Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CO2 emission”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Limits to Creation of Oxygen-Rich Atmospheres on Planets in the Outer Reaches of the Conventional Habitable Zone

Abundant free oxygen appears to be a requirement for macroflora and macrofauna. To the best of our knowledge, a general discussion of which habitable planets are conducive to oxygen has not taken place. Theories for the rise of oxygen fall into 4 categories: (i) It is governed by an intrinsic rate of biological innovation, independent of environmental factors. (ii) It is caused by mantle evolution, probably consequent to secular cooling. (iii) It is caused by hydrogen escape, which irreversibly oxidizes the Earth. (iv) It is Gaia's response to the brightening Sun, its rise prevented until reduced greenhouse gases were no longer needed to maintain a clement climate. All but the first of these make implicit astronomical predictions that can be quantified and made explicit. Here we address the third hypothesis. In this hypothesis hydrogen escape acts like an hourglass that continues until all relevant reduced mineral buffers have been oxidized (titrated, as it were) and the surface made safe for O2. The hypothesis predicts that abundant free O2 will be absent from habitable planets that have not experienced significant hydrogen escape. Where hydrogen escape is modest or insignificant, the atmosphere can be approximated as hydrostatic, which makes assessing radiative cooling by embedded molecules, atoms, and ions such as CO2 and H3+ straightforward. In particular, H2 is efficient at exciting non-LTE CO2 15 micron emission, which makes radiative cooling very effective when H2 is abundant. We can therefore map out the region of phase space in which habitable planets do not lose hydrogen, and therefore do not develop O2 atmospheres. A related matter is the power of radiative cooling by embedded molecules to enforce the diffusion limit to hydrogen escape. This matter in particular is relevant to addressing the empirical observation that rocky planets with thin or negligible atmospheres are rarely or never bigger than approx.1.6 Earth radii.

Zahnle, Kevin↗
DOE OSTI2020

Technical Program Plan for INL Advanced Reactor Technologies Advanced Gas Reactor Fuel Development and Qualification Program

High-temperature gas cooled reactors (HTGRs) are graphite moderated nuclear reactors cooled with helium. Their high outlet temperatures and thermal energy conversion efficiency enable efficient and cost effective integration with non electricity generating applications. These applications include process heat and hydrogen production for petrochemical and other industrial processes that require operating temperatures between 300 and 900°C. HTGRs will supplement the use of premium fossil fuels such as oil and natural gas, improve overall energy security in the United States by reducing dependence on foreign fuels, and reduce carbon dioxide (CO2)/greenhouse gas emissions. The HTGR design uses helium as a coolant, graphite as a neutron moderator, and ceramic particle fuel. Helium is chemically inert and neutronically transparent. The graphite core slows down the neutrons, retains its strength at high temperatures, provides structural stability, and acts as a substantial heat sink during transient conditions. The ceramic particle fuel is extremely robust and retains the radioactive by products of the fission reaction within the coated particle under normal and off normal conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Technical Program Plan for INL Advanced Reactor Technologies Advanced Gas Reactor Fuel Development and Qualification Program

High-temperature gas cooled reactors (HTGRs) are graphite moderated nuclear reactors cooled with helium. Their high outlet temperatures and thermal energy conversion efficiency enable efficient and cost effective integration with non electricity generating applications. These applications include process heat and hydrogen production for petrochemical and other industrial processes that require operating temperatures between 300 and 900°C. HTGRs will supplement the use of premium fossil fuels such as oil and natural gas, improve overall energy security in the United States by reducing dependence on foreign fuels, and reduce carbon dioxide (CO2)/greenhouse gas emissions. The HTGR design uses helium as a coolant, graphite as a neutron moderator, and ceramic particle fuel. Helium is chemically inert and neutronically transparent. The graphite core slows down the neutrons, retains its strength at high temperatures, provides structural stability, and acts as a substantial heat sink during transient conditions. The ceramic particle fuel is extremely robust and retains the radioactive by products of the fission reaction within the coated particle under normal and off normal conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Technical Program Plan for INL Advanced Reactor Technologies Advanced Gas Reactor Fuel Development and Qualification Program

High-temperature gas cooled reactors (HTGRs) are graphite moderated nuclear reactors cooled with helium. Their high outlet temperatures and thermal energy conversion efficiency enable efficient and cost effective integration with non electricity generating applications. These applications include process heat and hydrogen production for petrochemical and other industrial processes that require operating temperatures between 300 and 900°C. HTGRs will supplement the use of premium fossil fuels such as oil and natural gas, improve overall energy security in the United States by reducing dependence on foreign fuels, and reduce carbon dioxide (CO2)/greenhouse gas emissions. The HTGR design uses helium as a coolant, graphite as a neutron moderator, and ceramic particle fuel. Helium is chemically inert and neutronically transparent. The graphite core slows down the neutrons, retains its strength at high temperatures, provides structural stability, and acts as a substantial heat sink during transient conditions. The ceramic particle fuel is extremely robust and retains the radioactive by products of the fission reaction within the coated particle under normal and off normal conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2011

Ground and Airborne Methane Measurements Using Optical Parametric Amplifiers

We report on ground and airborne methane measurements with an active sensing instrument using widely tunable, seeded optical parametric generation (OPG). The technique has been used to measure methane, CO2, water vapor, and other trace gases in the near and mid-infrared spectral regions. Methane is a strong greenhouse gas on Earth and it is also a potential biogenic marker on Mars and other planetary bodies. Methane in the Earth's atmosphere survives for a shorter time than CO2 but its impact on climate change can be larger than CO2. Carbon and methane emissions from land are expected to increase as permafrost melts exposing millennial-age carbon stocks to respiration (aerobic-CO2 and anaerobic-CH4) and fires. Methane emissions from c1athrates in the Arctic Ocean and on land are also likely to respond to climate warming. However, there is considerable uncertainty in present Arctic flux levels, as well as how fluxes will change with the changing environment. For Mars, methane measurements are of great interest because of its potential as a strong biogenic marker. A remote sensing instrument that can measure day and night over all seasons and latitudes can localize sources of biogenic gas plumes produced by subsurface chemistry or biology, and aid in the search for extra-terrestrial life. In this paper we report on remote sensing measurements of methane using a high peak power, widely tunable optical parametric generator (OPG) operating at 3.3 micrometers and 1.65 micrometers. We have demonstrated detection of methane at 3.3 micrometers and 1650 nanometers in an open path and compared them to accepted standards. We also report on preliminary airborne demonstration of methane measurements at 1.65 micrometers.

Numata, Kenji↗
NASA NTRS2013

Analyzing Carbon Dioxide and Methane Emissions in California Using Airborne Measurements and Model Simulations

Greenhouse gas (GHG) concentrations have increased over the past decades and are linked to global temperature increases and climate change. These changes in climate have been suggested to have varying effects, and uncertain consequences, on agriculture, water supply, weather, sea-level rise, the economy, and energy. To counteract the trend of increasing atmospheric concentrations of GHGs, the state of California has passed the California Global Warming Act of 2006 (AB-32). This requires that by the year 2020, GHG (e.g., carbon dioxide (CO2) and methane (CH4)) emissions will be reduced to 1990 levels. To quantify GHG fluxes, emission inventories are routinely compiled for the State of California (e.g., CH4 emissions from the California Greenhouse Gas Emissions Measurement (CALGEM) Project). The major sources of CO2 and CH4 in the state of California are: transportation, electricity production, oil and gas extraction, cement plants, agriculture, landfills/waste, livestock, and wetlands. However, uncertainties remain in these emission inventories because many factors contributing to these processes are poorly quantified. To alleviate these uncertainties, a synergistic approach of applying air-borne measurements and chemical transport modeling (CTM) efforts to provide a method of quantifying local and regional GHG emissions will be performed during this study. Additionally, in order to further understand the temporal and spatial distributions of GHG fluxes in California and the impact these species have on regional climate, CTM simulations of daily variations and seasonality of total column CO2 and CH4 will be analyzed. To assess the magnitude and spatial variation of GHG emissions and to identify local “hot spots”, airborne measurements of CH4 and CO2 were made by the Alpha Jet Atmospheric eXperiment (AJAX) over the San Francisco Bay Area (SFBA) and San Joaquin Valley (SJV) in January and February 2013 during the Discover-AQ-CA study. High mixing ratios of GHGs were observed in-flight with a high degree of spatial variability. To provide an additional method to quantify GHG emissions, and analyze AJAX measurement data, the GEOS-Chem CTM is used to simulate SFBA/SJV GHG measurements. A nested-grid version of GEOS-Chem will be applied and utilizes varying emission inventories and model parameterizations to simulate GHG fluxes/emissions. The model considers CO2 fluxes from fossil fuel use, biomass/biofuel burning, terrestrial and oceanic biosphere exchanges, shipping and aviation, and production from the oxidation of carbon monoxide, CH4, and non-methane volatile organic carbons. The major sources of CH4 simulated in GEOS-Chem are domesticated animals, rice fields, natural gas leakage, natural gas venting/flaring (oil production), coal mining, wetlands, and biomass burning. Preliminary results from the comparison between available observations (e.g., AJAX and CALGEM CH4 emission maps) and GEOS-Chem results will be presented, along with a discussion of CO2 and CH4 source apportionment and the use of the GEOS-Chem-adjoint to perform inverse GHG modeling.

Johnson, Matthew S.↗
DOE OSTI2024

Enhanced Rock Weathering for Carbon Dioxide Removal: Life Cycle Analysis and Techno-Economic Assessment

The study models enhanced rock weathering (ERW) using minerals such as basalt and olivine in terrestrial environments. Our analysis shows potential for ERW CO2 removal and storage costs to approach US$ 100 per tonne (t) of CO2 removed and stored under certain conditions (2023 dollars). In the environmental analysis, the 100-year global warming potential impact with igneous rock and industrial waste materials ranges from 34–263 and 23–180 kg CO2-eq per tonne of CO2 removed and stored, respectively (these values result in overall emissions (removed minus emitted) between –977 and –737 kg CO2-eq net removed per tonne of CO2 removed and stored, meaning for every tonne of CO2 removed by ERW, after accounting for the CO2 equivalent emissions from the GWP, the overall emissions are negative.

Priyadarshini, NFN [NETL Site Support Contractor, ↗
NASA NTRSDate not supplied

SERVIR: Cross-Comparison of Carbon Emission Estimates Based on Variable Land Use Land Cover Changes within SERVIR Focus Regions

Deforestation in the tropics contributes approximately one-fifth of the annual global greenhouse gas (GHG) emissions. In an effort to reduce GHG emissions, SERVIR - a joint USAID and NASA initiative - is currently implementing the SERVIR CArbon Pilot (S-CAP) activity. By developing a comprehensive CO2 tracking system in Google Earth Engine based on both remotely sensed data and in situ observations, S-CAP aims to build capacity within the SERVIR regional hubs to improve decision making and local monitoring efforts surrounding GHG emissions. The S-CAP estimations are being completed throughout 11 pilot countries within the SERVIR regions of Asia, Africa, and the Americas to integrate partner contributions and local input into the development process. These emission estimate calculations use country-level REDD+ FREL reported values, global remotely sensed data (e.g. Global Forest Watch) and regional datasets and are completed using the IPCC Guidelines for National Greenhouse Gas Inventories. From the S-CAP activity thus far, country CO2 estimations had varied differences, ranging from 56% to 197% between their lowest and highest estimates. The results from this study show that CO2 emission estimates can differ greatly depending on the land cover data sets used as well as the biomass values, and how a comprehensive database is essential in understanding the full range of impacts that land cover change has in these regions. Using this ensemble approach, SERVIR hubs can better select the most appropriate datasets available for estimating emissions.

Carbon Emission↗
DOE OSTI2024

Carbon Management Projects (CONNECT) Database and Explorer

Overview The Carbon Management Projects (CONNECT) Toolkit is an online exploratory visualization tool developed by the U.S. Department of Energy's (DOE) Office of Fossil Energy and Carbon Management (FECM) with support from other federal agencies such as the U.S. Environmental Protection Agency (EPA) and the U.S. Department of Transportation (DOT). It provides a single point of access to authoritative information on federal agency investment in a portfolio of research, development, and demonstration (RD&D) projects that have been publicly announced to advance technologies for point source carbon capture, carbon dioxide removal, transport, storage, and conversion, collectively referred to as carbon management. The RD&D programs covered in this tool are authorized by annual congressional appropriations ("Base Program") and the 2021 Infrastructure Investment and Jobs Act (IIJA). The tool also incorporates public information on other federal initiatives, such as the Regional Clean Hydrogen Hubs, and public information released by other government agencies, such as the Environmental Protection Agency's (EPA) and Primacy States’ Underground Injection Control Class VI permits and EPA’s facility level greenhouse gas (GHG) emissions. Developed in a geographic information system, the tool organizes carbon management projects into five groups based on the primary technology that a project aims to advance, each visually represented as a digital layer ("carbon management project layer"). Only federally funded projects are included, which can be awarded projects that are completed or ongoing, or projects that have been selected but are currently under negotiation. Project information can be viewed in the map or in the attribute table below it when turned on. In the map view, each project is displayed at either its host site (for field work), where available, or its performer site (project lead's location, further explained in the table below). Host sites and performer sites are represented in distinct icons. Several reference layers offer additional public information on infrastructural and natural resource environment for carbon management. These reference layers, combined with multiple geographical basemaps, enable users to visualize the carbon management project layers in context. Carbon management project information will be updated monthly based on feedback and information availability. Carbon management project layers Point Source Carbon Capture (PSC) This layer contains DOE-funded projects focused on capturing carbon dioxide (CO2) from power plants or industrial facilities. Carbon Dioxide Removal (CDR) This layer contains DOE-funded projects focused on capturing CO2 from the atmosphere, including direct air capture (DAC) and DAC hubs, direct ocean capture, enhanced mineralization, and biomass carbon removal and storage. For projects with multiple host sites, each of the sites are displayed individually with the project cost and cost sharing information representing the total for the entire project. Carbon Transport This layer contains DOE- and DOT-funded projects focused on CO2 transport. The Transport Research and Development sublayer contains projects that do not involve physical infrastructure; the Proposed Transport Corridor sublayer contains projects for which either a route for the transport infrastructure has been proposed or a general area for the transport infrastructure has been identified. Carbon Storage This layer contains DOE-funded key projects focused on CO2 storage. For projects with multiple field-work sites, each of the sites are displayed individually on the map with the project cost and cost sharing information representing the overall total for the entire project. Carbon Conversion This layer contains DOE-funded projects focused on converting CO2 into economically valuable products. Reference layers The following layers provide additional information in the geographic proximity of carbon management projects. Users should reference the original sources for more details (weblinks provided below and in pop-up windows on the map). Regional Clean Hydrogen Hub and Facility These layers illustrate the approximate areas of the Regional Clean Hydrogen Hubs announced by DOE's Office of Clean Energy Demonstrations (OCED) and the approximate locations of individual facilities that constitute the hubs (see "Where are the H2Hubs located?" on the webpage linked above). EPA Facility Level GHG Emissions (direct emitter) This layer shows direct CO2 emissions from stationary sources in 2022, using data extracted from EPA's Facility Level Information on GreenHouse gases Tool (FLIGHT). Captured and injected CO2 are not deducted from direct emitters’ total emissions. Contact EPA for additional details. Underground Injection Control Class VI permit/permit application This layer shows the locations of CO2 injection wells that are granted or in the process of applying for an Underground Injection Control Class VI permit by EPA or a Primacy State (currently Louisiana, North Dakota, and Wyoming). The URLs for the permits or permit applications are provided in the pop-up windows associated with the well locations. Contact EPA for additional details. Carbon Storage Resource This layer contains information on prospective CO2 storage resources in saline formations and oil and gas reservoirs provided by the National Carbon Sequestration Database and Geographic Information System (NATCARB) spatial database. Contact NETL for additional details. Existing CO2 pipeline This layer shows active CO2 pipelines based on information digitized from the map issued by the Pipeline and Hazardous Materials Safety Administration (PHMSA). Contact PHMSA for additional details.

Carbon Conversion↗
DOE OSTI2025

A Framework for Assessing Economic and Environmental Trade-offs of Internalized Emission Costs in ERCOT Grid Planning

The power grid is on the cusp of a massive transition driven by three major areas: 1) the growth in demand for electricity, 2) efforts to decarbonize the United States economy, and 3) a desire to mitigate social disparities from the impact of electricity generation on local populations. However, most studies of the electricity sector do not include equity impacts in their models. This study seeks to do so by developing a comprehensive and generalizable model tailored to the Electric Reliability Council of Texas (ERCOT) grid, designed to incorporate the equity impacts of electricity generation in a decarbonized and resilient framework. To integrate equity into our research, we incorporate environmental externalities into our capacity expansion model of ERCOT. Specifically, we factor in intermediate-level local marginal damages of precursor pollutants (NH3, NOx, primary PM2.5, SO2, and VOC) and global pollutant CO2 into the cost of generating electricity. We do this by taking into account county population, county ambient pollution concentration, and generator emission rates. Leveraging open-source modeling tools, such as PowerGenome, pyGRETA, and GenX we construct a county-level model to account for these costs. We integrate these marginal damages into the variable operations and maintenance costs of generators, for both existing and potential future builds. This study’s findings suggest that the value of a dynamic social cost of carbon (SSC) will cover criteria pollutant marginal damages within the ERCOT grid and solar and wind is expected to increase out to 2035. Key metrics evaluated within this research include fuel mix distribution across technologies, transmission and grid infrastructure costs, CO2 emissions, local pollutants marginal damages, and the variation in generation capacity built by the model. These results and framework can be used to support grid decisions that explicitly include distributional and procedural equity within a decarbonized and sustainable grid framework.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1993

The Venus atmospheric response to solar cycle variations

Atmospheric drag measurements from the orbital decay of the Pioneer Venus Orbiter and Magellan spacecraft have recently been obtained of the Venus dayside and nightside atmosphere between 130 and 210 km during a period of low solar activity. These new measurements, combined with the earlier Pioneer Venus drag measurements (1978-80) obtained near the maximum of the 11-year solar cycle, have allowed the detection of the detailed response of temperature, atomic oxygen and carbon dioxide to solar variations. We have found a weak but detectable temperature response on the dayside which is in accord with the response predicted by Keating and Bougher when they assumed very strong CO2 radiative cooling resulting from atomic oxygen exciting CO2 into 15 micron emission. This same radiative process may cause strong cooling in the Earth's upper atmosphere with the doubling of CO2 in the future. With decreasing solar activity, the O/CO2 ratio in the lower thermosphere is found to decrease, apparently due to decreased photodissociation of CO2 and lower temperatures. The percent decrease in atomic oxygen with decreasing solar activity on the dayside is found to be approximately the same as the percent decreases of atomic oxygen transported to the nightside. A very weak response of nightside temperatures to solar activity variations has also been detected.

Keating, Gerald M.↗
NASA NTRS1993

The Venus Atmospheric Response to Solar Cycle Variations

Atmospheric drag measurements from the orbital decay of the Pioneer Venus Orbiter and Magellan spacecraft have recently been obtained of the Venus dayside and nightside atmosphere between 130 and 210 km during a period of low solar activity. These new measurements, combined with the earlier Pioneer Venus drag measurements (1978-80) obtained near the maximum of the 11-year solar cycle, have allowed the detection of the detailed response of temperature, atomic oxygen and carbon dioxide to solar variations. We have found a weak but detectable temperature response on the dayside which is in accord with the response predicted by Keating and Bougher when they assumed very strong CO2 radiative cooling resulting from atomic oxygen exciting CO2 into 15 micron emission. This same radiative process may cause strong cooling in the Earth's upper atmosphere with the doubling of CO2 in the future. With decreasing solar activity, the O/CO2 ratio in the lower thermosphere is found to decrease, apparently due to decreased photodissociation of CO2 and lower temperatures. The percent decrease in atomic oxygen with decreasing solar activity on the dayside is found to be approximately the same as the percent decreases of atomic oxygen transported to the nightside. A very weak response of nightside temperatures to solar activity variations has also been detected.

Keating, Gerald M.↗
NASA NTRS1972

Mariner 6 and 7 ultraviolet spectrometer experiment - Implications of CO2/+/, CO, and O airglow.

The Mariner 6 and 7 UV spectrometer experiments observed intense emissions from CO, O, and CO2(+) in the Martian airglow. Analysis shows that they are excited predominantly by the absorption of solar EUV photons by CO2 and constitute a major energy-loss mechanism for the thermosphere. Models of the thermospheric temperature profile and the airglow layer that demonstrate the effects of neutral chemistry and ionospheric composition are developed. With their aid, the observed CO Cameron-band emission scale height of 19 (plus or minus 4.5) km is shown to suggest an exospheric temperature of 315 (plus or minus 75) K. Consideration of other data suggests a 'best' value of about 350 K. Within the uncertainties in the excitation efficiencies and in the thermospheric cooling mechanisms, the observations are consistent with the measured electron density. There is no indication in the data that the ionosphere is modified by the solar wind below 200 km.

Stewart, A. I.↗
NASA NTRS2023

The Hazard Components of Representative Key Risks. The Physical Climate Perspective

The framework of Representative Key Risks (RKRs) has been adopted by the Intergovernmental Panel on Climate Change Working Group II (WGII) to categorize, assess and communicate a wide range of regional and sectoral key risks from climate change. These are risks expected to become severe due to the potentially detrimental convergence of changing climate conditions with the exposure and vulnerability of human and natural systems. Other papers in this special issue treat each of eight RKRs holistically by assessing their current status and future evolution as a result of this convergence. However, in these papers, such assessment cannot always be organized according to a systematic gradation of climatic changes. Often the big-picture evolution of risk has to be extrapolated from either qualitative effects of “low”, “medium” and “high” warming, or limited/focused analysis of the consequences of particular mitigation choices (e.g., benefits of limiting warming to 1.5 or 2C), together with consideration of the socio-economic context and possible adaptation choices. In this study we offer a representation – as systematic as possible given current literature and assessments – of the future evolution of the hazard components of RKRs. We identify the relevant hazards for each RKR, based upon the WGII authors’ assessment, and we report on their current state and expected future changes in magnitude, intensity and/or frequency, linking these changes to Global Warming Levels (GWLs) to the extent possible. We draw on the assessment of changes in climatic impact-drivers relevant to RKRs described in the 6th Assessment Report by Working Group I supplemented when needed by more recent literature. For some of these quantities - like regional trends in oceanic and atmospheric temperature and precipitation, some heat and precipitation extremes, permafrost thaw and Northern Hemisphere snow cover - a strong and quantitative relationship with increasing GWLs has been identified. For others - like frequency and intensity of tropical cyclones and extra-tropical storms, and fire weather - that link can only be described qualitatively. For some processes - like the behavior of ice sheets, or changes in circulation dynamics - large uncertainties about the effects of different GWLs remain, and for a few others - like ocean pH and air pollution - the composition of the scenario of anthropogenic emissions is most relevant, rather than the warming reached. In almost all cases, however, the basic message remains that every small increment in CO2 concentration in the atmosphere and associated warming will bring changes in climate phenomena that will contribute to increasing risk of impacts on human and natural systems, in the absence of compensating changes in these systems’ exposure and vulnerability, and in the absence of effective adaptation. Our picture of the evolution of RKR-relevant climatic impact-drivers complements and enriches the treatment of RKRs in the other papers in at least two ways: by filling in their often only cursory or limited representation of the physical climate aspects driving impacts, and by providing a fuller representation of their future potential evolution, an important component – if never the only one – of the future evolution of risk severity.

Representative Key Risks↗
NASA NTRS1995

The Rovibrational Intensities of the (40 deg 1) and (00 deg 0) Pentad Absorption Bands of 12C16O2 Between 7284 and 7921 cm(exp-1)

Carbon dioxide is the major constituent of the atmospheres of both Mars and Venus. Correct interpretations of spectra of these atmospheres require accurate knowledge of a substantial number of absorption bands of this gas. This is especially true for Venus; many weak CO2 bands that are insignificant in the earth's atmosphere are prominent absorbers in Venus' hot, dense lower atmosphere. Yet, recent near-infrared spectra of Venus' nightside have discovered emission windows, which occur between CO2 absorption bands, at 4040-4550 cm(exp-1), 5700-5900 cm(exp-1), and several smaller ones between 7500 and 9400 cm(exp-1). This radiation is due to thermal emission from Venus' lower atmosphere, diminished by scattering and absorption within the sulfuric acid clouds on its way to space. Simulations of these data with radiative transfer models can provide improved information on the abundances of a number of constituents of the lower atmosphere (e.g. H2O, CO, HDO, HCl, HF, and OCS) and the optical properties of the clouds, whose spatial variation modulates the brightness of the emissions. However, the accuracy of these retrievals has been limited by insufficient knowledge of the opacity of some of the gas species, including CO2, at the large pathlengths and high temperatures and pressures that exist on Venus. In particular, modeling the emission spectrum did not produce a good fit for the emission window centered at 7830 cm(exp-1). In an ongoing effort to assist analyses of these Venus spectra, we have been making laboratory intensity measurements of several weak bands of CO2 which are significant absorbers in these Venus emission windows. The CO2 bands that are prominent in the 7830 cm(exp-1) region belong to the vibrational sequence 4v1+v3 and associated hot bands. Only 2 of the 5 bands of this sequence have been previously measured. Modeling Venus' emission spectrum in the 7830 cm(exp-1) region had to rely on calculated intensity values for the weak ground state band at 7921 cm-1 and the associated hot bands. Since the calculated intensities of ground state bands are known to have significant uncertainties, we decided to measure this (40 deg 1)I (left arrow) (00 deg 0) band with the Ames 25 meter multiple reflection absorption cell and Fourier transform spectrometer. We also measured the (40 deg 1) (sub IV) (left arrow) (00 deg 0) band at 7460 cm(exp-1), which also had not been previously measured. These measurements are reported in this article, and we also give our reanalysis of the prior measurements of the (40 deg 1) (sub III) (left arrow) (00 deg 0) bands. These measurements provide the basis for improving calculated intensities for related hot bands as well as simulations of Venus' spectrum.

Giver, L. P.↗
DOE OSTI2023

NETL’s Perspective on Storage Efficiency and CO2-SCREEN

Carbon capture and storage (CCS) is a process that captures carbon dioxide (CO2) by separating it from anthropogenic emissions sources before atmospheric release and storing that CO2 in deep geologic reservoirs. CCS is a powerful method for reducing anthropogenic CO2 which can ultimately diminish the effects of climate change. Prospective CO2 storage resource is the amount of carbon dioxide that can be stored in a given geologic formation typically given as a mass (e.g., metric tons). Obtaining accurate estimates of CO2 storage resources is necessary for governments and industries to make energy-related policy decisions. Researchers at the National Energy Technology Laboratory (NETL) under the Department of Energy (DOE) developed a methods and a tool [CO2-SCREEN (Storage prospeCtive Resource Estimation Excel aNalysis) to estimate prospective carbon storage resources for saline formations, unconventional shale formations, and residual oil zones. The methods and tool provide CO2 storage and efficiency outputs in the form of probability estimates (i.e. P10 and P90) as well as partitioning storage and efficiency estimates based on storage mechanism (total, free phase, sorbed phase, and dissolution phase). This presentation will focus on how storage efficiency is calculated based on numerical modeling efforts, how it’s applied in the storage methods and tool, and then highlighting needs for future development.

Hanson, Angela Goodman↗
NASA NTRS1983

CO2 on Titan

A sharp stratospheric emission feature at 667/cm in the Voyager infrared spectra of Titan is associated with the nu2 Q branch of CO2. A coupling of photochemical and radiative-transfer theory yields an average mole fraction above the 110 mbar level of (1.5 + 1.5 or - 0.8) x 10 to the -9th, with most of the uncertainty being due to imprecise knowledge of the vertical distribution. CO2 is found to be in a steady state, with its abundance being regulated principally by the 72 K cold trap near the tropopause and secondarily by the rate at which water-bearing meteoritic material enters the top of the atmosphere. An influx of water about 0.4 times that at the top of the terrestrial atmosphere is consistent with a combination of the observed CO2 abundance and a steady-state CO mole fraction of 0.00011; the thoeretical value for CO is close to the value observed by Lutz et al. (1983), although there are large margins for error in both numbers. If steady-state conditions for CO prevail, little information is available regarding the evolution of Titan's atmosphere.

Samuelson, R. E.↗