Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Colloid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Linking structural and rheological memory in disordered soft materials

Linking the macroscopic flow properties and nanoscopic structure is a fundamental challenge to understanding, predicting, and designing disordered soft materials. Under small stresses, these materials are soft solids, while larger loads can lead to yielding and the acquisition of plastic strain, which adds complexity to the task. In this work, we connect the transient structure and rheological memory of a colloidal gel under cyclic shearing across a range of amplitudes via a generalized memory function using rheo-X-ray photon correlation spectroscopy (rheo-XPCS). Our rheo-XPCS data show that the nanometer scale aggregate-level structure recorrelates whenever the change in recoverable strain over some interval is zero. The macroscopic recoverable strain is therefore a measure of the nano-scale structural memory. We further show that yielding in disordered colloidal materials is strongly heterogeneous and that memories of prior deformation can exist even after the material has been subjected to flow.

Kamani, Krutarth M. [Univ. of Illinois at Urbana-C↗
DOE OSTI2025

Polymer nanoparticle photocatalysts realized in non-aqueous solvents

Colloidal organic nanoparticles (oNPs) have emerged as a promising category of photocatalyst, thanks to their long-lived surface-bound charges, electronic tunability, and strong absorption in the visible spectrum. Our previous research has established a direct correlation between charge generation in oNPs and their photocatalytic activity, highlighting their effectiveness as a framework for stable, long-lived free carriers. However, oNPs have been restricted to use only in aqueous environments as a result of being synthesized via either nano-emulsion or nano-precipitation procedures. Herein, we present a method for transferring oNP photocatalysts from water into polar non-aqueous solvents while retaining their long-term colloidal stability. We observed that the polymer chains in the solvent-transferred oNPs rearrange from a predominantly H-aggregate structure in water to a combination of H- and J-aggregate characteristics in N,N-dimethylformamide, suggesting a dynamic rearrangement in response to the new solvent environment. Importantly, transient absorption and time-resolved microwave conductivity measurements confirm that the solvent-transferred oNPs maintain their ability to generate free charges at an internal heterojunction. This development opens unique opportunities for eventually leveraging light-generated, long-lived electrons and holes in synthetic redox chemistry across diverse solvent environments, a direction that will be explored in future studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The “energy gap law” for mid-infrared nanocrystals

Colloidal quantum dots are of increasing interest for mid-infrared detection and emission, but device performances will vastly benefit from reducing the non-radiative recombination. Empirically, the photoluminescence quantum yield decreases exponentially toward the mid-infrared, which appears similar to the energy gap law known for molecular fluorescence in the near-infrared. For molecules, the mechanism is electron–vibration coupling and fast internal vibrational relaxation. Here, we explore the possible mechanisms for inorganic quantum dots. The primary mechanism is assigned to an electric dipole near-field energy transfer from the quantum dot electronic transitions to the infrared absorption of surface organic ligands and then to the multiphonon absorption of the quantum dot inorganic core or the surrounding inorganic matrix. In order to obtain luminescent quantum dots in the 3–10 μm range, we motivate the importance of using inorganic matrices, which have a higher infrared transparency compared to organic materials. At longer wavelengths, inter-quantum dot energy transfer is noted to be much faster than radiative relaxation, indicating that bright mid-infrared colloidal quantum dot films might then benefit from dilution.

Chemistry↗
DOE OSTI2024

Spin echo small-angle neutron scattering using superconducting magnetic Wollaston prisms

Here, we show the implementation of superconducting magnetic Wollaston prisms for spin echo small-angle neutron scattering. Two calibration methods for the spin echo length are presented: one utilizing spin echo modulated small-angle neutron scattering and the other based on the neutron refraction by quartz wedge crystals. Our experimental results with polystyrene nano-particle colloids showcase the system’s efficacy in measuring both dilute and concentrated colloidal systems. Additionally, investigations into the pore diameter and pitch of a nano-porous alumina membrane demonstrate its capability in analyzing nano-porous materials. Furthermore, we discuss potential optimizations to further extend the accessible spin echo length.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Device-quality, reconfigurable metamaterials from shape-directed nanocrystal assembly

Significance Colloidal nanocrystals with defined sizes and shapes are ideal building blocks for nanofabrication. However, the ability to arbitrarily arrange them on surfaces with control over their orientation remains elusive. Here we report a shallow-template-assisted DNA-mediated assembly strategy to precisely arrange colloidal nanocrystals on surfaces, with single-particle control across submillimeter areas. In addition, the oligonucleotide bonds between the nanocrystals and substrate can be reversibly expanded and contracted enabling postsynthetic tunability of the assembled structures. Using this approach, we synthesized a nanocrystal-based, dynamically tunable metasurface (an anomalous reflector), thereby illustrating the potential for unique device construction via DNA programmable assembly.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Inherent-state melting and the onset of glassy dynamics in two-dimensional supercooled liquids

Below the onset temperature T o , the equilibrium relaxation time of most glass-forming liquids exhibits glassy dynamics characterized by a super-Arrhenius temperature dependence. In this supercooled regime, the relaxation dynamics also proceeds through localized elastic excitations corresponding to hopping events between inherent states, i.e., potential-energy-minimizing configurations of the liquid. Despite its importance in distinguishing the supercooled regime from the high-temperature regime, the microscopic origin of T o is not yet known. Here, we construct a theory for the onset temperature in two dimensions and find that an inherent-state melting transition, described by the binding–unbinding transition of dipolar elastic excitations, delineates the supercooled regime from the high-temperature regime. The corresponding melting transition temperature is in good agreement with the onset temperature found in various two-dimensional (2D) atomistic models of glass formers and an experimental binary colloidal system confined to a water–air interface. Additionally, we find the predictions for the renormalized elastic moduli to agree with the experimentally observed values for the latter 2D colloidal system. We further discuss the predictions of our theory on the displacement and density correlations at supercooled conditions, which are consistent with observations of the Mermin–Wagner fluctuations in experiments and molecular simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Reexpansion of charged nanoparticle assemblies in concentrated electrolytes

Electrostatic forces in solutions are highly relevant to a variety of fields, ranging from electrochemical energy storage to biology. However, their manifestation in concentrated electrolytes is not fully understood, as exemplified by counterintuitive observations of colloidal stability and long-ranged repulsions in molten salts. Highly charged biomolecules, such as DNA, respond sensitively to ions in dilute solutions. Here, we use non-base-pairing DNA-coated nanoparticles (DNA-NP) to analyze electrostatic interactions in concentrated salt solutions. Despite their negative charge, these conjugates form colloidal crystals in solutions of sufficient divalent cation concentration. We utilize small-angle X-ray scattering (SAXS) to study such DNA-NP assemblies across the full accessible concentration ranges of aqueous CaCl 2 , MgCl 2 , and SrCl 2 solutions. SAXS shows that the crystallinity and phases of the assembled structures vary with cation type. For all tested salts, the aggregates contract with added ions at low salinities and then begin expanding above a cation-dependent threshold salt concentration. Wide-angle X-ray scattering (WAXS) reveals enhanced positional correlations between ions in the solution at high salt concentrations. Complementary molecular dynamics simulations show that these ion–ion interactions reduce the favorability of dense ion configurations within the DNA brushes below that of the bulk solution. Measurements in solutions with lowered permittivity demonstrate a simultaneous increase in ion coupling and decrease in the concentration at which aggregate expansion begins, thus confirming the connection between these phenomena. Our work demonstrates that interactions between charged objects continue to evolve considerably into the high-concentration regime, where classical theories project electrostatics to be of negligible consequence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Partial PdAu nanoparticle embedding into TiO 2 support accentuates catalytic contributions from the Au/TiO 2 interface

Despite the broad catalytic relevance of metal–support interfaces, controlling their chemical nature, the interfacial contact perimeter (exposed to reactants), and consequently, their contributions to overall catalytic reactivity, remains challenging, as the nanoparticle and support characteristics are interdependent when catalysts are prepared by impregnation. Here, we decoupled both characteristics by using a raspberry-colloid-templating strategy that yields partially embedded PdAu nanoparticles within well-defined SiO 2 or TiO 2 supports, thereby increasing the metal–support interfacial contact compared to nonembedded catalysts that we prepared by attaching the same nanoparticles onto support surfaces. Between nonembedded PdAu/SiO 2 and PdAu/TiO 2 , we identified a support effect resulting in a 1.4-fold higher activity of PdAu/TiO 2 than PdAu/SiO 2 for benzaldehyde hydrogenation. Notably, partial nanoparticle embedding in the TiO 2 raspberry-colloid-templated support increased the metal–support interfacial perimeter and consequently, the number of Au/TiO 2 interfacial sites by 5.4-fold, which further enhanced the activity of PdAu/TiO 2 by an additional 4.1-fold. Theoretical calculations and in situ surface-sensitive desorption analyses reveal facile benzaldehyde binding at the Au/TiO 2 interface and at Pd ensembles on the nanoparticle surface, explaining the connection between the number of Au/TiO 2 interfacial sites (via the metal–support interfacial perimeter) and catalytic activity. Our results demonstrate partial nanoparticle embedding as a synthetic strategy to produce thermocatalytically stable catalysts and increase the number of catalytically active Au/TiO 2 interfacial sites to augment catalytic contributions arising from metal–support interfaces.

Lim, Kang Rui Garrick (ORCID:0000000321599844)↗
DOE OSTI2025

Collective behavior of “flexicles”

In recent years the functionality of synthetic active microparticles has edged even closer to that of their biological counterparts. However, we still lack the understanding needed to recreate at the microscale key features of autonomous behavior exhibited by microorganisms or swarms of macroscopic robots. In this study, we propose a model for a three-dimensional deformable cellular composite particle consisting of self-propelled rod-shaped colloids confined within a flexible vesicle—representing a superstructure we call a “flexicle” that couples particle deformation to the internal dynamics of the internal active components. Using molecular dynamics simulations, we investigate the collective behavior of dense systems composed of many flexicles. We show that individual flexicles exhibit shape changes upon collisions with other flexicles that lead to rearrangements of the internal active rods, which slows flexicle motion. This shape deformability gives rise to a diverse set of motility-induced phase separation phenomena and the spontaneous flow of flexicles reminiscent of the migration of cells in dense tissues. Our findings establish a foundation for designing responsive, cell-like active particles and developing strategies for controlling swarm migration and other autonomous swarm behaviors at cellular and colloidal scales.

Science & Technology - Other Topics↗
DOE OSTI2025

Mechanism of shape symmetry breaking in surfactant-mediated crystal growth

We present a dynamical model of crystal growth, in which it is possible to reliably achieve asymmetric products, beginning from symmetric initial conditions and growing within an isotropic environment. The asymmetric growth is the result of a positive feedback mechanism that amplifies the effect of thermal fluctuations in the coverage of surfactants on the growing crystalline facets. Within our simple model, we are able to understand the kinetic and thermodynamic factors involved in both the onset of symmetry breaking and the persistence of anisotropic growth. We demonstrate that the mechanism is general by studying models with increasing complexity. We argue that this mechanism of symmetry breaking underpins observations of colloidal, seed-mediated syntheses of single crystalline metal nanorods capped with strongly interacting surfactants. The parameters within our model are related to experimental observables such as the concentration, hydrophobicity, and binding strength of the surfactants, which suggests a potential route to optimize the yield of asymmetric products in colloidal nanoparticle syntheses.

Oaks-Leaf, Sam↗
DOE OSTI2025

Skyrmion-skyrmionium phase separation and laning transitions via spin-orbit torque currents

Many driven binary systems can exhibit laning transitions when the two species have different mobilities, such as colloidal particles with opposite charges in electric fields. Another example is pedestrian or active-matter systems, where particles moving in opposite directions form a phase-separated state that enhances the overall mobility. In this work, we use atomistic simulations to demonstrate that mixtures of skyrmions and skyrmioniums also exhibit pattern formation and laning transitions. Skyrmions move more slowly and at a finite skyrmion Hall angle compared to skyrmioniums, which move faster and without a skyrmion Hall effect. At low drives, the system forms a partially jammed phase where the skyrmioniums are dragged by the surrounding skyrmions, resulting in a finite angle of motion for the skyrmioniums. At higher drives, the system transitions into a laned state, but unlike colloidal systems, the lanes in the skyrmion-skyrmionium mixture are tilted relative to the driving direction due to the intrinsic skyrmion Hall angle. In the laned state, the skyrmionium angle of motion is reversed when it aligns with the tilted lane structure. At even higher drives, the skyrmioniums collapse into skyrmions. Below a critical skyrmion density, both textures can move independently with few collisions, but above this density, the laning state disappears entirely, and the system transitions to a skyrmion-only state. We map out the velocity and Hall responses of the different textures and identify three distinct phases: partially jammed, laned, and skyrmion-only moving crystal states. In conclusion, we compare our results to recent observations of tilted laning phases in pedestrian flows, where chiral symmetry breaking in the particle interactions leads to similar behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thixotropic spectra and Ashby-style charts for thixotropy

There is no universal model for thixotropy, and comparing thixotropic effects between different fluids is a subtle yet challenging problem. We introduce a generalized (model-insensitive) framework for comparing thixotropic properties based on thixotropic spectra. A superposition of exponential stress modes distributed over thixotropic time scales is used to quantify buildup and breakdown times and mode strengths in response to step-change input. This mathematical framework is tested with several experimental step-shear rate data on colloidal suspensions. Low-dimensional metrics based on moments of the distribution reveal characteristic average thixotropic properties, which are visualized on Ashby-style diagrams. This method outlines a framework for describing thixotropy across a diverse range of microstructures, supporting scientific studies as well as material selection for engineering design applications.

Mechanics↗
DOE OSTI2020

Programming van der Waals interactions with complex symmetries into microparticles using liquid crystallinity

Asymmetric interactions such as entropic (e.g., encoded by nonspherical shapes) or surface forces (e.g., encoded by patterned surface chemistry or DNA hybridization) provide access to functional states of colloidal matter, but versatile approaches for engineering asymmetric van der Waals interactions have the potential to expand further the palette of materials that can be assembled through such bottom-up processes. We show that polymerization of liquid crystal (LC) emulsions leads to compositionally homogeneous and spherical microparticles that encode van der Waals interactions with complex symmetries (e.g., quadrupolar and dipolar) that reflect the internal organization of the LC. Experiments performed using kinetically controlled probe colloid adsorption and complementary calculations support our conclusion that LC ordering can program van der Waals interactions by ~20 k B T across the surfaces of microparticles. Because diverse LC configurations can be engineered by confinement, these results provide fresh ideas for programming van der Waals interactions for assembly of soft matter.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Arrested-motility states in populations of shape-anisotropic active Janus particles

The emergence of large-scale collective phenomena from simple interactions between individual units is a hallmark of active matter systems. Active colloids with alignment-dominated interparticle interactions tend to develop orientational order and form motile coherent states, such as flocks and swarms. Alternatively, a combination of self-propulsion and excluded-volume interactions results in self-trapping and active phase separation into dense clusters. Here, we reveal unconventional arrested-motility states in ensembles of active discoidal particles powered by induced-charge electrophoresis. Combining experiments and computational modeling, we demonstrate that the shape asymmetry of the particles promotes the hydrodynamically assisted formation of active particles’ bound states in a certain range of excitation parameters, ultimately leading to a spontaneous collective state with arrested motility. Unlike the jammed clusters obtained through self-trapping, the arrested-motility phase remains sparse, dynamic, and reconfigurable. The demonstrated mechanism of phase separation seeded by bound state formation in ensembles of oblate active particles is generic and should be applicable to other active colloidal systems.

42 ENGINEERING↗
DOE OSTI2020

Critical differences in 3D atomic structure of individual ligand-protected nanocrystals in solution

Precise three-dimensional (3D) atomic structure determination of individual nanocrystals is a prerequisite for understanding and predicting their physical properties. Nanocrystals from the same synthesis batch display what are often presumed to be small but possibly important differences in size, lattice distortions, and defects, which can only be understood by structural characterization with high spatial 3D resolution. We solved the structures of individual colloidal platinum nanocrystals by developing atomic-resolution 3D liquid-cell electron microscopy to reveal critical intrinsic heterogeneity of ligand-protected platinum nanocrystals in solution, including structural degeneracies, lattice parameter deviations, internal defects, and strain. These differences in structure lead to substantial contributions to free energies, consequential enough that they must be considered in any discussion of fundamental nanocrystal properties or applications.

Kim, Byung Hyo↗
DOE OSTI2025

Ordered and disordered skyrmion states on a square substrate

We examine the ordering of skyrmions interacting with a square substrate created from a modulation of anisotropy using atomistic simulations. We consider fillings of ƒ = 1.5, 2.0, 2.5, 3.0, and 3.5 skyrmions per potential minimum as a function of magnetic field and sample size. For a filling of ƒ = 2.0, we find various dimer orderings, such as tilted dimer states, as well as antiferromagnetic ordering that is similar to the colloidal dimer ordering seen on square substrates. Furthermore, the ability of the skyrmions to change shape or annihilate produces additional states that do not occur in the colloidal systems. For certain parameters at ƒ = 2.0, half of the skyrmions can annihilate to form a square lattice, or a superlattice of trimers and monomers containing skyrmions of different sizes can form. At lower fields, ordered stretched skyrmion states can appear, and for zero field, there can be ordered stripe states. For ƒ = 3.0, we find ferromagnetic ordered trimers, tilted lattices, columnar lattices, and stretched phases. For fillings of ƒ = 1.5 and 2.5, we find bipartite lattices, different ordered and disordered states, and several extended disordered regions produced by frustration effects.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electrochemical Synthesis of Monodisperse Platinum-Cobalt Nanocrystals

The synthesis of platinum-cobalt nanocrystals (NCs) using colloidal solvothermal techniques is well understood. However, for monodisperse NCs to form, high temperatures and environmentally detrimental solvents are needed. We report a room temperature, aqueous method of platinum-cobalt NC synthesis using electrochemical reduction as the driving force for nucleation and growth. It is found that colloidal NCs will form in both the presence and absence of surfactant. Additionally, we report a monodisperse electrochemical deposition of NCs utilising a transparent conducting oxide electrode. The methods developed here will allow for a synthetic method to produce nanocatalysts with minimal environmental impact and should be readily applicable to other NC systems, including single- and multi-component alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

NA-22 Quarterly Report: April-June, 2020

At LLNL we contribute to two projects in NNSA-IAEC Science and Technology Working Group Area V: Basic Science of Waste Management & Subsurface Science. The motivation behind Topic Area V is to evaluate the scientific and safety case for an intermediate borehole to house Israel’s nuclear waste. WM1 (SNL lead) is Thermomechanical Damage (initially called Damage Accumulation and Wellbore Stability). This work focuses on evaluating the damage to the host rock induced by excavation and heat released from a possible radioactive waste repository/borehole. WM2 (LLNL lead) is Radionuclide Facilitated Transport in Carbonate Rock (initially called Colloidal Transport of Radionuclides). This work focuses on better understanding the transport of radionuclides and colloids from a nuclear waste repository/borehole in a vadose zone environment through experimentation and modeling. In the second quarter (this report) our work has been delayed in part due to COVID-19. LLNL went into shelter in place (SIP), minimum safe operations mid-March. Operations at LLNL have been slowly ramping up with 50% of the workforce back onsite in limited capacity and telecommuting widely used. The good news is that our labs opened up the last week in June and experiments are expected to start up again for WM2 Radionuclide Facilitated Transport in July. LLNL’s contribution to WM1 Thermochemical Damage modeling efforts also started back up in late June. We expect to be able to catch up on much of our work by the end of next quarter. The three national laboratories communication on a bi-monthly basis to make sure Area V projects remain on track and we have a monthly conference call with our Israeli counterparts to make sure we are communicating priorities and coordinating project details.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗