Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AERODYNAMICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Aerodynamic comparisons of STS-1 Space Shuttle entry vehicle

A conventional flight-test program, which slowly and cautiously approaches more severe flight conditions, was not possible with the Orbiter. On the first flight, the Orbiter entered the atmosphere at Mach 28 and decelerated through the Mach range. (The subsonic portion of flight was also flown by another orbiter vehicle during the Approach and Landing Test Program.) Certification for the first flight was achieved by an extensive wind-tunnel test and analysis program and by restricting the flight maneuvers severely. The initial flights of the orbiter were heavily instrumented for the purpose of obtaining accurate aerodynamic data. Even without maneuvers to excite the system, the first flight provided comparisons between flight and wind-tunnel-derived predicted data in the areas of aerodynamic performance, longitudinal trim, and reaction-control jet interaction. The aerodynamic performance comparisons are presented.

Young, J. C.↗

Aerodynamic interactions between a 1/6 scale helicopter rotor and a body of revolution

A wind-tunnel investigation was conducted in which independent, steady state aerodynamic forces and moments were measured on a 2.24-m-diam, two bladed helicopter rotor and a body of revolution. The objective was to determine the interaction of the body on the rotor performance and the effect of the rotor on the body aerodynamics for variations in velocity, thrust, tip-path-plane angle of attack, body angle of attack, rotor/body position, and body nose geometry. Results show that a body of revolution near the rotor can produce significant favorable or unfavorable effects on rotor performance, depending on the operating condition. Body longitudinal aerodynamic characteristics are significantly modified by the presence of an operating rotor and hub.

Betzina, M. D.↗

Concept definition and aerodynamic technology studies for single-engine V/STOL fighter/attack aircraft

The results obtained in the early stages of a research program to develop aerodynamic technology for single-engine V/STOL fighter/attack aircraft projected for the post-1990 period are summarized. This program includes industry studies jointly sponsored by NASA and the Navy. Four contractors have identified promising concepts featuring a variety of approaches for providing propulsive lift. Vertical takeoff gross weights range from about 10,000 to 13,600 kg (22,000 to 30,000 lb). The aircraft have supersonic capability, are highly maneuverable, and have significant short takeoff overload capability. The contractors have estimated the aerodynamics and identified aerodynamic uncertainties associated with their concepts. Wind-tunnel research programs will be formulated to investigate these uncertainties. A description of the concepts is emphasized.

Nelms, W. P.↗

An overview of NASA's role in maneuvering missile aerodynamic technology

This paper presents an overview of the role NASA has had and continues to pursue in providing missile aerodynamic technology. In the past, NASA has provided considerable support to the missile industry and the military. The support has generally taken the form of theoretical aerodynamic analyses, experimental studies to provide solutions for specific problems, and the documentation of existing foreign missile systems and domestic missiles. In 1975, NASA shifted its missile-related efforts in aerodynamics from this largely service role to one of conducting more basic research. The areas of research include: innovative methods for roll control of cruciform missiles, airbreathing missiles with maneuver requirements, and an advanced generation of monoplanar missiles for efficient supersonic carriage and delivery.

Sawyer, W. C.↗

Aerodynamic damping measurements in a transonic compressor

A method has been developed and demonstrated for the direct measurement of aerodynamic damping in a transonic compressor. The method is based on the inverse solution of the structural dynamic equations of motion of the blade-disk system. The equations are solved inversely to determine the forces acting on the system. If the structural dynamic equations are transformed to multiblade or modal coordinates, the damping can be measured for blade-disk modes, and related to a reduced frequency and interblade phase angle. This method of damping determination was demonstrated using a specially instrumented version of the MIT Transonic Compressor run in the MIT Blowdown Compressor Test Facility. No regions of aeroelastic instability were found. In runs at the operating point, the rotor was aerodynamically excited by a controlled two-per-revolution fixed up-stream disturbance. The disturbance was sharply terminated midway through the test. Analysis of the data in terms of multiblade modes led to a direct measurement of aerodynamic damping for three interblade phase angles.

Crawley, E. F.↗

Aerodynamic interactions between a 1/6-scale helicopter rotor and a body of revolution

A wind-tunnel investigation was conducted in which independent, steady-state aerodynamic forces and moments were measured on a 2.24-m-diam, two-bladed helicopter rotor and a body of revolution. The objective was to determine the interaction of the body on the rotor performance and the effect of the rotor on the body aerodynamics for variations in velocity, thrust, tip-path-plane angle of attack, rotor/body position, and body nose geometry. Results show that a body of revolution near the rotor can produce significant favorable or unfavorable effects on rotor performance, depending on the operating condition. Body longitudinal aerodynamic characteristics are significantly modified by the presence of an operating rotor and hub.

Betzina, M. D.↗

Fluid Dynamics Panel Symposium on Aerodynamics of Power Plant Installation

Powerplant installations involve complex flows, strongly influenced by viscous effects and often with important aerodynamic interactions between the airframe and propulsion system. The introduction of vehicle propulsion concepts, and points of emphasis in aircraft and missile design requirements, provide an expanding range of aerodynamic problems which cal for both experimental and theoretical study. Aerodynamic problems in powerplant installation are surveyed and work which has improved basic understanding or has enhanced prediction and design methods in this field is reviewed. Powerplant installation effects for both combat and transport aircraft are emphasized.

Henderson, W. P.↗

An analysis of aerodynamic requirements for coordinated bank-to-turn autopilots

Two planar missile airframes were compared having the potential for improved bank-to-turn control but having different aerodynamic properties. The comparison was made with advanced level autopilots using both linear and nonlinear 3-D aerodynamic models to obtain realistic missile body angular rates and control surface incidence. Cortical cross-coupling effects are identified and desirable aerodynamics are recommended for improved coordinated (BTT) (CBTT) performance. In addition, recommendations are made for autopilot control law analyses and design techniques for improving CBTT performance.

Arrow, A.↗

Free Wake Techniques for Rotor Aerodynamic Analysis. Volume 1: Summary of Results and Background Theory

Results obtained during the development of a consistent aerodynamic theory for rotors in hovering flight are discussed. Methods of aerodynamic analysis were developed which are adequate for general design purposes until such time as more elaborate solutions become available, in particular solutions which include real fluids effects. Several problems were encountered in the course of this development, and many remain to be solved, however it is felt that a better understanding of the aerodynamic phenomena involved was obtained. Remaining uncertainties are discussed.

Miller, R. H.↗

Effects of wing and tail location on the aerodynamic characteristics of an airplane for Mach numbers from 0.25 to 4.63

Experimental investigations have been conducted to determine the effect of wing vertical position and horizontal-tail vertical and axial position on the static aerodynamic characteristics of a wing-body horizontal-tail configuration. The configurations investigated included the wing in a high, mid, or low position on the body with the horizontal tail in each of these vertical positions as well as in three axial positions. The closest position of the horizontal tail to the wing essentially provided on all-wing configuration. In addition, tests were made for the three wing positions with the horizontal tail removed. The tests were made in three different wind tunnels to provide data for a Mach number range from 0.25 to 4.63. The purpose of the investigation was to illustrate the strong effects of interference flow fields as a function of geometry and flight regime. An analysis of the results indicate some arrangements that might lead to aerodynamic problems and others in which the interference flow fields might be favorably exploited. The results suggest that a coplanar concept with a translating horizontal tail could potentially minimize the aerodynamic changes with Mach number and provide more optimum performance over the Mach number range.

Spearman, M. L.↗

A common geometric data-base approach for computer-aided manufacturing of wind-tunnel models and theoretical aerodynamic analysis

A more automated process to produce wind tunnel models using existing facilities is discussed. A process was sought to more rapidly determine the aerodynamic characteristics of advanced aircraft configurations. Such aerodynamic characteristics are determined from theoretical analyses and wind tunnel tests of the configurations. Computers are used to perform the theoretical analyses, and a computer aided manufacturing system is used to fabricate the wind tunnel models. In the past a separate set of input data describing the aircraft geometry had to be generated for each process. This process establishes a common data base by enabling the computer aided manufacturing system to use, via a software interface, the geometric input data generated for the theoretical analysis. Thus, only one set of geometric data needs to be generated. Tests reveal that the process can reduce by several weeks the time needed to produce a wind tunnel model component. In addition, this process increases the similarity of the wind tunnel model to the mathematical model used by the theoretical aerodynamic analysis programs. Specifically, the wind tunnel model can be machined to within 0.008 in. of the original mathematical model. However, the software interface is highly complex and cumbersome to operate, making it unsuitable for routine use. The procurement of an independent computer aided design/computer aided manufacturing system with the capability to support both the theoretical analysis and the manufacturing tasks was recommended.

See, M. J.↗

Aircraft aerodynamic prediction method for V/STOL transition including flow separation

A numerical procedure was developed for the aerodynamic force and moment analysis of V/STOL aircraft operating in the transition regime between hover and conventional forward flight. The trajectories, cross sectional area variations, and mass entrainment rates of the jets are calculated by the Adler-Baron Jet-in-Crossflow Program. The inviscid effects of the interaction between the jets and airframe on the aerodynamic properties are determined by use of the MCAIR 3-D Subsonic properties are determined by use of the MCAIR 3-D Subsonic Potential Flow Program, a surface panel method. In addition, the MCAIR 3-D Geometry influence Coefficient Program is used to calculate a matrix of partial derivatives that represent the rate of change of the inviscid aerodynamic properties with respect to arbitrary changes in the effective wing shape.

Gilmer, B. R.↗

Aerodynamic evaluation of circulation control propellers

The aerodynamic compatibility of fixed-pitch circulation-control (CC) propellers with the performance characteristics and requirements of a 1600 kg (3600 lb) single-engine variable-pitch propeller general aviation airplane was evaluated. The initial results with elliptical-shaped CC airfoils indicated that the feasibility of application to fixed-pitch propellers was doubtful for the class of airplane investigated (cruise speed of about 300 km/hr) and improbable for higher-speed airplanes. Supplemental data for a cambered circulation-control supercritical airfoil, which became available after completion of the initial evaluation, were subsequently analyzed and are included in the Addendum to this report. With the much superior aerodynamic characteristics of the CC-supercritical airfoil, elimination of variable pitch appears aerodynamically feasible for low-speed airplanes through the use of a moderate amount of upper-surface blowing near the trailing edge during cruise. Overall feasibility depends upon results of structural and systems-type analyses.

Braslow, A. L.↗

Nonlinear aerodynamic modeling of flap oscillations in transonic flow - A numerical validation

The regime of validity of a nonlinear aerodynamic force and moment formulation, based on concepts from nonlinear functional analysis and applicable to a transonic airfoil with a deflecting flap, is investigated. A time-dependent finite difference technique is used to evaluate the aerodynamic data of the formulation in terms of specified, characteristic motions. Flap-motion histories are generated from the flap inertial equations of motion, with aerodynamic reactions specified by the moment formulation. The motion histories depicting the cases of decaying and growing flap oscillations are compared with histories generated through simultaneous, coupled solution of the fluid-dynamic equations and flap inertial equations of motion. The range of applicability of the formulation is discussed.

Chyu, W. J.↗

Estimation of parameters involved in high angle-of-attack aerodynamic theory using spin flight test data

The difficulty in applying parameter estimation techniques to spinning airplanes is due in part to the unwieldy number of possible combinations of terms in the equations of motion, when the model structure is unknown. The combination of high angle of attack and high rotation rate results in aerodynamic functions which are quite complex. For wing dominated configurations it is advantageous to use aerodynamic theory to generate the model structure. In this way, the number of unknown parameters is reduced and the model accuracy may be increased. Under conditions for which the theory is inadequate, however, model accuracy may be reduced. Strip theory, for example, is incapable of predicting autorotative rolling moments indicated by wind tunnel tests at angles of attack exceeding 40 degrees. An improved aerodynamic theory would be necessary to successfully apply the technique advanced for such regions.

Taylor, L. W., Jr.↗

Aerodynamic Design of Road Vehicles

Guidebook discusses design of road vehicles to reduce aerodynamic drag. Book presents strategy for integrating aerodynamic design into vehicle design. Book written for readers lacking experience in aerodynamics.

Kurtz, D. W.↗