Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Active matter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Enhancing the Electrocatalysis of LiNi 0.5 Co 0.2 Mn 0.3 O 2 by Introducing Lithium Deficiency for Oxygen Evolution Reaction

LiNi 0.5 Co 0.2 Mn 0.3 O 2 (NCM523), as a cathode material for rechargeable lithium-ion batteries, has attracted considerable attention and been successfully commercialized for decades. NCM is also a promising electrocatalyst for the oxygen evolution reaction (OER), and the catalytic activity is highly correlated to its structure. In this paper, we successfully obtain NCM523 with three different structures: spinel NCM synthesized at low temperature (LT-NCM), disordered NCM (DO-NCM) with lithium deficiency obtained at high temperature, and layered hexagonal NCM at high temperature (HT-NCM). By introducing lithium deficiency to tune the valence state of transition metals in NCM from Ni 2+ to Ni 3+ , DO-NCM exhibits the best catalytic activity with the lowest onset potential (~1.48 V) and Tafel slope (~85.6 mV dec -1 ), whereas HT-NCM exhibits the worst catalytic activity with the highest onset potential (~1.63 V) and Tafel slope (~241.8 mV dec -1 ).

36 MATERIALS SCIENCE↗
DOE OSTI2020

Topological energy barrier for skyrmion lattice formation in MnSi

We report the direct measurement of the topological skyrmion energy barrier through a hysteresis of the skyrmion lattice in the chiral magnet MnSi. Measurements were made using small-angle neutron scattering with a custom-built resistive coil to allow for high-precision minor hysteresis loops. The experimental data were analyzed using an adapted Preisach model to quantify the energy barrier for skyrmion formation and corroborated by the minimum-energy path analysis based on atomistic spin simulations. Here, we reveal that the skyrmion lattice in MnSi forms from the conical phase progressively in small domains, each of which consisting of hundreds of skyrmions, and with an activation barrier of several eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Competition between energy- and entropy-driven activation in glasses

In simplified models of glasses we clarify the existence of two different kinds of coexisting activated dynamics, with one of the two dominating over the other. One is the energy barrier hopping that is typically used to understand activation, and the other, which we call entropic activation, is driven by the scarcity of convenient directions in phase space. When entropic activation dominates, the height of the energy barriers is no longer the primary factor governing the system's slowdown. In our analysis, dominance of one mechanism over the other depends on temperature and the shape of the density of states. Herein, we also find that at low temperatures a phase transition between the two kinds of activation can occur. Our observations are used to provide a scenario that can harmonize the facilitation and thermodynamic pictures of the slowdown of glasses into a single description.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Review of condensed matter laser cooling using electric-dipole-allowed transitions

The cooling of solids via laser-excited anti-Stokes luminescence has reached the cryogenic regime and is now being considered for several applications that benefit from vibration-free cryogenic refrigeration. 4f-4f transitions in rare-earth-doped crystals with low phonon energies currently offer the best laser-cooling performance. These transitions, however, are electric-dipole (ED) forbidden and thus have low cross sections, limiting the minimum achievable temperatures in practical materials to the 50–100 K regime. In contrast, ED-allowed transitions may offer greater cross sections and potentially enable lower minimum temperatures or more compact devices. The search for laser cooling with ED-allowed transitions has been an active field of research over the past decades with a wide variety of materials having been studied. This paper reviews the fundamentals of solid-state laser cooling, provides a preliminary theoretical assessment showing that laser-cooling with ED-allowed transitions is in principle possible, and reviews the experimental results reported to date. While cooling with ED-allowed transitions has not yet been realized in the solid state, the existing experimental body of work along with the theoretical considerations presented here suggest that further research on this topic may be fruitful.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Microtopography Matters: Belowground CH 4 Cycling Regulated by Differing Microbial Processes in Peatland Hummocks and Lawns

Water table depth and vegetation are key controls of methane (CH 4 ) emissions from peatlands. Microtopography integrates these factors into features called microforms. Microforms often differ in CH 4 emissions, but microform-dependent patterns of belowground CH 4 cycling remain less clearly resolved. Here, to investigate the impact of microtopography on belowground CH 4 cycling, we characterized depth profiles of the community composition and activity of CH 4 -cycling microbes using 16S rRNA amplicon sequencing, incubations, and measurements of porewater CH 4 concentration and isotopic composition from hummocks and lawns at Sallie's Fen in NH, USA. Geochemical proxies of methanogenesis and methanotrophy indicated that microforms differ in dominant microbial CH 4 cycling processes. Hummocks, where water table depth is lower, had higher porewater redox potential (Eh) and higher porewater δ 13 C-CH 4 values in the upper 30 cm than lawns, where water table depth is closer to the peat surface. Porewater δ 13 C-CH 4 and δD-CH 3 D values were highest at the surface of hummocks where the ratio of methanotrophs to methanogens was also greatest. These results suggest that belowground CH 4 cycling in hummocks is more strongly regulated by methanotrophy, while in lawns methanogenesis is more dominant. We also investigated controls of porewater CH 4 chemistry. The ratio of the relative abundance of methanotrophs to methanogens was the strongest predictor of porewater CH 4 concentration and δ 13 C-CH 4 , while vegetation composition had minimal influence. As microbial community composition was strongly influenced by redox conditions but not vegetation, we conclude that water table depth is a stronger control of belowground CH 4 cycling across microforms than vegetation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Simulating Global Terrestrial Carbon and Nitrogen Biogeochemical Cycles With Implicit and Explicit Representations of Soil Microbial Activity

Abstract Nutrient limitation is widespread in terrestrial ecosystems. Accordingly, representations of nitrogen (N) limitation in land models typically dampen rates of terrestrial carbon (C) accrual, compared with C‐only simulations. These previous findings, however, rely on soil biogeochemical models that implicitly represent microbial activity and physiology. Here we present results from a biogeochemical model testbed that allows us to investigate how an explicit versus implicit representation of soil microbial activity, as represented in the MIcrobial‐MIneral Carbon Stabilization (MIMICS) and Carnegie‐Ames‐Stanford Approach (CASA) soil biogeochemical models, respectively, influence plant productivity, and terrestrial C and N fluxes at initialization and over the historical period. When forced with common boundary conditions, larger soil C pools simulated by the MIMICS model reflect longer inferred soil organic matter (SOM) turnover times than those simulated by CASA. At steady state, terrestrial ecosystems experience greater N limitation when using the MIMICS‐CN model, which also increases the inferred SOM turnover time. Over the historical period, however, warming‐induced acceleration of SOM decomposition over high latitude ecosystems increases rates of N mineralization in MIMICS‐CN. This reduces N limitation and results in faster rates of vegetation C accrual. Moreover, as SOM stoichiometry is an emergent property of MIMICS‐CN, we highlight opportunities to deepen understanding of sources of persistent SOM and explore its potential sensitivity to environmental change. Our findings underscore the need to improve understanding and representation of plant and microbial resource allocation and competition in land models that represent coupled biogeochemical cycles under global change scenarios.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Thermoelectric response and entropy of fractional quantum Hall systems

In this work, we study the thermoelectric transport properties of fractional quantum Hall systems based on an exact diagonalization calculation. Based on the relation between the thermoelectric response and thermal entropy, we demonstrate that thermoelectric Hall conductivity $α_{xy}$ has power-law scaling $α_{xy} ∝ T^η$ for gapless composite Fermi-liquid states at filling numbers $\textit{ν}$ = 1/2 and 1/4 at low temperatures ($\textit{T}$), with an exponent η ~ 0.5 distinctly different from Fermi liquids. The power-law scaling remains unchanged for different forms of interaction including Coulomb and short-range ones, demonstrating the robustness of non-Fermi-liquid behavior of these interacting systems at low $\textit{T}$. In contrast, for the 1/3 fractional quantum Hall state, $α_xy$ vanishes at low $\textit{T}$ with an activation gap associated with neutral collective modes rather than charged quasiparticles. Our results establish another manifestation of the non-Fermi-liquid nature of quantum Hall fluids at a finite temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Nucleation of Dislocations in 3.9 nm Nanocrystals at High Pressure

As circuitry approaches single nanometer length scales, it has become important to predict the stability of single nanometer-sized metals. The behavior of metals at larger scales can be predicted based on the behavior of dislocations, but it is unclear if dislocations can form and be sustained at single nanometer dimensions. Here, we report the formation of dislocations within individual 3.9 nm Au nanocrystals under nonhydrostatic pressure in a diamond anvil cell. We used a combination of x-ray diffraction, optical absorbance spectroscopy, and molecular dynamics simulation to characterize the defects that are formed, which were found to be surface-nucleated partial dislocations. These results indicate that dislocations are still active at single nanometer length scales and can lead to permanent plasticity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Dielectric Relaxation by Quantum Critical Magnons

We report the experimental observation of dielectric relaxation by quantum critical magnons. Complex capacitance measurements reveal a dissipative feature with a temperature-dependent amplitude due to low-energy lattice excitations and an activation behavior of the relaxation time. The activation energy softens close to a field-tuned magnetic quantum critical point at H = H c and follows single-magnon energy for H > H c , showing its magnetic origin. Furthermore, our study demonstrates the electrical activity of coupled low-energy spin and lattice excitations, an example of quantum multiferroic behavior.

1-dimensional spin chains↗
DOE OSTI2022

The development and use of decision support framework for informing selection of select agent toxins with modelling studies to inform permissible toxin amounts

Many countries have worked diligently to establish and implement policies and processes to regulate high consequence pathogens and toxins that could have a significant public health impact if misused. In the United States, the Antiterrorism and Effective Death Penalty Act of 1996 (Public Law 104-132, 1996), as amended by the Bioterrorism Preparedness and Response Act of 2002 (Public Law 107-188, 2002) requires that the Department of Health and Human Services (HHS) [through the Centers for Disease Control and Prevention (CDC)] establish a list of bacteria, viruses, and toxins that have the potential to pose a severe threat to public health and safety. Currently, this list is reviewed and updated on a biennial basis using input from subject matter experts (SMEs). We have developed decision support framework (DSF) approaches to facilitate selection of select toxins and, where toxicity data are known, conducted modelling studies to inform selection of toxin amounts that should be excluded from select agent regulations. Exclusion limits allow laboratories to possess toxins under an established limit to support their research or teaching activities without the requirement to register with the Federal Select Agent Program. Fact sheets capturing data from a previously vetted SME workshop convened by CDC, literature review and SME input were developed to assist in evaluating toxins using the DSF approach. The output of the DSF analysis agrees with the current select toxin designations, and no other toxins evaluated in this study were recommended for inclusion on the select agent and toxin list. To inform the selection of exclusion limits, attack scenarios were developed to estimate the amount of toxin needed to impact public health. Scenarios consisted of simulated aerosol releases of a toxin in high-population-density public facilities and the introduction of a toxin into a daily consumable product supply chain. Using published inhalation and ingestion median toxic dose (TD 50 ) and median lethal dose (LD 50 ) values, where available, a range of toxin amounts was examined to estimate the number of people exposed to these amounts in these scenarios. Based on data generated by these models, we proposed toxin exclusion values corresponding to levels below those that would trigger a significant public health response (i.e., amounts estimated to expose up to ten people by inhalation or one hundred people by ingestion to LD 50 or TD 50 levels of toxin in the modeled scenarios).

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Using Radioiodine Speciation to Address Environmental Remediation and Waste Stream Sequestration Problems at the Fukushima Daiichi Nuclear Power Plant and a DOE Site

Iodine-129 ( 129 I), with a half-life of half-life of 16 million years, is commonly considered the single greatest risk driver in high-level and low-level nuclear repositories. This risk stems from several basic properties of 129 I, and under many geochemical conditions, it can move as an anion at nearly the rate of water through the subsurface environment. 129 I is also extremely radiologically toxic because over 90% of body burden accumulates in the thyroid, which weighs only about 14g in an adult. There is also a large worldwide inventory of radioiodine as a result of its high fission yield and this inventory is rapidly increasing as a result of nuclear energy production. Radioiodine is produced at a rate of 40 GBq (1 Ci) per gigawatt of electricity produced by nuclear power. To illustrate how the properties of 129 I magnify its risk, 129 I accounts for only 0.00002% of the radiation released from the Savannah River Site in Aiken, South Carolina, but contributes 13% of the population dose, a six orders of magnitude magnification of risk with respect to its radioactivity. The currently favored solid phase for LLW immobilization is cement, while HLW immobilization is the incorporation of waste into glass (vitrification). However, so far, the incorporation into cement and subsequent leaching of only iodide has been seriously investigated. The major problem with this approach is that it ignores the complex speciation of iodine, i.e., it ignores iodate and organo-iodine which have different chemistries. Most of the past research was devoted to the mechanism of iodide uptake in cement hydrate phases that is sorption and/or incorporation. Very few data exist on iodate and organo-iodine incorporation in cement, even though large quantities of liquid waste containing also radioiodine have already been solidified in cement Iodine-129 from low-level waste is commonly disposed of in cementitious materials. Grout, a dense cementitious fluid, mixed with a reducing slag, is often used to immobilize radionuclides. However, the reducing environment might not be conducive to immobilize iodine. For example, the silver based immobilization technologies (e.g., AgCl, Ag-impregnated granular activated carbon, Ag-mordenite) remove iodine from the aqueous phase by promoting the formation of Ag-iodide precipitates. The solubility of AgI is eight orders of magnitude lower than it is for AgIO 3 . Similarly, coprecipitation of iodine into calcium carbonate phases occurs only with IO 3 - and not with I - and org-I. If one would want to immobilize iodine more effectively, different engineering approaches would need to be used to promote binding of I - , IO 3 - , or organo-I. Using laboratory experiments with grout, slag, and silver-based adsorbents, and GC-MS and I K-edge XANES and EXAFS and C K-edge XANES spectroscopy for identifying iodine speciation, the major problems with these methods have been identified as focused too much on just one of the iodine species for immobilization, while others, especially organo-I, remained mobile. Finally, we established that most of the adsorbents that are used contain sufficient amounts of organic matter to create organo-I . It is anticipated that increased attention directed at understanding and quantifying the speciation of radioiodine, as opposed to simply total radioiodine, will lead to improved remediation results to be used for long-term radioiodine disposal in cementitious waste forms.

129-Iodine↗
DOE OSTI2023

Organic sulfur from source to sink in low‐sulfate Lake Superior

Abstract Organic sulfur plays a crucial role in the biogeochemistry of aquatic sediments, especially in low sulfate (< 500 μ M) environments like freshwater lakes and the Earth's early oceans. To better understand organic sulfur cycling in these systems, we followed organic sulfur in the sulfate‐poor (< 40 μ M) iron‐rich (30–80 μ M) sediments of Lake Superior from source to sink. We identified microbial populations with shotgun metagenomic sequencing and characterized geochemical species in porewater and solid phases. In anoxic sediments, we found an active sulfur cycle fueled primarily by oxidized organic sulfur. Sediment incubations indicated a microbial capacity to hydrolyze sulfonates, sulfate esters, and sulfonic acids to sulfate. Gene abundances for dissimilatory sulfate reduction ( dsrAB ) increased with depth and coincided with sulfide maxima. Despite these indicators of sulfide formation, sulfide concentrations remain low (< 40 nM) due to both pyritization and organic matter sulfurization. Immediately below the oxycline, pyrite accounted for 13% of total sedimentary sulfur. Both free and intact lipids in this same interval accumulated disulfides, indicating rapid sulfurization even at low concentrations of sulfide. Our investigation revealed a new model of sulfur cycling in a low‐sulfate environment that likely extends to other modern lakes and possibly the ancient ocean, with organic sulfur both fueling sulfate reduction and consuming the resultant sulfide.

Phillips, Alexandra A.↗
DOE OSTI2021

Solid particulate mass and number from ducted fuel injection in an optically accessible diesel engine in skip-fired operation

Ducted fuel injection (DFI) is a new combustion strategy that has been shown to significantly attenuate soot formation in diesel engines. While previous studies have used optical diagnostics and optical filter smoke number methods to show that DFI reduces in-cylinder soot formation and engine-out soot emissions, respectively, this is the first study to measure solid particle number (PN) emissions in addition to particle mass (PM). Furthermore, this study quantitatively evaluates the use of transient particle instruments for measuring particles from skip-fired operation in an optical single cylinder research engine (SCRE). Engine-out PN was measured using an engine exhaust particle sizer following a catalytic stripper, and PM was measured using a photoacoustic analyzer. The study improves on earlier preliminary emissions studies by clearly showing that DFI reduces overall PM by 76%–79% and PN for particles larger than 23 nm by 77% relative to conventional diesel combustion at a 1200-rpm, 13.3-bar gross indicated mean effective pressure operating condition. The degree of engine-out PM reduction with DFI was similar across both particulate measurement instruments used in the work. Through the use of bimodal distribution fitting, DFI was also shown to reduce the geometric mean diameter of accumulation mode particles by 26%, similar to the effects of increased injection pressure in conventional diesel combustion systems. This work clearly shows the significant solid particulate matter reductions enabled by DFI while also demonstrating that engine-out PN can be accurately measured from an optical SCRE operating in a skip-fired mode. Based on these results, it is believed that DFI has the potential to enable fuel savings when implemented in multi-cylinder engines, both by lowering the required frequency of active diesel particulate filter regeneration, and by reducing the backpressure imposed by exhaust filtration systems.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Data for Zheng et al. (2025), "AquaMEND: Reconciling multiple impacts of salinization on soil carbon biogeochemistry"

Soil salinization, exacerbated by climate change, poses a global threat to coastal ecosystems and soil function. Salinity affects soil carbon cycling by directly impacting microbial activity and indirectly altering soil physicochemical properties, but current models inadequately represent these complexities. This dataset contains the observational and modeling data from Zheng et al. (2025), which described a process-based modeling framework that couples soil solution chemistry with microbial carbon cycling reactions to study the impacts of soil salinization. This conceptual model is implemented numerically into the open-source geochemical program PHREEQC 3.0 (Parkhurst and Appelo, 2013). This dataset consists of: - Figure2_AquaMEND_salinity_buffer: Contains model simulation outputs to assess the impact of three different cation exchange and surface complexation processes on salinity buffering (Fig. 2 from Zheng et al. 2025). - Figure3_Salinity_function: Contains salinity function fitting for literature data (Fig. 3 from Zheng et al. 2025). - Figure4_AquaMEND_microbial_mechanisms: Contains model simulation outputs for testing various microbial process-based hypotheses related to soil salinization, including microbial mortality, carbon use efficiency (CUE), extracellular enzyme activity, and other microbial mechanisms (Fig. 4 from Zheng et al. 2025). - Figure5_AquaMEND_Redox: Contains on model simulation outputs to evaluate shifts among key redox processes, such as aerobic respiration, sulfate reduction, and methanogenesis (Fig.5 from Zheng et al. 2025). - Figure6_AquaMEND_sorption: Contains on model simulation outputs for investigating the effects of salinity on dissolved organic matter (DOM) sorption and desorption processes (Fig. 6 from Zheng et al. 2025). - Figure7_AquaMEND_process_couple: Contains on model simulation outputs for exploring coupled biotic-abiotic processes and their interactions (Fig. 7 from Zheng et al. 2025). - data: Includes datasets used to develop salinity response functions and evaluate salinity buffering capacity. Datasets for MEND model calibration. - database: Contains the `.dat` file required by PHREEQC for model execution. - README.md: A Markdown plain text file describing the computational tools and directories. Files are a mixture of plain text CSV (comma-separated value) and plain text *.dat files written by the model; no special software is required to read them.

EARTH SCIENCE > AGRICULTURE > SOILS > SOIL SALINIT↗
DOE OSTI2020

The LLNL Program in Relativistic Heavy-Ion Physics: FY20 Annual Laboratory Continuation Progress Report

The LLNL Heavy-Ion Group has research interests in the features and phenomena of nuclear matter at extreme temperatures and densities. It pursues these interests through participation in two experimental collaborations (ATLAS and sPHENIX) and one joint theory/experiment topical collaboration (JETSCAPE). The group is funded through a combination of LDRD, DOE-SC NP and an award from US ATLAS Software and Computing Operations, which is ultimately funded through HEP. The group's activities in FY20 were oriented around beginning a new LDRD project and fi lling two open postdoc positions while contributing to the ATLAS jet and UPC programs as well as participating in sPHENIX. Both postdoc positions were lled, effectively doubling the side of the LLNL Heavy-Ion Group, by Qipeng Hu (starting 6/20) and Dhanush Hangal (starting 8/20).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

PM2.5 Active Aerosol Collection Field Campaign Report

The long-range transport of aerosols can affect local air quality as well as contribute elements and constituents to mountain watersheds that have potentially positive (e.g., nitrate) and negative (e.g., heavy metals) effects to the local ecosystem. Isotopic analysis of aerosols can be a powerful tool for deconvolving the relative contributions of far-distant and local sources to the composition of collected aerosols. Our field campaign involved the week-long collection of PM2.5 (i.e., particulate matter with an aerodynamic diameter of about 2.5 microns) aerosols on filters, which were returned to the laboratories at Lawrence Berkeley National Laboratory (LBNL) for analysis. The sampling sites were located at the Gothic, Colorado Surface Atmosphere Integrated Field Laboratory (SAIL) Atmospheric Radiation Measurement (ARM) and the Mt. Crested Butte, Colorado SAIL ARM sites. The original intention was to measure the lead (Pb) and strontium (Sr) isotopic compositions of the collected aerosols at high precision to provide constraints on source portioning and attribution, as well as analyze the chemical compositions and nitrogen and carbon isotopic compositions. However, severe blank issues arose that prevented the planned isotopic analyses of Sr, Pb, C, and N and severely affected the analyses of the bulk chemical compositions of the collected aerosols, resulting in the failure of the study. The issue is described in Section 2.0.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Strongly Coupled Plasmon and Phonon Polaritons as Seen by Photon and Electron Probes

The ability to control and modify infrared excitations in condensed matter is of both fundamental and applied interest. Here we explore a system supporting low-energy excitations, in particular, mid-infrared localized plasmon modes and phonon polaritons that are tuned to be strongly coupled. We study the coupled modes by using far-field infrared spectroscopy, state-of-the-art monochromated electron energy-loss spectroscopy, numerical simulations, and analytical modeling. Here we demonstrate that the electron probe facilitates a precise characterization of polaritons constituting the coupled system, and enables an active control over the coupling and the resulting sample response both in frequency and space. Although far-field optical spectra can be substantially different from near-field electron energy-loss spectra, we show that a direct comparison is possible via postprocessing and right positioning of the electron beam. The resulting spectra allow us to evaluate the key parameters of the coupled system, such as the coupling strength, which we demonstrate to be probe independent. Our work establishes a rigorous description of the spectral features observed in light- and localized electron-based spectroscopies, which can be extended to the analysis of analogous optical systems with applications in heat management and electromagnetic field concentration or nanofocusing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

A -type antiferromagnetic order in the Zintl-phase insulator EuZn 2 P 2

Zintl phases, containing strongly covalently bonded frameworks with separate ionically bonded ions, have emerged as a critical materials family in which to couple magnetism and strong spin-orbit coupling to drive diverse topological phases of matter. Here we report the single-crystal synthesis, magnetic, thermodynamic, transport, and theoretical properties of the Zintl compound EuZn 2 P 2 that crystallizes in the anti-La 2 O 3 (CaAl 2 Si 2 ) P-3m1 structure, containing triangular layers of Eu 2+ ions. In-plane resistivity measurements reveal insulating behavior with an estimated activation energy of E g = 0.11eV. Specific heat and magnetization measurements indicate antiferromagnetic ordering at T N = 23K. Curie-Weiss analysis of in-plane and out of plane magnetic susceptibility from T = 150 to 300 K yields p eff = 8.61 for μ 0 H⊥c and p eff = 7.74 for μ 0 H//c, close to the expected values for the 4f 7 J = S = 7/2 Eu 2+ ion and indicative of weak anisotropy. Below T N , a significant anisotropy of χ ⊥ /χ // ≈ 2.3 develops, consistent with A-type magnetic order as observed in isostructural analogs and as predicted by the density functional theory calculations reported herein. The positive Weiss temperatures of θ W =19.2K for μ 0 H⊥c and θ W =41.9K for μ 0 H//c show a similar anisotropy and suggest competing ferromagnetic and antiferromagnetic interactions. Comparing Eu magnetic ordering temperatures across trigonal EuM 2 X 2 (M= divalent metal, X= pnictide) shows that EuZn 2 P 2 exhibits the highest ordering temperature, with variations in T N correlating with changes in expected dipolar interaction strengths within and between layers and independent of the magnitude of electrical conductivity. These results provide experimental validation of the crystochemical intuition that the cation Eu 2+ layers and the anionic (M 2 X 2 ) 2– framework can be treated as electronically distinct subunits, enabling further predictive materials design.

36 MATERIALS SCIENCE↗