Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Communities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Designing community surveys to provide a basis for noise policy

After examining reports from a large number of social surveys, two areas were identified where methodological improvements in the surveys would be especially useful for public policy. The two study areas are: the definition of noise indexes and the assessment of noise impact. Improvements in the designs of surveys are recommended which would increase the validity and reliability of the noise indexes. Changes in interview questions and sample designs are proposed which would enable surveys to provide measures of noise impact which are directly relevant for public policy.

Fields, J. M.↗

A simulator study for the development and evaluation of operating procedures on a supersonic cruise research transport to minimize airport-community noise

Piloted-simulator studies were conducted to determine takeoff and landing operating procedures for a supersonic cruise research transport concept that result in predicted noise levels which meet current Federal Aviation Administration (FAA) certification standards. With the use of standard FAA noise certification test procedures, the subject simulated aircraft did not meet the FAA traded-noise-level standards during takeoff and landing. However, with the use of advanced procedures, this aircraft meets the traded-noise-level standards for flight crews with average skills. The advanced takeoff procedures developed involved violating some of the current Federal Aviation Regulations (FAR), but it was not necessary to violate any FAR noise-test conditions during landing approach. Noise contours were also determined for some of the simulated takeoffs and landings in order to indicate the noise-reduction advantages of using operational procedures other than standard.

Grantham, W. D.↗

The small community solar thermal power experiment

Contractors were asked to develop a preferred system concept, to perform sensitivity analyses, and to outline recommended approaches for the follow-on design program of a one-megawatt solar thermal demonstration plant. The systems recommended by the contractors in each of the categories were: (1) McDonnell-Douglas Astronautics Company: Central tower with field of south-facing heliostats; (2) General Electric Company: Field of parabolic dishes with steam piped to a central turbine-generator unit; and (3) Ford Aerospace and Communications Corporation: Field of parabolic dishes with a Stirling cycle engine/generator unit at the focus of each dish. A description of each of the proposed experimental plants is given.

Kiceniuk, T.↗

Community sensitivity to changes in aircraft noise exposure

Interviews were conducted in the vicinity of Burbank Airport during a four month period during which a counterbalanced series of changes in aircraft noise exposure occurred due to runway repairs. Another interview was undertaken approximately one year after completion of the initial runway repairs. Noise measurements were made in conjunction with administration of a brief questionnaire to a near exhaustive sample of residents in four airport neighborhoods. The magnitude and direction of change of annoyance with aircraft noise exposure corresponded closely to the actual changes in physical exposure. Estimates were made of time constants for the rate of change of attitudes toward aircraft noise.

Fidell, S.↗

Discrimination of unique biological communities in the Mississippi lignite belt

Small scale hardcopy LANDSAT prints were manually interpreted and color infrared aerial photography was obtained in an effort to identify and map large contiguous areas of old growth hardwood stands within Mississippi's lignite belt which do not exhibit signs of recent disturbance by agriculture, grazing, timber harvesting, fire, or any natural catastrophe, and which may, therefore, contain unique or historical ecological habitat types. An information system using land cover classes derived from digital LANDSAT data and containing information on geology, hydrology, soils, and cultural activities was developed. Using computer-assisted land cover classifications, all hardwood remnants in the study area which are subject to possible disturbance from surface mining were determined. Twelve rare plants were also identified by botanists.

Miller, W. F.↗

The small community solar thermal power experiment. Parabolic dish technology for industrial process heat application

Aspects of incorporating a thermal energy transport system (ETS) into a field of parabolic dish collectors for industrial process heat (IPH) applications were investigated. Specific objectives are to: (1) verify the mathematical optimization of pipe diameters and insulation thicknesses calculated by a computer code; (2) verify the cost model for pipe network costs using conventional pipe network construction; (3) develop a design and the associated production costs for incorporating risers and downcomers on a low cost concentrator (LCC); (4) investigate the cost reduction of using unconventional pipe construction technology. The pipe network design and costs for a particular IPH application, specifically solar thermally enhanced oil recovery (STEOR) are analyzed. The application involves the hybrid operation of a solar powered steam generator in conjunction with a steam generator using fossil fuels to generate STEOR steam for wells. It is concluded that the STEOR application provides a baseline pipe network geometry used for optimization studies of pipe diameter and insulation thickness, and for development of comparative cost data, and operating parameters for the design of riser/downcomer modifications to the low cost concentrator.

Polzien, R. E.↗

Summary of community technology needs

Applications of the social sciences and engineering to solution of the problem of airport noise are summarized. Specific needs are outlined.

Bragdon, C. R.↗

The effect of concentrator field layout on the EE-1 small community solar power system

The point-focusing distributed receiver (PFDR) concept is employed by a number of solar thermal power systems currently under development. One type of PFDR system which shows particular promise incorporates distributed energy generation. According to this concept each parabolic dish collector is a self-contained power generation module, and a conventional electrical system is used to interconnect the modules. The concept is thus modular, and any number of power modules can be combined to achieve the required plant size. Given the benefits of mass production, it appears that this type of system can produce electricity at lower cost than is projected for conventional (fossil) power systems over the next decade. An employment of organic Rankine cycle heat engines is considered.

Pons, R. L.↗

Quantification of airport community noise impact in terms of noise levels, population density, and human subjective response

The Fraction Impact Method (FIM), developed by the National Research Council (NRC) for assessing the amount and physiological effect of noise, is described. Here, the number of people exposed to a given level of noise is multiplied by a weighting factor that depends on noise level. It is pointed out that the Aircraft-noise Levels and Annoyance MOdel (ALAMO), recently developed at NASA Langley Research Center, can perform the NRC fractional impact calculations for given modes of operation at any U.S. airport. The sensitivity of these calculations to errors in estimates of population, noise level, and human subjective response is discussed. It is found that a change in source noise causes a substantially smaller change in contour area than would be predicted simply on the basis of inverse square law considerations. Another finding is that the impact calculations are generally less sensitive to source noise errors than to systematic errors in population or subjective response.

Deloach, R.↗

The Landsat-D responsiveness to user community needs

Initial examinations of the Landsat-4 Multispectral Scanner and Thematic Mapper (IM) imagery indicate that these systems and the ground-based data processing systems are performing well. A combination of the spatial resolution of the multispectral scanner with the four band (0.5-0.6, 0.6-0.7, 0.7-0.8, and 0.8-1.1 microns) multispectral capability provides a useful observation technique for identifying crop type, phenological state of development, and a real condition assessment. Landsat multispectral scanner imagery has become more important in the search for new deposits of oil and mineral resources, and geological applications indicate that image analysis complements geological mapping techniques. Advantages of the TM include more precise measurements of the increased reflectance of vegetation in the green and near infrared. In addition, TM has improvement vegetation species differentiation, due to measurements made in new spectral bands. Preliminary TM data analysis reveals that systems have performed to optimum expectations.

Salomonson, V. V.↗

Organic Rankine power conversion subsystem development for the small community solar thermal power system

The development and preliminary test results for an air-cooled, hermetically sealed 20 kW sub E organic Rankine cycle engine/alternator unit for use with point focussing distributed receiver solar thermal power system. A 750 F toluene is the working fluid and the system features a high speed, single-stage axial flow turbine direct-coupled to a permanent magnet alternator. Good performance was achieved with the unit in preliminary tests.

Barber, R. E.↗

Comparison of LANDSAT-2 and field spectrometer reflectance signatures of south Texas rangeland plant communities

The accuracy was assessed for an atmospheric correction method that depends on clear water bodies to infer solar and atmospheric parameters for radiative transfer equations by measuring the reflectance signature of four prominent south Texas rangeland plants with the LANDSAT satellite multispectral scanner (MSS) and a ground based spectroradiometer. The rangeland plant reflectances produced by the two sensors were correlated with no significant deviation of the slope from unity or of the intercept from zero. These results indicated that the atmospheric correction produced LANDSAT MSS estimates of rangeland plant reflectances that are as accurate as the ground based spectroradiometer.

Richardson, A. J.↗

Visible absorbance spectra: A basis for in situ and passive remote sensing of phytoplankton concentration and community composition

The concentration and composition of phytoplankton populations are measured by an optical method which can be used either in situ or remotely. This method is based upon the in vivo light absorption characteristics of phytoplankton. To provide a data base for testing assumptions relative to the proposed method, visible absorbance spectra of pure cultures of 20 marine phytoplankton were obtained under laboratory conditions. Descriptive and analytical statistics were computed for the absorbance spectra and were used to make comparisons between members of major taxonomic groups and between groups. Spectral variation between the members of the major taxonomic groups was observed to be considerably less than the spectral variation between these groups. In several cases the differences between the mean absorbance spectra of major taxonomic groups are significant enough to be detected with passive remote sensing techniques.

Farmer, F. H.↗

Community rotorcraft air transporation: Opportunities and benefits

Opportunities and benefits of rotorcraft transportation are examined in light of the flight capabilities of rotorcraft. Promising helicopter scenarios include public service, public transportation, energy exploration, construction, cargo, agriculture/forestry, and other business/commercial uses.

Freund, D. J.↗

Continued research on selected parameters to minimize community annoyance from airport noise

A mathematical model of the annoyance created at an airport by aircraft operations is developed. The model incorporates population distribution considerations around an airport and the annoyance caused by aircraft noise. The objective function of this model corresponds to seeking to minimize total population annoyance created by all aircraft operations in a 24-hour period. Several factors are included in this model as constraint bounded. Demand for flight services is incorporated by including lower bounds on the number of operations by type of aircraft, runway used and time period. Also upper bounds on the number of operations for each runway are included. The mathematical model as formulated is recognized as corresponding to a nonlinear integer mathematical programming problem.

Frair, L.↗

Parametric and Nonparametric Analysis of LANDSAT TM and MSS Imagery for Detecting Submerged Plant Communities

The spatial, spectral and radiometric characteristics of LANDSAT TM and MSS imagery for detecting submerged aquatic vegetation are assessed. The problem is approached from two perspectives; purely stochastic or nonparametric in a radiative sense and theoretical in which radiative transfer equations are used to predict upwelling radiance at satellite altitude. The spectral and radiometric aspects of the theoretical approach are addressed with which a submerged plant canopy is distinguished from a surrounding bottom of sand or mud.

Ackleson, S. G.↗

Space station architectural issues as viewed by the user community - Applications

Potential applications of the proposed space station are briefly examined. Areas considered include communications (bulk traffic, direct broadcast, and assembly of GEO platforms), earth sciences (repair and refurbishment of long-term spacecraft), and materials processing. The importance of developing a comfortable habitat is stressed.

Raney, W. P.↗

Classification of vegetation communities in the Battle Mountain SE quadrangle, Nevada with MSS digital data

LANDSAT MSS digital data were utilized to identify vegetation types in an area of Battle Mountain SE in northern Nevada. Ways in which terrain data may improve spectral classification were investigated. The basic data set was a CCT of LANDSAT scene 82233617450, dated 15 June 1981. Seventeen ecotypic classifications were identified in the study area on the basis of field investigations. The percent cover by life form and non-living material for the 17 classes is summarized along with the percent cover by species for the 17 classes.

Ridd, M. K.↗