Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CIRCUIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Power system with an integrated lubrication circuit

A power system includes an engine having a first lubrication circuit and at least one auxiliary power unit having a second lubrication circuit. The first lubrication circuit is in fluid communication with the second lubrication circuit.

42 ENGINEERING↗

Short Circuit Analysis of Induction Machines Wind Power Application

he short circuit behavior of Type I (fixed speed) wind turbine-generators is analyzed in this paper to aid in the protection coordination of wind plants of this type. A simple network consisting of one wind turbine-generator is analyzed for two network faults: a three phase short circuit and a phase A to ground fault. Electromagnetic transient simulations and sequence network calculations are compared for the two fault scenarios. It is found that traditional sequence network calculations give accurate results for the short circuit currents in the balanced fault case, but are inaccurate for the un-faulted phases in the unbalanced fault case. The time-current behavior of the fundamental frequency component of the short circuit currents for both fault cases are described, and found to differ significantly in the unbalanced and balanced fault cases

17 WIND ENERGY↗

Junction Temperature Measurement of IGBTs Using Short Circuit Current

In this paper, a method is proposed to measure the junction temperatures of IGBT discrete devices and modules using short circuit current. Experimental results show that the short circuit current has good sensitivity, linearity and selectivity, which is suitable to be used as temperature sensitive electrical parameters (TSEP). Test circuit and hardware design are proposed for junction temperature measurement in single phase and three phase convertes. By connecting a temperature measurement unit to the converter and giving a short circuit pulse, the IGBT junction temperature can be measured.

Wang, Fei↗

Fast frequency divider circuit using combinational logic

The various technologies presented herein relate to performing on-chip frequency division of an operating frequency of a ring oscillator (RO). Per the various embodiments herein, a conflict between RO size versus operational frequency can be addressed by dividing the output frequency of the RO to a frequency that can be measured on-chip. A frequency divider circuit (comprising NOR gates and latches, for example) can be utilized in conjunction with the RO on the chip. In an embodiment, the frequency divider circuit can include a pair of latches coupled to the RO to facilitate dividing the oscillating frequency of the RO by 2. In another embodiment, the frequency divider circuit can include four latches (operating in pairs) coupled to the RO to facilitate dividing the oscillating frequency of the RO by 4. A plurality of ROs can be MUXed to the plurality of ROs by a single oscillation-counting circuit.

47 OTHER INSTRUMENTATION↗

Gm-C filter and multi-phase clock circuit

Described herein is a power-efficient Gm-C filter, wherein the Gm-C filter includes several operational transconductance amplifiers (OTAs). In an example, at least two of the OTAs share a common bias current. Further, output of one of the OTAs is used to bias another one of the OTAs. Also described herein is a power-efficient clock generator circuit that is configured to output non-overlapping clock signals. The clock generator circuit includes a ring oscillator circuit, which includes several inverter stages. The clock generator circuit is well-suited for controlling operation of switches.

42 ENGINEERING↗

Time-mode analog computation circuits and methods

A time-mode analog computation circuit is provided. The time-mode analog computation circuit includes one or more inputs for receiving one or more temporal input signals. The time-mode analog computation circuit further includes circuitry for performing a mathematical operation based on the one or more temporal input signals. A result of the mathematical operation is expressed in a timing of an output signal generated by the circuit.

Ravinuthula, Vishnu V.↗

Integrated heat pump and water heating circuit

An integrated heat pump and water heating circuit for space heating and cooling and heating domestic water. The circuit includes a first heat exchanger for the domestic water, a second heat exchanger for the source, a third exchanger for the space, and a variable capacity compressor. The circuit has four modes of operation. In the first mode, the space is cooled. In the second mode, the space is heated. In the third mode, the circuit heats the water supply. In a fourth mode, the water supply is heated and the space is cooled simultaneously. The speed of the compressor is adjusted to maintain a pressure differential at or above a predetermined set point.

Hern, Shawn A.↗

Input-output processing on a remote integrated circuit chip

An electronic device includes a first integrated circuit chip including a processing functional block, and a second integrated circuit chip including an input-output (IO) functional block. The IO functional block performs one or more IO processing operations on behalf of the processing functional block in the first integrated circuit chip. The first integrated circuit chip lacks at least some elements of the IO functional block, so that the processing functional block is unable to perform corresponding IO operations without the IO functional block.

42 ENGINEERING↗

Discrete time analog front end circuit implemented in a receiver device

A device can comprise a peaked integrator circuit that generates an output signal from a continuous time signal based on a sub rate clock timing cycle. The device can further comprise a track and hold circuit coupled to the output of the peaked integrator that generates a held discrete time signal from the output of the peaked integrator based on a second sub rate clock timing cycle that is offset in time from the sub rate clock timing cycle by a single time unit interval. The device can further comprise an integrator circuit coupled to an output of the track and hold circuit that integrates the held discrete time signal, based on the second sub rate clock timing cycle that is offset in time from the sub rate clock timing cycle by a single time unit interval.

42 ENGINEERING↗

Equivalent Circuit for Mechanical-Motion-Rectifier-Based Power Take-off in Wave Energy Harvesting

While a new type of power take-off (PTO) based on mechanical-motion-rectifier has been developed, its dynamic model is over simplified and cannot properly predict its nonlinear system characteristics. There is a need to develop a high fidelity PTO model to predict the system dynamics. An equivalent circuit would be a convenient tool to model the system behaviour and can easily apply to a circuit-based wave-to-wire (W2W) model. In this paper, a methodology for deriving a circuit-based high-fidelity model through the PTO design is introduced following by the extraction of the parameters through experimental results. Finally, the PTO circuit model is validated by the bench test results under the time domain

16 TIDAL AND WAVE POWER↗

Smart dim fuse: electrical load flexibility controller using sub-circuit voltage modulation and load sensing

Improved control of electrical power consumption is provided with “Smart Dim Fuses” (SDF) which can alter their output voltage as provided to the load circuits they are connected to. SDF units can replace conventional circuit breakers in electrical panels. The voltage control capability provided by SDF units can lead to improved control of electrical power consumption, since many loads can smoothly operate at lower power consumption when the voltage they are driven with decreases. SDF units can comply with relevant safety requirements, such as uninterrupted neutral connections between electrical mains and load circuits. SDF units can also provide a current limiting function that can substitute for the protective action of conventional circuit breakers.

Goldin, Aaron↗

Offset-aligned three-dimensional integrated circuit

A method for manufacturing a three-dimensional integrated circuit includes attaching a first side of a first die to a first carrier wafer. The method includes preparing a second side of the first die to generate a prepared second side of the first die. The method includes attaching the prepared second side of the first die to a second carrier wafer. The method includes removing the first carrier wafer from the first side of the first die to form a transitional three-dimensional integrated circuit. The method includes attaching a third carrier wafer to a first side of the transitional three-dimensional integrated circuit. The method includes attaching a first side of the second die to a second side of the transitional three-dimensional integrated circuit.

97 MATHEMATICS AND COMPUTING↗

Power Converter Circuit Design Automation using Parallel Monte Carlo Tree Search

The tidal waves of modern electronic/electrical devices have led to increasing demands for ubiquitous application-specific power converters. A conventional manual design procedure of such power converters is computation- and labor-intensive, which involves selecting and connecting component devices, tuning component-wise parameters and control schemes, and iteratively evaluating and optimizing the design. To automate and speed up this design process, we propose an automatic framework that designs custom power converters from design specifications using Monte Carlo Tree Search. Specifically, the framework embraces the upper-confidence-bound-tree (UCT), a variant of Monte Carlo Tree Search, to automate topology space exploration with circuit design specification-encoded reward signals. Moreover, our UCT-based approach can exploit small offline data via the specially designed default policy and can run in parallel to accelerate topology space exploration. Further, it utilizes a hybrid circuit evaluation strategy to substantially reduce design evaluation costs. Empirically, we demonstrated that our framework could generate energy-efficient circuit topologies for various target voltage conversion ratios. Compared to existing automatic topology optimization strategies, the proposed method is much more computationally efficient --- the sequential version can generate topologies with the same quality while being up to 67% faster. Here, the parallelization schemes can further achieve high speedups compared to the sequential version.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Mode connectivity in the loss landscape of parameterized quantum circuits

Variational training of parameterized quantum circuits (PQCs) underpins many workflows employed on near-term noisy intermediate scale quantum (NISQ) devices. It is a hybrid quantum-classical approach that minimizes an associated cost function in order to train a parameterized ansatz. In this work we adapt the qualitative loss landscape characterization for neural networks introduced in Goodfellow et al. (2014); Li et al. (2017) and tests for connectivity used in Draxler et al. (2018) to study the loss landscape features in PQC training. We present results for PQCs trained on a simple regression task, using the bilayer circuit ansatz, which consists of alternating layers of parameterized rotation gates and entangling gates. Multiple circuits are trained with 3 different batch gradient optimizers: stochastic gradient descent, the quantum natural gradient, and Adam. We identify large features in the landscape that can lead to faster convergence in training workflows.

97 MATHEMATICS AND COMPUTING↗

Asymptotic geometric phase and purity for phase qubit dispersively coupled to lossy LC circuit

Analytical descriptions of the geometric phases (GPs) for the total system and subsystems are studied for a current biased Josephson phase qubit strongly coupled to a lossy LC circuit in the dispersive limit. It is found that, the GP and purity depend on the damping parameter which leads to the phenomenon of GP death. Coherence parameter delays the phenomenon of a regular sequence of deaths and births of the GP. The asymptotic behavior of the GP and the purity for the qubit-LC resonator state closely follow that for the qubit state, but however, for the LC circuit these asymptotic values are equal to zero. - Highlights: > The model of a current biased Josephson phase qubit, strongly coupled to loss LC circuit, is considered. > Analytical descriptions of the geometric phase (GP) of this model, in the dispersive limit, are studied. > The GP and purity depend on the dissipation which leads to the GP death phenomenon. > Coherence parameter delays the phenomenon of a regular sequence of deaths and births of the GP.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Implementing phase-covariant cloning in circuit quantum electrodynamics

An efficient scheme is proposed to implement phase-covariant quantum cloning by using a superconducting transmon qubit coupled to a microwave cavity resonator in the strong dispersive limit of circuit quantum electrodynamics (QED). By solving the master equation numerically, we plot the Wigner function and Poisson distribution of the cavity mode after each operation in the cloning transformation sequence according to two logic circuits proposed. The visualizations of the quasi-probability distribution in phase-space for the cavity mode and the occupation probability distribution in the Fock basis enable us to penetrate the evolution process of cavity mode during the phase-covariant cloning (PCC) transformation. With the help of numerical simulation method, we find out that the present cloning machine is not the isotropic model because its output fidelity depends on the polar angle and the azimuthal angle of the initial input state on the Bloch sphere. The fidelity for the actual output clone of the present scheme is slightly smaller than one in the theoretical case. The simulation results are consistent with the theoretical ones. This further corroborates our scheme based on circuit QED can implement efficiently PCC transformation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Recycling-oriented characterization of plastic frames and printed circuit boards from mobile phones by electronic and chemical imaging

Highlights: • A recycling oriented characterization of end-of-life mobile phones was carried out. • Characterization was developed in a zero-waste-perspective, aiming to recover all the mobile phone materials. • Plastic frames and printed circuit boards were analyzed by electronic and chemical imaging. • Suitable milling/classification strategies were set up to define specialized-pre-concentrated-streams. • The proposed approach can improve the recovery of polymers, base/precious metals, rare earths and critical raw materials. - Abstract: This study characterizes the composition of plastic frames and printed circuit boards from end-of-life mobile phones. This knowledge may help define an optimal processing strategy for using these items as potential raw materials. Correct handling of such a waste is essential for its further “sustainable” recovery, especially to maximize the extraction of base, rare and precious metals, minimizing the environmental impact of the entire process chain. A combination of electronic and chemical imaging techniques was thus examined, applied and critically evaluated in order to optimize the processing, through the identification and the topological assessment of the materials of interest and their quantitative distribution. To reach this goal, end-of-life mobile phone derived wastes have been systematically characterized adopting both “traditional” (e.g. scanning electronic microscopy combined with microanalysis and Raman spectroscopy) and innovative (e.g. hyperspectral imaging in short wave infrared field) techniques, with reference to frames and printed circuit boards. Results showed as the combination of both the approaches (i.e. traditional and classical) could dramatically improve recycling strategies set up, as well as final products recovery.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗