Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Blackbody”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Airborne spectrophotometry of P/Halley from 20 to 65 microns

Simultaneous 20 to 65 microns spectrometry and 100 microns photometry of P/Halley obtained on board the Kuiper Airborne Observatory (KAO) in 1985 Dec. and 1986 April are discussed. Spectra with resolution 30 to 50 were obtained with the NASA/Goddard 24 channel grating spectrometer. Measurements were made on the nucleus as well as 5 points along and perpendicular to the Sun-tail direction. The observations reveal the absence of any strong spectral features. The color temperature of the dust varies over time scales as short as 2 days, but is higher than that expected for a rapidly rotating blackbody at the same distance from the Sun. The color temperature does not vary within 1 arcmin of the nucleus, but the coma is brighter on the sunward side than on the antisunward side.

Glaccum, W.↗

Airborne spectrophotometry of Comet Halley from 5 to 9 microns

Spectrophotometry from 5 to 9 microns (resolution = 0.02) of comet Halley was obtained from the Kuiper Airborne Observatory on 1985 Dec. 12.1 and 1986 April 8.6 and 10.5 UT. Two spectral features are apparent in all the observations, one from 5.24 to 5.6 microns, and the silicate emission feature which has an onset between 7 and 8 microns. There is no evidence for the 7.5 microns feature observed by the Vega 1 spacecraft; the large difference between the areal coverage viewed from the spacecraft and the airplane may explain the discrepancy. Color temperatures significantly higher than a blackbody indicate that small particles are abundant in the coma. Significant spatial and temporal variations in the spectrum show trends similar to those observed from the ground.

Campins, H.↗

Spectral variability of Cygnus X-2 - Structure in the circumsource material

Cygnus X-2 was observed during 13 separate pointings in the course of 1 yr by the Einstein monitor proportional counter. During one of these pointings the objective grating spectrometer was also used. It is found that the data from these observations are well fitted by single-component thermal bremsstrahlung models with temperatures ranging from 4-12 keV; however, two-component models, where one component is a blackbody, are not excluded. The X-ray light curve appears to be correlated with the 9.843 day optical period, possibly implying a partial eclipse of the X-ray source. During the high states there are irregular dips of up to 30 percent in intensity that last for 300-700 s. The high spectra resolution grating data were taken during one of the high states when these dips occurred, and it is possible to distinguish variable variable emission and absorption features due to Fe, O, and Ne. The picture of Cygnus X-2 is consistent with an intrinsic thermal source surrounded by a hot accretion disk corona. This model can be used to explain the high and low X-ray states, the variability within the states, and the intensity dips which occur in the high states.

Vrtilek, S. D.↗

Solar pumped laser technology options for space power transmission

An overview of long-range options for in-space laser power transmission is presented. The focus is on the new technology and research status of solar-pumped lasers and their solar concentration needs. The laser options include gas photodissociation lasers, optically-pumped solid-state lasers, and blackbody-pumped transfer lasers. The paper concludes with a summary of current research thrusts.

Conway, E. J.↗

X-ray emission lines from three Galactic bulge sources

X-ray spectroscopic observations obtained with the Einstein objective grating spectrometer (OGS) and monitor proportional counter (MPC) instruments of three Galactic bulge sources, the globular cluster burst source 1820-30, the burster Serpens X-1, and the GX 9+9 are presented. Joint spectral fits to the OGS and MPC data are consistent for all three sources with either a thermal bremsstrahlung model with temperature ranging from 6 to 10 keV or with a two-component blackbody model, where one component may be associated with the neutron star and one with the accretion disk. The spectra of Serpens X-1 and 1820-30 harden with increases in intensity. The implications of the results for recent models of low-mass X-ray binaries are discussed.

Vrtilek, S. D.↗

A multiwavelength investigation of the supernova remnant IC 443

Multiwavelength observations of the supernova remnant IC 443 at radio, infrared, optical, ultraviolet, and X-ray wavelengths are presented. This morphological study of IC 443 presents a detailed picture of an adolescent supernova remnant in a multiphase interstellar medium. Radio observations show that better than 80 percent of the continuum emission at 18 cm is in a large-scale (greater than 18 arcmin) component. Decomposition of the infrared data shows that radiatively heated dust, shocked blackbody dust emission, and infrared line emission are all important components of the observed IRAS fluxes. The morphology of the IC 443 region is consistent with a supernova blast in an interstellar medium with a nonuniform distribution of clouds. The bright northeast rim and the great extent of the remnant to the southwest are most easily explained by a cloud filling factor which is greatest in the northeast and falls off toward the southwest.

Mufson, S. L.↗

Persistent emission and bursts from Aquila X-1 observed by Einstein

A two-component model is applied to an X-ray outburst from Aql X-1 recorded by the Einstein Observatory in March-April 1979. The model treats such outbursts as a combination of a soft, multicolor component (accretion disk) and a hard-blackbody component (boundary layer emission). Evaluation of the light curves indicates that the bursts were caused by an increase in the accretion rate. The calculations also suggest that the system observed is inclined at a 33 deg angle.

Czerny, M.↗

A spectral study of the persistent X-ray flux from 4 U/MXB 1636-53

A spectral analysis of the persistent X-ray flux from the X-ray burst source 4 U/MXB 1636-53, which was continuously observed with EXOSAT for about 25 h in May, 1984, is presented. It is found that no standard one-component spectral model provides an acceptable representation of all the data. However, almost all 'complex one-component' and 'two-component' models do accurately fit the data. A blackbody plus a 'multicolor' disk spectrum does not fit these data. In addition, some 'two-component' spectral models can be fitted to the data with more than one set of different parameter values. Based on these results, it is suggested that the various physical scenarios that have been proposed to interpret 'two-component' spectra of low-mass X-ray binaries may be based on mathematical parameterizations which may not provide unique representations of the data. If this is the case, the reported 'two-component' mathematical fits may not have any true physical significance.

Vacca, W. D.↗

Einstein observations of EF Eridani (2A 0311-227) - The textbook example of AM Herculis-type systems

Hard and soft X-ray spectra of the AM Herculis star EF Eridani obtained with the Einstein Observatory are found to be fitted by a thermal bremsstrahlung spectrum with kT of about 20 keV, and a blackbody spectrum with kT of between 16 and about 33 eV, respectively. EF Eri is shown to behave almost exactly as predicted by simple theory, with its soft X-ray luminosity not exceeding the hard X-ray luminosity by more than a factor of three, and both spectra originating from the same active pole of the accreting white dwarf. The data are consistent with a model involving an accretion stream penetrating deep into the magnetosphere of the white dwarf, such that accretion occurs along nonpolar field lines, and an 'X-ray auroral oval' emission is formed on the surface of the white dwarf.

Beuermann, K.↗

IRAS colors of normal stars

Using stars from the Bright Star Catalog, supplemented by cool dwarf stars from the Gliese catalog, that were detected by IRAS, the authors define empirically the median intrinsic visual-to-infrared color indices for 'normal' stars as a function of IRAS wavelength, spectral type and luminosity class. Anomalously red stars are discussed. Two otherwise undistinguished F giant stars are found with significant excesses at 12 microns. Be stars differ markedly from nonemission B stars in their V-(12) indices due to contamination of the former by free-free emission. Both B and Be stars show large dispersions in V-(25) colors that are associated with the heating of local, but strictly interstellar, dust clouds by some of the non-emission B stars. The derived sequences of stellar colors are closely approximated by either simple blackbody predictions or by model-atmosphere calculations.

Cohen, Martin↗

The peculiar planetary nebula 75+35 deg 1

The high galactic latitude planetary nebula 75+35 deg 1 was observed in the low-dispersion mode of the IUE satellite. The UV spectrum is characterized by a strong continuum that matches the energy distribution of a blackbody curve of 90,000 K + or - 5000 K. The color temperature of 94,000 K + or - 4000 K is derived from the UV color indices. The spectral type mimics that of an O7.5 V star; a very strong N V 1240-A feature with a P Cygni profile is present, in addition to a very weak C IV P Cygni line. A very slight depression in the 2200-A region suggests very little interstellar absorption with an upper limit of E(B-V) = 0.025 mag, as would be expected for a high galactic latitude object. The ultraviolet observations, in context with the optical data, indicate that this object is not a typical planetary.

Feibelman, Walter A.↗

Measurements of surface energy budgets in the rocky mountains of Colorado

The surface energy balance of a mountain valley and a mountain peak were continuously monitored for periods of 126 and 34 days, respectively. The data yielded temporally resolved, high-quality measurements of the radiative, soil, and total atmospheric turbulent heat fluxes. Comparative data for the two sites reveal the effects of terrain setting and surface cover in modulating the heat balance. A procedure is suggested for accommodating local advective affects due to variable terrain and surface cover to allow partitioning of the total turbulent flux into values for sensible and latent heat. This procedure relies on a stability-dependent coefficient of turbulent transfer which is locally calibrated to systematically minimize advection-related errors. Scaling functions for the transfer coeffient are based on the effective blackbody temperature of the surface. Consequently, the procedure offers an opportunity for developing reliable bulk representations of heat transfer at the surface for use with remote sensing data and with models of the soil and surface cover in complex terrain.

Sheaffer, John D.↗

A search for X-ray emission from a nearby pulsar - PSR 1929 + 10

Observations of the radio pulsar PSR 1929 + 10 with the Exosat observatory are reported. A 2 sigma upper limit of 0.0005 cts/s was obtained in the 0.04-2.4 keV range, which translates into a luminosity upper limit of 2 x 10 to the 29th erg/s for a power-law source with photon number index 1-3, and a luminosity upper limit of 10 to the 30th erg/s corresponding to a temperature of 190,000 K for a blackbody with radius 10 km. The implications of these upper limits for various models and their compatibility with the positive detection of this source by the Einstein Observatory are discussed.

Alpar, A.↗

Laser Pyrometer For Spot Temperature Measurements

Laser pyrometer makes temperature map by scanning measuring spot across target. Scanning laser pyrometer passively measures radiation emitted by scanned spot on target and calibrated by similar passive measurement on blackbody of known temperature. Laser beam turned on for active measurements of reflectances of target spot and reflectance standard. From measurements, temperature of target spot inferred. Pyrometer useful for non-contact measurement of temperature distributions in processing of materials.

Elleman, D. D.↗

Optical Sensor Of High Gas Temperatures

Contact pyrometer resists effects of heat, vibration, and moisture. New sensor consists of shielded sapphire rod with sputtered layer of precious metal on end. Metal layer acts as blackbody. Emits radiation having known dependence of spectral distribution with temperature of metal and temperature of hot gas flowing over metal. Fiber-optic cable carries radiation from sapphire rod to remote photodetector.

Hill, Arthur J.↗

The NBS scale of radiance temperature

The measurement methods and instrumentation used in the realization and transfer of the International Practical Temperature Scale (IPTS-68) above the temperature of freezing gold are described. The determination of the ratios of spectral radiance of tungsten-strip lamps to a gold-point blackbody at a wavelength of 654.6 nm is detailed. The response linearity, spectral responsivity, scattering error, and polarization properties of the instrumentation are described. The analysis of the sources of error and estimates of uncertainty are presented. The assigned uncertainties (three standard deviations) in radiance temperature range from + or - 2 K at 2573 K to + or - 0.5 K at 1073 K.

Waters, William R.↗

Noncontact temperature measurement in glass and other transparent materials

The relationship between the optical properties of glass and temperature measurements in it by radiation pyrometry are described. Equations for the calculation of emissivity are presented and the transmittance, surface reflection and absorption characteristics of glass are defined. Recommendations are given regarding the selection of pyrometer wavelength sensitivity and the use of a blackbody radiator.

Doremus, Robert H.↗

Sun sensor boresight alignment testing for the Halogen Occultation Experiment

The boresight alignment testing for the sun sensor assembly on the Halogen Occultation Experiment (HALOE) is described. The sun sensor assembly consists of three sensors that provide feedback signals for controlling dual axes gimbals. Two energy balancing silicon detectors are operated as wideband sensors in the azimuth and elevation axes. The third sensor is a silicon photodiode array operated as a narrow-band sensor in the elevation axis. These sensors are mounted on a common Invar structure which is mounted to the HALOE telescope. A blackbody was used as the stimulating source to perform the initial boresight alignment and this was checked with a heliostat solar look and a direct solar look. These tests are explained with a comparison between each source used.

Moore, A. S.↗