstructural Analysis of Additively Manufactured 304L Stainless Steel Oxide Dispersion Strengthened Alloy

Selective laser melting (SLM) is one of the additive manufacturing (AM) process that utilizes laser for selectively melting and fusing of a thin layer of powder. This technique allows manufacturing a part directly from computer-aided design (CAD) models by dividing the part into a set of two-dimensional slices, which are built sequentially on top of another. Here, SLM technology enables manufacturing of complex geometries, such as parts with inner cooling channels which could be difficult or time consuming to make by conventional manufacturing processes.

36 MATERIALS SCIENCE↗

Electrodeposited Mo x S y O z /Ni Tribological Coatings

Deposition of molybdenum disulfide (MoS 2 ) coatings using physical vapor deposition (PVD) and mechanical burnishing has been widely assessed for solid lubricants in space applications but still suffers from line-of-sight constraints on complex geometries. Here, we highlight one of the first demonstrations of electrodeposited Mo x S y O z and Mo x S y O z /Ni thin-film coatings from aqueous solutions of ammonium tetrathiomolybdate for solid lubricant applications and their remarkable ability to provide low coefficients of friction and high wear resistance. Characterization of the coating morphology shows amorphous microstructures with a high oxygen content and cracking upon drying. Even so, electrodeposited Mo x S y O z can achieve low steady-state coefficients of friction (μ ∼ 0.05–0.06) and wear rates (2.6 × 10 –7 mm 3 /(N m)) approaching those of physical vapor deposited coatings (2.3 × 10 –7 mm 3 /(N m)). Additionally, we show that adding dopants such as nickel increased the wear rate (7.5 × 10 –7 mm 3 /(N m)) and initial coefficient of friction (μ i = 0.23) due to compositional modifications such as dramatic sub-stoichiometry (S/Mo ∼ 1) and expression of a NiO x surface layer, although doping did reduce the degree of cracking upon drying.

Babuska, Tomas F.↗

Rapid Solidification Effects in Additively Manufactured Si and SiGe Compositions

SiGe alloys have a proven track record as robust high-temperature thermoelectric materials, powering NASA missions like SNAP-10A, LES-9, and Voyager 1 and 2. Enhancing thermoelectric efficiency hinges on minimizing thermal conductivity while preserving electrical conductivity. Rapid solidification via LPBF can generate microstructural features such as subgrain cellular boundaries and twinning, which may help reduce thermal conductivity while preserving semiconducting behavior. Here, this study investigates the potential of laser powder bed fusion (LPBF) additive manufacturing to fabricate nanostructured Si and SiGe thermoelectric materials. High cooling rates (10 5 to 10 7 K/s) rates inherent to the LPBF process are conducive to forming such nanostructures. Moreover, this fabrication technique could also be suitable for fabricating complex geometries needed to achieve improved device level performance. Process mapping of commercial Si powder with irregular morphology was first performed to understand the LPBF processing behavior of this semiconductor material. Subsequent studies included in-house synthesized B-doped (p-type) Si7 8 Ge 22 spherical powder that was produced via ultrasonic atomization. Scan strategies involved multiple laser exposures to mitigate solidification cracking: a high density of >98% was achieved, but solidification cracking could not be fully eliminated. Subsequently, a high electrical resistivity (i.e., low conductivity) was observed, but the measured Seebeck coefficient, ∼230 μV/K @ 500 °C, proved that good semiconductor material was being fabricated. A subgrain cellular structure (5–10 μm) was observed as defined by Ge segregation to the intercellular boundaries. The remelting strategies helped lower the cooling rates in processing SiGe, but this still resulted in high residual stresses, which induced a remarkably high density of twins (78–95%) to accommodate the deformation. This unique grain structure offers an avenue for phonon scattering and potential improvements in thermoelectric performance.

figure of merit↗