SEARCH · Engineering Papers

Results for “Autonomous research”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS2005

Meeting the Challenges of Exploration Systems: Health Management Technologies for Aerospace Systems With Emphasis on Propulsion

The constraints of future Exploration Missions will require unique Integrated System Health Management (ISHM) capabilities throughout the mission. An ambitious launch schedule, human-rating requirements, long quiescent periods, limited human access for repair or replacement, and long communication delays all require an ISHM system that can span distinct yet interdependent vehicle subsystems, anticipate failure states, provide autonomous remediation, and support the Exploration Mission from beginning to end. NASA Glenn Research Center has developed and applied health management system technologies to aerospace propulsion systems for almost two decades. Lessons learned from past activities help define the approach to proper ISHM development: sensor selection- identifies sensor sets required for accurate health assessment; data qualification and validation-ensures the integrity of measurement data from sensor to data system; fault detection and isolation-uses measurements in a component/subsystem context to detect faults and identify their point of origin; information fusion and diagnostic decision criteria-aligns data from similar and disparate sources in time and use that data to perform higher-level system diagnosis; and verification and validation-uses data, real or simulated, to provide variable exposure to the diagnostic system for faults that may only manifest themselves in actual implementation, as well as faults that are detectable via hardware testing. This presentation describes a framework for developing health management systems and highlights the health management research activities performed by the Controls and Dynamics Branch at the NASA Glenn Research Center. It illustrates how those activities contribute to the development of solutions for Integrated System Health Management.

Melcher, Kevin J.↗

NASA NTRS2007

NASA Range Safety Annual Report 2007

As always, Range Safety has been involved in a number of exciting and challenging activities and events. Throughout the year, we have strived to meet our goal of protecting the public, the workforce, and property during range operations. During the past year, Range Safety was involved in the development, implementation, and support of range safety policy. Range Safety training curriculum development was completed this year and several courses were presented. Tailoring exercises concerning the Constellation Program were undertaken with representatives from the Constellation Program, the 45th Space Wing, and the Launch Constellation Range Safety Panel. Range Safety actively supported the Range Commanders Council and it subgroups and remained involved in updating policy related to flight safety systems and flight safety analysis. In addition, Range Safety supported the Space Shuttle Range Safety Panel and addressed policy concerning unmanned aircraft systems. Launch operations at Kennedy Space Center, the Eastern and Western ranges, Dryden Flight Research Center, and Wallops Flight Facility were addressed. Range Safety was also involved in the evaluation of a number of research and development efforts, including the space-based range (formerly STARS), the autonomous flight safety system, the enhanced flight termination system, and the joint advanced range safety system. Flight safety system challenges were evaluated. Range Safety's role in the Space Florida Customer Assistance Service Program for the Eastern Range was covered along with our support for the Space Florida Educational Balloon Release Program. We hope you have found the web-based format both accessible and easy to use. Anyone having questions or wishing to have an article included in the 2008 Range Safety Annual Report should contact Alan Dumont, the NASA Range Safety Program Manager located at the Kennedy Space Center, or Michael Dook at NASA Headquarters.

Dumont, Alan G.↗

NASA NTRS2015

Advancing Lidar Sensors Technologies for Next Generation Landing Missions

Missions to solar systems bodies must meet increasingly ambitious objectives requiring highly reliable "precision landing", and "hazard avoidance" capabilities. Robotic missions to the Moon and Mars demand landing at pre-designated sites of high scientific value near hazardous terrain features, such as escarpments, craters, slopes, and rocks. Missions aimed at paving the path for colonization of the Moon and human landing on Mars need to execute onboard hazard detection and precision maneuvering to ensure safe landing near previously deployed assets. Asteroid missions require precision rendezvous, identification of the landing or sampling site location, and navigation to the highly dynamic object that may be tumbling at a fast rate. To meet these needs, NASA Langley Research Center (LaRC) has developed a set of advanced lidar sensors under the Autonomous Landing and Hazard Avoidance Technology (ALHAT) project. These lidar sensors can provide precision measurement of vehicle relative proximity, velocity, and orientation, and high resolution elevation maps of the surface during the descent to the targeted body. Recent flights onboard Morpheus free-flyer vehicle have demonstrated the viability of ALHAT lidar sensors for future landing missions to solar system bodies.

Amzajerdian, Farzin↗

NASA NTRS2008

Automated and Adaptive Mission Planning for Orbital Express

The Orbital Express space mission was a Defense Advanced Research Projects Agency (DARPA) lead demonstration of on-orbit satellite servicing scenarios, autonomous rendezvous, fluid transfers of hydrazine propellant, and robotic arm transfers of Orbital Replacement Unit (ORU) components. Boeing's Autonomous Space Transport Robotic Operations (ASTRO) vehicle provided the servicing to the Ball Aerospace's Next Generation Serviceable Satellite (NextSat) client. For communication opportunities, operations used the high-bandwidth ground-based Air Force Satellite Control Network (AFSCN) along with the relatively low-bandwidth GEO-Synchronous space-borne Tracking and Data Relay Satellite System (TDRSS) network. Mission operations were conducted out of the RDT&E Support Complex (RSC) at the Kirtland Air Force Base in New Mexico. All mission objectives were met successfully: The first of several autonomous rendezvous was demonstrated on May 5, 2007; autonomous free-flyer capture was demonstrated on June 22, 2007; the fluid and ORU transfers throughout the mission were successful. Planning operations for the mission were conducted by a team of personnel including Flight Directors, who were responsible for verifying the steps and contacts within the procedures, the Rendezvous Planners who would compute the locations and visibilities of the spacecraft, the Scenario Resource Planners (SRPs), who were concerned with assignment of communications windows, monitoring of resources, and sending commands to the ASTRO spacecraft, and the Mission planners who would interface with the real-time operations environment, process planning products and coordinate activities with the SRP. The SRP position was staffed by JPL personnel who used the Automated Scheduling and Planning ENvironment (ASPEN) to model and enforce mission and satellite constraints. The lifecycle of a plan began three weeks outside its execution on-board. During the planning timeframe, many aspects could change the plan, causing the need for re-planning. These variable factors, ranging from shifting contact times to ground-station closures and required maintenance times, are discussed along with the flexibility of the ASPEN tool to accommodate changes to procedures and the daily or long-range plan, which contributed to the success of the mission. This paper will present an introduction to ASPEN, a more in-depth discussion on its use on the Orbital Express mission, and other relative work. A description of ground operations after the SRP deliveries were made is included, and we briefly discuss lessons learned from the planning perspective and future work.

scheduling↗

NASA NTRS2017

Formal Assurance for Cognitive Architecture Based Autonomous Agent

Autonomous systems are designed and deployed in different modeling paradigms. These environments focus on specific concepts in designing the system. We focus our effort in the use of cognitive architectures to design autonomous agents to collaborate with humans to accomplish tasks in a mission. Our research focuses on introducing formal assurance methods to verify the behavior of agents designed in Soar, by translating the agent to the formal verification environment Uppaal.

Bhattacharyya, Siddhartha↗

NASA NTRS2018

Testing Enabling Technologies for Safe UAS Urban Operations

A set of more than 100 flight operations were conducted at NASA Langley Research Center using small UAS (sUAS) to demonstrate, test, and evaluate a set of technologies and an overarching air-ground system concept aimed at enabling safety. The research vehicle was tracked continuously during nominal traversal of planned flight paths while autonomously operating over moderately populated land. For selected flights, off-nominal risks were introduced, including vehicle-to-vehicle (V2V) encounters. Three contingency maneuvers were demonstrated that provide safe responses. These maneuvers made use of an integrated air/ground platform and two on-board autonomous capabilities. Flight data was monitored and recorded with multiple ground systems and was forwarded in real time to a UAS traffic management (UTM) server for airspace coordination and supervision.

Moore, Andrew J.↗

NASA NTRSDate not supplied

Initial Performance Evaluation of Flight Path Management Onboard Automation

Significant developments in automation are necessary to achieve safe and efficient operations in advanced aerial mobility related concepts. Urban Air Mobility (UAM) is rapidly growing, emerging field that poses a challenging use case with a tighter scale of operations compared to the traditional commercial transport paradigm. A large part of the challenge is the uncharted territory; as of this paper, no set of operational standards or guidelines for UAM operations have been established and automated en route operations for UAM level 4 (UML-4) have not been studied. Flight Path Management (FPM) automation provides a set of capabilities that are critical toward enabling airborne vehicles to achieve mission success while maintaining operational safety. An initial performance evaluation of FPM automation was conducted using a UAM-adapted version of the Autonomous Operations Planner (AOP), an onboard trajectory management capability developed over years of research targeting commercial transport operations, as its reference implementation. This paper describes the evaluation, including the approach and methodology for simulating FPM automation in UML-4, key results, future work, and conclusions.

flight path management↗

NASA NTRSDate not supplied

Initial Performance Evaluation of Flight Path Management Onboard Automation

flight path management↗

NASA NTRSDate not supplied

AmesDT: Digital Twin and Autonomy Validation Environment

A simulation of NASA Ames Research Center was developed to provide a common testbed for multiple areas of research within the Intelligent Systems Division, primarily related to verification and validation of autonomous technologies, machine learning, and digital twin systems. AmesSim corresponds a physical rover that is capable of navigation in the real-world environment; in this way, the same experiments can be run in both settings, with the same software and hardware stacks in the loop. The simulation is built in Unreal Engine 4 and uses the AirSim plugin for API convenience. Several custom modifications allow deterministic, faster-than-realtime execution, which enables consistent testing of on-line algorithms and large-scale data collection. This paper describes the architecture and capabilities of the simulation and discusses development challenge.

simulation↗

NASA NTRS2025

HabSim: A Modular Coupled Virtual Testbed for Simulating ExtraTerrestrial Habitat Systems

Extraterrestrial habitats involve a tightly coupled combination of hardware, software, and humans while operating in an unforgiving environment that poses many risks, both anticipated and unanticipated. Traditional approaches with such systems of systems focus on reliability, robustness, and redundancy. These approaches seek to avoid failure rather than reduce overall risk. However, faults are inevitable, and understanding and managing the complex and emergent behavior and cascading events of such a complex system is critical. This study describes the development of HabSim, a computational simulation environment intended to support research to establish the know-how to design and operate resilient and autonomous SmartHabs. HabSim is a modular virtual testbed composed of many of the coupled dynamic systems expected in a typical SmartHab. A heterogeneous set of interconnected physics-based and phenomenological models is used to represent the essential functions of a SmartHab. HabSim further considers disruptions and models damage and repair of certain components. This paper discusses a) system and subsystem requirements of the deep space habitat included in the HabSim platform; b) architectural choices made in response to the requirements; c) technical considerations for developing, verifying, configuring, and executing HabSim; and d) illustrative sample results from a simulation of a representative disruption scenario.

Mohsen Azimi↗

DOE OSTI2026

Synthetic data-driven deep learning for label-free autonomous atomic force microscopy

Atomic force microscopy (AFM) is a widely used tool for nanoscale characterization across materials science, energy research, and biology. However, its adoption in high-throughput materials discovery and statistically driven studies remains limited by a strong dependence on expert operator input and by the scarcity of annotated experimental AFM datasets needed to enable data-driven automation. Here, we introduce SimuScan, a synthetic-data–driven framework that enables reliable AFM feature identification, segmentation, and targeted imaging without requiring large manually labeled experimental datasets. SimuScan generates tunable, high-fidelity synthetic AFM images of defined morphologies while incorporating realistic experimental artifacts, including tip–sample convolution, noise, flattening distortions, and surface debris. These datasets are shown to support scalable, label-free training of modern deep learning models for AFM analysis. When integrated into data-driven AFM workflows, SimuScan-trained models can locate and analyze nanoscale structures across large datasets and guide targeted follow-up imaging. We validate this approach on nanostructured surfaces, DNA assemblies, and bacterial cells, demonstrating robust generalization across diverse sample types with minimal operator intervention. More broadly, this work establishes a general strategy for generating explicitly conditioned, task-relevant synthetic data to improve the reliability of downstream models in autonomous microscopy.

Millan-Solsona, Ruben [Oak Ridge National Laborato↗

NASA NTRS2016

Flight Analysis of an Autonomously Navigated Experimental Lander for High Altitude Recovery

First steps have been taken to qualify a family of parafoil systems capable of increasing the survivability and reusability of high-altitude balloon payloads. The research is motivated by the common risk facing balloon payloads where expensive flight hardware can often land in inaccessible areas that make them difficult or impossible to recover. The Autonomously Navigated Experimental Lander (ANGEL) flight test introduced a commercial Guided Parachute Aerial Delivery System (GPADS) to a previously untested environment at 108,000ft MSL to determine its high-altitude survivability and capabilities. Following release, ANGEL descended under a drogue until approximately 25,000ft, at which point the drogue was jettisoned and the main parachute was deployed, commencing navigation. Multiple data acquisition platforms were used to characterize the return-to-point technology performance and help determine its suitability for returning future scientific payloads ranging from 180 to 10,000lbs to safer and more convenient landing locations. This report describes the test vehicle design, and summarizes the captured sensor data. Various post-flight analyses are used to quantify the system's performance, gondola load data, and serve as a reference point for subsequent missions.

Parafoil↗

NASA NTRS2006

Simulation to Flight Test for a UAV Controls Testbed

The NASA Flying Controls Testbed (FLiC) is a relatively small and inexpensive unmanned aerial vehicle developed specifically to test highly experimental flight control approaches. The most recent version of the FLiC is configured with 16 independent aileron segments, supports the implementation of C-coded experimental controllers, and is capable of fully autonomous flight from takeoff roll to landing, including flight test maneuvers. The test vehicle is basically a modified Army target drone, AN/FQM-117B, developed as part of a collaboration between the Aviation Applied Technology Directorate (AATD) at Fort Eustis, Virginia and NASA Langley Research Center. Several vehicles have been constructed and collectively have flown over 600 successful test flights, including a fully autonomous demonstration at the Association of Unmanned Vehicle Systems International (AUVSI) UAV Demo 2005. Simulations based on wind tunnel data are being used to further develop advanced controllers for implementation and flight test.

Motter, Mark A.↗

NASA NTRS1991

Control of nausea and autonomic dysfunction with terfenadine, a peripherally acting antihistamine

Terfenadine (Seldane) was admisistered to 14 male subjects in a randomized, double-blinded, and cross-over design to assess the efficacy of this peripherally active antihistamine as an antimotion sickness drug. Terfenadine possesses practically no central side effects. A staircase profile test was administered 4 h following placebo or a single oral dose of terfenadine (300 mg). The study revealed a statistically significant therapeutic effect from terfenadine (p less than 0.05). This led to a conclusion that, because the drug does not or only poorly crosses the blood-brain barrier, a selective peripheral antihistamine action may be sufficient in the control of motion sickness induced through cross-coupled accelerative semicircular canal stimulation using a rotating chair. This finding implies that other peripherally acting agents might be found that possess even greater antimotion sickness efficacy. The present research raises additional questions regarding current theories on the etiology of motion sickness, its associated autonomic system dysfunction, and the validity of assumptions that effective pharmacological agents must act centrally.

Kohl, Randall L.↗

DOE OSTI2022

Secure mmWave Spectrum Sharing with Autonomous Beam Scheduling for 5G and Beyond

Spectrum Sharing (SS) has seen a renewed set of initiatives in 5G with the availability of shared and unlicensed spectrum bands that can be used by multiple cellular service providers and private cellular networks. Beam based transmission, instead of the traditional sector based transmission in conjunction with the spectrum agility of the 5G New Radio (NR) has brought new opportunities to optimized sharing of spectrum. Currently in the U.S., a centralized Spectrum Access Server (SAS) is used to co-ordinate spectrum sharing among networks sharing the same spectrum band. However, SAS becomes a focal point for security attacks and a performance bottleneck. In addition, SAS relies on an Environmental Sensor Network (ESN), separate from the 5G network. Without trusted spectral occupancy information, false reporting of spectrum sensing data can create sub-optimal and unfair spectrum usage. This paper summarizes our recent research findings in using a decentralized scheme for multiple networks to securely share spectrum with autonomous beam scheduling : 1) A new stochastic network framework based on Lyapunov Optimization approach is developed to optimize scheduling at the base stations; 2) Game theoretic (GT) approach is used to formulate the distributed scheduler; 3) Another distributed scheduler with Q-learning is presented that utilizes the Reinforcement Learning (RL) approach; 4) The performance and convergence rate of these distributed solutions to use shared and unlicensed spectrum are compared with existing solutions. Conditions under which the performance of these schedulers approach the theoretical upper bound, which is the performance possible with no interference among the operators sharing the spectrum, are presented; 5) The ability of a base station to use its own user equipment as sensors, for optimal spectrum sharing with base stations in other operator networks, is demonstrated to be an effective approach.

5G↗

NASA NTRS2002

Mission Applicability Assessment of Integrated Power Components and Systems

The need for smaller lightweight autonomous power systems has recently increased with the increasing focus on micro- and nanosatellites. Small area high-efficiency thin film batteries and solar cells are an attractive choice for such applications. The NASA Glenn Research Center, Johns Hopkins Applied Physics Laboratory, Lithium Power Technologies, MicroSat Systems, and others, have been working on the development of autonomous monolithic packages combining these elements or what are called integrated power supplies (IPS). These supplies can be combined with individual satellite components and are capable of providing continuous power even under intermittent illumination associated with a spinning or Earth orbiting satellite. This paper discusses the space mission applicability, benefits, and current development efforts associated with integrated power supply components and systems. The characteristics and several mission concepts for an IPS that combines thin-film photovoltaic power generation with thin-film lithium ion energy storage are described. Based on this preliminary assessment, it is concluded that the most likely and beneficial application of an IPS will be for small "nanosatellites" or in specialized applications serving as a decentralized or as a distributed power source or uninterruptible power supply.

Raffaelle, R. P.↗

NASA NTRSDate not supplied

Foundational Human-Autonomy Teaming Research and Development in Scalable Remotely Operated Advanced Air Mobility Operations: Research Model and Initial Work

To achieve the scalability envisioned for many Advanced Air Mobility (AAM) applications, uncrewed aerial system (UAS) concepts are being pursued with the goal of enabling fewer human operators to manage more increasingly autonomous vehicles. NASA’s Transformational Tools and Technologies – Revolutionary Aviation Mobility (T3-RAM) subproject has identified human-autonomy teaming (HAT) as a critical area of research required to support these operations. Under T3-RAM, the HAT Foundational Research Activity has been tasked with providing basic research to identify HAT and human-automation interaction (HAI) principles that can be used to achieve scalable multi-vehicle UAS operations. This paper first outlines a research model to produce ecologically relevant basic research, then contextualizes completed and planned research and development activities within this model. Proposed research threads are presented, along with their practical and theoretical implications.

Human-Autonomy Teaming↗

DOE OSTI2025

Secure API-Driven Research Automation to Accelerate Scientific Discovery

The Secure Scientific Service Mesh (S3M) provides API-driven infrastructure to accelerate scientific discovery through automated research workflows. By integrating near real-time streaming capabilities, intelligent workflow orchestration, and fine-grained authorization within a service mesh architecture, S3M enables secure and flexible programmatic access to high performance computing (HPC) resources. This framework allows intelligent agents and experimental facilities to dynamically provision resources and execute complex workflows, accelerating experimental lifecycles, and enabling AI-augmented autonomous science. S3M establishes a modern foundation for scientific computing infrastructure that significantly reduces traditional barriers between researchers, computational resources, and experimental facilities.

Skluzacek, Tyler [ORNL] (ORCID:0000000322424931)↗