Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coding theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

An ab-initio Investigation: The Physical Properties of ScIr{sub 2} Superconductor

Using ab initio technique the physical properties of ScIr{sub 2} superconductor have been investigated with T{sub c} 1.03 K with a MgCu{sub 2}-type structure. We have carried out the plane-wave pseudopotential approach within the framework of the first-principles density functional theory (DFT) implemented within the CASTEP code. The calculated structural parameters confirm a good agreement with the experimental and other theoretical results. Using the Voigt-Reuss-Hill (VRH) averaging scheme the most important elastic properties including the bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio ν of ScIr{sub 2} are determined. At ambient condition, the values of Cauchy pressure and Pugh’s ratio exhibit ductile nature of ScIr{sub 2}. The electronic and optical properties of ScIr{sub 2} were investigated for the first time. The electronic band structure reveals metallic conductivity and the major contribution comes from Ir-5d states. In the ultraviolet region the reflectivity is high up to 50 eV as evident from the reflectivity spectrum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dancoff-based Wigner-Seitz approximation for the subgroup resonance self-shielding in the VERA neutronic simulator MPACT

The MPACT neutronics module of the Virtual Environment for Reactor Analysis (VERA) has used the subgroup method for resonance self-shielding calculation, for which two-dimensional (2D) fixed-source transport calculations are performed using the method of characteristics for resonance energy groups. When considering thermal feedbacks, the subgroup calculation must be performed at each outer iteration. Therefore, the computing time for cross section processing is a significant burden for computational efficiency. The Dancoff-based Wigner-Seitz approximation (DWA) capability has been implemented into MPACT in conjunction with the subgroup method, which has been used in SCALE/XSProc since SCALE version 6.0 and has recently been called an equivalent Dancoff-factor cell (EDC) method. The issue of relatively large reactivity bias in DWA for the gadolinia rods was resolved by introducing multiple Dancoff factors. Benchmark results for the VERA pressurized and boiling water reactor benchmark suites show that the DWA capability would significantly enhance computational efficiency with comparable accuracy. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Data driven methods to recognize patterns in EIC weak-strong simulation

Beam-Beam simulations are currently being studied in preparation for future EIC experiments to study beam-beam effects and, in turn, maximize luminosity. Weak-strong methods are studied for single-particle dynamics during collision. 1 million macro-particles for 1 million turns are typically tracked, corresponding to only 10 seconds in the EIC. The goal of this study is to predict beam properties over the scale of hours. A potential solution focuses on using data-driven methods such as machine learning methods to analyze and extend the insights of the beam properties such as long-term nonlinear effects. This would aid in long-term predictions where results would be more efficiently acquired than a typical tracking simulation. Some limitations such as inaccurate predictions and spatial complexity are also discussed. These methods can then be applied to strong-strong simulations in the future studies.

Accelerator Physics↗

Electromagnetic Pulse Excitation of Finite-Long Dissipative Conductors over a Conducting Ground Plane in the Frequency Domain.

This report details the modeling results for the response of a finite-length dissipative conductor interacting with a conducting ground to a hypothetical nuclear device with the same output energy spectrum as the Fat Man device. We use a frequency-domain method based on transmission line theory and implemented it in a code we call ATLOG - Analytic Transmission Line Over Ground. Select results are compared to ones computed using the circuit simulator Xyce. Intentionally Left Blank

24 POWER TRANSMISSION AND DISTRIBUTION↗

Transient and Steady-State Inverse Problems in Sierra/Aria

Inverse problems arise in a wide range of applications, whenever unknown model parameters cannot be measured directly. Instead, the unknown parameters are estimated using experimental data and forward simulations. Thermal inverse problems, such as material characterization problems, are often large-scale and transient. Therefore, they require intrusive adjoint-based gradient implementations in order to be solved efficiently. The capability to solve large-scale transient thermal inverse problems using an adjoint-based approach was recently implemented in SNL Sierra Mechanics, a massively parallel capable multiphysics code suite. This report outlines the theory, optimization formulation, and path taken to implement thermal inverse capabilities in Sierra within a unit test framework. The capability utilizes Sierra/Aria and Sierra/Fuego data structures, the Rapid Optimization Library, and an interface to the Sierra/InverseOpt library. The existing Sierra/Aria time integrator is leveraged to implement a time-dependent adjoint solver.

97 MATHEMATICS AND COMPUTING↗

VASP calculations on Chicoma: CPU vs. GPU [Slides]

Density functional theory (DFT) calculations with the VASP code provide insight into materials behavior. In particular, the behavior of Pu still poses challenges to our understanding. Calculations for a 108-atom system that represents delta phase Pu with one substitutional Ga show a significant speedup running on GPUs vs CPUs. The gain in speed (2.7), however, remains well below the ratio of SU per node hour conversions, 540/108 = 5.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

R-matrix Resolved Resonance Region Evaluation of 140,142 Ce

Oak Ridge National Laboratory completed the resolved resonance region (RRR) evaluation of the two most abundant cerium isotopes, 140 Ce (88.45%) and 142 Ce (11.11%), as requested by the US Nuclear Criticality Safety Program. These evaluations are based on recent high-resolution transmission and capture measurements performed on nat Ce and highly enriched 142 Ce samples at the JRC-Geel Linear Accelerator facility, as well as measured thermal constants available from the EXFOR database. Starting from the resonance parameters of the ENDF/B-VIII.0 library followed by a preliminary R-matrix analysis, an updated set of resonance parameters and corresponding covariance information were derived by fitting these measured data using the Reich–Moore approximation of the R -matrix theory, as implemented in the SAMMY code system. The 140 Ce RRR upper energy limit was kept at 200 keV, whereas the 142 Ce resonance region was extended from 13 to 26 keV. Updated statistical properties were obtained for the new evaluations and compared to those derived from the ENDF/B-VIII.0 nuclear data library. The new evaluation work improved some of the discrepancies found in previous work, such as the capture resonance integral and stellar Maxwellian-averaged cross sections. These integral quantities were mainly derived from the fit of the latest measured data, especially the neutron capture yield data for 142 Ce isotope.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Spacecraft surface charging as a function of material properties

Spacecraft material behavior plays a very important role in space missions. Spacecraft immersed in plasma get charged by absorbing plasma particles and by emitting electrons from spacecraft surfaces via photoelectron and secondary electron emission. Spacecraft charging depends heavily on material properties such as work function, secondary electron yield, dielectric constant, and electric conductivity among other. Material properties are typically assumed to be static in charging models. However, it is well known that this is not the case in space. This makes spacecraft charging predictions very challenging. Material properties are well characterized before the spacecraft is put in orbit through characterization in the lab under clean conditions. However, once in space, material properties change due to the harsh and very dynamic space environment. We present a new capability to predict material behavior in space from first-principles modeling. The ongoing effort seeks to couple material models, density functional theory (DFT) and molecular dynamic (MD) codes, with environment models, plasma kinetic codes. This preliminary study will show results of surface charging as a function of material work function, dielectric constant, and conductivity.

36 MATERIALS SCIENCE↗

On the Parallel and Oblique Firehose Instability in Fluid Models

A brief analysis of the proton parallel and oblique firehose instability is presented from a fluid perspective, and the results are compared with kinetic theory solutions obtained by the WHAMP code. It is shown that the classical CGL model very accurately describes the growth rate of these instabilities at sufficiently long spatial scales (small wavenumbers). The required stabilization of these instabilities at small spatial scales (high wavenumbers) naturally requires dispersive effects, and the stabilization is due to the Hall term and finite Larmor radius corrections to the pressure tensor. Even though the stabilization is not completely accurate, since at small spatial scales a relatively strong collisionless damping comes into effect, we find that the main concepts of the maximum growth rate and the stabilization of these instabilities is indeed present in the fluid description. However, there are differences that are quite pronounced when close to the firehose threshold, and that clarify the different profiles for marginally stable states with a prescribed maximum growth rate γ{sub max} in the simple fluid models considered here and the kinetic description.

79 ASTRONOMY AND ASTROPHYSICS↗

Ray tracing program with options for diffraction gratings

Diffraction theory, developed in vectorial form and coded into ray tracing routines, permits tracing rays of any wavelength through surfaces that are plane, spherical, conical, or aspheric polynomial. Ruled diffraction gratings may run in either X-direction or Y-direction, where Z is optical axis.

Howell, B. J.↗

Experiments in unsteady transonic flow

The static and dynamic response of a 0.5-m-chord airfoil were measured in the NASA-Ames 11- by 11-Foot Transonic Wind Tunnel. The effects of mean angle of attack, Reynolds number, oscillation mode, and frequency were investigated over a range of subsonic and transonic Mach numbers. Unsteady pressure distributions and loads on an oscillating NACA 64A010 airfoil are discussed. The unsteady pressure distributions are compared with classical subsonic theory and with newer unsteady aerodynamic codes. The experimental data are also used to assess the validity of linearity and modal superposition in the transonic-flow regime.

Davis, S. S.↗

Application of a personal computer for the uncoupled vibration analysis of wind turbine blade and counterweight assemblies

A research effort was undertaken to develop personal computer based software for vibrational analysis. The software was developed to analytically determine the natural frequencies and mode shapes for the uncoupled lateral vibrations of the blade and counterweight assemblies used in a single bladed wind turbine. The uncoupled vibration analysis was performed in both the flapwise and chordwise directions for static rotor conditions. The effects of rotation on the uncoupled flapwise vibration of the blade and counterweight assemblies were evaluated for various rotor speeds up to 90 rpm. The theory, used in the vibration analysis codes, is based on a lumped mass formulation for the blade and counterweight assemblies. The codes are general so that other designs can be readily analyzed. The input for the codes is generally interactive to facilitate usage. The output of the codes is both tabular and graphical. Listings of the codes are provided. Predicted natural frequencies of the first several modes show reasonable agreement with experimental results. The analysis codes were originally developed on a DEC PDP 11/34 minicomputer and then downloaded and modified to run on an ITT XTRA personal computer. Studies conducted to evaluate the efficiency of running the programs on a personal computer as compared with the minicomputer indicated that, with the proper combination of hardware and software options, the efficiency of using a personal computer exceeds that of a minicomputer.

White, P. R.↗

ICAN: A versatile code for predicting composite properties

The Integrated Composites ANalyzer (ICAN), a stand-alone computer code, incorporates micromechanics equations and laminate theory to analyze/design multilayered fiber composite structures. Procedures for both the implementation of new data in ICAN and the selection of appropriate measured data are summarized for: (1) composite systems subject to severe thermal environments; (2) woven fabric/cloth composites; and (3) the selection of new composite systems including those made from high strain-to-fracture fibers. The comparisons demonstrate the versatility of ICAN as a reliable method for determining composite properties suitable for preliminary design.

Ginty, C. A.↗

Probabilistic structural analysis to evaluate the structural durability of SSME critical components

NASA Lewis Research Center is currently developing probabilistic structural analysis methods for select Space Shuttle Main Engine (SSME) structural components. Briefly, the deterministic, three-dimensional, inelastic analysis methodology developed under the Hot Section Technology (HOST) and R and T Base Programs is being augmented to accommodate the complex probabilistic loading spectra, the thermoviscoplastic material behavior, and the material degradation associated with the environment of space propulsion system structural components representative of the SSME such as turbine blades, transfer ducts, and liquid-oxygen posts. The development of probabilistic structural analysis methodology consists of the following program elements: (1) composite load spectra; (2) probabilistic structural analysis methods; (3) probabilistic finite element theory - new variational principles; and (4) probabilistic structural analysis application. In addition, the program includes deterministic analysis elements: (1) development of structural tailoring computer codes (SSME/STAEBL); (2) development of dynamic creep buckling/ratcheting theory; (3) evaluation of the dynamic characteristics of single-crystal SSME blades; (4) development of SSME blade damper technology; and (5) development of integrated boundary elements for hotfluid structure interaction.

Chamis, Christos C.↗

Analytical and experimental evaluation of a 3-D hypersonic fixed-geometry, swept, mixed compression inlet

The performance of a fixed-geometry, swept, mixed compression hypersonic inlet is presented. The experimental evaluation was conducted for a Mach number of 6.0 and for several angles of attack. The measured surface pressures and pitot pressure surveys at the inlet throat are compared to computations using a three-dimensional Euler code and an integral boundary layer theory. Unique features of the intake design, including the boundary layer control, insure a high inlet performance. The experimental data show the inlet has a high mass averaged total pressure recovery, a high mass capture and nearly uniform flow diffusion. The swept inlet exhibits excellent starting characteristics, and high flow stability at angle of attack.

Agnone, Anthony M.↗