Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cockpit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Thresholds for detection of constant rotary acceleration during vibratory rotary acceleration

The effects of vibratory angular acceleration on detection thresholds for constant angular acceleration in a dynamic flight simulator are reported in three experiments. Detection thresholds were determined for 10 pilots and four nonpilots using a random, double-staircase procedure while the subjects sat erect in a device which rotated about an earth-vertical axis. Constant angular acceleration were presented for 0.5 and 1.0 s with concurrent, vibratory angular acceleration at 1 and 5 Hz, and thresholds with no vibratory angular acceleration were established. The thresholds were obtained while the subjects observed a visual reference in the enclosed cockpit in two experiments and in total darkness in a third. The results confirmed earlier experiments showing an inverse relationship between the duration of constant angular acceleration and detection threshold and showed that the detection thresholds in darkness were higher than with a visual reference present. Two analyses of variance revealed no significant differences in thresholds across the three vibration conditions. These results indicate that vibratory angular acceleration of fairly high levels can be present in a dynamic flight simulator without masking the pilot's ability to detect either maneuver or disturbance motions.

Clark, B.↗

A model for helicopter guidance on spiral trajectories

A point mass model is developed for helicopter guidance on spiral trajectories. A fully coupled set of state equations is developed and perturbation equations suitable for 3-D and 4-D guidance are derived and shown to be amenable to conventional state variable feedback methods. Control variables are chosen to be the magnitude and orientation of the net rotor thrust. Using these variables reference controls for nonlevel accelerating trajectories are easily determined. The effects of constant wind are shown to require significant feedforward correction to some of the reference controls and to the time. Although not easily measured themselves, the controls variables chosen are shown to be easily related to the physical variables available in the cockpit.

Mendenhall, S.↗

Model development for automatic guidance of a VTOL aircraft to a small aviation ship

This paper describes a detailed mathematical model which has been assembled to study automatic approach and landing guidance concepts to bring a VTOL aircraft onto a small aviation ship. The model is used to formulate system simulations which in turn are used to evaluate different guidance concepts. Ship motion (Sea State 5), wind-over-deck turbulence, MLS-based navigation, implicit model following flight control, lift fan V/STOL aircraft, ship and aircraft instrumentation errors, various steering laws, and appropriate environmental and human factor constraints are included in the model. Results are given to demonstrate use of the model and simulation to evaluate performance of the flight system and to choose appropriate guidance techniques for further cockpit simulator study.

Goka, T.↗

Engine diagnostics program: CF6-50 engine performance deterioration

Cockpit cruise recordings and test cell data in conjunction with hardware inspection results from airline overhaul shops were analyzed to define the extent and magnitude of performance deterioration of the General Electric CF6-50 high bypass turbofan engine. The magnitude of short term deterioration was isolated from the long term, and the individual damage mechanisms that were the cause for the majority of the performance deterioration was identified. It was determined that the long term engine performance deterioration characteristics were different for the 3 aircraft types currently powered by the CF6-50 engine, but these differences were due to operational considerations (flight length and takeoff derate) and not to differences associated with the aircraft type. Unrestored losses, that is, performance deterioration which remains after engine refurbishment, represents over 70 percent of the total performance deterioration at engine shop visit. Superficial damage, such as, increased surface roughness, leading edge shape changes on airfoils, and increases in the average clearances between rotating and stationary components is the major contributor to these losses. Seventy one percent of the unrestored losses are cost effective to restore, and if implemented could reduce fuel consumed by CF6-50 engines by 26 million gallons in 1980.

Wulf, R. H.↗

Winds and wind shear in-situ sensors

The problem of development of instrumentation for providing wind speed and direction information directly or indirectly to a pilot in the cockpit is considered. The pilots need for horizontal wind information at various stages of flight (i.e., at liftoff, in approach and departure corridors, and even in flight outside the terminal area) are emphasized.

Goff, R. C.↗

Flying qualities design criteria applicable to supersonic cruise aircraft

A comprehensive set of flying qualities design criteria was prepared for use in the supersonic cruise research program. The framework for stating the design criteria is established and design criteria are included which address specific failures, approach to dangerous flight conditions, flight at high angle of attack, longitudinal and lateral directional stability and control, the primary flight control system, and secondary flight controls. Examples are given of lateral directional design criteria limiting lateral accelerations at the cockpit, time to roll through 30 deg of bank, and time delay in the pilot's command path. Flight test data from the Concorde certification program are used to substantiate a number of the proposed design criteria.

Chalk, C. R.↗

Flight-test evaluation of STOL control and flight director concepts in a powered-lift aircraft flying curved decelerating approaches

Flight tests were carried out to assess the feasibility of piloted steep curved, and decelerating approach profiles in powered lift STOL aircraft. Several STOL control concepts representative of a variety of aircraft were evaluated in conjunction with suitably designed flight directions. The tests were carried out in a real navigation environment, employed special electronic cockpit displays, and included the development of the performance achieved and the control utilization involved in flying 180 deg turning, descending, and decelerating approach profiles to landing. The results suggest that such moderately complex piloted instrument approaches may indeed be feasible from a pilot acceptance point of view, given an acceptable navigation environment. Systems with the capability of those used in this experiment can provide the potential of achieving instrument operations on curved, descending, and decelerating landing approaches to weather minima corresponding to CTOL Category 2 criteria, while also providing a means of realizing more efficient operations during visual flight conditions.

Hindson, W. S.↗

The P/POD project: Programmable/Pilot Oriented Display

A pilot orientated display system was developed for general aviation aircraft in order to reduce cockpit workloads. Emphasis was placed on the optimization of flight procedural aspects (i.e., interpretation of Loran data). Low cost hardware/software were utilized in the system to reduce developmental costs. Parallel development and testing were conducted on the ground (simulator) and in the air using the same hardware.

Littlefield, J. A.↗

ATC simulation of helicopter IFR approaches into major terminal areas using RNAV, MLS, and CDTI

The introduction of independent helicopter IFR routes at hub airports was investigated in a real time air traffic control system simulation involving a piloted helicopter simulator, computer generated air traffic, and air traffic controllers. The helicopter simulator was equipped to fly area navigation (RNAV) routes and microwave landing system approaches. Problems studied included: (1) pilot acceptance of the approach procedure and tracking accuracy; (2) ATC procedures for handling a mix of helicopter and fixed wing traffic; and (3) utility of the cockpit display of traffic information (CDTI) for the helicopter in the hub airport environment. Results indicate that the helicopter routes were acceptable to the subject pilots and were noninterfering with fixed wing traffic. Merging and spacing maneuvers using CDTI were successfully carried out by the pilots, but controllers had some reservations concerning the acceptability of the CDTI procedures.

Tobias, L.↗

Effect of display size on utilization of traffic situation display for self-spacing task

The weather radar cathode ray tube (CRT) is the prime candidate for presenting cockpit display of traffic information (CDTI) in current, conventionally equipped transport aircraft. Problems may result from this, since the CRT size is not optimized for CDTI applications and the CRT is not in the pilot's primary visual scan area. The impact of display size on the ability of pilots to utilize the traffic information to maintain a specified spacing interval behind a lead aircraft during an approach task was studied. The five display sizes considered are representative of the display hardware configurations of airborne weather radar systems. From a pilot's subjective workload viewpoint, even the smallest display size was usable for performing the self spacing task. From a performane viewpoint, the mean spacing values, which are indicative of how well the pilots were able to perform the task, exhibit the same trends, irrespective of display size; however, the standard deviation of the spacing intervals decreased (performance improves) as the display size increased. Display size, therefore, does have a significant effect on pilot performance.

Abbott, T. S.↗

A flight investigation of simulated data-link communications during single-pilot IFR flight. Volume 1: Experimental design and initial test

A Flight Data Console simulation of a digital communication link to replace the current voice communication system used in air traffic control (ATC) was developed. The study determined how a digital communications system reduces cockpit workload, improve, flight proficiency, and is acceptable to general aviation pilots. It is shown that instrument flight, including approach and landing, can be accomplished by using a digital data link system for ATC communication.

Parker, J. F., Jr.↗

Simulator evaluation of the effects of reduced spoiler and thrust authority on a decoupled longitudinal control system during landings in wind shear

The effect of reduced control authority, both in symmetric spoiler travel and thrust level, on the effectiveness of a decoupled longitudinal control system was examined during the approach and landing of the NASA terminal configured vehicle (TCV) aft flight deck simulator in the presence of wind shear. The evaluation was conducted in a fixed-base simulator that represented the TCV aft cockpit. There were no statistically significant effects of reduced spoiler and thrust authority on pilot performance during approach and landing. Increased wind severity degraded approach and landing performance by an amount that was often significant. However, every attempted landing was completed safely regardless of the wind severity. There were statistically significant differences in performance between subjects, but the differences were generally restricted to the control wheel and control-column activity during the approach.

Miller, G. K., Jr.↗

Design and preliminary tests of an IR-airborne LLWS remote sensing system

Recent history underscores the need for in-cockpit alerts of LLWS for takeoffs and landings. The 13-15 micron portion of the CO2 molecular spectrum can be used to remote sense LLWS in and around thunderstorms. A radiometer with a designed look-distance of about 10 km remote senses an average air temperature along a forward, horizontal path. Wind shear alerts are based on the difference between this forward air temperature and the air temperature near the aircraft. Although spectral ranging, a major design improvement of an IR LLWS alert system, is not at present feasible with noncooled detectors, it is an important technique to keep in mind, given the rapid advance in IR technology.

Caracena, F.↗

Sensation of rotation about a vertical axis with a fixed visual field in different illuminations and in the dark

The effects of the oculogyro illusion of the relative motion of a spot fixed with respect to the subject during subject rotation and of a fixed striped peripheral visual field under different levels of illumination on perceptions of rotation about a vertical axis are investigated. Subjects were seated in a rotatable flight trainer cockpit with visual fields consisting of darkness, a dim peripheral field, and a bright peripheral field, all fixed with respect to the subject, and subject perceptual thresholds, frequency responses and sensations of displacement and velocity were measured during trainer rotation at constant and varying angular accelerations. The perception of angular acceleration is found to exhibit a significantly lower threshold and a reduced latency time in the illuminated visual fields which was independent of the level of illumination. Subjective frequency responses showed a higher gain in the illuminated presentations, while subjective displacements during triangular velocity stimuli exhibited no difference for the different visual cues. Finally, magnitude estimations of the after-rotation associated with deceleration from a constant velocity showed a greater rising speed, larger velocity and longer duration under illumination. Results show that, for low accelerations, the visual input enhances sensitivity to self-motion, an effect explained by the oculogyral illusion.

Huang, J.↗

Prediction and quickening in perspective flight displays for curved landing approaches

In an empirical test of various prediction and quickening display algorithms, 18 professional pilot-subjects made four curved-path landing approaches in a GAT-2 simulator using each of 18 dynamically different display configurations in a within-subject design. Results indicate that second- and third-order predictor displays provide the best lateral performance. Intermediate levels of prediction and quickening provide best vertical control. Prediction quickening algorithms of increasing computational order significantly reduce aileron, rudder, and elevator control responses, reflecting successive reductions in cockpit work load. Whereas conventional crosspointer displays are not adequate for curved landing approaches, perspective displays with predictors and some vertical dimension quickening are highly effective.

Jensen, R. S.↗

Flight test of a full authority Digital Electronic Engine Control system in an F-15 aircraft

The Digital Electronic Engine Control (DEEC) system considered is a relatively low cost digital full authority control system containing selectively redundant components and fault detection logic with capability for accommodating faults to various levels of operational capability. The DEEC digital control system is built around a 16-bit, 1.2 microsecond cycle time, CMOS microprocessor, microcomputer system with approximately 14 K of available memory. Attention is given to the control mode, component bench testing, closed loop bench testing, a failure mode and effects analysis, sea-level engine testing, simulated altitude engine testing, flight testing, the data system, cockpit, and real time display.

Barrett, W. J.↗

Modifications to CTVS TV cameras for space shuttle compatibility and evaluation

Five all solid state cockpit television system (CTVS) cameras, built to USAF requirements for high performance type F-16 aircraft, were modified and tested for possible use in the closed circuit television system on the space shuttle orbiter. The 400 HZ power supply in the electronics unit assembly was replaced with two DC/DC converters to enable operation from 28VDC spacecraft-type power sources. Nonessential circuit functions were deleted to minimize input power requirements. The normal 31 mm focal length lense assemblies were replaced with wider field-of-view 19 mm focal length lenses. Base plates for and housings were redesigned to facilitate mounting and heat-sinking of the camera in the space environment and short length (14") adapter cables were designed, fabricated, and tested to meet requirements for cameras configured to mount on the astronauts helmet/visor assembly. Technical requirements, design implementation, environmental tests, Modifications prodedures, and reliability/quality efforts are discussed. Schematics are included.

Hoagland, K.↗

Pilot estimates of glidepath and aim point during simulated landing approaches

Pilot perceptions of glidepath angle and aim point were measured during simulated landings. A fixed-base cockpit simulator was used with video recordings of simulated landing approaches shown on a video projector. Pilots estimated the magnitudes of approach errors during observation without attempting to make corrections. Pilots estimated glidepath angular errors well, but had difficulty estimating aim-point errors. The data make plausible the hypothesis that pilots are little concerned with aim point during most of an approach, concentrating instead on keeping close to the nominal glidepath and trusting this technique to guide them to the proper touchdown point.

Acree, C. W., Jr.↗