Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CLOUDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Estimating the Arctic Cloud-Sea Ice Feedback With Observations during the EOS Period

Arctic sea ice responds to and drives Arctic climate change. The interactions between Arctic sea ice and clouds represent a mechanism through which sea ice can drive climate change. We composite active remote sensing satellite cloud properties for ice-free, marginal ice zone (MIZ), and ice-covered surfaces during MIZ crossing events to investigate the influence of the transition from an ice-covered to an ice-free surface on low-level clouds. We demonstrate that the event-based methodology controls for large-scale meteorological factors and isolates the sea ice effect on clouds. We find larger cloud fraction and total water content below ~1.5 km over ice-free relative to ice-covered surfaces during non-summer months, indicating a low-level cloud sensitivity to Arctic sea ice decline. During summer, results show larger cloud fraction and water content over ice-free surfaces, however the differences are statistically indistinguishable. Evidence is provided that atmospheric thermodynamic profile differences cause the cloud property differences, namely that ice-free footprints are warmer, moister, have more positive surface turbulent fluxes and are less stable than their ice-covered counterparts. Ice-free and ice-covered surface cloud property differences scale with surface temperature differences such that cloud property differences are only found in the presence of a surface temperature difference. We conclude that surface temperature differences modulate the cloud response to sea ice loss through influences on surface turbulent fluxes and lower tropospheric stability. The results imply a positive non-summer sea ice-cloud feedback and that up to a 0.02 cloud fraction and 0.05 g m 3 total water content increase in fall are due to the observed sea ice decline.

Patrick C. Taylor↗

Re-Evaluation of Low Cloud Amount Relationships With Lower-Tropospheric Stability and Estimated Inversion Strength

Lower-tropospheric stability (LTS) and estimated inversion strength (EIS) have a widely accepted relationship with low cloud amount and are key observational foundations for understanding and modeling low-level stratiform clouds. Using the updated surface-based and satellite cloud data, we find that low cloud amount is not as strongly correlated with LTS, and not as sensitive to LTS, as established in the past. EIS does not provide a stronger correlation with low cloud amount than LTS over all eight regions (including the midlatitudes). Further analyzing the relationships between LTS and EIS with different types of low clouds, we find that there is a strong correlation of LTS and EIS with stratocumulus only. This explains the weaker correlation of low cloud fraction (including cumulus, stratocumulus, and stratus) to both LTS and EIS. These results also suggest the need to re-evaluate these relationships in Earth system models. Plain Language Summary: Low-level clouds play an important role in the global radiation budget. Low cloud amount has two established linear relationships with lower-tropospheric stability (LTS) and estimated inversion strength (ETS). These two relationships are re-evaluated here using three separate observational cloud and two reanalysis datasets for three distinct but overlapping time periods. The analysis shows that the strength of the LTS and ETS relationships with low cloud amount varies, depending on the cloud data used. They have a strong relationship with stratocumulus cloud amount only.

Lauren Cutler↗

Clouds in the Arctic Climate System: A Force for Change?

Clouds play a central role in the global climate system through the modulation of Earth’s energy flows and as a mediator of precipitation. In the Arctic, clouds are also a major player; however, the processes that govern cloud evolution in the Arctic differ from most of the other regions of the globe. Thus, clouds are a key “wildcard” within the Arctic climate system that could have a substantial influence on the Arctic climate system response to anthropogenic forcing. What is the role of clouds within the phenomenon known as Arctic Amplification? This is question does not have a clear answer. Clouds seem to be a center to the important processes driving Arctic Amplification (e.g., the atmospheric response to sea ice loss and airmass transformation), however feedback analysis studies indicate that net cloud feedback in the Arctic is small. This seminar discusses the role of clouds within the Arctic Amplification processes reviewing aspects of what we know about Arctic clouds and the uncertainties that limit our ability to model them. Results from recently published and ongoing work are presented that provide an observationally-based estimate of the cloud-sea ice feedback and evaluate cloud properties within models. The goal of this presentation is to ignite a discussion and new collaborations around the best approaches to resolving uncertainties related to the role of clouds with the Arctic system and how to better represent Arctic clouds in models.

Patrick C Taylor↗

Distribution and Radiative Forcing of Tropical Thin Cirrus Clouds

To understand the radiative impact of tropical thin cirrus clouds, the frequency of occurrence and optical depths of these clouds have been derived. Thin cirrus clouds are defined here as being those that are not detected by the operational Moderate Resolution Imaging Spectroradiometer (MODIS) cloud mask, corresponding to an optical depth value of approximately 0.3 or smaller, but that are detectable in terms of the cirrus reflectance product based on the MODIS 1.375-micron channel. With such a definition, thin cirrus clouds were present in more than 40% of the pixels flagged as clear sky by the operational MODIS cloud mask algorithm. It is shown that these thin cirrus clouds are frequently observed in deep convective regions in the western Pacific. Thin cirrus optical depths were derived from the cirrus reflectance product. Regions of significant cloud fraction and large optical depths were observed in the Northern Hemisphere during the boreal spring and summer and moved southward during the boreal autumn and winter. The radiative effects of tropical thin cirrus clouds were studied on the basis of the retrieved cirrus optical depths, the atmospheric profiles derived from the Atmospheric Infrared Sounder (AIRS) observations, and a radiative transfer model in conjunction with a parameterization of ice cloud spectral optical properties. To understand how these clouds regulate the radiation field in the atmosphere, the instantaneous net fluxes at the top of the atmosphere (TOA) and at the surface were calculated. The present study shows positive and negative net forcings at the TOA and at the surface, respectively. The positive (negative) net forcing at the TOA (surface) is due to the dominance of longwave (shortwave) forcing. Both the TOA and surface forcings are in a range of 0-20 W/sq m, depending on the optical depths of thin cirrus clouds.

THIN CIRRUS CLOUDS↗

Development of Two-Moment Cloud Microphysics for Liquid and Ice Within the NASA Goddard Earth Observing System Model (GEOS-5)

This work presents the development of a two-moment cloud microphysics scheme within the version 5 of the NASA Goddard Earth Observing System (GEOS-5). The scheme includes the implementation of a comprehensive stratiform microphysics module, a new cloud coverage scheme that allows ice supersaturation and a new microphysics module embedded within the moist convection parameterization of GEOS-5. Comprehensive physically-based descriptions of ice nucleation, including homogeneous and heterogeneous freezing, and liquid droplet activation are implemented to describe the formation of cloud particles in stratiform clouds and convective cumulus. The effect of preexisting ice crystals on the formation of cirrus clouds is also accounted for. A new parameterization of the subgrid scale vertical velocity distribution accounting for turbulence and gravity wave motion is developed. The implementation of the new microphysics significantly improves the representation of liquid water and ice in GEOS-5. Evaluation of the model shows agreement of the simulated droplet and ice crystal effective and volumetric radius with satellite retrievals and in situ observations. The simulated global distribution of supersaturation is also in agreement with observations. It was found that when using the new microphysics the fraction of condensate that remains as liquid follows a sigmoidal increase with temperature which differs from the linear increase assumed in most models and is in better agreement with available observations. The performance of the new microphysics in reproducing the observed total cloud fraction, longwave and shortwave cloud forcing, and total precipitation is similar to the operational version of GEOS-5 and in agreement with satellite retrievals. However the new microphysics tends to underestimate the coverage of persistent low level stratocumulus. Sensitivity studies showed that the simulated cloud properties are robust to moderate variation in cloud microphysical parameters. However significant sensitivity in ice cloud properties was found to variation in the dispersion of the ice crystal size distribution and the critical size for ice autoconversion. The implementation of the new microphysics leads to a more realistic representation of cloud processes in GEOS-5 and allows the linkage of cloud properties to aerosol emissions.

Aerosol-Cloud Interactions↗

Preconditioning of overcast-to-broken cloud transitions by riming in marine cold air outbreaks

Marine cold air outbreaks (CAOs) commonly form overcast cloud decks that transition into broken cloud fields downwind, dramatically altering the local radiation budget. In this study, we investigate the impact of frozen hydrometeors on these transitions. We focus on a CAO case in the NW Atlantic, the location of the multi-year flight campaign ACTIVATE (Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment). We use MERRA-2 (Modern-Era Retrospective analysis for Research and Applications, version 2) reanalysis fields to drive large eddy simulations with mixed-phase two-moment microphysics in a Lagrangian framework. We find that transitions are triggered by substantial rain (rainwater paths >25 g m−2), and only simulations that allow for aerosol depletion result in sustained breakups, as observed. Using a range of diagnostic ice nucleating particle concentrations, Ninp, we find that increasing ice progressively accelerates transitions, thus abbreviating the overcast state. Ice particles affect the cloud-topped boundary layer evolution, primarily through riming-related processes prior to substantial rain, leading to (1) a reduction in cloud liquid water, (2) early consumption of cloud condensation nuclei, and (3) early and light precipitation cooling and moistening below cloud. We refer to these three effects collectively as “preconditioning by riming”. Greater boundary layer aerosol concentrations available as cloud condensation nuclei (CCN) delay the onset of substantial rain. However, cloud breakup and low CCN concentration final stages are found to be inevitable in this case, due, primarily, to liquid water path buildup. An ice-modulated cloud transition speed suggests the possibility of a negative cloud–climate feedback. To address prevailing uncertainties in the model representation of mixed-phase processes, the magnitude of ice formation and riming impacts and, thereby, the strength of an associated negative cloud–climate feedback process, requires further observational evaluation by targeting riming hot spots with in situ imaging probes that allow for both the characterization of ice particles and abundance of supercooled droplets.

Marine cold air outbreaks↗

Cloud Climate Data Records from Geostationary Satellites to Support CERES: Challenges and Recent Progress

Cloud properties are critical for understanding the Earth’s radiation budget and cloud feedbacks. At NASA Langley Research Center, the Satellite ClOud and Radiative Property retrieval System (SatCORPS) provides real-time and historical analyses of clouds derived from Geostationary satellite (GEOsat) data for weather and climate applications. For the Clouds and the Earth’s Radiant Energy System (CERES) program, the global constellation of GEOsats has been analyzed since 2000 to help characterize and account for the diurnal cycle of clouds and their radiative impacts in the CERES climate data record. Obtaining consistent cloud properties over the GEOsat data record at all times of day during the CERES era is a major objective but a significant challenge considering the diversity of imaging capabilities deployed during that time. A brief overview of the current CERES/GEO cloud property data record constructed from three generations of GEOsat imagers for CERES Edition-4 is presented. In this version, different algorithms were applied to different satellites to take advantage of as much spectral information as possible for each satellite. Under this approach, the derived cloud properties were found to become accurate (and more similar to MODIS) for the GEOsat imagers with more spectral information. However, this approach also led to some discontinuities in cloud properties across platforms. Significant differences were also found between daytime and nighttime cloud properties. This paper will highlight the major issues in the Edition-4 record and discuss new strategies and early results from the next version of the SatCORPS GEOsat cloud property time series in development for CERES Edition-5 with the goal of improving day-night and cross-platform consistency during the CERES record.

clouds↗

Toward Physics-informed Neural Networks for 3D Multi-layer Cloud Mask Reconstruction

Three-dimensional (3D) cloud retrievals are critical for understanding their impact on climate and other applications such as aviation safety, weather prediction, and remote sensing. However, obtaining high-resolution and accurate vertical representation of clouds remains unsolved due to the limitations imposed by satellite instrumentation, viewing conditions, and the complexity of cloud dynamics. Cloud masks are essential for comprehending various cloud vertical properties, but deriving accurate 3D cloud masks from 2D satellite imagery data is a challenging task. To tackle these challenges, we introduce a physics-informed loss function for training deep learning models that can extend 2D cloud images into 3D cloud masks. The proposed loss, called CloudMask Loss, is composed of two domain knowledge-informed loss terms: one for evaluating cloud position and thickness, and the other for measuring the number of layers. By combining these loss terms, we improve the trainability of the deep learning models for more accurate and meaningful results. We apply the proposed loss function to different neural networks and demonstrate significant improvements in multi-layer cloud mask reconstruction. Utilizing the same neural network architecture, our proposed loss outperforms standard binary crossentropy loss in terms of multi-layer cloud classification accuracy, number of layers accuracy, and thickness mean absolute error (MAE). The proposed loss function can be readily integrated into various neural network architectures, resulting in substantial performance gains in 3D cloud mask generation.

multi-layer clouds↗

Surface Radiation Budget (SRB) Release 2.5 Longwave cloud props 3 hourly Data in Native Format (SRB_REL2.5_LW_CLDPROPS_3HRLY)

The Surface Radiation Budget (SRB) data set contain 47 surface and cloud properties including cloud fraction, cloud visible optical depth, cloud top temperature, cloud top pressure, cloud base pressure, and cloud water and ice content for each of 5 cloud types and in total. In addition to these cloud properties, the parameters also include surface pressure, total column ozone, day/night flag, and precipitable water. All perameters were measured at three hourly intervals for each day for the entire globe between 07/01/1983 and 06/30/2005 and serve as inputs to the Global Energy and Water-Cycle Experiment (GEWEX) longwave algorithm (GLW). [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-06-30] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=1 degree; Longitude_Resolution=Ranges from 1 degree (tropics and subtropics) to 120 degrees (the poles).; Temporal_Resolution=3 hourly; Temporal_Resolution_Range=3 hourly].

CLOUD TOP TEMPERATURE↗

Cloud Scattering Impact on Thermal Radiative Transfer and Global Longwave Radiation

The potential importance of longwave (LW) cloud scattering has been recognized but the actual estimate of this effect on thermal radiation varies greatly among different studies. General circulation models (GCMs) generally neglect or simplify the multiple scattering in the LW. In this study, we use a rigorous radiative transfer algorithm to explicitly consider LW multiple-scattering and apply the GCM to quantify the impact of cloud LW scattering on thermal radiation fluxes. Our study shows that the cloud scattering effect on downward thermal radiation at the surface is concentrated in the infrared atmospheric window spectrum (800–1250 cm9exp −1)). The scattering effect on the outgoing longwave radiation (OLR) is also present in the window region over low clouds but it is mainly in the far-infrared spectrum (300–600 cm(exp −1)) over high clouds. For clouds with small to moderate optical depth (τ < 10), the scattering effect on thermal fluxes shows large variation with the cloud τ and has a maximum at an optical depth of ∼3. For opaque clouds, the scattering effect approaches an asymptote and is smaller and less important. The 2-stream radiative transfer scheme could have an error over 10% with an RMS error around 3.5%–4.0% in the calculated LW flux. This algorithm error of the 2-stream approximation could readily exceed the no-scattering error in the LW, and thus it is worthless to include the time-consuming computation of multiple scattering in a 2-stream radiative transfer scheme. However, the calculation error rapidly decreases as stream number increases and the RMS error in LW flux using the 4-stream scheme is under 0.3%, an accuracy sufficient for most climate studies. We implement the 4-stream discrete-ordinate algorithm in the GISS GCM and run the GCM for 20 years with and without the LW scattering effect, respectively. When cloud LW scattering is included, we find that the global annual mean OLR is reduced by 2.7 W/m(exp 2), and the downward surface flux and the net atmospheric absorption are increased by 1.6 W/m2 and 1.8 W/m(exp 2), respectively. Using one year of ISCCP clouds and running the standalone radiative transfer offline, the global annual mean non-scattering errors in OLR, surface LW downward flux and net atmospheric absorption are 3.6 W/m(exp 2), −1.1 W/m(exp 2), and −2.5 W/m(exp 2), respectively. The global scattering impact of 2.7 W/m(exp 2) on the OLR is small when compared to the typical global OLR value of 240 W/m2, but it is significant when compared to cloud LW radiative forcing (30 W/m2) and net cloud forcing (−14 W/m(exp 2)). Overall, the effect of neglecting scattering on the thermal fluxes is comparable to the reported clear sky radiative effect of doubling CO2.

longwave cloud scattering↗

Cloud Detection over Sunglint Regions with Observations from the Earth Polychromatic Imaging Camera (EPIC)

With the ability to observe the entire sunlit side of the Earth, EPIC data have become an important resource for studying cloud daily variability. Inaccurate cloud masking is a great source of uncertainty. One main region that is prone to error in cloud masking is the sunglint area over ocean surfaces. Cloud detection over these regions is challenging for the EPIC instrument because of its limited spectral channels. Clear sky ocean surface reflectance from visible channels over sunglint is much larger than that over the non-glint areas and can exceed reflectance from thin clouds. This paper presents an improved EPIC ocean cloud masking algorithm (Version 3). Over sunglint regions (glint angle ≤ 25°), the algorithm utilizes EPIC’s oxygen (O2) A-band ratio (764nm to 780 nm) in addition to the 780 nm reflectance observations in masking tests. Outside the sunglint regions, a dynamic reflectance threshold for the Rayleigh corrected 780 nm reflectance is applied. The thresholds are derived as a function of glint angle. When compared with co-located data from the geosynchronous Earth orbit (GEO) and the low Earth orbit (LEO) observations, the consistency of the new ocean cloud mask algorithm has increased by 4~10% and 4~6% in the glint center and granule edges respectively. The false positive rate is reduced by 10~17%. Overall global ocean cloud detection consistency increases by 2%. This algorithm, along with other improvements to the EPIC cloud masks, has been implemented in the EPIC cloud products Version 3. This algorithm will improve the cloud daily variability analysis by removing the artificial peak at local noon time in the glint center latitudes and reducing biases in the early morning and late afternoon cloud fraction over ocean surfaces.

EPIC↗

Development of a Consistent Cross-Platform GEO-Satellite Cloud Mask to Support CERES

Geostationary satellites provide continuous cloud and meteorological observations over a fixed portion of the Earth’s surface, allowing them to monitor the movement of storm systems and their diurnal variation. For climate studies, geostationary observations provide valuable insight of cloud formation and evolution and how they influence the Earth’s radiation budget. The Geo-Satellite Edition 4 cloud mask (GEO Ed4) is used operationally in NASA’s Cloud and Earth’s Radiant Energy System (CERES) project to help account for diurnal variations in cloudiness on Earth’s radiation budget. The Ed4 cloud mask was applied to imager data on MSG (MeteoSat Second Generation), Himawari, GOES-West, and GOES-East satellites using as much spectral information as possible. That approach led to some discontinuities when a more modern satellite replaced an older satellite with less spectral information. A different strategy is being investigated for the CERES GEO Ed5 cloud mask that only uses spectral channels common on every satellite. Thus, a 3-channel (0.6, 3.9, 11 µm) algorithm for daytime cloud detection, and a 2-channels (3.9 and 11 µm) algorithm for nighttime cloud detection have been implemented and tested for Ed5. The goal of Ed5 cloud mask is to achieve global cloud amount consistency across five geo-satellites, and a smooth transition from an old satellite to a new satellite over each geo-location. This paper compares cloud mask results between Ed4 and a preliminary Ed5 version over the GOES-East region, using GOES-8, GOES-13, and GOES-16 satellites, each with a different spectral channel complement. Instantaneous and monthly regional mean inter-comparisons are performed and evaluated with CALIPSO cloud products to assess the accuracy and consistency of the Ed5 approach relative to that taken in Ed4. Results will be presented and discussed at the conference.

clouds↗

Boundary-Layer Cloud Modeling Challenges on the North Slope of Alaska

The accurate modeling and prediction of cloud base heights is critical for energy balance calculations and aviation operations, alike. Low-level (i.e., boundary-layer) Arctic clouds can be difficult to model, making prediction of formation and dissipation challenging. Primarily mixed-phase, these clouds typically contain low quantities of supercooled liquid water and often slowly precipitate relatively small amounts of moderately and heavily rimed snow particles. While this appears to be the predominant cloudy state on the North Slope of Alaska (NSA), the delicate balance of microphysical, dynamical, radiative, surface coupling, and advective processes can rapidly shift to heavy snow (with various degrees of riming) or to a complete dissipation of the cloud layer without any precipitation, depending on the dominant processes. Here we strive to disentangle these various processes. First, we compare the predictive performances of four different numerical weather models in forecasting the presence and base-heights of low-level clouds: the High-Resolution Rapid Refresh - Alaska (HRRR-AK) model, the Polar Weather Research and Forecasting (Polar WRF) model, the Unified Model (UM), and the European Centre for Medium-range Weather Forecasting (ECMWF) model. Initial results comparing model output at two U.S. Department of Energy Atmospheric Radiation Measurement (AMT) NSA sites, during the fall season in 2019 and 2022, show that the UM slightly outperforms the HRRR-AK in terms of accurately forecasting the presence of a low-level cloud layer (89% of the time). All models have a significant bias of 300 to 800 meters in forecasting cloud base height (lower than is observed); however, the UM and ECMWF models have the lowest biases. Finally, a case study for a particularly challenging April 2017 thin-cloud event is presented, wherein we compare the performance of four different bulk microphysical parameterization schemes using a higher-resolution large eddy simulation (LES) model, the WRF-LES. Initial results show that the Thompson scheme was the only one able to reproduce and sustain a substantial supercooled liquid layer, but it was unable to reproduce the transition from a deep, liquid-rich cloud to a thin layer with moderately and heavily rimed precipitation. This is the first step in linking simulated LES-scale riming processes with those parameterized at a coarser mesoscale model scale. This has important implications for forecasting low-level clouds in an operational environment, given the efficiency of the riming process.

cloud base heights↗

Infrared radiative transfer through a regular array of cuboidal clouds

Infrared radiative transfer through a regular array of cuboidal clouds is studied and the interaction of the sides of the clouds with each other and the ground is considered. The theory is developed for black clouds and is extended to scattering clouds using a variable azimuth two-stream approximation. It is shown that geometrical considerations often dominate over the microphysical aspects of radiative transfer through the clouds. For example, the difference in simulated 10 micron brightness temperature between black isothermal cubic clouds and cubic clouds of optical depth 10, is less than 2 deg for zenith angles less than 50 deg for all cloud fractions when viewed parallel to the array. The results show that serious errors are made in flux and cooling rate computations if broken clouds are modeled as planiform. Radiances computed by the usual practice of area-weighting cloudy and clear sky radiances are in error by 2 to 8 K in brightness temperature for cubic clouds over a wide range of cloud fractions and zenith angles. It is also shown that the lapse rate does not markedly affect the exiting radiances for cuboidal clouds of unit aspect ratio and optical depth 10.

HARSHVARDHAN↗

Size-density relations in dark clouds: Non-LTE effects

One of the major goals of molecular astronomy has been to understand the physics and dynamics of dense interstellar clouds. Because the interpretation of observations of giant molecular clouds is complicated by their very complex structure and the dynamical effects of star formation, a number of studies have concentrated on dark clouds. Leung, Kutner and Mead (1982) (hereafter LKM) and Myers (1983), in studies of CO and NH3 emission, concluded that dark clouds exhibit significant correlations between linewidth and cloud radius of the form delta v varies as R(0.5) and between mean density and radius of the form n varies as R(-1), as originally suggested by Larson (1981). This result suggests that these objects are in virial equilibrium. However, the mean densities inferred from the CO data of LKM are based on an local thermodynamic equilibrium (LTE) analysis of their 13CO data. At the very low mean densities inferred by LKM for the larger clouds in their samples, the assumption of LTE becomes very questionable. As most of the range in R in the density-size correlation comes from the clouds observed in CO, it seems worthwhile to examine how non-LTE effects will influence the derived densities. One way to assess the validity of LTE-derived densities is to construct cloud models and then to interpret them in the same way as the observed data. Microturbulent models of inhomogeneous clouds of varying central concentration with the linewidth-size and mean density-size relations found by Myers show sub-thermal excitation of the 13CO line in the larger clouds, with the result that LTE analysis considerbly underestimates the actual column density. A more general approach which doesn't require detailed modeling of the clouds is to consider whether the observed T sub R*(13CO)/T sub R*(12CO) ratios in the clouds studied by LKM are in the range where the LTE-derived optical depths (and hence column densities) can be seriously in error due to sub-thermal excitation of the 13CO molecule.

Maloney, P.↗

Aerosols in polluted versus nonpolluted air masses Long-range transport and effects on clouds

To assess the influence of anthropogenic aerosols on the physics and chemistry of clouds in the northeastern United States, aerosol and cloud-drop size distributions, elemental composition of aerosols as a function of size, and ionic content of cloud water were measured on Whiteface Mountain, NY, during the summers of 1981 and 1982. In several case studies, the data were cross-correlated with different air mass types - background continental, polluted continental, and maritime - that were advected to the sampling site. The results are the following: (1) Anthropogenic sources hundreds of kilometers upwind cause the small-particle (accumulation) mode number to increase from hundreds of thousands per cubic centimeter and the mass loading to increase from a few to several tens of micrograms per cubic meter, mostly in the form of sulfur aerosols. (2) A significant fraction of anthropogenic sulfur appears to act as cloud condensation nuclei (CCN) to affect the cloud drop concentration. (3) Clouds in Atlantic maritime air masses have cloud drop spectra that are markedly different from those measured in continental clouds. The drop concentration is significantly lower, and the drop size spectra are heavily skewed toward large drops. (4) Effects of anthropogenic pollutants on cloud water ionic composition are an increase of nitrate by a factor of 50, an increase of sulfate by more than one order of magnitude, and an increase of ammonium ion by a factor of 7. The net effect of the changes in ionic concentrations is an increase in cloud water acidity. An anion deficit even in maritime clouds suggests an unknown, possibly biogenic, source that could be responsible for a pH below neutral, which is frequently observed in nonpolluted clouds.

Pueschel, R. F.↗

The effect of subpixel clouds on remote sensing

A method for estimating the cloud effect on remote sensing is described, and it is applied to cloudiness in several climatological conditions. The algorithm is based on the Haurwitz (1948) measurements of the cloud layer transmission of solar radiation for an overcast sky and on an empirical interpolation of data for broken cloudiness by Pochop et al. (1968). Radiances for a sunny area observed directly from space and through a cloud, and for a shady area observed from space and through a cloud are computed. Methods for detecting the cloud effect from satellite images are discussed. The relation between cloud reflectance and cloud size is studied. It is observed that the subpixel clouds affect the detected radiance and vegetation index, and the effect depends on the cloud types and the dependence of the cloud transmissivity on cloud fraction. Procedures for decreasing or eliminating cloud effect are examined.

Kaufman, Yoram J.↗

Cloud microphysics of the giant planets

The characteristic time constants for the atmospheres of the giant planets were compared for the purpose of finding analogs for clouds in the atmospheres of these planets among the several types of cloud systems found on earth. The NH3 clouds on Jupiter and Saturn were found to be weakly precipitating systems, similar to the thicker cirrus clouds on earth, while the H2O clouds were found to be much more massive than the water clouds on earth. The CH4 and H2O clouds on Uranus and Neptune are completely unlike any cloud on earth, being 10 to 100 times more massive than the densest water clouds on earth. It is concluded that, while the microphysical characteristics of the clouds on Jupiter and Saturn are comparable to those of terrestrial stratus and cumulus clouds, the massive clouds on Uranus and Neptune reach conditions unlike anything on earth.

Carlson, Barbara E.↗