Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

E85 Optimized Engine through Boosting, Spray-Optimized DIG, VCR and Variable Valvetrain

The use of biofuels for internal combustion engines has several well published advantages. The biofuels, made from biological sources such as corn or sugar cane, are renewable resources that reduce the dependence on fossil fuels. Fuels from agricultural sources can therefore reduce a countries energy dependency on other nations. Biofuels also have been shown to reduce CO2 emissions into the atmosphere compared to traditional fossil based fuels. Because of these benefits several countries have set targets for the use of biofuels, especially ethanol, in their transportation fuels. Small percentages of ethanol are common place in gasoline but are typically limited to 5 to 8% by volume. Greater benefits are possible from higher concentrations and some countries such as the US and Sweden have encouraged the production of vehicles capable of operating on E85 (85% denatured ethanol and 15% gasoline). E85 capable vehicles are normally equipped to run the higher levels of ethanol by employing modified fuel delivery systems that can withstand the highly corrosive nature of the alcohol. These vehicles are not however equipped to take full advantage of ethanol's properties during the combustion process. Ethanol has a much higher blend research octane number than gasoline. This allows the use of higher engine compression ratios and spark advance which result in more efficient engine operation. Ethanol's latent heat of vaporization is also much higher that gasoline. This higher heat of vaporization cools the engine intake charge which also allows the engine compression ratio to be increased even further. An engine that is optimized for operation on high concentrations of ethanol therefore will have compression ratios that are too high to avoid spark knock (pre-ignition) if run on gasoline or a gasoline/ethanol blend that has a low percentage alcohol. An engine was developed during this project to leverage the improved evaporative cooling and high octane of E85 to improve fuel economy and offset E85's lower energy content. A 2.0 L production Direct Injection gasoline, (DIg) engine employing Dual Independent Cam Phasing, (DICP) and turbo charging was used as the base engine. Modified pistons were used to increase the geometric compression ratio from 9.2:1 to 11.85:1 by modifying the pistons and adding advanced valvetrain to proved control of displacement and effective compression ratio through valve timing control. The advanced valvetrain utilized Delphi's two step valvetrain hardware and intake cam phaser with increased phasing authority of 80 crank angle degrees. Using this hardware the engine was capable of operating knock free on all fuels tested from E0-E85 by controlling effective compression ratio using a Late Intake Valve Closing, (LIVC) strategy. The LIVC strategy results in changes in the trapped displacement such that knock limited torque for gasoline is significantly lower than E85. The use of spark retard to control knock enables higher peak torque for knock limited fuels, however a loss in efficiency results. For gasoline and E10 fuels, full effective displacement could not be reached before spark retard produced a net loss in torque. The use of an Early Intake Valve Closing, (EIVC) strategy resulted in an improvement of engine efficiency at low to mid loads for all fuels tested from E0- E85. Further the use of valve deactivation, to a single intake valve, improved combustion stability and enabled throttle-less operation down to less than 2 bar BMEP. Slight throttling to trap internal residual provided additional reductions in fuel consumption. To fully leverage the benefits of E85, or ethanol blends above E10, would require a vehicle level approach that would take advantage of the improved low end torque that is possible with E85. Operating the engine at reduced speeds and using advanced transmissions (6 speeds or higher) would provide a responsive efficient driving experience to the customer. The vehicle shift and torque converter lockup points for high ethanol blends could take advantage of the significant efficiency advantage of down-speeding and operating at higher loads to deliver the required power.

02 PETROLEUM↗

Continuous Dynamic Grid Adaptation In A Global Atmospheric Model: Application And Refinement (Scientific Final Report)

This project had goals of advancing the performance capabilities of the numerical general circulation model EULAG and using it to produce a fully operational atmospheric global climate model (AGCM) that can employ either static or dynamic grid stretching for targeted phenomena. The resulting AGCM combined EULAG's advanced dynamics core with the 'physics' of the NCAR Community Atmospheric Model (CAM). Effort discussed below shows how we improved model performance and tested both EULAG and the coupled CAM-EULAG in several ways to demonstrate the grid stretching and ability to simulate very well a wide range of scales, that is, multi-scale capability. We leveraged our effort through interaction with an international EULAG community that has collectively developed new features and applications of EULAG, which we exploited for our own work summarized here. Overall, the work contributed to over 40 peer-reviewed publications and over 70 conference/workshop/seminar presentations, many of them invited.

54 ENVIRONMENTAL SCIENCES↗

Collaborative Research: Continuous Dynamic Grid Adaptation in a Global Atmospheric Model: Application and Refinement [Scientific Final Report]

This project had goals of advancing the performance capabilities of the numerical general circulation model EULAG and using it to produce a fully operational atmospheric global climate model (AGCM) that can employ either static or dynamic grid stretching for targeted phenomena. The resulting AGCM combined EULAG's advanced dynamics core with the physics of the NCAR Community Atmospheric Model (CAM). Effort discussed below shows how we improved model performance and tested both EULAG and the coupled CAM-EULAG in several ways to demonstrate the grid stretching and ability to simulate very well a wide range of scales, that is, multi-scale capability. We leveraged our effort through interaction with an international EULAG community that has collectively developed new features and applications of EULAG, which we exploited for our own work summarized here. Overall, the work contributed to over 40 peer- reviewed publications and over 70 conference/workshop/seminar presentations, many of them invited.

54 ENVIRONMENTAL SCIENCES↗

Optimally Controlled Flexible Fuel Powertrain System

A multi phase program was undertaken with the stated goal of using advanced design and development tools to create a unique combination of existing technologies to create a powertrain system specification that allowed minimal increase of volumetric fuel consumption when operating on E85 relative to gasoline. Although on an energy basis gasoline / ethanol blends typically return similar fuel economy to straight gasoline, because of its lower energy density (gasoline ~ 31.8MJ/l and ethanol ~ 21.1MJ/l) the volume based fuel economy of gasoline / ethanol blends are typically considerably worse. This project was able to define an initial engine specification envelope, develop specific hardware for the application, and test that hardware in both single and multi-cylinder test engines to verify the ability of the specified powertrain to deliver reduced E85 fuel consumption. Finally, the results from the engine testing were used in a vehicle drive cycle analysis tool to define a final vehicle level fuel economy result. During the course of the project, it was identified that the technologies utilized to improve fuel economy on E85 also enabled improved fuel economy when operating on gasoline. However, the E85 fueled powertrain provided improved vehicle performance when compared to the gasoline fueled powertrain due to the improved high load performance of the E85 fuel. Relative to the baseline comparator engine and considering current market fuels, the volumetric fuel consumption penalty when running on E85 with the fully optimized project powertrain specification was reduced significantly. This result shows that alternative fuels can be utilized in high percentages while maintaining or improving vehicle performance and with minimal or positive impact on total cost of ownership to the end consumer. The justification for this project was two-fold. In order to reduce the US dependence on crude oil, much of which is imported, the US Environmental Protection Agency (EPA) developed the Renewable Fuels Standard (RFS) under the Energy Policy Act of 2005. The RFS specifies targets for the amount of renewable fuel to be blended into petroleum based transportation fuels. The goal is to blend 36 billion gallons of renewable fuels into transportation fuels by 2022 (9 billion gallons were blended in 2008). The RFS also requires that the renewable fuels emit fewer greenhouse gasses than the petroleum fuels replaced. Thus the goal of the EPA is to have a more fuel efficient national fleet, less dependent on petroleum based fuels. The limit to the implementation of certain technologies employed was the requirement to run the developed powertrain on gasoline with minimal performance degradation. The addition of ethanol to gasoline fuels improves the fuels octane rating and increases the fuels evaporative cooling. Both of these fuel property enhancements make gasoline / ethanol blends more suitable than straight gasoline for use in downsized engines or engines with increased compression ratio. The use of engine downsizing and high compression ratios as well as direct injection (DI), dual independent cam phasing, external EGR, and downspeeding were fundamental to the fuel economy improvements targeted in this project. The developed powertrain specification utilized the MAHLE DI3 gasoline downsizing research engine. It was a turbocharged, intercooled, DI engine with dual independent cam phasing utilizing a compression ratio of 11.25 : 1 and a 15% reduction in final drive ratio. When compared to a gasoline fuelled 2.2L Ecotec engine in a Chevrolet HHR, vehicle drive cycle predictions indicate that the optimized powertrain operating on E85 would result in a reduced volume based drive cycle fuel economy penalty of 6% compared to an approximately 30% penalty for current technology engines.

33 ADVANCED PROPULSION SYSTEMS↗

Development of a Low Input and sustainable Switchgrass Feedstock Production System Utilizing Beneficial Bacterial Endophytes

Switchgrass represents a promising feedstock crop for US energy sustainability. However, its broad utilization for bioenergy requires improvements of biomass yields and stress tolerance. In this DOE funded project, we have been working on harnessing beneficial bacterial endophytes to enhance switchgrass performance and to develop a low input feedstock production system for marginal lands that do not compete with the production of food crops. We have demonstrated that one of most promising plant growth-promoting bacterial endophytes, Burkholderia phytofirmans strain PsJN, is able to colonize roots and significantly promote growth of switchgrass cv. Alamo under in vitro, growth chamber, greenhouse, as well as field conditions. Furthermore, PsJN bacterization improved growth and development of switchgrass seedlings, significantly stimulated plant root and shoot growth, and tiller number in the field, and enhanced biomass accumulation on both poor (p<0.001) and rich (p<0.05) soils, with more effective stimulation of plant growth in low fertility soil. Plant physiology measurements showed that PsJN inoculated Alamo had consistently lower transpiration, lower stomatal conductance, and higher water use efficiency in greenhouse conditions. These physiological changes may significantly contribute to the recorded growth enhancement. PsJN inoculation rapidly results in an increase in photosynthetic rates which contributes to the advanced growth and development. Some evidence suggests that this initial growth advantage decreases with time when resources are not limited such as in greenhouse studies. Additionally, better drought resistance and drought hardening were observed in PsJN inoculated switchgrass. Using the DOE-funded switchgrass EST microarray, in a collaboration with the Genomics Core Facility at the Noble Foundation, we have determined gene expression profile changes in both responsive switchgrass cv. Alamo and non-responsive cv. Cave-in-Rock (CR) following PsJN bacterization. With the MapMan software to analyze microarray data, the number of up- and down-regulated probes was calculated. The number of up-regulated probes in Alamo was 26, 14, 14, and 12% at 0.5, 2, 4 and 8 days after inoculation (DAI) with PsJN, respectively while the corresponding number in CR was 24, 22, 21, and 19%, respectively. In both cultivars, the largest number of up-regulated probes occurred at 0.5 DAI. Noticeable differences throughout the timeframe between Alamo and CR were that the number was dramatically decreased to half (12%) in Alamo but remained high in CR (approximately 20%). The number of down regulated genes demonstrated different trends in Alamo and CR. Alamo had an increasing trend from 9% at 0.5 DAI to 11, 17, and 28% at 2, 4, and 8 DAI, respectively. However, CR had 13% at 0.5 and 2 DAI, and declined to 10% at 4 and 8 DAI. With the aid of MapMan and PageMan, we mapped the response of the ID probes to the observed major gene regulatory network and major biosynthetic pathway changes associated with the beneficial bacterial endophyte infection, colonization, and early growth promotion process. We found significant differences in gene expression patterns between responsive and non-responsive cultivars in many pathways, including redox state regulation, signaling, proteolysis, transcription factors, as well as hormone (SA and JA in particular)-associated pathways. Form microarray data, a total of 50 key genes have been verified using qPCR. Ten of these genes were chosen for further functional study via either overexpression and/or RNAi knockout technologies. These genes were calmodulin-related calcium sensor protein (CAM), glutathione S-transferase (GST), histidine-containing phosphotransfer protein (H-221), 3 different zinc finger proteins (ZF-371, ZF131 and ZF242), EF hand transcription factor (EF-622), peroxidase, cellulose synthase catalytic submit A2 (CESA2), and Aux/IAA family. A total of 8 overexpression and 5 RNAi transgenic plants have been regenerated, and their gene expression levels determined using qPCR. Consequently high, medium and low expression lines were propagated in vitro for gene function study. When adequate numbers of individual transgenic lines were obtained, they were challenged with PsJN to see if PsJN promotes or inhibits growth of transgenic plants. Our results demonstrated that EF-622 overexpression, ZF-371, GST, H-221 and CAM RNAi transgenic lines lost responses to PsJN, i.e. PsJN had no growth promotive effects on these transgenic plants. Further study needs to be done to characterize this loss of responsiveness to PsJN. During this funding period, we have done more work related to this funded project and established collaborations with other institutions and obtained some interesting results, building a foundation for further research projects. For example, we isolated a naturally-occurring bacterium from surface-sterilized switchgrass seeds, identified as a unique Panteoa agglomerans species, and named strain PaKM. PaKM has been proved to be an efficient growth promoter of switchgrass over a broad spectrum of genotypes and has potential in applications with low input and sustainable production systems on marginal lands. In collaboration with Dr. Shuijin Hu (North Carolina State University), we conducted experiments on how endophyte-inoculated switchgrass affects soil N and P availability and the number of AMF in roots. Our preliminary results showed that PsJN increased AMF infection of switchgrass roots, and enhanced soil N availability and soil N mineralization on a low nutrient field. Further study of this phenomenon on different soils, over longer time periods, is needed to assess its potential impact on the productivity and longevity of switchgrass stands.

09 BIOMASS FUELS↗

A Petascale Non-Hydrostatic Atmospheric Dynamical Core in the HOMME Framework

The High-Order Method Modeling Environment (HOMME) is a framework for building scalable, conserva- tive atmospheric models for climate simulation and general atmospheric-modeling applications. Its spatial discretizations are based on Spectral-Element (SE) and Discontinuous Galerkin (DG) methods. These are local methods employing high-order accurate spectral basis-functions that have been shown to perform well on massively parallel supercomputers at any resolution and scale particularly well at high resolutions. HOMME provides the framework upon which the CAM-SE community atmosphere model dynamical-core is constructed. In its current incarnation, CAM-SE employs the hydrostatic primitive-equations (PE) of motion, which limits its resolution to simulations coarser than 0.1 per grid cell. The primary objective of this project is to remove this resolution limitation by providing HOMME with the capabilities needed to build nonhydrostatic models that solve the compressible Euler/Navier-Stokes equations.

58 GEOSCIENCES↗

The impact of short-term stochastic variability in solar irradiance on optimal microgrid design

This paper proposes a new methodology to capture the impact of fast moving clouds on utility power demand charges observed in microgrids with photovoltaic (PV) arrays, generators, and electrochemical energy storage. It consists of a statistical approach to introduce sub-hourly events in the hourly economic accounting process. The methodology is implemented in the Distributed Energy Resources Customer Adoption Model (DER-CAM), a state of the art mixed integer linear model used to optimally size DER in decentralized energy systems. Results suggest that previous iterations of DER-CAM could undersize battery capacities. The improved model depicts more accurately the economic value of PV as well as the synergistic benefits of pairing PV with storage.

24 POWER TRANSMISSION AND DISTRIBUTION↗

New Perspectives on Acetate and One-Carbon Metabolism in the Methanoarchaea

Carbonic anhydrases catalyze the reversible hydration of carbon dioxide to bicarbonate. Although widespread in prokaryotes of the domains Bacteria and Archaea, few have been investigated and the physiological functions are largely unknown. Carbonic anhydrases are of biotechnological interest for carbon dioxide capture and sequestration at point sources. Prokaryotes encode three independently evolved classes. The alpha-class is restricted to a few pathogens and the other two are uniformly distributed in phylogenetically and physiologically diverse species. Although wide-spread in prokaryotes, only three gamma-class enzymes have been biochemically characterized and the physiological functions have not been investigated. The gamma-class is prominent in anaerobic acetate-utilizing methane-producing species of the genus Methanosarcina that encode three subclasses. Enzymes from two of the subclasses, Cam and CamH from Methanosarcina thermophila, have been characterized and found to utilize iron in the active site which is the first example of an iron-containing carbonic anhydrase. No representative of the third subclass has been isolated, although this subclass constitutes the great majority of the β-class. This grant application proposed to characterize gamma-class carbonic anhydrases from diverse anaerobic prokaryotes from the domains Bacteria and Archaea to broaden the understanding of this enzyme. In particular, the three subclasses present the genetically tractable acetate-utilizing methanogen Methanosarcina acetivorans will be investigated to extend studies of acetate and one-carbon metabolism in this species. A genetic approach will be taken to ascertain the physiological functions. It is also proposed to delve deeper into the mechanism of Cam from M. thermophila, the archetype of the gamma-class, via a high resolution neutron structure and kinetic analysis of site-specific amino acid replacement variants. In the course of the investigation, goals were added to take advantage of discoveries on enzymes responding to oxidative stress.

59 BASIC BIOLOGICAL SCIENCES↗

Observations Regarding Face Shield Designs Using Commonly Available Materials

A Sandia COVID-19 LDRD effort, the Sandia E-PiPEline Team, systematically evaluated design options for face shields constructed from commonly available materials (CAMs). This study is not focused on face shields for medical applications, and as such, has excluded labeling and flammability considerations suggested by the FDA. Design options for face shields were analyzed with subject matter expert input considering the design's effectiveness (seal around face), reusability (compatibility with solvents, degree of inertness), producibility (ability to obtain materials, build time), cost, and comfort (fit around head, contact surface interface). Observations for the design of face shields using CAMS are provided here.

59 BASIC BIOLOGICAL SCIENCES↗

Observations Regarding Face Covering Designs Using Commonly Available Materials

The Center for Disease Control has recommended that the public should wear cloth face coverings in public settings'. A Sandia COVID-19 LDRD effort, the Sandia E-PiPEline Team, systematically evaluated design options for face coverings constructed from commonly available materials (CAMS). The design options were analyzed with subject matter expert input considering the design's effectiveness (metric fiber density, material construction, and water saturation), reusability (degree of inertness), producibility (ability to obtain materials, build time), cost, and comfort (fit on face, breathability). Observations for the design of face coverings using CAMs are provided here.

59 BASIC BIOLOGICAL SCIENCES↗

Wood-to-Fuel for California's Transportation Sector using Autothermal Pyrolysis (Progress Report)

In the month of May, we planned to have the Site License Agreement with SPI signed and fully executed, make further progress on the market assessment for the Wood-to-Bio-oil Market Report, and hoped to have the subcontracts in place with Iowa State University and Frontline BioEnergy, LLC once we ha approval from the CAM. We also planned to have the updated Advanced Reconciliation to the CAM for approval as requested.

09 BIOMASS FUELS↗

Methods for Explainable Artificial Intelligence

We explored ways of quantifying information in a neural network. This can be used to determine the right size of a network or to infer the way in which a network is processing information. The first year and a half was somewhat exploratory while the last half of the project focused on approaches that seemed to show the most promise. The introduce a new way of computing explainable artificial intelligence (XAI) saliency maps that is several orders of magnitude faster than methods with similar fidelity We call it FastCAM. The method works be combining a Class Activation Map (CAM) method such as GradCAM with a forward activation map computed with a statistic we call SMOE Scale. The addition of the forward activation maps to CAM methods seems to always improve their fidelity. At the same time, computational overhead is not increased by very much. While Gradients with SmoothGrad scores better on some fidelity measures, it is overall not as good and requires more than 1500 times to compute. We demonstrate two completed applications of FastCAM on tasks outside of the LDRD at LLNL. The source code for FastCAM is currently being implanted into Captum, the official XAI toolkit for the popular deep learning toolkit PyTorch. The LDRD currently has 13 publications released to the public. 10 of them are journal length.

97 MATHEMATICS AND COMPUTING↗

Industrial Deployment of Computer Aided Manufacturing Software for Hybrid Advanced Manufacturing

GibbsCAM, 3D Systems’ software product, is a full-featured CAM system that provides powerful CNC programming, capabilities, and solutions, delivering high quality parts without sacrificing ease of use. Oak Ridge National Laboratory (ORNL) collaborated with GibbsCAM to evaluate their toolpath generating software being developed for both blown powder and hybrid CNC/additive manufacturing machinery. The current approach in toolpath solutions for additive manufacturing is to utilize subtractive toolpaths created by existing CAM software and reversing it for additive manufacturing applications. GibbsCAM is working to develop a full solution to mitigate the challenges that arise with this approach and deploy a fully customized solution for producing quality, reliable components for a range of different DED systems. When successful, this will be an automated solution deployed through a future release of GibbsCAM software.

97 MATHEMATICS AND COMPUTING↗

Aerosol Manufacturing Technology to Produce Low-Cobalt Li-ion Battery Cathodes

Although considerable progress has been made with battery materials over the last 10 years, the cathode remains a major performance-limiting material in Li-ion battery (LIB) technology. New materials and battery chemistries will overcome some of the remaining challenges, but cathode materials must also be manufactured at a lower cost and with a smaller environmental footprint using new processes that can also enable improved control over stoichiometry, morphology, and compositional homogeneity. Cabot, Argonne National Laboratory and SAFT research teams are combining their extensive expertise in particle synthesis, battery materials and cell design to develop a low-cost, flexible aerosol manufacturing technology for production of high-performance cathode active materials (CAM). This project will develop low-Co CAMs via Reactive Spray Technology (RST) and Flame Spray Pyrolysis (FSP) to reach performance targets of < 50 mg Cobalt/Wh.

25 ENERGY STORAGE↗

Digital Twin User Guide for Chelan County Public Utility District

This user manual offers a comprehensive guide for developing a Digital twin (DT) of a Kaplan turbine at Chelan County Public Utility District (Chelan PUD) using neural networks. As variable renewable generation expands, hydropower units must operate with optimal efficiency and stability. For Kaplan machines, this flexibility is achieved through coordinated control of guide vane (wicket gates) opening and runner blade pitch, which amplifies the plant’s inherent nonlinear behavior and challenges traditional physics-only modeling. The efficiency of the Kaplan turbine varies with different combinations of the guide vans (wicket gate) opening and the blade angle. Each guide van opening and blade angle has a corresponding highest efficiency point, forming a cam relationship that represents the optimal combination.The discharge of a hydraulic turbine is controlled by the opening angle of the guide vans. Therefore, for each value of head, there is a certain guide van opening and blade angle that corresponds to the highest efficiency. For a given head, different combinations of the guide van opening and blade angle have different efficiencies. Therefore, coordinate cam curves are used to describe the relationship between the wicket gate opening and blade angle with different water head. To address these challenges, the manual details a data-driven modeling and learning workflow centered on structured neural networks. The approach is designed to forecast critical operational variables—discharge flow, net head, penstock (or scroll-case) pressure, and generator electrical outputs—by leveraging real-time inputs such as the generator power control setpoint, exciter field current and field voltage, together with hydromechanical commands (e.g., gate position and, when available, runner blade-pitch angle). The neural models are trained and validated on operational data from a Kaplan unit operated by Chelan PUD, demonstrating that the structured NN architecture can learn the coupled gate–blade–electrical dynamics. The result is a robust DT that improves situational awareness and supports data-informed decision-making for Chelan PUD’s Kaplan turbine operations.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Genetic analysis of the regulation of TCH gene expression, Final Report

The Arabidopsis TCH genes, originally isolated as a consequence of their upregulation in response to the mechanical stimulus of touch, are also upregulated by a variety of seemingly disparate environmental and hormonal stimuli. To gain insight into the complexities of TCH gene regulation, a number of approaches were taken. Regulatory elements responsible for regulation were identified and characteristics of the regulation were evaluated. Reporter genes were used to monitor expression localization and dynamics. Microarray analyses of genome-wide expression behavior indicated that touch-inducible gene expression is more widespread than generally appreciated. Identification of all touch-regulated genes shed light on the types of cellular processes that may be altered in response to mechanical stress perturbations. Expression of the TCH2 gene, also called CML24, encoding a calmodulin (CaM)-like (CML) protein, was evaluated. CML24 shares over 40% amino acid sequence identity with CaM, has 4 EF hands and undergoes a Ca2+-dependent change in migration rate through denaturing gel electrophoresis, indicating that CML24 binds Ca2+ and, as a consequence, undergoes conformational changes. CML24 expression occurs in all major organs and is induced from 2- to 15-fold in plants subjected to touch, darkness, heat, cold, hydrogen peroxide, abscisic acid (ABA) and indole-3-acetic acid. The putative CML24 regulatory region confers reporter expression at sites of predicted mechanical stress, in regions undergoing growth, in vascular tissues and various floral organs and in stomata, trichomes and hydathodes. CML24 underexpressing transgenics are resistant to ABA inhibition of germination and seedling growth, defective in long-day induction of flowering, and have enhanced tolerance to CoCl2, molybdic acid, ZnSO4 and MgCl2. These data present evidence that CML24 encodes a potential Ca2+ sensor that may function to enable responses to ABA, day length and presence of various salts. Further investigation of CML24 function and regulation led to the finding that CML24 has a critical role in nitric oxide regulation. Distinct tilling mutant alleles demonstrated that CML24 can act as a switch in the response to day length perception. Because of potential redundancy with the related CML23 gene, CML23 T-DNA insertion mutants were identified and characterized. Together, CML23 and CML24 impact the autonomous regulatory pathway of the transition to flowering. Nitric oxide levels are elevated in cml23/cml24 double mutants. Therefore, CML23 and CML24 are potential calcium sensors regulate nitric oxide accumulation. In collaboration with Drs. McCann and Carpita, fourier transform infrared spectroscopy (FTIR) was used to assess, verify and classify wall architectural changes that occur as a result of single XTH insertion mutations. Thirty-four homozygous mutant lines of Arabidopsis representing 21 members of the xyloglucan endotransglucosylase/hydrolase gene family provided a set of mutants to characterize. Kohonen networks classified cell wall architectures of xth mutant lines and previously characterized cell wall mutants. The xth mutants were found to have chemical changes in their cell walls not detectable as phenotypic growth and development changes, consistent with the existence of feed-back loops that modify wall composition in response to a life-long deficiency of a cell wall enzyme. To gain insight into the potential physiological relevance of the distinct members of the XTH family, GUS reporter fusion genes were constructed, and plants expressing these transgenes were characterized to reveal spatial and temporal patterns of expression. In addition, Genevestigator sources were mined for comprehensive and comparative XTH expression regulation analysis. These data revealed that the Arabidopsis XTHs are likely expressed in every developmental stage from seed germination through flowering. All organs showed XTH::GUS expression and most, if not all, are found to express multiple XTH::GUS genes suggesting that XTHs may contribute to morphogenesis at every developmental stage and in every plant organ. Different XTHs have remarkably diverse and distinct expression patterns indicating that paralogous genes have evolved differential expression regulation perhaps contributing to the maintenance of the large gene family. Extensive overlap in XTH expression patterns is evident; thus, XTHs may act combinatorially in determining wall properties of specific tissues or organs. Knowledge of gene-specific expression among family members yields evidence of where and when gene products may function and provides insights to guide rational approaches to investigate function through reverse genetics.

59 BASIC BIOLOGICAL SCIENCES↗

Analysis of Filesystem Utilization by the ?Ensemble of Models? Approach (U)

In order to execute Uncertainty Quantification (UQ) studies, the number of reads placed on the filesystem will increase. This document works through the file I/O for a climatology UQ study. The utilization of the filesystem for the above discussed will be similar for ICF and Stockpile Stewardship applications. The current state of the art for the quantification of uncertainty of a multi-physics simulation code is the utilization of an ensemble of models approach. As an overview of the ensemble of models approach, a set of uncertain input parameters is identified along with an identified set of observational and output parameters. The model is computed n number of times with each ensemble simulation using a unique set of parametric combinations of input parameters thereby creating an ensemble of simulations. Response surface models (also known as statistical emulator models, surrogate models, or meta models) are trained using the ensemble results. The response models are then convolved with observational data to further constrain input parameters and to create uncertainty bounds on the model outputs. Using the Community Climate System Model (CCSM) specifically the atmospheric component of CCSM, the Community Atmospheric Model (CAM), as the model of interest, this document provides a rough model of the demands on a filesystem that is needed to execute a UQ study on CAM. Each ensemble simulation consists of 12 simulation years and uses 384 processors on the Atlas machine. The LLNL UQ Pipeline is LLNL's standard tool to execute UQ studies. The UQ Pipeline possesses the capability to execute the ensemble simulations on LLNL's diverse set of HPC environments, produce response models, generate uncertainty bounds, and analyze the results. The process executing the LLNL UQ Pipeline is run on a different compute node from the set of concurrent, executing ensemble simulations.

99 GENERAL AND MISCELLANEOUS↗

The Influence of Cloud Microphysics and Radiation on the Response of Water Vapor and Clouds to Climate Change

Uncertainties in representing the atmospheric water cycle are major obstacles to the accurate prediction of future climate. This project focused on addressing some of these uncertainties by implementing new physics for convection and radiation into the NCAR Community Atmosphere Model (CAM). To better understand and eventually better represent these processes in this major national climate model, we modified CAM3.5 to use the convection and cloud schemes developed by the Massachusetts Institute of Technology (MIT) and the RRTMG rapid radiation code for global climate models developed by Atmospheric and Environmental Research, Inc. (AER). The impact of the new physics on the CAM3.5 simulation of convection on diurnal and intra-seasonal scales, on intra-seasonal oscillations and on the distribution of water vapor has been investigated. In addition, the MIT and AER physics packages have been incorporated and tested in combination within the Weather Research and Forecasting (WRF) regional forecast model for the purpose of evaluating and improving convective and radiative processes on time scales appropriate to weather simulations. It has been found that the application of the AER radiation and MIT convection produces significant improvements in the modeled diurnal cycle of convection, especially over land, in the NCAR climate model. However, both the standard CAM3.5 and the modified CAM3.5 with the new physics are unable to capture the proper spectrum and propagating characteristics of dynamical intra-seasonal oscillations such as the Madden-Julian Oscillation. In addition, it has been shown that the new physics methods modify, but do not substantially improve, the distribution of upper tropospheric water vapor in CAM as established through the comparison of modeled and observed satellite radiances. This suggests that continuing regional discrepancies in water vapor amounts in the climate model may not be solely related to convective or radiative processes. The major results of this project have been described in more detail in a journal article titled The Impacts of AER Radiation and MIT Convection on the Water Cycle Simulated by CAM3.5 that will be submitted for publication during Fall 2010.

54 ENVIRONMENTAL SCIENCES↗