Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACETATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Effects of Polymer Morphology on Solvent and Catalyst Accessibility during Polyethylene and Polystyrene Autoxidation

Efficient catalytic deconstruction of plastics requires facile solvent and catalyst access to polymer substrates to minimize mass transfer effects. Autoxidation using Co(II) acetate, Mn(II) acetate, and a radical carrier in acetic acid is a promising strategy to deconstruct mixed plastic waste, yet the role of polymer morphology in governing solvent and catalyst accessibility remains poorly understood. Here, in situ simultaneous small- and wide-angle X-ray scattering (SAXS/WAXS), complemented by X-ray fluorescence (XRF) imaging and high-pressure differential scanning calorimetry (DSC), were used to elucidate interactions between acetic acid, a Co/Mn catalyst solution, and semicrystalline polyethylene (PE) and amorphous polystyrene (PS) from room temperature to 160 °C. In PE, acetic acid and catalyst access were confined to amorphous regions and cryomilled particle interfaces at room temperature, while crystalline lamellae remained intact after soaking for up to 34 h. Increasing temperature enabled solvent uptake into PE, followed by solvent-assisted softening above 100 °C, and a modest melting-point depression that removed lamellar transport barriers upon melting. Conversely for PS, acetic acid penetrated the glassy polymer without inducing chain mobility until the glass transition was reached, above which the observed structural changes were consistent with enhanced segmental mobility which enabled bulk penetration. These results suggest that polymer morphology and thermally activated physical transitions arising from diffusion and polymer–solvent interactions can influence whether autoxidation of plastics is transport-limited or kinetically controlled, providing a framework for aligning reaction conditions with reaction outcomes.

09 BIOMASS FUELS↗

Improved cathode materials for microbial electrosynthesis

Microbial electrosynthesis is a promising strategy for the microbial conversion of carbon dioxide to transportation fuels and other organic commodities, but optimization of this process is required for commercialization. Cathodes which enhance electrode-microbe electron transfer might improve rates of product formation. To evaluate this possibility, biofilms of Sporomusa ovata, which are effective in acetate electrosynthesis, were grown on a range of cathode materials and acetate production was monitored over time. Modifications of carbon cloth that resulted in a positive-charge enhanced microbial electrosynthesis. Functionalization with chitosan or cyanuric chloride increased acetate production rates 6-7 fold and modification with 3-aminopropyltriethoxysilane gave rates 3-fold higher than untreated controls. A 3-fold increase in electrosynthesis over untreated carbon cloth cathodes was also achieved with polyaniline cathodes. However, not all strategies to provide positively charged surfaces were successful, as treatment of carbon cloth with melamine or ammonia gas did not stimulate acetate electrosynthesis. Treating carbon cloth with metal, in particular gold, palladium, or nickel nanoparticles, also promoted electrosynthesis, yielding electrosynthesis rates that were 6-,4.7- or 4.5-fold faster than the untreated control, respectively. Cathodes comprised of cotton or polyester fabric treated with carbon nanotubes yielded cathodes that supported acetate electrosynthesis rates that were similar to 3-fold higher than carbon cloth controls. Recovery of electrons consumed in acetate was similar to 80% for all materials. The results demonstrate that one approach to increase rates of carbon dioxide reduction in microbial electrosynthesis is to modify cathode surfaces to improve microbe-electrode interactions.

Zhang, T↗

Single cell swimming dynamics of Listeria monocytogenes using a nanoporous microfluidic platform

Listeria monocytogenes remains a significant foodborne pathogen due to its virulence and ability to become established in food processing facilities. The pathogen is characterized by its ability to grow over a wide temperature range and withstand a broad range of stresses. The following reports on the chemotaxis and motility of the L. monocytogenes when exposed to relatively small concentrations of acetic acid. Using the developed nanoporous microfluidic device to precisely modulate the cellular environment, we exposed the individual Listeria cells to acetic acid and, in real time and with high resolution, observed how the cells reacted to the change in their surroundings. Our results showed that concentrations of acetic acid below 10 mM had very little, if any, effect on the motility. However, when exposed to 100 mM acetic acid, the cells exhibited a sharp drop in velocity and displayed a more random pattern of motion. These results indicate that at appropriate concentrations, acetic acid has the ability to disable the flagellum of the cells, thus impairing their motility. This drop in motility has numerous effects on the cell; its main effects being the obstruction of the cell's ability to properly form biofilms and a reduction in the overall infectivity of the cells. Since these characteristics are especially useful in controlling the proliferation of L. monocytogenes, acetic acid shows potential for application in the food industry as an active compound in designing a food packaging environment and as an antimicrobial agent.

Wright, Evan↗

Relationship between lignocellulosic biomass dissolution and physicochemical properties of ionic liquids composed of 3-methylimidazolium cations and carboxylate anions

The ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate ([EMIM]Acetate) has been widely used for biomass processing, i.e., to pretreat, activate, or fractionate lignocellulosic biomass to produce soluble sugars and lignin. However, this IL does not achieve high biomass solubility, therefore minimizing the efficiency of biomass processing. In this paper, [EMIM]Acetate and three other ILs composed of different 3-methylimidazolium cations and carboxylate anions ([EMIM]Formate, 1-allyl-3-methylimidazolium ([AMIM]) formate, and [AMIM]Acetate) were analyzed to relate their physicochemical properties to their biomass solubility performance. While all four ILs are able to dissolve hybrid poplar under fairly mild process conditions (80 °C and 100 RPM stirring), [AMIM]Formate and [AMIM]Acetate have particularly increased biomass solubility of 40 and 32%, respectively, relative to [EMIM]Acetate. Molecular dynamics simulations suggest that strong interactions between IL and specific plant biopolymers may contribute to this enhanced solubilization, as the calculated second virial coefficients between ILs and hemicellullose are most favorable for [AMIM]Formate, matching the trend of the experimental solubility measurements. The simulations also reveal that the interactions between the ILs and hemicellulose are an important factor in determining the overall biomass solubility, whereas lignin–IL interactions were not found to vary significantly, consistent with literature. Finally, the combined experimental and simulation studies identify [AMIM]Formate as an efficient biomass solvent and explain its efficacy, suggesting a new approach to rationally select ionic liquid solvents for lignocellulosic deconstruction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metabolic rewiring and biomass redistribution enable optimized mixotrophic growth in Chlamydomonas

Aquatic photosynthetic systems account for approximately one-half of all global carbon assimilation and could be a significant source of renewable fuels and feedstocks. However, rapid growth and biomass production in algae have not always translated into high product yields, partly because central metabolism is context specific, with metabolic fluxes being influenced by nutrient conditions and other environmental factors. In the green microalga Chlamydomonas reinhardtii (Chlamydomonas), mixotrophic cultures (acetate + light) grow far faster than phototrophic (light only) or heterotrophic (acetate + dark) cultures, even though acetate partially suppresses photosynthesis. Here, an isotopic dilution strategy with unlabeled acetate was combined with 13 CO 2 transient labeling to perform isotopically nonstationary metabolic flux analysis (INST-MFA) and to directly compare autotrophic and mixotrophic metabolism in Chlamydomonas supported by data from transcriptomics, proteomics, and metabolomics. INST-MFA indicated that acetate induces a synergistic rewiring of metabolism, conserving carbon by using the glyoxylate cycle and suppressing gluconeogenesis, the latter of which was discordant with omics results and prior models. Additionally, our data provide a plausible rationale for the well-known suppression of photosynthesis by acetate. We propose that reduced total protein content in mixotrophic versus phototrophic cells, much of which is attributed to reduced levels of photosynthetic proteins, decreases the costly metabolic burden of protein synthesis and represents a growth rate optimization strategy.

59 BASIC BIOLOGICAL SCIENCES↗

Performance and community structure dynamics of microbial electrolysis cells operated on multiple complex feedstocks

Microbial electrolysis is a promising technology for converting aqueous wastes into hydrogen. However, substrate adaptability is an important feature, seldom documented in microbial electrolysis cells (MECs). In addition, the correlation between substrate composition and community structure has not been well established. This study used an MEC capable of producing over 10 L/L-day of hydrogen from a switchgrass-derived bio-oil aqueous phase and investigated four additional substrates, tested in sequence on a mature biofilm. The additional substrates included a red oak-derived bio-oil aqueous phase, a corn stover fermentation product, a mixture of phenol and acetate, and acetate alone. The MECs fed with the corn stover fermentation product resulted in the highest performance among the complex feedstocks, producing an average current density of 7.3 ± 0.51 A/m 2 , although the acetate fed MECs outperformed complex substrates, producing 12.3 ± 0.01 A/m 2 . 16S rRNA gene sequencing showed that community structure and community diversity were not predictive of performance, and replicate community structures diverged despite identical inoculum and enrichment procedure. The trends in each replicate, however, were indicative of the influence of the substrates. Geobacter was the most dominant genus across most of the samples tested, but its abundance did not correlate strongly to current density. High-performance liquid chromatography (HPLC) showed that acetic acid accumulated during open circuit conditions when MECs were fed with complex feedstocks and was quickly degraded once closed circuit conditions were applied. The largest net acetic acid removal rate occurred when MECs were fed with red oak bio-oil aqueous phase, consuming 2.93 ± 0.00 g/L-day. Principal component analysis found that MEC performance metrics such as current density, hydrogen productivity, and chemical oxygen demand removal were closely correlated. Net acetic acid removal was also found to correlate with performance. However, no bacterial genus appeared to correlated to these performance metrics strongly, and the analysis suggested that less than 70% of the variance was accounted for by the two components. This study demonstrates the robustness of microbial communities to adapt to a range of feedstocks and conditions without relying on specific species, delivering high hydrogen productivities despite differences in community structure. The results indicate that functional adaptation may play a larger role in performance than community composition. Further investigation of the roles each microbe plays in these communities will help MECs to become integral in the 21st-century bioeconomy to produce zero-emission fuels.

09 BIOMASS FUELS↗

Cas9 Nickase-Assisted RNA Repression Enables Stable and Efficient Manipulation of Essential Metabolic Genes in Clostridium cellulolyticum

Essential gene functions remain largely underexplored in bacteria. Clostridium cellulolyticum is a promising candidate for consolidated bioprocessing; however, its genetic manipulation to reduce the formation of less-valuable acetate is technically challenging due to the essentiality of acetate-producing genes. Here we developed a Cas9 nickase-assisted chromosome-based RNA repression to stably manipulate essential genes in C. cellulolyticum. Our plasmid-based expression of antisense RNA (asRNA) molecules targeting the phosphotransacetylase (pta) gene successfully reduced the enzymatic activity by 35% in cellobiose-grown cells, metabolically decreased the acetate titer by 15 and 52% in wildtype transformants on cellulose and xylan, respectively. To control both acetate and lactate simultaneously, we transformed the repression plasmid into lactate production-deficient mutant and found the plasmid delivery reduced acetate titer by more than 33%, concomitant with negligible lactate formation. The strains with pta gene repression generally diverted more carbon into ethanol. However, further testing on chromosomal integrants that were created by double-crossover recombination exhibited only very weak repression because DNA integration dramatically lessened gene dosage. With the design of a tandem repetitive promoter-driven asRNA module and the use of a new Cas9 nickase genome editing tool, a chromosomal integrant (LM3P) was generated in a single step and successfully enhanced RNA repression, with a 27% decrease in acetate titer on cellulose in antibioticfree medium. These results indicate the effectiveness of tandem promoter-driven RNA repression modules in promoting gene repression in chromosomal integrants. Our combinatorial method using a Cas9 nickase genome editing tool to integrate the gene repression module demonstrates easy-to-use and high-efficiency advantages, paving the way for stably manipulating genes, even essential ones, for functional characterization and microbial engineering.

59 BASIC BIOLOGICAL SCIENCES↗

Synthesis and Spectral Properties of meso-Arylbacteriochlorins, Including Insights into Essential Motifs of their Hydrodipyrrin Precursors

Synthetic bacteriochlorins—analogues of bacteriochlorophylls, Nature’s near-infrared absorbers—are attractive for diverse photochemical studies. meso-Arylbacteriochlorins have been prepared by the self-condensation of a dihydrodipyrrin–carbinol or dihydrodipyrrin–acetal following an Eastern-Western (E-W) or Northern-Southern (N-S) joining process. The bacteriochlorins bear a gem-dimethyl group in each pyrroline ring to ensure stability toward oxidation. The two routes differ in the location of the gem-dimethyl group at the respective 3- or 2-position in the dihydrodipyrrin, and the method of synthesis of the dihydrodipyrrin. Treatment of a known 3,3-dimethyldihydrodipyrrin-1-carboxaldehyde with an aryl Grignard reagent afforded the dihydrodipyrrin-1-(aryl)carbinol, and upon subsequent acetylation, the corresponding dihydrodipyrrin-1-methyl acetate (dihydrodipyrrin– acetate). Self-condensation of the dihydrodipyrrin–acetate gave a meso-diarylbacteriochlorin (E-W route). A 2,2-dimethyl-5-aryldihydrodipyrrin-1-(aryl)carbinol underwent self-condensation to give a trans-A 2 B 2 -type meso-tetraarylbacteriochlorin (N-S route). In each case, the aromatization process entails a 2e - /2H + (aerobic) dehydrogenative oxidation following the dihydrodipyrrin self-condensation. Comparison of a tetrahydrodipyrrin–acetal (0%) versus a dihydrodipyrrin–acetal (41%) in bacteriochlorin formation and results with various 1-substituted dihydrodipyrrins revealed the importance of resonance stabilization of the reactive hydrodipyrrin intermediate. Altogether 10 new dihydrodipyrrins and five new bacteriochlorins have been prepared. The bacteriochlorins exhibit characteristic bacteriochlorophyll-like absorption spectra, including a Q y band in the region 726–743 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Products of the Strecker Synthesis as Indicators of Parent Body Conditions of the Murchison Meteorite

The Strecker synthesis, R2C=O + HCN + NH3 yields R2C(NH2)CN + H2O yields R2C(NH2)CO2H has been proposed as a source of amino acids in meteorites. The detection of carbonlyl compounds, the precursors of the amino acids in the Strecker synthesis, and a-hydroxy acids, important by-products of the Strecker synthesis, in the Murchison meteorite supports this conjecture. However, the following observations raise questions about the Strecker synthesis as the source of a-amino and a-hydroxy acids in Murchison: a) Imino acetic acids are also important by-products of the Strecker synthesis and have not been reported in Murchison. b) a-aminisobutyric acid (AIBA) is one of the most abundant amino acids in Murchison but the Strecker synthesis conducted at room temperature produced only small amounts of AIBA relative to other amino acids. c) If the a-amino and a-hydroxy acids observed in Murchison arose from a common precursor this ought to be reflected in their relative abundances, but the straight chain a-hydroxy acids appeared to be relatively abundant compared with the analogous a-amino acids. In order to address question a) we have examined a non-hydrolyzed aqueous extract of the Murchison meteorite. Imino di acetic acid, Imino propionic acetic acid and Imino butyric acetic acid (both isomers) have been identified in this fraction. The relative abundances of amino acids and imino acetic acids in this fraction are consistent with a Strecker synthesis at low temperature (263 K) as a origin of both the amino acids and the imino acetic acids found on Murchison. To deal with questions b) and c) we have carried out laboratory simulations of the Strecker synthesis. The starting concentrations for carbonlyl compounds used were based on estimates of what these concentrations might have been on the parent body. for the carbonyl compounds this estimate was determined by the amount of carbonyl compound found on Murchison plus the amounts of the corresponding amino acid and hydroxy acid found on Murchison and the rock to water ratio estimated by Clayton and Mayeda (1984). The cyanide concentration was that estimated by Peltzer et al. (1984). The ammonia concentration and pH were varied. We studied these mixtures at 298 K and 263 K. We found that high relative abundances of AIBA were produced at 263 K but not at 298 K. We only produced a-methyl a-amino hydroxy acids at 263 K with no initial ammonia. The abundances of a-amino acids, a-hydroxy acids and imino acids found on Murchison are consistent with a Strecker synthesis which took place at low temperature and with a low concentration of ammonia.

Lerner, Narcinda R.↗

Natural acetylation impacts carbohydrate recovery during deconstruction of Populus trichocarpa wood

Significant variation in the inherent degree of acetylation naturally exists in the xylem cell walls of Populus trichocarpa . During pretreatment, endogenous acetate hydrolyzes to acetic acid that can subsequently catalyze the breakdown of poplar wood, increasing the efficiency of biomass pretreatment. Poplar genotypes varying in cell wall composition were pretreated in 0.3% H 2 SO 4 in non-isothermal batch reactors. Acetic acid released from the wood was positively related to sugar release during pretreatment ( R ≥ 0.9), and inversely proportional to the lignin content of the poplar wood ( R = 0.6). There is significant variation in wood chemistry among P. trichocarpa genotypes. As a result, this study elucidated patterns of cell wall deconstruction and clearly links carbohydrate solubilization to acetate release. Tailoring biomass feedstocks for acetate release could enhance pretreatment efficiencies.

09 BIOMASS FUELS↗

Lipid production from non-sugar compounds in pretreated lignocellulose hydrolysates by Rhodococcus jostii RHA1

Valorization of all carbon sources from biorefinery wastes to biofuels and bioproducts is an attractive but challenging strategy to improve the carbon efficiency of the entire biorefinery process for economic competitiveness. Rhodococcus jostii RHA1 is considered as a promising candidate for conversion of non-sugar compounds in pretreated lignocellulose hydrolysate, which contain aromatic monomers, furans and acids derived from biomass. However, the insufficient understanding of the strain’s complex metabolism network limits its application. In this study, furans (furfural, 5-hydroxymethylfurfural), phenols (vanillin, vanillate), and organic acids (acetic acid), which mimic the complex components of the non-sugar compounds in pretreated biomass hydrolysate, were mixed with benzoate or used individually as carbon sources to investigate the growth and lipid accumulation of R. jostii RHA1. Fermentation kinetics, specific growth rates (h-1) and lipid yield (g(g) -1, g(mmol)-1), for each selected biomass-derived compound were compared for lipid production. The order of the specific growth rates (h-1) was benzoate > acetic acid > vanillate > vanillin. Higher consumption rate of benzoate than that of vanillate, as well as different lipid yield from them, suggested the preference of strain employing two branches of ß-ketoadipate pathway and plausibly distinct carbon routing to lipid biosynthesis. And acetic acid showed the lowest lipid yield (g(mmol)-1) indicating less carbon contributed to lipid production. The highest lipid content (0.46 g lipid/g CDW) was achieved using benzoate as a main carbon source in the presence of 5-hydroxymethylfurfural (5-HMF). The generated lipids predominantly contained C16:0 and C17:0 fatty acids. The concentration of furfural and 5-HMF in fermentation broth decreased individually or simultaneously with benzoate catabolism. NMR results revealed the oxidation of furfural and 5-HMF by R. jostii RHA1. This study provides new insights into the catabolism and metabolism of non-sugar compounds derived from biomass by Rhodococcus in terms of growth and lipid production, facilitating its application to 2nd generation biofuel production.

Li, Xiaolu↗

Different geometrical arrangements in carboxylate coordination polymers of flexible dicarboxylic acid

Dicarboxylate coordination polymers (1-5) of Mn(II), Ni(II), Cu(II), Zn(II) and Cd(II), respectively, derived from (7-carboxymethoxy-naphthalen-2-yloxy)-acetic acid (L{sub 1}H{sub 2}) are synthesized and characterized. Depending on the coordination sites around the metal centers and coordination mode of the ligand, dimensionality of these polymers varies. The dicarboxylates adopt three spatial orientations: in-plane linear coordination, out-of-plane cis coordination and out-of-plane trans coordination mode. Both the cis and trans out-of-plane coordination modes are found to exist only if the ancillary ligand pyridine is coordinated to the metal ion. When the aquoligand coordinates the in-plane linear coordination mode of L{sub 1} predominates. The coordination polymers 4 and 5 show photoluminescence in solution. The dicarboxylate of (5-carboxymethoxy-naphthalen-1-yloxy)-acetic acid (L{sub 2}H{sub 2}) does not form coordination polymer under ambient conditions, but prefers to remain as uncoordinated anion providing hydrophobic confinement to hexa-aquometal(II) cation. Compound 3 crystallizes in P2{sub 1} space group and it shows broadband ultra-violet fluorescence centered at 352.9 nm on focusing 632.8 nm He:Ne laser. - Graphical abstract: Different geometrical arrangements in coordination polymers derived from (7-carboxymethoxy-naphthalen-2-yloxy)-acetic acid of metal ions Mn(II), Ni(II), Cu(II), Zn(II) and Cd(II) are presented. The (5-carboxymethoxy-naphthalen-1-yloxy)-acetic acid led to hexa-aquo cadmium(II) dicarboxylate. Highlights: > Structural and spectroscopic characterizations of five dicarboxylate coordination polymers of (7-carboxymethoxy-naphthalen-2-yloxy)-acetic acid with different metal ions are presented. > Different geometrical arrangements of coordination polymers stabilized in solid state are described. > Photoluminescence properties of the polymers are shown. > NLO property of a copper coordination polymer is described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inhibition of poly(ADP-ribose)polymerase-1 and DNA repair by uranium

Uranium has radiological and non-radiological effects within biological systems and there is increasing evidence for genotoxic and carcinogenic properties attributable to uranium through its heavy metal properties. In this study, we report that low concentrations of uranium (as uranyl acetate; < 10 μM) is not cytotoxic to human embryonic kidney cells or normal human keratinocytes; however, uranium exacerbates DNA damage and cytotoxicity induced by hydrogen peroxide, suggesting that uranium may inhibit DNA repair processes. Concentrations of uranyl acetate in the low micromolar range inhibited the zinc finger DNA repair protein poly(ADP-ribose) polymerase (PARP)-1 and caused zinc loss from PARP-1 protein. Uranyl acetate exposure also led to zinc loss from the zinc finger DNA repair proteins Xeroderma Pigmentosum, Complementation Group A (XPA) and aprataxin (APTX). In keeping with the observed inhibition of zinc finger function of DNA repair proteins, exposure to uranyl acetate enhanced retention of induced DNA damage. Co-incubation of uranyl acetate with zinc largely overcame the impact of uranium on PARP-1 activity and DNA damage. These findings present evidence that low concentrations of uranium can inhibit DNA repair through disruption of zinc finger domains of specific target DNA repair proteins. This may provide a mechanistic basis to account for the published observations that uranium exposure is associated with DNA repair deficiency in exposed human populations. - Highlights: • Low micromolar concentration of uranium inhibits polymerase-1 (PARP-1) activity. • Uranium causes zinc loss from multiple DNA repair proteins. • Uranium enhances retention of DNA damage caused by ultraviolet radiation. • Zinc reverses the effects of uranium on PARP activity and DNA damage repair.

60 APPLIED LIFE SCIENCES↗

Co-digestion of wheat and rye bread suspensions with source-sorted municipal biowaste

Graphical abstract: Volatile fatty acid spectra of acidified WBS, RBS or FBS differ, but methanogenesis is similar. Display Omitted - Highlights: • Biogas improvement by co-digestion of wheat and rye bread. • Increased population density at high organic loading rates. • Less Pelotomaculum but increased numbers of Syntrophobacter and Smithella found in rye bread reactor. • Replacement of Methanosarcinales by acetate-oxidizers in rye bread co-digestion. • Increasing proportion of Methanomicrobiales in biowaste + rye bread reactor. - Abstract: Acidification of wheat bread (WBS), rye bread (RBS) and fresh biowaste suspensions (FBS), leading to lactate+acetate, lactate+acetate+n-buyrate, and acetate+propionate+n-butyrate, respectively, and biogas production as well as population dynamics were investigated. Co-fermentation of FBS (14 kg m{sup −3} d{sup −1} organic loading rate (OLR)) with WBS or RBS was stable up to an OLR of 22 kg m{sup −3} d{sup −1} and resulted in up to 3 times as much biogas. During co-fermentation at more than 20 kg m{sup −3} d{sup −1} OLR the total population increased more than 2-fold, but the originally low share of propionate-oxidizing bacteria significantly decreased. The proportion of methanogens also decreased. Whereas the proportion of Methanosarcinales to Methanomicrobiales in biowaste and biowaste+WBS remained constant, Methanosarcinales and in particular Methanosaeta spec. in the biowaste+RBS assay almost completely disappeared. Methanomicrobiales increased instead, indicating propionate oxidation via acetate cleavage to CO{sub 2} and hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of nitric acid treatment in different media on X-ray structural parameters of coal

The treatment of coal with nitric acid in aqueous and non-aqueous media introduces changes in the chemical and spatial structure of the organic mass. Four coals of different rank have been treated with nitric acid in aqueous and glacial acetic acid media for assessing the changes in the structural parameters by the X-ray diffraction (XRD) technique. Slow-scan XRD has been performed for the raw and treated coals, and X-ray structural parameters (d002, Lc, and Nc) and aromaticity (fa) have been determined by profile-fitting software. Considerable variation of the structural parameters has been observed with respect to the raw coals. The d002 values have decreased in aqueous medium but increased in acetic acid medium; however, Lc, Nc, and fa values have increased in aqueous medium but decreased in acetic acid medium. It is also observed that considerable oxidation takes place during nitric acid treatment in aqueous medium, but nitration is the predominant phenomenon in acetic acid medium. Disordering of the coal structure increases in acetic acid medium, but a reverse trend is observed in the aqueous medium. As a result, structurally modified coals (SMCs) are derived as new coal-derived substances. 15 refs., 6 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Sulfur Isotopes as Indicators of Amended Bacterial Sulfate Reduction Processes Influencing Field Scale Uranium Bioremediation

Aqueous uranium (U(VI)) concentrations in a contaminated aquifer in Rifle Colorado have been successfully lowered through electron donor amended bioreduction. Samples collected during the acetate amendment experiment were analyzed for aqueous concentrations of Fe(II), sulfate, sulfide, acetate, U(VI), and δ34S of sulfate and sulfide to explore the utility of sulfur isotopes as indicators of in situ acetate amended sulfate and uranium bioreduction processes. Enrichment of up to 7‰ in δ34S of sulfate in down-gradient monitoring wells indicates a transition to elevated bacterial sulfate reduction. A depletion in Fe(II), sulfate, and sulfide concentrations at the height of sulfate reduction, along with an increase in the δ34S of sulfide to levels approaching the d34S values of sulfate, indicates sulfate limited conditions concurrent with a rebound in U(VI) concentrations. Upon cessation of acetate amendment, sulfate and sulfide concentrations increased, while δ34S values of sulfide returned to less than -20‰ and sulfate δ34S decreased to near-background values, indicating lower levels of sulfate reduction accompanied by a corresponding drop in U(VI). Results indicate a transition between electron donor and sulfate-limited conditions at the height of sulfate reduction and suggest stability of biogenic FeS precipitates following the end of acetate amendment.

54 ENVIRONMENTAL SCIENCES↗

Synthesis of polymer electrolyte membranes from cellulose acetate/poly(ethylene oxide)/LiClO{sub 4} for lithium ion battery application

This study was conducted to determine the effect of cellulose acetate on poly(ethylene oxide)-LiClO{sub 4} membranes as the polymer electrolyte. Cellulose acetate is used as an additive to increase ionic conductivity and mechanical property of polymer electrolyte membranes. The increase the percentage of cellulose acetate in membranes do not directly effect on the ionic conductivity, and the highest ionic conductivity of membranes about 5,7 × 10{sup −4} S/cm was observed in SA/PEO/LiClO{sub 4} membrane with cellulose ratio of 10-25% (w/w). Cellulose acetate in membranes increases mechanical strength of polymer electrolyte membranes. Based on TGA analysis, this polymer electrolyte thermally is stable until 270 °C. The polymer electrolyte membrane prepared by blending the cellulose acetate, poly(ethylene oxide), and lithium chlorate could be potentially used as a polymer electrolyte for lithium ion battery application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microbial dynamics in upflow anaerobic sludge blanket (UASB) bioreactor granules in response to short-term changes in substrate feed

The complexity and diversity of the microbial communities in biogranules from an upflow anaerobic sludge blanket (UASB) bioreactor were determined in response to short-term changes in substrate feeds. The reactor was fed simulated brewery wastewater (SBWW) (70% ethanol, 15% acetate, 15% propionate) for 1.5 months (phase 1), acetate / sulfate for 2 months (phase 2), acetate-alone for 3 months (phase 3), and then a return to SBWW for 2 months (phase 4). Performance of the reactor remained relatively stable throughout the experiment as shown by COD removal and gas production. 16S rDNA, methanogen-associated mcrA and sulfate reducer-associated dsrAB genes were PCR amplified, then cloned and sequenced. Sequence analysis of 16S clone libraries showed a relatively simple community composed mainly of the methanogenic Archaea (Methanobacterium and Methanosaeta), members of the Green Non-Sulfur (Chloroflexi) group of Bacteria, followed by fewer numbers of Syntrophobacter, Spirochaeta, Acidobacteria and Cytophaga-related Bacterial sequences. Methanogen-related mcrA clone libraries were dominated throughout by Methanobacter and Methanospirillum related sequences. Although not numerous enough to be detected in our 16S rDNA libraries, sulfate reducers were detected in dsrAB clone libraries, with sequences related to Desulfovibrio and Desulfomonile. Community diversity levels (Shannon-Weiner index) generally decreased for all libraries in response to a change from SBWW to acetate-alone feed. But there was a large transitory increase noted in 16S diversity at the two-month sampling on acetate-alone, entirely related to an increase in Bacterial diversity. Upon return to SBWW conditions in phase 4, all diversity measures returned to near phase 1 levels.

09 BIOMASS FUELS↗