Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Alloy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Ethanol Decomposition on Pd–Au Alloy Catalysts

The mechanisms of ethanol (EtOH) decomposition via C–C or C–O bond cleavage on alloy surfaces are currently not well understood. Here, we model EtOH decomposition on close-packed Pd–Au catalytic surfaces using density functional theory (DFT) calculations and derived Brønsted–Evans–Polanyi (BEP) relationships. Three characteristic Pd–Au surfaces are considered, Pd 1 Au 2 (111), Pd 2 Au 1 (111), and a Pd monolayer (ML), Pd ML (111), on a Au substrate. We show that, on close-packed Pd–Au surfaces, the C–C bond is easier to cleave than C–O, indicating that the formation of CH 4 and CO is favored as the products of EtOH decomposition. Interestingly, we find that, though the C–C and C–O activation barriers on Pd ML (111) are generally lower than those on the other two surfaces, it is less active for EtOH decomposition due to a slow release of H 2 and possible carbon coking. Pd 2 Au 1 (111), on the other hand, has a higher theoretical reaction rate due to facile H 2 evolution from the surface and less carbon coking. A comparison of the surface d-band with the activation energy barriers shows that there is a trade-off between the barriers for C–C bond cleavage and H 2 association, with Pd 2 Au 1 (111) having the best performance. Temperature-programmed desorption experiments of EtOH on Pd/Au surfaces show significant C–C bond cleavage and both CH 4 and CO production on surfaces with Pd–Au interface sites. Furthermore, neither Auger electron spectroscopy nor EtOH reflection–adsorption infrared spectroscopy provide evidence of C–O bond cleavage. Finally, the experimental reaction rate for methane production from C–C bond cleavage was higher on surfaces with more Au present due to minimal carbon contamination and the promotion of product desorption. This combined theoretical and experimental study shows that, though Au is catalytically inactive for EtOH decomposition, it can dramatically promote the surface activity for EtOH steam reforming due to the existence of active Pd–Au surface ensemble sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic restructuring drives catalytic activity on nanoporous gold–silver alloy catalysts

Bimetallic, nanostructured materials hold promise for improving catalyst activity and selectivity, yet little is known about the dynamic compositional and structural changes that these systems undergo during pretreatment that leads to efficient catalyst function. Here we use ozone-activated silver–gold alloys in the form of nanoporous gold as a case study to demonstrate the dynamic behaviour of bimetallic systems during activation to produce a functioning catalyst. We show that it is these dynamic changes that give rise to the observed catalytic activity. Advanced in situ electron microscopy and X-ray photoelectron spectroscopy are used to demonstrate that major restructuring and compositional changes occur along the path to catalytic function for selective alcohol oxidation. Transient kinetic measurements correlate the restructuring to three types of oxygen on the surface. The direct influence of changes in surface silver concentration and restructuring at the nanoscale on oxidation activity is demonstrated. Finally, our results demonstrate that characterization of these dynamic changes is necessary to unlock the full potential of bimetallic catalytic materials.

36 MATERIALS SCIENCE↗

Trends in methanol decomposition on transition metal alloy clusters from scaling and Brønsted–Evans–Polanyi relationships

A combination of first principles Density Functional Theory calculations and thermochemical scaling relationships are employed to estimate the thermochemistry and kinetics of methanol decomposition on unsupported subnanometer metal clusters. The approach uses binding energies of various atomic and molecular species, determined on the pure metal clusters, to develop scaling relationships that are then further used to estimate the methanol decomposition thermodynamics for a series of pure and bimetallic clusters with four atoms per cluster. Additionally, activation energy barriers are estimated from Brønsted–Evans–Polanyi plots relating transition and final state energies on these clusters. The energetic results are combined with a simple, microkinetically-inspired rate expression to estimate reaction rates as a function of important catalytic descriptors, including the carbon and atomic oxygen binding energies to the clusters. Finally, based on these analyses, several alloy clusters are identified as promising candidates for the methanol decomposition reaction.

Environmental Molecular Sciences Laboratory↗

Effects of non-hydrostaticity and grain size on the pressure-induced phase transition of the CoCrFeMnNi high-entropy alloy

Recently, an irreversible polymorphic transition from face-centered cubic to hexagonal close-packing was surprisingly observed under high pressure in the prototype CoCrFeMnNi high-entropy alloys (HEAs) by various research groups. This unexpected phase transition brings new insights into the stability of HEAs, and its irreversibility stimulates exploration for new HEAs via high-pressure compression synthesis. However, the onset pressure for the phase transition was reported to fluctuate over a vast range from ~7 to above 49 GPa in the reported experiments. The reason for this inconsistency remains unclear and puzzles the HEA community. To address this problem, this work systematically investigates the effects of non-hydrostaticity and grain size. Our results demonstrate that larger deviatoric stress induced by the non-hydrostaticity of the pressure medium and larger grain size of the initial sample can both promote a phase transition and, therefore, considerably depress the onset pressure.

36 MATERIALS SCIENCE↗

Phase transformations of Al-bearing high-entropy alloys Al x CoCrFeNi (x = 0, 0.1, 0.3, 0.75, 1.5) at high pressure

Pressure-induced structural modifications in high-entropy alloys with varying Al contents, Al x CoCrFeNi (x = 0, 0.1, 0.3, 0.75, 1.5), have been investigated at pressures up to ~50 GPa by synchrotron X-ray diffraction and, following depressurization, by transmission electron microscopy (TEM). In Al x CoCrFeNi compounds with x ≤ 0.3, all of which exhibit an initial single-phase face-centered cubic (fcc) structure, proportionality between the Al content and the critical pressure for transformation to hexagonal close-packed (hcp) phases, distinguished by a distinct planar stacking sequence, is observed. This is attributed to the structural distortion arising from the large size of Al atoms relative to those of the other constituent elements, which results in an increase in the formation energy of stacking faults and a decrease in compressibility. High-resolution TEM results demonstrate variation of the stacking sequence from ABCABC, typical of fcc materials, to ABABAB, typical of hcp materials, in CoCrFeNi following high pressure. In Al 0.75 CoCrFeNi, which exhibits an initial dual-phase structure [fcc and body-centered cubic (bcc)], the result again shows the formation of a (hcp) phase despite its higher Al content, suggesting that the bcc phase may be more amenable to pressure-induced phase modification than is the fcc phase, which is absent for lower Al contents. However, the trend of transformation inhibition by increasing the Al content is again observed, with Al 1.5 CoCrFeNi retaining its initial structure up to the highest pressure achieved. Furthermore the determination of these compositional trends in the high-pressure phase response of these materials may enable the production of new phase mixtures with precisely tuned phase proportions and potentially desirable properties.

36 MATERIALS SCIENCE↗

Reaction Rate Enhancement for Cu(In,Ga)Se 2 Absorber Materials Using Ag-Alloying

The addition of Ag to Cu-Ga-In precursors for synthesizing (Ag,Cu)(In,Ga)Se 2 (ACIGS) thin films has shown benefits including improved adhesion, greater process tolerance, and potential for improved device performance. In this study, reaction pathways to form Cu(In,Ga)Se 2 (CIGS) and ACIGS were studied by time-progressive reactions at 450 °C in a 5% Ar/H 2 Se atmosphere followed by ex situ characterization. Results indicated that the addition of 25% Ag/(Ag+Cu) to the CIGS film reduces the reaction time by 50%. X-ray diffraction (XRD) analysis of CIGS films showed that the CuInSe 2 phase initially formed after 3.5 min. The slow reaction of the stable γ-Cu 9 (In,Ga) 4 phase, however, required more than 20 min to complete. Importantly, the addition of Ag to the CIGS film accelerated the reaction. Energy-dispersive X-ray spectroscopy shows that Ga/(Ga+In) grading occurs in the first 10 min of the reaction. XRD analysis showed that the chalcopyrite phase fully forms after 10 min and no significant changes were observed in samples selenized from 10-45 min. Reaction pathways of Ag-alloyed films were further characterized using in situ high temperature XRD analysis. The onset temperature of Se reaction was detected at 230 °C and a AgIn 2 phase transformation to (Ag,Cu)In 2 occurred during the early stage of the reaction.

36 MATERIALS SCIENCE↗

Patterning corrosion-susceptible metallic alloys for digital image correlation in a scanning electron microscope: Patterning corrosion susceptible alloys for SEM-DIC

Here we investigate the self-assembly of gold nanoparticles on the surface of magnesium functionalized with 3-(aminopropyl)trimethoxysilane or 3-(mercaptopropyl)trimethoxysilane. These nanoparticles served as a speckle pattern for high magnification deformation tracking via digital image correlation combined with scanning electron microscopy. Controlling the pH of the gold nanoparticle suspension to a specific basicity passivated corrosion in magnesium and in three of its alloys to enable proper nanoparticle bonding and self-assembly. Magnesium was used as a model material as it is particularly difficult to modify for self-assembly because of its propensity to quickly form a thick oxide, hydroxide, and carbonate layer in the presence of oxygen, water, and carbon dioxide, respectively. Moreover, it corrodes in acidic and slightly basic solutions, further complicating the self-assembly process. Due to these difficulties, the successful self-assembly of nanoparticles on magnesium has not previously been reported, to the best of the authors' knowledge. This technique is potentially amendable to other corrosion-susceptible materials. Gold nanoparticles were self-assembled in a uniformly dispersed random distribution on pure cast magnesium, cast AM60 (Mg-6Al-0.5Mn), rolled WE43 (Mg-4Y-3Nd/Gd), and extruded ZE20 (Mg-2Zn-0.2Ce).

36 MATERIALS SCIENCE↗

Quantifying and Qualifying Alloys Based on Level of Homogenization: A U-10Mo Alloy Case Study

Homogenization heat treatment is performed to attain uniformity in microstructure which is helpful to achieve the desired workability and microstructure in final products and, eventually, to gain predictive and consistent performance. Fabrication of low-enriched uranium alloys with 10 wt% molybdenum (U-10Mo) fuel plates involves multiple thermomechanical processing steps. It is well known that the molybdenum homogeneity in the final formed product affects the performance in the nuclear reactor. Here, to ensure uniform homogenization, a statistical method is proposed to quantify and characterize the molybdenum concentration variation in U-10Mo fuel plates by analyzing the molybdenum concentration measurement data from scanning electron microscopy energy dispersive spectroscopy line-scan. Statistical tolerance intervals (TI) are employed to determine the qualification of the U-10Mo fuel plate. We formulate an argument for the minimum number of independent samples to define fuel plate qualification if no molybdenum measurement data are available in advance and demonstrate that the given TI requirements can be equivalently reduced to a sample variance criterion in this application. The outcome of the statistical analysis can be used to optimize casting design and eventually increase productivity and reduce fabrication costs. The statistical strategy developed in this paper can be implemented for other applications especially in the field of material manufacturing to assess qualification requirements and monitor and improve the process design.

36 MATERIALS SCIENCE↗

From one to three, exploring the rungs of Jacob’s ladder in magnetic alloys

Magnetic systems represent an important challenge for electronic structure methods, in particular Density Functional Theory (DFT), which uses a single determinant wavefunction. To assess the predictions obtained by DFT in this type of materials, we benchmark different exchange correlation functionals with respect to each other, and with respect to available experimental data, on two families of binary iron alloys which are metallic and magnetic. We climb three rungs in Jacob’s ladder of DFT (i) the local density approximation, (ii) the industry standard approximation due to Perdew, Burke and Ernzerhof, and the revised version for solids, PBEsol (iii) and finally a very accurate meta-GGA functional SCAN, which corresponds to the third rung. More than 350 structures in ferromagnetic and antiferromagnetic configurations were considered. We compare the Convex Hull, the calculated magnetic moment, crystal structure, formation energy and electronic gap if present. We conclude that none of the functionals work in all conditions: whereas PBE and PBEsol can give a fair description of the crystal structure and the energetics, SCAN strongly overestimates the formation energy – giving values which are at least twice as large as PBE (and experiment). Magnetic moments are better predicted by PBE as well. Finally, our results show that magnetic and strongly correlated materials are a tough litmus test for DFT, and that they represent the next frontier in the development of a truly universal exchange correlation functionals.

Romero, Aldo H.↗

Exploiting Commonly-Reported Age-Hardening Data and Discovering Systematics Across Metallic Alloys and Alloy Systems to Identify Corrosion’s Most Influential Factors

This work explored ways to data mine legacy literature and predict solid-solid precipitation in support of simpler assessment of corrosion propensity in metallic alloys. Of interest was locating the peak age watershed (maximum hardness or strength), beyond which lies the regime termed “overaging.” A diligent search of literature and reference books, discussions with SMEs, and application of various algorithms showed that none of the premises going in held up to scrutiny.

36 MATERIALS SCIENCE↗

ZnO-Au x Cu 1-x Alloy and ZnO-Au x Al 1-x Alloy Vertically Aligned Nanocomposites for Low-Loss Plasmonic Metamaterials

Hyperbolic metamaterials are a class of materials exhibiting anisotropic dielectric function owing to the morphology of the nanostructures. In these structures, one direction behaves as a metal, and the orthogonal direction behaves as a dielectric material. Applications include subdiffraction imaging and hyperlenses. However, key limiting factors include energy losses of noble metals and challenging fabrication methods. In this work, self-assembled plasmonic metamaterials consisting of anisotropic nanoalloy pillars embedded into the ZnO matrix are developed using a seed-layer approach. Alloys of Au x Al 1-x or Au x Cu 1-x are explored due to their lower losses and higher stability. Optical and microstructural properties were explored. The ZnO-Au x Cu 1-x system demonstrated excellent epitaxial quality and optical properties compared with the ZnO-Au x Al 1-x system. Both nanocomposite systems demonstrate plasmonic resonance, hyperbolic dispersion, low losses, and epsilon-near-zero permittivity, making them promising candidates towards direct photonic integration.

36 MATERIALS SCIENCE↗