Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BATTERIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Characterising local environments in high energy density Li-ion battery cathodes: a combined NMR and first principles study of LiFe x Co 1-x PO 4

Olivine-type LiCoPO4 (LCP) is a high energy density lithium ion battery cathode material due to the high voltage of the Co2+/Co3+ redox reaction. However, it displays a significantly poorer electrochemical performance than its more widely investigated isostructural analogue LiFePO4 (LFP). The co-substituted LiFexCo1-xPO4 olivines combine many of the positive attributes of each end member compound and are promising next-generation cathode materials. Here, the fully lithiated x = 0, 0.25, 0.5, 0.75 and 1 samples are extensively studied using 31P solid-state nuclear magnetic resonance (NMR). Practical approaches to broadband excitation and for the resolution of the isotropic resonances are described. First principles hybrid density functional calculations are performed on the Fermi contact shift (FCS) contributions of individual M–O–P pathways in the end members LFP and LCP and compared with the fitted values extracted from the LiFexCo1-xPO4 experimental data. Combining both data sets, the FCS for the range of local P environments expected in LiFexCo1-xPO4 have been calculated and used to assign the NMR spectra. Due to the additional unpaired electron in d6 Fe2+ as compared with d7 Co2+ (both high spin), LFP is expected to have larger Fermi contact shifts than LCP. However, two of the Co–O–P pathways in LCP give rise to noticeably larger shifts and the unexpected appearance of peaks outside the range delimited by the pure LFP and LCP 31P shifts. This behaviour contrasts with that observed previously in LiFexMn1-xPO4, where all 31P shifts lay within the LiMnPO4–LFP range. Although there are 24 distinct local P environments in LiFexCo1-xPO4, these group into seven resonances in the NMR spectra, due to significant overlap of the isotropic shifts. The local environments that give rise to the largest contributions to the spectral intensity are identified and used to simplify the assignment. This provides a tool for future studies of the electrochemically-cycled samples, which would otherwise be challenging to interpret.

36 MATERIALS SCIENCE↗

Tailoring Surface Acidity of Metal Oxide for Better Polysulfide Entrapment in Li‐S Batteries

The polysulfide shuttle reaction has severely limited practical applications of Li‐S batteries. Recently, functional materials that can chemically adsorb polysulfide show significant enhancement in cycling stability and Coulombic efficiency. However, the mechanism of the chemisorption and the control factors governing the chemisorption are still not fully understood. Here, it is demonstrated for the first time that the surface acidity of the host material plays a crucial role in the chemisorption of polysulfide. By tailoring the surface acidity of TiO 2 via heteroatom doping, the polysulfide‐TiO 2 interaction can be fortified and thus significantly the capacity fading be reduced to 0.04% per cycle. The discovery presented here sheds light on the mechanism of this interfacial phenomenon, and opens a new avenue that can lead to a practical sulfur/host composite cathode.

Wang, Xiwen↗

3D Graphitic Foams Derived from Chloroaluminate Anion Intercalation for Ultrafast Aluminum-Ion Battery

We present that a 3D graphitic foam vertically aligned graphitic structure and a low density of defects is derived through chloroaluminate anion intercalation of graphite followed by thermal expansion and electrochemical hydrogen evolution. Such aligned graphitic structure affords excellent Al-ion battery characteristics with a discharge capacity of ≈60 mA h g -1 under a high charge and discharge current density of 12 000 mA g -1 over ≈4000 cycles.

25 ENERGY STORAGE↗

Scalable Dry Printing Manufacturing to Enable Long-Life and High Energy Lithium-Ion Batteries

Slurry casting method dominates the electrode manufacture of lithium-ion batteries. The entire procedure is similar to the newspaper printing that includes premixing of cast materials into solvents homogeneously, and continuously transferring and drying the slurry mixture onto the current collector. As a market approaching US $80 billion by 2024, the optimization of manufacture process is crucial and attractive. However, the organic solvent remains irreplaceable in the wet method for making slurries, even though it is capital-intensive and toxic. In this paper, an advanced powder printing technique is demonstrated that is completely solvent-free and dry. Through removing the solvent and related procedures, this method is anticipated to statistically save 20% of the cost at a remarkably shortened production cycle (from hours to minutes). The dry printed electrodes outperform commercial slurry cast ones in 650 cycles (80% capacity retention in 500 cycles), and thick electrodes are successfully fabricated to increase the energy density. Furthermore, microscopy techniques are utilized to characterize the difference of electrode microstructure between dry and wet methods, and distinguish dry printing's advantages on controlling the microstructure. Finally, this study proves a practical fabrication method for lithium-ion electrodes with lowered cost and favorable performance, and allows more advanced electrode designs potentially.

25 ENERGY STORAGE↗

A New Strategy for High-Voltage Cathodes for K-Ion Batteries: Stoichiometric KVPO 4 F

The exploration of high-energy-density cathode materials is crucial to the practical use of K-ion batteries. Layered K-metal oxides have too high a voltage slope due to their large K + –K + interaction, resulting in low specific capacity and average voltage. In contrast, the 3D arrangement of K + , with polyanions separating them, reduces the strength of the effective K + -K + repulsion, which in turn increases specific capacity and voltage. Here, stoichiometric KVPO 4 F for use as a high-energy-density K-ion cathode is developed. The KVPO 4 F cathode delivers a reversible capacity of ≈105 mAh g -1 with an average voltage of ≈4.3 V (vs K/K + ), resulting in a gravimetric energy density of ≈450 Wh kg -1 . During electrochemical cycling, the K x VPO 4 F cathode goes through various intermediate phases at x = 0.75, 0.625, and 0.5 upon K extraction and reinsertion, as determined by ex situ X-ray diffraction characterization and ab initio calculations. Moreover, our research explains the role of oxygen substitution in KVPO 4+ x F 1- x : the oxygenation of KVPO 4 F leads to an anion-disordered structure which prevents the formation of K + /vacancy orderings without electrochemical plateaus and hence to a smoother voltage profile.

25 ENERGY STORAGE↗

In–Depth Analysis of the Degradation Mechanisms of High–Nickel, Low/No–Cobalt Layered Oxide Cathodes for Lithium–Ion Batteries

A rational compositional design of high-nickel, cobalt-free layered oxide materials for high-energy and low-cost lithium-ion batteries would be expected to further propel the widespread adoption of electric vehicles (EVs), yet a composition with satisfactory electrochemical properties has yet to emerge. The previous work has demonstrated a promising LiNi 0.883 Mn 0.056 Al 0.061 O 2 (NMA-89) composition that outperformed high-nickel, cobalt-containing analogs in cycling stability and maintained a comparable rate performance and thermal stability. Herein, the capacity fading mechanism of NMA-89 in a pouch full cell with a 4.2 V cutoff is compared to that of its cobalt-containing analogs. The results reveal that particle cracking in LiNi 0.89 Mn 0.055 Co 0.055 O 2 (NMC-89) and LiNi 0.883 Co 0.053 Al 0.064 O 2 (NCA-89) leads to a loss of active material and an increase in surface area, thereby exacerbating structural and surface instabilities, accelerating impedance and polarization growth, and ultimately reducing their capacity retentions. LiNi 0.89 Mn 0.044 Co 0.042 Al 0.013 Mg 0.011 O 2 (NMCAM-89) and NMA-89 experience subdued surface reactions and maintain spherical particle structures, both of which are conducive to their capacity retentions during long-term cycling. Furthermore, this investigation offers insights into how specific transition-metal ions dictate the electrochemical stability of high-Ni layered oxide cathode materials, highlights the benefit of Mn-Al combination in NMA-89, and presents potential strategies to further enhance the performance of this novel class of cathode materials.

degradation mechanisms↗

CuS and Cu 2 S as Cathode Materials for Lithium Batteries: A Review [A Review on CuS and Cu 2 S as Cathode Materials for Lithium Batteries]

Nowadays, lithium-ion batteries (LIBs) take a very important role for energy storage. LIBs are dominant in consumer electronics, and they have also entered the market of hybrid electric vehicles (HEVs), plug-in HEVs, and pure EVs. However, state-of-the-art LIBs are electrochemically intercalation-based and are still limited in energy density and power rates. To address these challenges and others (e. g. safety issues and cost), conversion-based copper sulfides (Cu x S, 1≤x≤2) have been investigated as alternative cathodes for improved electrochemical performance, that is, higher energy density, better cycling stability, and enhanced rate capability. In this paper, we summarize the recent research progress on Cu x S to gain a better understanding of the material's electrochemical mechanisms and develop feasible strategies for improving its performance.

25 ENERGY STORAGE↗

Toward MBenes Battery Electrode Materials: Layered Molybdenum Borides for Li-Ion Batteries

Lithium-ion and sodium-ion batteries (LIBs and SIBs) are crucial in our shift toward sustainable technologies. In this work, the potential of layered boride materials (MoAlB and Mo 2 AlB 2 ) as novel, high-performance electrode materials for LIBs and SIBs, is explored. It is discovered that Mo 2 AlB 2 shows a higher specific capacity than MoAlB when used as an electrode material for LIBs, with a specific capacity of 593 mAh g -1 achieved after 500 cycles at 200 mA g -1 . It is also found that surface redox reactions are responsible for Li storage in Mo 2 AlB 2 , instead of intercalation or conversion. Moreover, the sodium hydroxide treatment of MoAlB leads to a porous morphology and higher specific capacities exceeding that of pristine MoAlB. When tested in SIBs, Mo 2 AlB 2 exhibits a specific capacity of 150 mAh g -1 at 20 mA g -1 . These findings suggest that layered borides have potential as electrode materials for both LIBs and SIBs, and highlight the importance of surface redox reactions in Li storage mechanisms.

25 ENERGY STORAGE↗

Consolidation of composite cathodes with NCM and sulfide solid-state electrolytes by hot pressing for all-solid-state Li metal batteries

In this study, hot pressing was evaluated as a method of cell fabrication to increase the energy density of next-generation all-solid-state batteries with NCM active material and sulfide solid-state electrolyte. Hot pressing involves consolidating glassy sulfide electrolyte by the application of pressure at a temperature above the electrolyte’s glass transition temperature. Typically, cell stacks are formed at room temperature and retain 15–30% porosity that limits cell energy density. On the other hand, the porosity of hot-pressed cell stacks is reduced to less than 10%. The electrochemical function of hot-pressed cathode composites was assessed as a function of active material and solid-state electrolyte compositions. Specifically, LiNi 0.85 Co 0.10 Mn 0.05 O 2 and LiNi 0.6 Co 0.2 Mn 0.2 O 2 were studied in combination with either glassy Li 7 P 3 S 11 , glassy Li 3 PS 4 , or β-Li 3 PS 4 solid-state electrolytes. Cathode composites composed of LiNi 0.6 Co 0.2 Mn 0.2 O 2 and Li 3 PS 4 maintained the best function after hot pressing at 200 °C and 370 MPa for 10 min. It was found that LiNi 0.6 Co 0.2 Mn 0.2 O 2 ’s resistance to microcracking and the inherent stability of Li 3 PS 4 ’s fully de-networked local structure are critical to maintain good electrochemical function after hot pressing. Furthermore, the results of this study show that hot pressing reduces porosity in the cathode composite and confirms the feasibility of cathode support of consolidated, reinforced glass separators.

25 ENERGY STORAGE↗

Sizing battery energy storage and PV system in an extreme fast charging station considering uncertainties and battery degradation

In this paper, we present mixed integer linear programming (MILP) formulations to obtain optimal sizing for a battery energy storage system (BESS) and solar generation system in an extreme fast charging station (XFCS) to reduce the annualized total cost. The proposed model characterizes a typical year with eight representative scenarios and obtains the optimal energy management for the station and BESS operation to exploit the energy arbitrage for each scenario. Contrasting extant literature, this paper proposes a constant power constant voltage (CPCV) based improved probabilistic approach to model the XFCS charging demand for weekdays and weekends. This paper also accounts for the monthly and annual demand charges based on realistic utility tariffs. Furthermore, BESS life degradation is considered in the model to ensure no replacement is needed during the considered planning horizon. Different from the literature, this paper offers pragmatic MILP formulations to tally BESS charge/discharge cycles using the cumulative charge/discharge energy concept. McCormick relaxations and the Big-M method are utilized to relax the bi-linear terms in the BESS operational constraints. Finally, a robust optimization-based MILP model is proposed and leveraged to account for uncertainties in electricity price, solar generation, and XFCS demand. Case studies were performed to signify the efficacy of the proposed formulations.

24 POWER TRANSMISSION AND DISTRIBUTION↗