Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

The variation in activity of recombination centers in silicon p-n structures under the conditions of acoustic loading

Using the method of differential coefficients of current-voltage characteristics, deep levels in the Cz-Si p-n structures are studied under the ultrasonic loading conditions (longitudinal waves of a frequency of 4-26 MHz and intensity as high as 0.6 W/cm{sup 2}). The levels with thermal activation energy of 0.44, 0.40, 0.37, 0.48, and 0.46 eV are revealed. It is assumed that these levels are associated with the E center, bistable B{sub S}O{sub 2i} complex, and interstitial atoms captured by dislocation loops, respectively. It is established that ultrasound induces an increase in the contribution to the recombination processes of shallower levels and a decrease in activation energy of defects. The possibility of acoustoinduced reversible reconstruction of the configuration of the B{sub S}O{sub 2i} complex is analyzed.

36 MATERIALS SCIENCE↗

Simulations of the Biodegradation of Citrate Based Polymers for Artificial Scaffolds Using Accelerated Reactive Molecular Dynamics

Here, we explore the reactivity and mechanical properties of poly(1,6-hexanediol-co-Citric acid) via ReaxFF molecular dynamics simulations. We implement an accelerated scheme within the ReaxFF framework to study the hydrolysis reaction of the polymer which is provided with sufficient amount of energy known as the restrain energy after a suitable pre-transition state configuration is obtained to overcome the activation energy barrier and the desired product is obtained. The validity of the ReaxFF force field is established by comparing the ReaxFF energy barriers of ester and ether hydrolysis with benchmark DFT values in literature. We perform chemical and mechanical degradation of polymer chain bundles at 300 K. We find that ester hydrolyzes faster than ether due to lower activation energy barrier of the reaction. The selectivity of the bond-boost scheme has been demonstrated by lowering the boost parameters of the accelerated simulation which almost stops the ether hydrolysis. Mechanical degradation of pre-hydrolyzed and intermittent hydrolyzed polymer bundles is performed along the longitudinal direction at two different strain rates. We find that the tensile modulus of the polymers are increases with increase in strain rates which shows that polymers show a strain dependent behavior. The tensile modulus of the Polyester-ether is higher than Polyester yet reaches yield-stress faster than Polyester. This makes Polyester more ductile than Polyester-ether.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of Gd{sup 3+} and Nd{sup 3+} co-doped ceria by using citric acid-nitrate combustion method

A series of Ce{sub 0.8}Gd{sub 0.2-x}Nd{sub x}O{sub 2-{delta}} (x = 0-0.20) compositions have been synthesized by citric acid-nitrate combustion method. XRD measurements indicate that all the obtained materials crystallized in cubic fluorite-type structure. Lattice parameters were calculated by Rietveld method and the parameter a values in Ce{sub 0.8}Gd{sub 0.2-x}Nd{sub x}O{sub 2-{delta}} system obey Vegard's law, a (A) = 5.4224 + 0.1208x. The obtained powders have good sinterability and the relative density could reach above 95% after being sintered at 1400 {sup o}C. Impedance spectroscopy measurements indicated that the conductivity of Ce{sub 0.8}Gd{sub 0.2-x}Nd{sub x}O{sub 2-{delta}} first increased and then decreased with Nd dopant content x. The maximum conductivity, {sigma}{sub 700{sup o}C} = 6.26 x 10{sup -2} S/cm, was found in Ce{sub 0.8}Gd{sub 0.12}Nd{sub 0.08}O{sub 1.9} when sintered at 1300 {sup o}C. The corresponding activation energies of conduction had a minimum value E{sub a} = 0.676 eV. The results tested experimentally the validity of the effective atomic number concept of recent density functional theory, which had suggested that co-dopant with effective atomic number between 61 (Pm) and 62 (Sm) was the ideal dopant exhibiting high ionic conductivity and low activation energy.

36 MATERIALS SCIENCE↗

Structural and electrical properties of TiO{sub 2}/ZnO core–shell nanoparticles synthesized by hydrothermal method

TiO{sub 2}/ZnO core–shell nanoparticles were successfully synthesized by hydrothermal method in two stages: first stage is the hydrothermal synthesis of ZnO nanoparticles and second stage the obtained ZnO nanoparticles are encapsulated in TiO{sub 2}. The obtained ZnO, TiO{sub 2} and TiO{sub 2}/ZnO core–shell nanoparticles were investigated by means of X-ray diffraction, transmission electron microscopy, Brunauer, Emmett, Teller and resistance measurements. X-ray diffraction analysis revealed the presence of both, TiO{sub 2} and ZnO phases in TiO{sub 2}/ZnO core–shell nanoparticles. According to transmission electron microscopy images, ZnO nanoparticles have hexagonal shapes, TiO{sub 2} nanoparticles have a spherical shape, and TiO{sub 2}/ZnO core–shell nanoparticles present agglomerates and the shape of particles is not well defined. The activation energy of TiO{sub 2}/ZnO core–shell nanoparticles was about 101 meV. - Graphical abstract: Display Omitted - Highlights: • TiO{sub 2}/ZnO core–shell nanoparticles were synthesized by hydrothermal method. • TiO{sub 2}/ZnO core–shell nanoparticles were investigated by means of XRD, TEM and BET. • Electrical properties of TiO{sub 2}/ZnO core–shell nanoparticles were investigated. • The activation energy of TiO{sub 2}/ZnO core–shell nanoparticles was about E{sub a} = 101 meV.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Validation of the Cossee–Arlman mechanism for propylene oligomerization on Ni/UiO-66

Steady state rate expressions can be derived to distinguish the Cossee–Arlman and metallacycle mechanisms postulated for propylene oligomerization on nickel-based catalysts based on product selectivities, where product selectivities for the former are a function of olefin pressure because sequential coordination and insertion steps lead to independent mechanistic pathways for different hexene isomers. In contrast, the metallacycle mechanism presents pressure-independent product selectivities due to successive coordination prior to the kinetically relevant steps in each mechanism. In this work, steady state propylene oligomerization rates and selectivities were measured in the absence of an activator on nickel functionalized UiO-66 metal organic framework (MOF), Ni/UiO-66, to validate the Cossee–Arlman mechanism for light olefin oligomerization. In situ NO titrations reveal that ~5% of nickel sites were active during the reaction, and thus, not all nickel sites are relevant for catalysis. Propylene dimerization was first order in propylene pressure from 5 to 500 kPa with an apparent activation energy of ~20 kJ mol -1 from 453 to 493 K. Calculated apparent activation energies with density functional theory (DFT) calculations on cluster models of Ni/UiO-66 are in agreement with experiment to corroborate the Cossee–Arlman mechanism. Selectivities of hexene products and the ratio of hexene product selectivities on Ni/UiO-66 are in accordance with selectivity expressions derived from the Cossee–Arlman mechanism. In conclusion, analysis of product selectivities can be used more extensively to demarcate the Cossee–Arlman and metallacycle mechanisms for olefin oligomerization on metal-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Peculiarities of CsPbBr3 perovskites melting in quasi-equilibrium conditions

The melting behavior of CsPbBr3 perovskite was studied by differential thermal analysis (DTA). It was found that melting of CsPbBr3 occurs non-isothermally in the temperature range of 561-570 °C. From the temperature dependence of the solid-phase melting rate, it was established that at 567±1 °C the change in the mechanism of the solid-phase melting goes from fragmentation to dissolution at the surface. The obtained values of the activation energy of the melting of the solid phase in CsPbBr3 show that the activation energy of the dissolution of the solid-phase fragments is 4 times greater than the energy of the fragmentation of the solid phase.

Kopach, O.↗

Chemistry in interstellar space

The particular characteristics of chemistry in interstellar space are determined by the unique environmental conditions involved. Interstellar matter is present at extremely low densities. Large deviations from thermodynamic equilibrium are, therefore, to be expected. A relatively intense ultraviolet radiation is present in many regions. The temperatures are in the range from 5 to 200 K. Data concerning the inhibiting effect of small activation energies in interstellar clouds are presented in a table. A summary of measured activation energies or barrier heights for exothermic exchange reactions is also provided. Problems of molecule formation are discussed, taking into account gas phase reactions and surface catalyzed processes.

Donn, B.↗

Elevated temperature creep-rupture behavior of the single crystal nickel-base superalloy NASAIR 100

The creep and rupture behavior of 001-line-oriented single crystals of the nickel-base superalloy NASAIR 100 was investigated at temperatures of 925 and 1000 C. In the stress and temperature ranges studied, the steady state creep rate, time to failure, time to the onset of secondary creep, and the time to the onset of tertiary creep all exhibited power law dependencies on the applied stress. The creep rate exponents for this alloy were between seven and eight, and the modulus-corrected activation energy for creep was approximately 350 kjoule/mole, which was comparable to the measured activation energy for Ostwald ripening of the gamma-prime precipitates. Oriented gamma-prime coarsening to form lamellae perpendicular to the applied stress was very prominent during creep. At 1000 C, the formation of a continuous gamma-gamma-prime lamellar structure was completed during the primary creep stage. Shear through the gamma-gamma-prime interface is considerd to be the rate limiting step in the deformation process. Gradual thickening of the lamellae appeared to be the cause of the onset of tertiary creep. At 925 C, the fully developed lamellar structure was not achieved until the secondary or tertiary creep stages. At this temperature, the gamma-gamma-prime lamellar structure did not appear to be as beneficial for creep resistance as at the higher temperature.

Nathal, M. V.↗

Two-dimensional stability of laminar flames

The stability of laminar flames was studied numerically and the dependence of stability on finite rate chemistry with low activation energy and variable thermodynamic and transport properties was addressed. The calculations show that activation energy and details of chemistry play a minor role in altering the linear neutral stability results from asymptotic analysis. Variable specific heat makes a marginal change to the stability; variable transport properties, on the other hand, tend to substantially enhance the stability from a critical wave number of about 0.50 to 0.20. Also, the effects of variable properties tend to nullify the effects of nonunity Lewis number. When the Lewis number of a single species is different from unity, as is true in a hydrogen-air premixed flame, the stability results remain close to that of unity Lewis number.

Mukunda, H. S.↗

Time-resolved synchrotron x-ray diffraction studies of the crystallization of amorphous Co (80-x) Fe x B₂₀

This paper addresses the time-dependent crystallization process occurring in “bulk” amorphous Co (80-x) Fe x B₂₀ (x = 20, 40) metallic ribbons by means of synchrotron x-ray diffraction (SXRD) and transmission electron microscopy. Metallic ribbons, produced via melt-spinning technique, were annealed in-situ, with SXRD patterns collected every 60 s. SXRD reveals that Co₄₀Fe₄₀B₂₀ alloys crystallize from an amorphous structure to a primary bcc α-(Co,Fe) phase, whereas Co₆₀Fe₂₀B₂₀ initially crystallizes into the same bcc α-(Co,Fe) but exhibits cooperative growth of both stable and metastable boride phases later into the hold. Johnson-Mehl-Avrami-Kolmogorov statistics was used on post annealed samples to determine the mechanisms of growth and the activation energy (E a ) of the α-(Co,Fe) phase. Results indicate that the growth mechanisms are similar for both alloy compositions for all annealing temperatures, with the Avrami exponent of n = 1.51(1) and 2.02(6) for x = 20 and 40, respectively, suggesting one-dimensional growth, with a decreasing nucleation rate. Activation energy for α-(Co,Fe) was determined to be 2.7(1) eV and 2.4(3) eV in x = 20 and 40, respectively, suggesting that those alloys with a lower Co content have a stronger resistance to crystallization. Based on these results, fabrication of CoFeB magnetic tunnel junctions via depositing amorphous layers and subsequently annealing to induce lattice matching presents itself as a viable and efficient method, for increasing the giant magnetoresistance in magnetic tunnel junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dislocation electrical conductivity of synthetic diamond films

A relationship between the electric resistance of single-crystal homoepitaxial and polycrystalline diamond films and their internal structure has been investigated. It is established that the electrical conductivity of undoped homoepitaxial and polycrystalline diamond films is directly related to the dislocation density in them. A relation linking the resistivity {rho} ({approx}10{sup 13}-10{sup 15} {omega} cm) with the dislocation density {gamma} ({approx}10{sup 14}-4 x 10{sup 16} m{sup -2}) is obtained. The character of this correlation is similar for both groups of homoepitaxial and polycrystalline diamond films. Thin ({approx}1-8 {mu}m) homoepitaxial and polycrystalline diamond films with small-angle dislocation boundaries between mosaic blocks exhibit dislocation conductivity. The activation energy of dislocation acceptor centers was calculated from the temperature dependence of the conductivity and was found to be {approx}0.3 eV. The conduction of thick diamond films (h > 10 {mu}m) with the resistivity {rho} {approx} 10{sup 8} {omega} cm is determined by the conduction of intercrystallite boundaries, which have a nondiamond hydrogenated structure. The electronic properties of the diamond films are compared with those of natural semiconductor diamonds of types IIb and Ic, in which dislocation acceptor centers have activation energies in the range 0.2-0.35 eV and are responsible for hole conduction.

36 MATERIALS SCIENCE↗

Quantitative analysis of desorption and decomposition kinetics of formic acid on Cu(111): The importance of hydrogen bonding between adsorbed species

Quantitative analysis of desorption and decomposition kinetics of formic acid (HCOOH) on Cu(111) was performed by temperature programmed desorption (TPD), X-ray photoelectron spectroscopy, and time-resolved infrared reflection absorption spectroscopy. The activation energy for desorption is estimated to be 53–75 kJ/mol by the threshold TPD method as a function of coverage. Vibrational spectra of the first layer HCOOH at 155.3 K show that adsorbed molecules form a polymeric structure via the hydrogen bonding network. Adsorbed HCOOH molecules are dissociated gradually into monodentate formate species. The activation energy for the dissociation into monodentate formate species is estimated to be 65.0 kJ/mol at a submonolayer coverage (0.26 molecules/surface Cu atom). The hydrogen bonding between adsorbed HCOOH species plays an important role in the stabilization of HCOOH on Cu(111). The monodentate formate species are stabilized at higher coverages, because of the lack of vacant sites for the bidentate formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of the order parameter and the potential of the hydrogen bond in a ferroelectric DKDP crystal

Within a pseudospin model of a KD{sub 2}PO{sub 4} crystal, the relaxation time of the average pseudospin (the order parameter) in the mean-field approximation depends on the activation energy of the jump of a deuteron between the minima of the hydrogen bond potential, the average equilibrium value of the pseudospin, and the dielectric susceptibility. Calculating the average equilibrium spin and the susceptibility within the four-particle cluster approximation and fitting the data for the width of the central peak from a Raman scattering experiment, we numerically estimate the activation energy. For the same values of the parameters of the cluster method, the calculated inverse relaxation time is in good agreement with the data of ultrasonic measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural characterization of weld joints of 9Cr reduced activation ferritic martensitic steel fabricated by different joining methods

This paper presents a detailed electron microscopy study on the microstructure of various regions of weldment fabricated by three welding methods namely tungsten inert gas welding, electron beam welding and laser beam welding in an indigenously developed 9Cr reduced activation ferritic/martensitic steel. Electron back scatter diffraction studies showed a random micro-texture in all the three welds. Microstructural changes during thermal exposures were studied and corroborated with hardness and optimized conditions for the post weld heat treatment have been identified for this steel. Hollomon–Jaffe parameter has been used to estimate the extent of tempering. The activation energy for the tempering process has been evaluated and found to be corresponding to interstitial diffusion of carbon in ferrite matrix. The type and microchemistry of secondary phases in different regions of the weldment have been identified by analytical transmission electron microscopy. - Highlights: • Comparison of microstructural parameters in TIG, electron beam and laser welds of RAFM steel • EBSD studies to illustrate the absence of preferred orientation and identification of prior austenite grain size using phase identification map • Optimization of PWHT conditions for indigenous RAFM steel • Study of kinetics of tempering and estimation of apparent activation energy of the process.

36 MATERIALS SCIENCE↗

Revisited reaction-diffusion model of thermal desorption spectroscopy experiments on hydrogen retention in material

Desorption phase of thermal desorption spectroscopy (TDS) experiments performed on tungsten samples exposed to flux of hydrogen isotopes in fusion relevant conditions is analyzed using a reaction-diffusion model describing hydrogen retention in material bulk. Two regimes of hydrogen desorption are identified depending on whether hydrogen trapping rate is faster than hydrogen diffusion rate in material during TDS experiments. In both regimes, a majority of hydrogen released from material defects is immediately outgassed instead of diffusing deeply in material bulk when the evolution of hydrogen concentration in material is quasi-static, which is the case during TDS experiments performed with tungsten samples exposed to flux of hydrogen isotopes in fusion related conditions. In this context, analytical expressions of the hydrogen outgassing flux as a function of the material temperature are obtained with sufficient accuracy to describe main features of thermal desorption spectra (TDSP). These expressions are then used to highlight how characteristic temperatures of TDSP depend on hydrogen retention parameters, such as trap concentration or activation energy of detrapping processes. The use of Arrhenius plots to characterize retention processes is then revisited when hydrogen trapping takes place during TDS experiments. Retention processes are also characterized using the shape of desorption peaks in TDSP, and it is shown that diffusion of hydrogen in material during TDS experiment can induce long desorption tails visible aside desorption peaks at high temperature in TDSP. These desorption tails can be used to estimate activation energy of diffusion of hydrogen in material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of magnetic fields on spin glass dynamics

The effects of a magnetic field on spin glass dynamics are explored for a Cu 0.887 Mn 0.113 thin film of thickness L = 20 nm in a multilayer configuration. An experimental protocol removes uncertainties associated with the time dependence of the field-cooled magnetization M FC (t,T). Activated dynamics is exhibited after the spin glass correlation length ξ(t,T) has reached L, creating a quasiequilibrium state. Here, the activation energy depends upon the strength of the magnetic field H. The magnitude of the activation energy diminishes as H 2 , the coefficient of which is proportional to the number of correlated spins. A quantitative fit requires a “pancakelike” correlated region, associated with the T = 0 phase transition for a spin glass in D = 2 dimensions.

36 MATERIALS SCIENCE↗

Iron Ore Reduction by Hydrogen Using a Laboratory Scale Fluidized Bed Reactor: Kinetic Investigation—Experimental Setup and Method for Determination

The reduction kinetics of hematite iron ore fines to metallic iron by hydrogen using a laboratory fluidized bed reactor were investigated in a temperature range between 873 K and 1073 K, by measuring the weight change of the sample portion during reduction. The fluidization conditions were checked regarding plausibility within the Grace diagram and the measured pressure drop across the material during experiments. The apparent activation energy of the reduction was determined against the degree of reduction and varied along an estimated two-peak curve between 11 and 55 kJ mol{sup −1}. Conventional kinetic analysis for the reduction of FeO to metallic iron, using typical models to describe gas–solid reactions, does not show results with high accuracy. Multistep kinetic analysis, using the Johnson–Mehl–Avrami model, shows that the initial stage of reduction from Fe{sub 2}O{sub 3} to Fe{sub 3}O{sub 4}, and partly to FeO, is controlled by diffusion and chemical reaction, depending on the temperature. Further reduction can be described by a combination of nucleation and chemical reaction, whereby the influence of nucleation increases with an increasing reduction temperature. The results of the kinetical analysis were linked to the shape of the curve from apparent activation energy against the degree of reduction.

36 MATERIALS SCIENCE↗

Identifying the Unique Properties of α-Bi 2 Mo 3 O 12 for the Activation of Propene

In order to understand the remarkable activity of α-Bi 2 Mo 3 O 12 for selective oxidation and ammoxidation of propene, the propene activation ability of four molybdenum-based mixed metal oxides - Bi 2 Mo 3 O 12 , PbMoO 4 , Bi 2 Pb 5 Mo 8 O 32 , and MoO 3 - was investigated using density functional theory. Propene activation is considered to occur via abstraction of a hydrogen atom from the methyl group of physisorbed propene by lattice oxygen. For each material, the apparent activation energy was estimated by summing the heat of adsorption of propene, the C-H bond dissociation energy, and the hydrogen attachment energy (HAE) for hydrogen addition to lattice oxygen; this sum provides a lower bound for the apparent activation energy. It was found that two structural features of oxide surfaces are essential to achieve low activation barriers: under-coordinated surface cation sites enable strong propene adsorption, and suitable 5- or 6-coordinate geometries at molybdenum result in favorable HAEs. The impact of molybdenum coordination on HAE was elucidated by carrying out a molecular orbital analysis using a cluster model of the molybdate unit. This effort revealed that, in 5- and 6-coordinate molybdates, oxygen donor atoms trans to molybdenyl oxo atoms destabilize the molybdate prior to H addition but stabilize the molybdate after H addition, thereby providing an HAE ~15 kcal/mol more favorable than that on 4-coordinate molybdate oxo atoms. Bi 3+ cations in Bi 2 Mo 3 O 12 thus promote catalytic activity by providing both strong adsorption sites for propene and forcing molybdate into 5-coordinate geometries that lead to particularly favorable values of the HAE. (Graph Presented).

36 MATERIALS SCIENCE↗