SEARCH · Engineering Papers

Results for “Best”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Prediction and quickening in perspective flight displays for curved landing approaches

In an empirical test of various prediction and quickening display algorithms, 18 professional pilot-subjects made four curved-path landing approaches in a GAT-2 simulator using each of 18 dynamically different display configurations in a within-subject design. Results indicate that second- and third-order predictor displays provide the best lateral performance. Intermediate levels of prediction and quickening provide best vertical control. Prediction quickening algorithms of increasing computational order significantly reduce aileron, rudder, and elevator control responses, reflecting successive reductions in cockpit work load. Whereas conventional crosspointer displays are not adequate for curved landing approaches, perspective displays with predictors and some vertical dimension quickening are highly effective.

Jensen, R. S.↗

NASA NTRS1982

Use of optimization to predict the effect of selected parameters on commuter aircraft performance

The relationships between field length and cruise speed and aircraft direct operating cost were determined. A gradient optimizing computer program was developed to minimize direct operating cost (DOC) as a function of airplane geometry. In this way, the best airplane operating under one set of constraints can be compared with the best operating under another. A constant 30-passenger fuselage and rubberized engines based on the General Electric CT-7 were used as a baseline. All aircraft had to have a 600 nautical mile maximum range and were designed to FAR part 25 structural integrity and climb gradient regulations. Direct operating cost was minimized for a typical design mission of 150 nautical miles. For purposes of C sub L sub max calculation, all aircraft had double-slotted flaps but with no Fowler action.

Wells, V. L.↗

NASA NTRS1980

Inert gas ion thruster

Inert gas performance with three types of 12 cm diameter magnetoelectrostatic containment (MESC) ion thrusters was tested. The types tested included: (1) a hemispherical shaped discharge chamber with platinum cobalt magnets; (2) three different lengths of the hemispherical chambers with samarium cobalt magnets; and (3) three lengths of the conical shaped chambers with aluminum nickel cobalt magnets. The best argon performance was produced by a 8.0 cm long conical chamber with alnico magnets. The best xenon high mass utilization performance was obtained with the same 8.0 cm long conical thruster. The hemispherical thruster obtained 75 to 87% mass utilization at 185 to 205 eV/ion of singly charged ion equivalent beam.

Ramsey, W. D.↗

NASA NTRS1982

Characterization of advanced electric propulsion systems

Characteristics of several advanced electric propulsion systems are evaluated and compared. The propulsion systems studied are mass driver, rail gun, MPD thruster, hydrogen free radical thruster and mercury electron bombardment ion engine. These are characterized by specific impulse, overall efficiency, input power, average thrust, power to average thrust ratio and average thrust to dry weight ratio. Several important physical characteristics such as dry system mass, accelerator length, bore size and current pulse requirement are also evaluated in appropriate cases. Only the ion engine can operate at a specific impulse beyond 2000 sec. Rail gun, MPD thruster and free radical thruster are currently characterized by low efficiencies. Mass drivers have the best performance characteristics in terms of overall efficiency, power to average thrust ratio and average thrust to dry weight ratio. But, they can only operate at low specific impulses due to large power requirements and are extremely long due to limitations of driving current. Mercury ion engines have the next best performance characteristics while operating at higher specific impulses. It is concluded that, overall, ion engines have somewhat better characteristics as compared to the other electric propulsion systems.

Ray, P. K.↗

NASA NTRS1982

Development of a large area space solar cell assembly

The development of a large area high efficiency solar cell assembly is described. The assembly consists of an ion implanted silicon solar cell and glass cover. The important attributes of fabrication are the use of a back surface field which is compatible with a back surface reflector, and integration of coverglass application and cell fabrications. Cell development experiments concerned optimization of ion implantation processing of 2 ohm-cm boron-doped silicon. Process parameters were selected based on these experiments and cells with area of 34.3 sq cm wre fabricated. The average AMO efficiency of the twenty-five best cells was 13.9% and the best bell had an efficiency of 14.4%. An important innovation in cell encapsulation was also developed. In this technique, the coverglass is applied before the cell is sawed to final size. The coverglass and cell are then sawed as a unit. In this way, the cost of the coverglass is reduced, since the tolerance on glass size is relaxed, and costly coverglass/cell alignment procedures are eliminated. Adhesive investigated were EVA, FEP-Teflon sheet and DC 93-500. Details of processing and results are reported.

Spitzer, M. B.↗

NASA NTRS1982

IUE spectroscopy, visible-band polarimetry, and radiometry of V641 Mon

This hot, double line, ellipsoidal variable member of NGC 2264 has been shown previously to be either a semi-detached or contact close binary. Low-resolution IUE spectra are best fitted to a Kurucz model atmosphere for very small (approximately 0.08 mag) E(B-V). The familiar interstellar absorption dip near lambda 2200 is apparently absent. A suitable model atmosphere can be fitted to the IUE fluxes, but flux excesses (compared to the model) appear for all the published U through L magnitudes. The spectrum of the B through L excess appears to follow a .0001 lambda dependence. It is shown that this cannot be interpreted as arising from another star fortuitously observed in the visible band or IR. Ground based polarization measures indicate V641 Mon to be a polarization variable. Previous and new V light curves show the amplitude of light variability itself to be variable by about a factor of 2. It is suggested that all these observed characteristics are best explained by postulating "third light" and identifying part of it with Rayleigh scattered starlight very near to the stars. From this same region there arise circumstellar absorptions which give rise to nontheoretical strengths for Si II and Si III lines.

Koch, R. H.↗

NASA NTRS1982

Photovoltaic module encapsulation design and materials selection, volume 1

Encapsulation material system requirements, material selection criteria, and the status and properties of encapsulation materials and processes available are presented. Technical and economic goals established for photovoltaic modules and encapsulation systems and their status are described. Available encapsulation technology and data are presented to facilitate design and material selection for silicon flat plate photovoltaic modules, using the best materials available and processes optimized for specific power applications and geographic sites. The operational and environmental loads that encapsulation system functional requirements and candidate design concepts and materials that are identified to have the best potential to meet the cost and performance goals for the flat plate solar array project are described. Available data on encapsulant material properties, fabrication processing, and module life and durability characteristics are presented.

Cuddihy, E.↗

NASA NTRS1982

Pilot model hypothesis testing

The aircraft control time history predicted by the optimal control pilot model and actual pilot tracking data obtained from NASA Langley's differential maneuvering simulator (DMS) are analyzed. The analysis is performed using a hypothesis testing scheme modified to allow for changes in the true hypothesis. A finite number of pilot models, each with different hypothesized internal model representations of the aircraft dynamics, are constructed. The hypothesis testing scheme determines the relative probability that each pilot model best matches the DMS data. By observing the changes in probabilities, it is possible to determine when the pilot changes control strategy and which hypothesized pilot model best represent's the pilot's control behavior.

Broussard, J. R.↗

NASA NTRS1981

Improving the MLS through enhanced cockpit displays

A simulator investigation of various prediction and quickening algorithms in computer-generated forward-looking displays is presented; the algorithms are used to improve manual aircraft control on curved microwave landing system approaches. The experimental facility consisted of a Link GAT-2 simulator, a PDP 11/40 minicomputer, a high-speed graphic display, a TV camera, and a CRT monitor. Results indicate that second- and third-order predictor displays provide the best lateral performance and that intermediate levels of prediction and quickening provide the best vertical control. Prediction/quickening algorithms of increasing computational order were found to significantly reduce aileron, rudder, and elevator control responses. The conventional crosspointer displays yielded an average 2-sigma lateral error of + or - 200 over all wind conditions at 500 m from touchdown, and was therefore unable to meet FAA requirements (+ or - 22.9 m); the pictorial-preview display yielded much better results: an average 2-sigma lateral error of + or - 27 m. Neither display was able to approach the FAA specified accuracy requirement in the vertical dimension (+ or - 3.7 m).

Jensen, R. S.↗

NASA NTRS1982

A comparative study of computational methods in cosmic gas dynamics

Many theoretical investigations of fluid flows in astrophysics require extensive numerical calculations. The selection of an appropriate computational method is, therefore, important for the astronomer who has to solve an astrophysical flow problem. The present investigation has the objective to provide an informational basis for such a selection by comparing a variety of numerical methods with the aid of a test problem. The test problem involves a simple, one-dimensional model of the gas flow in a spiral galaxy. The numerical methods considered include the beam scheme, Godunov's method (G), the second-order flux-splitting method (FS2), MacCormack's method, and the flux corrected transport methods of Boris and Book (1973). It is found that the best second-order method (FS2) outperforms the best first-order method (G) by a huge margin.

Van Albada, G. D.↗

NASA NTRS1982

Focal surfaces of offset dual-reflector antennas

An analytical technique is described for finding the best focal surfaces for offset-fed dual-reflector antennas. A ray tracing procedure traces the loci of rays incident on the main reflector onto a plane or 'screen' situated perpendicular to a central ray of the antenna system. Given, then, by computer graphics, the best feed locations for azimuth and elevation plane patterns, an aperture diffraction method is used which can compute the sidelobe levels and beamwidths resulting from aperture phase errors on scanned or multibeam patterns. High-magnification Cassegrain or Gregorian antennas, with tilt angles optimised according to Japanese criteria, produce excellent radiation diagrams many beamwidths from the central, unaberrated pattern direction.

Sletten, C. J.↗

NASA NTRS1981

Schiaparelli Basin, Mars - Morphology, Tectonics and infilling history

Schiaparelli Basin (an elliptical basin 460 x 400 km in diameter) is the best preserved large impact structure on Mars. Multiple periods of basin infilling by lava and eolian material can be recognized. Numerous ridges within the basin show a strong northwest-southeast orientation, consistent with a regional stress field induced by the loading of the lithosphere by Tharsis. Ridge location is, however, apparently dominated by a buried peak ring. Earth-based radar measurements of Schiaparelli indicate that the ejecta deposits are best preserved on topographic highs southeast of the basin, while eolian materials have preferentially accumulated in the lower (western) side of the basin. Lyot (215 km diameter) is believed to be a good analogue to the pre-infilled Schiaparelli, and indicates that Schiaparelli probably had an initially hummocky floor topography and both ballistic and ground-flow ejecta deposits.

Mouginis-Mark, P. J.↗

NASA NTRS1981

Laser processing of silicon solar cells

Results of a study to utilize an Nd:glass laser for production line annealing of ion implantation induced damage in solar cells are reported. Czochralski-grown and sawn Si wafers 7.6 cm in diam, 0.35 mm thick, were implanted with phosphorus junctions and boron BSFs. Annealing with electron beam, laser, and firing of an Al paste to form the BSFs in different cells was compared. The laser was employed at 1.06 and 0.53 micron and in combination of both, with a 20-50 nsec pulsewidth, and energy densities of 1.2, 1.5, 1.9, and 2.1 J/sq cm. Best optical coupling was observed with the combined wavelengths and a 20 nsec pulse, using energy densities less than 1.5 J/sq cm. Although the Al sintered cells displayed the best characteristics, laser annealing is concluded to offer electrically active, defect-free, shallow junction Si substrates for high efficiency cells.

Katzeff, J. S.↗

NASA NTRS1982

Assessment of radar resolution requirements for soil moisture estimation from simulated satellite imagery

Radar simulations were performed at five-day intervals over a twenty-day period and used to estimate soil moisture from a generalized algorithm requiring only received power and the mean elevation of a test site near Lawrence, Kansas. The results demonstrate that the soil moisture of about 90% of the 20-m by 20-m pixel elements can be predicted with an accuracy of + or - 20% of field capacity within relatively flat agricultural portions of the test site. Radar resolutions of 93 m by 100 m with 23 looks or coarser gave the best results, largely because of the effects of signal fading. For the distribution of land cover categories, soils, and elevation in the test site, very coarse radar resolutions of 1 km by 1 km and 2.6 km by 3.1 km gave the best results for wet moisture conditions while a finer resolution of 93 m by 100 m was found to yield superior results for dry to moist soil conditions.

Ulaby, F. T.↗

NASA NTRS1981

Space Operations Center, shuttle interaction study, volume 1

The feasibility of the shuttle remote manipulator system (SRMS)-aided space operations center (SOC)/orbiter berthing was evaluated to determine: (1) whether the initial rates between the SOC and the orbiter can be removed by the arm; (2) what is the best strategy to be used; (3) whether the post-capture and maneuvering loads are within the capability of the SRMS; (4) can the SOC berthing port be brought in the immediate proximity of the orbiter berthing port; and (5) what is the best way to remove the residual relative motions. Various notational conventions are established and various important locations on the orbiter and SOC structures are defined. Reference frames are defined together with the mass properties of both the SOC and the orbiter.

Source record↗

NASA NTRS1982

Assessment of turbulent models for scramjet flowfields

The behavior of several turbulence models applied to the prediction of scramjet combustor flows is described. These models include the basic two equation model, the multiple dissipation length scale variant of the two equation model, and the algebraic stress model (ASM). Predictions were made of planar backward facing step flows and axisymmetric sudden expansion flows using each of these approaches. The formulation of each of these models are discussed, and the application of the different approaches to supersonic flows is described. A modified version of the ASM is found to provide the best prediction of the planar backward facing step flow in the region near the recirculation zone, while the basic ASM provides the best results downstream of the recirculation. Aspects of the interaction of numerica modeling and turbulences modeling as they affect the assessment of turbulence models are discussed.

Sindir, M. M.↗

NASA NTRS1982

The abundances of CH4, CH3D, NH3, and PH3 in the troposphere of Jupiter derived from high-resolution 1100-1200/cm spectra

High-resolution spectra of the 1100-1200/cm region of the central part of Jupiter obtained in March 1980 and April 1981 are analyzed. The best fit NH3 distribution curve reveals a higher than solar mixing ratio, the abundance of NH3 to that of H2 being (3.3 + or - 1.7) x 10 to the -4th, below the 147 K layer (greater than 0.6 atmosphere). If NH3 ice particles are introduced as an opacity source, the NH3 mixing ratio below the 147 K layer can be lowered, but the fit is worse than that given by the model that excludes NH3 ice particles. The best fit PH3 distribution curve exhibits a PH3/H2 mixing ratio of (8.3 + or - 2.0) x 10 to the -7th in the troposphere. In addition, a CH4/H2 mixing ratio of (2.5 + or - 0.4) x 10 to the -3rd is found in the troposphere.

Knacke, R. F.↗

NASA NTRS1983

Design of dry-friction dampers for turbine blades

A study is conducted of turbine blade forced response, where the blade has been modeled as a cantilever beam with a generally dry friction damper attached, and where the minimization of blade root strain as the excitation frequency is varied over a given range is the criterion for the evaluation of the effectiveness of the dry friction damper. Attempts are made to determine the location of the damper configuration best satisfying the design criterion, together with the best damping force (assuming that the damper location has been fixed). Results suggest that there need not be an optimal value for the damping force, or an optimal location for the dry friction damper, although there is a range of values which should be avoided.

Ancona, W.↗