Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “55”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Interactions between silver nanoparticles and polyvinyl alcohol nanofibers

The interaction of polyvinylalcohol (PVA) nanofibers with silver (Ag) nanoparticles (mean diameter 8nm) has been modeled using density functional theory (DFT) calculations. The physical adsorption of PVA through the hydroxyl group, to the Ag, and its corresponding molecular orientation was compared with experimental results obtained from surface-enhanced Raman scattering (SERS) studies of the same material. A good agreement was found between the computational model of the vibrational spectrum of the adsorbate and the experimentally observed SERS. In general, aliphatic capping molecules are used to passivate the surface of Ag{sub 55} nanocrystals (55 = atomic number of Ag). In this study, a DFT simulation was employed to show binding energies and electron contour map analyses of Ag{sub 55} with PVA. Here we show that the PVA interacts with the Ag nanoparticle's surface, through the OH group, thereby contributing significantly to the increase in SERS activity.

36 MATERIALS SCIENCE↗

Strength and structural phase transitions of gadolinium at high pressure from radial X-ray diffraction

Lattice strength and structural phase transitions of gadolinium (Gd) were determined under nonhydrostatic compression up to 55 GPa using an angle-dispersive radial x-ray diffraction technique in a diamond-anvil cell at room temperature. Three new phases of fcc structure, dfcc structure, and new monoclinic structure were observed at 25 GPa, 34 GPa, and 53 GPa, respectively. The radial x-ray diffraction data yield a bulk modulus K{sub 0} = 36(1) GPa with its pressure derivate K{sub 0}′ = 3.8(1) at the azimuthal angle between the diamond cell loading axis and the diffraction plane normal and diffraction plane ψ = 54.7°. With K{sub 0}′ fixed at 4, the derived K{sub 0} is 34(1) GPa. In addition, analysis of diffraction data with lattice strain theory indicates that the ratio of differential stress to shear modulus (t/G) ranges from 0.011 to 0.014 at pressures of 12–55 GPa. Together with estimated high-pressure shear moduli, our results show that Gd can support a maximum differential stress of 0.41 GPa, while it starts to yield to plastic deformation at 16 GPa under uniaxial compression. The yield strength of Gd remains approximately a constant with increasing pressure, and reaches 0.46 GPa at 55 GPa.

36 MATERIALS SCIENCE↗

System-on-chip approach microwave imaging reflectometer on DIII-D tokamak

System-on-chip millimeter wave integrated circuit technology is used on the two-dimensional millimeter-wave imaging reflectometer (MIR) upgrade for density fluctuation imaging on the DIII-D tokamak fusion plasma. Customized CMOS chips have been successfully developed for the transmitter module and receiver module array, covering the 55–75 GHz working band. The transmitter module has the capability of simultaneously launching eight tunable probe frequencies (>0 dBm output power each). The receiver enclosure contains 12 receiver modules in two vertical lines. The quasi-optical local oscillator coupling of previous MIR systems has been replaced with an internal active frequency multiplier chain for improved local oscillator power delivery and flexible installation in a narrow space together with improved shielding against electromagnetic interference. The 55–75 GHz low noise amplifier, used between the receiver antenna and the first-stage mixer, significantly improves module sensitivity and suppresses electronics noise. The receiver module has a 20 dB gain improvement compared with the mini-lens approach and better than –75 dBm sensitivity, and its electronics noise temperature has been reduced from 55 000 K down to 11 200 K. Further, the V-band MIR system is developed for co-located multi-field investigation of MHD-scale fluctuations in the pedestal region with W-band electron cyclotron emission imaging on DIII-D tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

STATISTICAL STUDY OF THE EARLY SOLAR SYSTEM'S INSTABILITY WITH FOUR, FIVE, AND SIX GIANT PLANETS

Several properties of the solar system, including the wide radial spacing and orbital eccentricities of giant planets, can be explained if the early solar system evolved through a dynamical instability followed by migration of planets in the planetesimal disk. Here we report the results of a statistical study, in which we performed nearly 10{sup 4} numerical simulations of planetary instability starting from hundreds of different initial conditions. We found that the dynamical evolution is typically too violent, if Jupiter and Saturn start in the 3:2 resonance, leading to ejection of at least one ice giant from the solar system. Planet ejection can be avoided if the mass of the transplanetary disk of planetesimals was large (M{sub disk} {approx}> 50 M{sub Earth}), but we found that a massive disk would lead to excessive dynamical damping (e.g., final e{sub 55} {approx}< 0.01 compared to present e{sub 55} = 0.044, where e{sub 55} is the amplitude of the fifth eccentric mode in the Jupiter's orbit), and to smooth migration that violates constraints from the survival of the terrestrial planets. Better results were obtained when the solar system was assumed to have five giant planets initially, and one ice giant, with mass comparable to that of Uranus and Neptune, was ejected into interstellar space by Jupiter. The best results were obtained when the ejected planet was placed into the external 3:2 or 4:3 resonance with Saturn and M{sub disk} {approx_equal} 20 M{sub Earth}. The range of possible outcomes is rather broad in this case, indicating that the present solar system is neither a typical nor expected result for a given initial state, and occurs, in best cases, with only a {approx_equal}5% probability (as defined by the success criteria described in the main text). The case with six giant planets shows interesting dynamics but does offer significant advantages relative to the five-planet case.

79 ASTRONOMY AND ASTROPHYSICS↗

A SUPER-EARTH TRANSITING A NAKED-EYE STAR

We have detected transits of the innermost planet 'e' orbiting 55 Cnc (V = 6.0), based on two weeks of nearly continuous photometric monitoring with the MOST space telescope. The transits occur with the period (0.74 days) and phase that had been predicted by Dawson and Fabrycky, and with the expected duration and depth for the crossing of a Sun-like star by a hot super-Earth. Assuming the star's mass and radius to be 0.963{sup +0.051}{sub -0.029} M{sub sun} and 0.943 {+-} 0.010 R{sub sun}, the planet's mass, radius, and mean density are 8.63 {+-} 0.35 M{sub +}, 2.00 {+-} 0.14 R{sub +}, and 5.9{sup +1.5}{sub -1.1} g cm{sup -3}, respectively. The mean density is comparable to that of Earth, despite the greater mass and consequently greater compression of the interior of 55 Cnc e. This suggests a rock-iron composition supplemented by a significant mass of water, gas, or other light elements. Outside of transits, we detected a sinusoidal signal resembling the expected signal due to the changing illuminated phase of the planet, but with a full range (168 {+-} 70 ppm) too large to be reflected light or thermal emission. This signal has no straightforward interpretation and should be checked with further observations. The host star of 55 Cnc e is brighter than that of any other known transiting planet, which will facilitate future investigations.

79 ASTRONOMY AND ASTROPHYSICS↗

Test of nuclear decay rate variation due to an antineutrino flux

Unexplained variations of the decay rate parameter for weak interaction decays such as β ± decay, electron capture, as well as strong interaction α decay have been reported. Because these variations have been presented by a number of groups, at various locations, using various types of detectors, different isotopes, and over extended periods of time, some researchers have interpreted the source of these variations as not from ambient environmental factors such as temperature, pressure, and humidity but via an unexplained fundamental interaction. The state of decay rate parameter variations experiments is reviewed, and the reported results are placed into a common comparable context by defining a phenomenological cross section. After that we make decay parameter measurements as a function of time at the level of 10 -5 in the presences of an antineutrino flux with an on-off cycle time of ≈ 30 days. This level of precision requires a detailed understanding of both systematic and statistical errors; otherwise, systematic errors in the measurement may mimic the decay events of fundamental interactions. The experiment searched for variation of the $^{54}_{25}$Mn, e - capture decay rate parameter and $^{137}_{55}$Cs, β - decay rate parameter both to a level of precision of 1 part in ≈10 5 by comparing the difference between the decay rate in the presence of an antineutrino flux ≈ 3 x 10 12 $\bar{ν}$ cm -2 s -1 and no flux measurements. The experiment was located 6.53 m from the reactor core of the High Flux Isotope Reactor at the Oak Ridge National Laboratory. Two weak interaction decays, one via electron capture and the other via β - decay, were selected because the final state and the time reverse state each contain a neutrino and antineutrino, covering arguments that the antineutrino flux may interact differently or not at all in one of the cases. The $\gamma$ spectra from both decays were collected and analyzed independently. The measured variation in the decay rate parameters are found to be δλ/λ =(0.034 ± 1.38) x10 -5 for $^{54}_{25}$Mn and δλ/λ =(0.67±1.56) x10 -5 for $^{137}_{55}$Cs. These results are consistent with no measurable decay rate parameter variation due to an antineutrino flux, yielding a 68% confidence level upper limit sensitivity for $^{54}_{25}$Mn δλ/λ ≤ 1.31 x 10 -5 or σ ≤ 1.29 x10 -25 cm 2 in cross section and for $^{137}_{55}$Cs δλ/λ ≤ 2.23 x 10 -5 or σ ≤ 5.69 x10 -27 cm 2 . The cross-section upper limit obtained in these null or no observable effect measurements are ≈ 10 4 times more sensitive than past experiments reporting positive results in 54 Mn and 137 Cs. . .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Low-lying level structure of $^{56}\mathbf{Cu}$ and its implications for the $\mathit{rp}$ process

The low-lying energy levels of proton-rich Cu 56 have been extracted using in-beam γ -ray spectroscopy with the state-of-the-art γ -ray tracking array GRETINA in conjunction with the S800 spectrograph at the National Superconducting Cyclotron Laboratory at Michigan State University. Excited states in Cu 56 serve as resonances in the Ni 55 ( p , γ ) Cu 56 reaction, which is a part of the rp process in type-I x-ray bursts. To resolve existing ambiguities in the reaction Q value, a more localized isobaric multiplet mass equation (IMME) fit is used, resulting in Q = 639 ± 82 keV. We derive the first experimentally constrained thermonuclear reaction rate for Ni 55 ( p , γ ) Cu 56 . We discover that, with this new rate, the rp process may bypass the Ni 56 waiting point via the Ni 55 ( p , γ ) reaction for typical x-ray burst conditions with a branching of up to ~ 40 % . We further identify additional nuclear physics uncertainties that need to be addressed before drawing final conclusions about the rp -process reaction flow in the Ni 56 region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High-Precision Mass Measurement of Cu 56 and the Redirection of the r p -Process Flow

We report the mass measurement of 56 Cu, using the LEBIT 9.4 T Penning trap mass spectrometer at the National Superconducting Cyclotron Laboratory at Michigan State University. The mass of 56 Cu is critical for constraining the reaction rates of the 55 Ni(p,y), 56 Cu(p,y), 57 Zn(β + ) 57 Cu bypass around the 56 Ni waiting point. Previous recommended mass excess values have disagreed by several hundred keV. Our new value, ME = -38626.7(7.1) keV, is a factor of 30 more precise than the extrapolated value suggested in the 2012 atomic mass evaluation [Chin. Phys. C 36, 1603 (2012)], and more than a factor of 12 more precise than values calculated using local mass extrapolations, while agreeing with the newest 2016 atomic mass evaluation value [Chin. Phys. C 41, 030003 (2017)]. The new experimental average, using our new mass and the value from AME2016, is used to calculate the astrophysical 55 Ni(p,y) and 56 Cu(p,y) forward and reverse rates and perform reaction network calculations of the rp process. These show that the rp-process flow redirects around the 56 Ni waiting point through the 55 Ni(p,y) route, allowing it to proceed to higher masses more quickly and resulting in a reduction in ashes around this waiting point and an enhancement to higher mass ashes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Precision Mass Measurements of Neutron-Rich Scandium Isotopes Refine the Evolution of N = 32 and N = 34 Shell Closures

In this work, we report high-precision mass measurements of 50–55 Sc isotopes performed at the LEBIT facility at NSCL and at the TITAN facility at TRIUMF. Our results provide a substantial reduction of their uncertainties and indicate significant deviations, up to 0.7 MeV, from the previously recommended mass values for 53–55 Sc. The results of this work provide an important update to the description of emerging closed-shell phenomena at neutron numbers N = 32 and N = 34 above proton-magic Z = 20. In particular, they finally enable a complete and precise characterization of the trends in ground state binding energies along the N = 32 isotone, confirming that the empirical neutron shell gap energies peak at the doubly magic 52 Ca. Moreover, our data, combined with other recent measurements, do not support the existence of a closed neutron shell in 55 Sc at N = 34. The results were compared to predictions from both ab initio and phenomenological nuclear theories, which all had success describing N = 32 neutron shell gap energies but were highly disparate in the description of the N = 34 isotone.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparison of power spectra for tomosynthesis projections and reconstructed images

Burgess et al. [Med. Phys. 28, 419-437 (2001)] showed that the power spectrum of mammographic breast background follows a power law and that lesion detectability is affected by the power-law exponent {beta} which measures the amount of structure in the background. Following the study of Burgess et al., the authors measured and compared the power-law exponent of mammographic backgrounds in tomosynthesis projections and reconstructed slices to investigate the effect of tomosynthesis imaging on background structure. Our data set consisted of 55 patient cases. For each case, regions of interest (ROIs) were extracted from both projection images and reconstructed slices. The periodogram of each ROI was computed by taking the squared modulus of the Fourier transform of the ROI. The power-law exponent was determined for each periodogram and averaged across all ROIs extracted from all projections or reconstructed slices for each patient data set. For the projections, the mean {beta} averaged across the 55 cases was 3.06 (standard deviation of 0.21), while it was 2.87 (0.24) for the corresponding reconstructions. The difference in {beta} for a given patient between the projection ROIs and the reconstructed ROIs averaged across the 55 cases was 0.194, which was statistically significant (p<0.001). The 95% CI for the difference between the mean value of {beta} for the projections and reconstructions was [0.170, 0.218]. The results are consistent with the observation that the amount of breast structure in the tomosynthesis slice is reduced compared to projection mammography and that this may lead to improved lesion detectability.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Dose optimization in pediatric cardiac x-ray imaging

Purpose: The aim of this research was to explore x-ray beam parameters with intent to optimize pediatric x-ray settings in the cardiac catheterization laboratory. This study examined the effects of peak x-ray tube voltage (kVp) and of copper (Cu) x-ray beam filtration independently on the image quality to dose balance for pediatric patient sizes. The impact of antiscatter grid removal on the image quality to dose balance was also investigated. Methods: Image sequences of polymethyl methacrylate phantoms approximating chest sizes typical of pediatric patients were captured using a modern flat-panel receptor based x-ray imaging system. Tin was used to simulate iodine-based contrast medium used in clinical procedures. Measurements of tin detail contrast and flat field image noise provided the contrast to noise ratio. Entrance surface dose (ESD) and effective dose (E) measurements were obtained to calculate the figure of merit (FOM), CNR{sup 2}/dose, which evaluated the dose efficiency of the x-ray parameters investigated. The kVp, tube current (mA), and pulse duration were set manually by overriding the system's automatic dose control mechanisms. Images were captured with 0, 0.1, 0.25, 0.4, and 0.9 mm added Cu filtration, for 50, 55, 60, 65, and 70 kVp with the antiscatter grid in place, and then with it removed. Results: For a given phantom thickness, as the Cu filter thickness was increased, lower kVp was favored. Examining kVp alone, lower values were generally favored, more so for thinner phantoms. Considering ESD, the 8.5 cm phantom had the highest FOM at 50 kVp using 0.4 mm of Cu filtration. The 12 cm phantom had the highest FOM at 55 kVp using 0.9 mm Cu, and the 16 cm phantom had highest FOM at 55 kVp using 0.4 mm Cu. With regard to E, the 8.5 and 12 cm phantoms had the highest FOM at 50 kVp using 0.4 mm of Cu filtration, and the 16 cm phantom had the highest FOM at 50 kVp using 0.25 mm Cu. Antiscatter grid removal improved the FOM for a given set of x-ray conditions. Under aforesaid optimal settings, the 8.5 cm phantom FOM improved by 24% and 33% for ESD and E, respectively. Corresponding improvements were 26% and 24% for the 12 cm phantom and 6% and 15% for the 16 cm phantom. Conclusions: For pediatric patients, using 0.25-0.9 mm Cu filtration in the x-ray beam while maintaining 50-55 kVp, depending on patient size, provided optimal x-ray image quality to dose ratios. These settings, adjusted for x-ray tube loading limits and clinically acceptable image quality, should provide a useful strategy for optimizing iodine contrast agent based cardiac x-ray imaging. Removing the antiscatter grid improved the FOM for the 8.5 and 12 cm phantoms, therefore grid removal is recommended for younger children. Improvement for the 16 cm phantom declined into the estimated margin of error for the FOM; the need for grid removal for older children would depend on practical feasibility in the clinical environment.

60 APPLIED LIFE SCIENCES↗

Digital tomosynthesis (DTS) for verification of target position in early stage lung cancer patients

Purpose: The ability to verify intrafraction tumor position is clinically useful for hypofractionated treatments. Short arc kV digital tomosynthesis (DTS) could facilitate more frequent target verification. The authors used DTS combined with triangulation to determine the mean temporal position of small-volume lung tumor targets treated with stereotactic radiotherapy. DTS registration results were benchmarked against online clinical localization using registration between free-breathing cone-beam computed tomography (CBCT) and the average intensity projection (AvIP) of the planning 4DCT.Methods: In this retrospective study, 76 sets of kV-projection images from online CBCT scans of 13 patients were used to generate DTS image slices (CB-DTS) with nonclinical research software (DTS Toolkit, Varian Medical Systems). Three-dimensional tumor motion was 1.3–4 mm in six patients and 6.1–25.4 mm in seven patients on 4DCT (significant difference in the mean of the groups, P < 0.01). The 4DCT AvIP was used to digitally reconstruct the Reference-DTS. DTS registration and DTS registration combined with triangulation were investigated. Progressive shortening of total DTS arc lengths from 95° to 35° around 0° gantry position was evaluated for different scenarios: DTS registration using the entire arc; DTS registration plus triangulation using two nonoverlapping arcs; and for 55° and 45° total gantry rotation, DTS registration plus triangulation using two overlapping arcs. Finally, DTS registration plus triangulation performed at eight gantry angles, each separated by 45° was evaluated using full fan kV projection data for one patient with an immobile tumor and five patients with mobile tumors.Results: For DTS registration alone, shortening arc length did not influence accuracy in X- and Y-directions, but in Z-direction, mean deviations from online CBCT localization systematically increased for shorter arc length (P < 0.05). For example, using a 95° arc mean DTS-CBCT difference was 0.8 mm (1 SD = 0.6 mm) and for a 35° arc the mean was 2.4 mm (1 SD = 1.7 mm). DTS plus triangulation using nonoverlapping-arcs increased accuracy in Z-direction for tested arc lengths ≤55° (P < 0.01). Overlapping arcs increased accuracy in Y-direction for tumors with motion >4 mm (P < 0.02) but increased Z-direction accuracy was only observed with 55° total gantry rotation. The 95th percentile deviations with this overlapping technique in X-, Y-, and Z-directions were 1.3, 2.0, and 2.5 mm, respectively. For the five patients with mobile tumors where DTS + triangulation was performed with 45° intervals, the pooled deviation from online CBCT correction showed, for X-, Y-, and Z-directions, mean of 1.1 mm, standard deviations (SD) of 0.9, 1.0, and 0.9 mm, respectively. The mean + 2 SD was <3 mm for each direction.Conclusions: Short-arc DTS verification of time averaged lung tumor position is feasible using free-breathing kV projection data and the AvIP of the 4DCT as a reference. Observed differences between DTS and online CBCT registration with AvIP were ≤3 mm (mean + 2 SD), however, the increased temporal resolution of DTS + triangulation also identified short period deviations from the average target position on the CBCT. Short-arc DTS appears promising for intrafraction tumor position monitoring during stereotactic lung radiotherapy delivered with a rotational technique.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

High temperature performance of surface-treated Li{sub 1.1}(Ni{sub 0.15}Co{sub 0.1}Mn{sub 0.55})O{sub 1.95} layered oxide.

The electrochemical performance of pristine and AlF{sub 3}-coated Li{sub 1.1}Ni{sub 0.15}Co{sub 0.1}Mn{sub 0.55}O{sub 1.95} cathodes is reported for cells cycled at 25 and 55 C. In a half-cell configuration, a nanolayer coating of AlF{sub 3} on the Li{sub 1.1}Ni{sub 0.15}Co{sub 0.1}Mn{sub 0.55}O{sub 1.95} stabilizes the capacity on cycling. However, in cell tests with metallic lithium anodes, the initial coulombic efficiency decreased slightly at both 25 and 55 C for AlF{sub 3}-coated Li{sub 1.1}Ni{sub 0.15}Co{sub 0.1}Mn{sub 0.55}O{sub 1.95} in comparison to the pristine material. For cells constructed with graphite instead of lithium anodes, the capacity stability improved with cycling for the coated cathode materials. Transition-metal dissolution was more pronounced for the AlF{sub 3}-coated sample when stored at 55 C in electrolytes. For both the pristine and AlF{sub 3}-coated samples, there was no extra capacity loss due to the elevated temperature. Around 10% capacity gain of the cathode materials at elevated temperature is assumed to be due to improved thermodynamic activation.

36 MATERIALS SCIENCE↗

Materials Data on Ni7(PO4)6 by Materials Project

Ni7(PO4)6 crystallizes in the monoclinic C2/m space group. The structure is three-dimensional. there are three inequivalent Ni+2.57+ sites. In the first Ni+2.57+ site, Ni+2.57+ is bonded to six O2- atoms to form NiO6 octahedra that share corners with three NiO6 octahedra, corners with four PO4 tetrahedra, an edgeedge with one NiO6 octahedra, and an edgeedge with one PO4 tetrahedra. The corner-sharing octahedra tilt angles range from 55–61°. There are a spread of Ni–O bond distances ranging from 2.01–2.10 Å. In the second Ni+2.57+ site, Ni+2.57+ is bonded to six O2- atoms to form NiO6 octahedra that share corners with four equivalent NiO6 octahedra, corners with two equivalent PO4 tetrahedra, an edgeedge with one NiO6 octahedra, and edges with two equivalent PO4 tetrahedra. The corner-sharing octahedra tilt angles range from 55–61°. There are a spread of Ni–O bond distances ranging from 2.05–2.15 Å. In the third Ni+2.57+ site, Ni+2.57+ is bonded to six O2- atoms to form NiO6 octahedra that share corners with four equivalent NiO6 octahedra and corners with six PO4 tetrahedra. The corner-sharing octahedral tilt angles are 59°. There are two shorter (1.99 Å) and four longer (2.09 Å) Ni–O bond lengths. There are two inequivalent P5+ sites. In the first P5+ site, P5+ is bonded to four O2- atoms to form PO4 tetrahedra that share corners with five NiO6 octahedra and an edgeedge with one NiO6 octahedra. The corner-sharing octahedra tilt angles range from 30–59°. There are a spread of P–O bond distances ranging from 1.52–1.58 Å. In the second P5+ site, P5+ is bonded to four O2- atoms to form PO4 tetrahedra that share corners with three NiO6 octahedra and edges with two equivalent NiO6 octahedra. The corner-sharing octahedra tilt angles range from 47–55°. There is one shorter (1.51 Å) and three longer (1.57 Å) P–O bond length. There are seven inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted trigonal planar geometry to two equivalent Ni+2.57+ and one P5+ atom. In the second O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Ni+2.57+ and one P5+ atom. In the third O2- site, O2- is bonded in a 3-coordinate geometry to two equivalent Ni+2.57+ and one P5+ atom. In the fourth O2- site, O2- is bonded in a bent 150 degrees geometry to one Ni+2.57+ and one P5+ atom. In the fifth O2- site, O2- is bonded in a distorted trigonal planar geometry to two Ni+2.57+ and one P5+ atom. In the sixth O2- site, O2- is bonded in a distorted trigonal planar geometry to two Ni+2.57+ and one P5+ atom. In the seventh O2- site, O2- is bonded in a distorted trigonal planar geometry to two Ni+2.57+ and one P5+ atom.

36 MATERIALS SCIENCE↗

Materials Data on Li31Zr2Sb13 by Materials Project

Li31Zr2Sb13 is alpha bismuth trifluoride-derived structured and crystallizes in the monoclinic Cm space group. The structure is three-dimensional. there are thirty-one inequivalent Li1+ sites. In the first Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with three equivalent LiSb6 octahedra, corners with three equivalent ZrSb4 tetrahedra, corners with thirteen LiSb4 tetrahedra, and edges with six ZrSb4 tetrahedra. The corner-sharing octahedral tilt angles are 53°. There are a spread of Li–Sb bond distances ranging from 2.85–2.97 Å. In the second Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with six LiSb6 octahedra, corners with three equivalent ZrSb4 tetrahedra, corners with thirteen LiSb4 tetrahedra, edges with six LiSb4 tetrahedra, and faces with three equivalent LiSb6 octahedra. The corner-sharing octahedral tilt angles are 52°. There are three shorter (2.78 Å) and one longer (2.90 Å) Li–Sb bond lengths. In the third Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with nine LiSb6 octahedra, corners with sixteen LiSb4 tetrahedra, edges with six LiSb4 tetrahedra, and faces with four LiSb6 octahedra. The corner-sharing octahedra tilt angles range from 54–59°. There are one shorter (2.80 Å) and three longer (2.86 Å) Li–Sb bond lengths. In the fourth Li1+ site, Li1+ is bonded to six Sb3- atoms to form LiSb6 octahedra that share corners with three equivalent LiSb6 octahedra, corners with three equivalent ZrSb4 tetrahedra, corners with twenty-one LiSb4 tetrahedra, edges with nine LiSb6 octahedra, and faces with eight LiSb4 tetrahedra. The corner-sharing octahedral tilt angles are 5°. There are a spread of Li–Sb bond distances ranging from 3.18–3.31 Å. In the fifth Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with six equivalent LiSb6 octahedra, a cornercorner with one ZrSb4 tetrahedra, corners with fifteen LiSb4 tetrahedra, edges with three equivalent LiSb4 tetrahedra, edges with three equivalent ZrSb4 tetrahedra, and a faceface with one LiSb6 octahedra. The corner-sharing octahedral tilt angles are 55°. There are three shorter (2.84 Å) and one longer (2.85 Å) Li–Sb bond lengths. In the sixth Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with six equivalent LiSb6 octahedra, corners with sixteen LiSb4 tetrahedra, edges with six LiSb4 tetrahedra, and a faceface with one LiSb6 octahedra. The corner-sharing octahedral tilt angles are 54°. There are one shorter (2.78 Å) and three longer (2.85 Å) Li–Sb bond lengths. In the seventh Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with nine LiSb6 octahedra, a cornercorner with one ZrSb4 tetrahedra, corners with fifteen LiSb4 tetrahedra, edges with six LiSb4 tetrahedra, and faces with four LiSb6 octahedra. The corner-sharing octahedra tilt angles range from 50–56°. There are three shorter (2.80 Å) and one longer (2.83 Å) Li–Sb bond lengths. In the eighth Li1+ site, Li1+ is bonded to six Sb3- atoms to form distorted LiSb6 octahedra that share corners with three equivalent LiSb6 octahedra, corners with twenty-four LiSb4 tetrahedra, edges with nine LiSb6 octahedra, and faces with eight LiSb4 tetrahedra. The corner-sharing octahedral tilt angles are 5°. There are a spread of Li–Sb bond distances ranging from 3.19–3.38 Å. In the ninth Li1+ site, Li1+ is bonded in a 6-coordinate geometry to three equivalent Sb3- atoms. All Li–Sb bond lengths are 3.14 Å. In the tenth Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with six LiSb6 octahedra, corners with sixteen LiSb4 tetrahedra, edges with six LiSb4 tetrahedra, and faces with three equivalent LiSb6 octahedra. The corner-sharing octahedra tilt angles range from 52–57°. There are a spread of Li–Sb bond distances ranging from 2.81–2.94 Å. In the eleventh Li1+ site, Li1+ is bonded to four Sb3- atoms to form a mixture of corner and edge-sharing LiSb4 tetrahedra. There are one shorter (2.82 Å) and three longer (2.92 Å) Li–Sb bond lengths. In the twelfth Li1+ site, Li1+ is bonded to four Sb3- atoms to form a mixture of corner and edge-sharing LiSb4 tetrahedra. There are three shorter (2.83 Å) and one longer (2.85 Å) Li–Sb bond lengths. In the thirteenth Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with three equivalent LiSb6 octahedra, corners with sixteen LiSb4 tetrahedra, and edges with six LiSb4 tetrahedra. The corner-sharing octahedral tilt angles are 57°. There are a spread of Li–Sb bond distances ranging from 2.77–3.02 Å. In the fourteenth Li1+ site, Li1+ is bonded to four Sb3- atoms to form a mixture of corner and edge-sharing LiSb4 tetrahedra. There are a spread of Li–Sb bond distances ranging from 2.80–2.85 Å. In the fifteenth Li1+ site, Li1+ is bonded to four Sb3- atoms to form a mixture of corner and edge-sharing LiSb4 tetrahedra. There are a spread of Li–Sb bond distances ranging from 2.88–2.90 Å. In the sixteenth Li1+ site, Li1+ is bonded to four Sb3- atoms to form a mixture of corner and edge-sharing LiSb4 tetrahedra. There are a spread of Li–Sb bond distances ranging from 2.81–2.85 Å. In the seventeenth Li1+ site, Li1+ is bonded to four Sb3- atoms to form a mixture of corner and edge-sharing LiSb4 tetrahedra. There are a spread of Li–Sb bond distances ranging from 2.88–2.90 Å. In the eighteenth Li1+ site, Li1+ is bonded to four Sb3- atoms to form a mixture of corner and edge-sharing LiSb4 tetrahedra. There are three shorter (2.83 Å) and one longer (2.85 Å) Li–Sb bond lengths. In the nineteenth Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with three equivalent LiSb6 octahedra, corners with sixteen LiSb4 tetrahedra, and edges with six LiSb4 tetrahedra. The corner-sharing octahedral tilt angles are 57°. There are a spread of Li–Sb bond distances ranging from 2.77–3.03 Å. In the twentieth Li1+ site, Li1+ is bonded to four Sb3- atoms to form a mixture of corner and edge-sharing LiSb4 tetrahedra. There are one shorter (2.81 Å) and three longer (2.92 Å) Li–Sb bond lengths. In the twenty-first Li1+ site, Li1+ is bonded in a 6-coordinate geometry to three equivalent Sb3- atoms. All Li–Sb bond lengths are 3.13 Å. In the twenty-second Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with three equivalent LiSb6 octahedra, corners with sixteen LiSb4 tetrahedra, edges with six LiSb4 tetrahedra, and faces with three equivalent LiSb6 octahedra. The corner-sharing octahedral tilt angles are 51°. There are three shorter (2.81 Å) and one longer (2.92 Å) Li–Sb bond lengths. In the twenty-third Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with six equivalent LiSb6 octahedra, corners with sixteen LiSb4 tetrahedra, edges with six LiSb4 tetrahedra, and a faceface with one LiSb6 octahedra. The corner-sharing octahedral tilt angles are 54°. There are one shorter (2.77 Å) and three longer (2.85 Å) Li–Sb bond lengths. In the twenty-fourth Li1+ site, Li1+ is bonded to six Sb3- atoms to form distorted LiSb6 octahedra that share corners with twenty-four LiSb4 tetrahedra, edges with six equivalent LiSb6 octahedra, and faces with eight LiSb4 tetrahedra. There are a spread of Li–Sb bond distances ranging from 3.19–3.37 Å. In the twenty-fifth Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with nine LiSb6 octahedra, corners with sixteen LiSb4 tetrahedra, edges with six LiSb4 tetrahedra, and a faceface with one LiSb6 octahedra. The corner-sharing octahedra tilt angles range from 55–58°. There are a spread of Li–Sb bond distances ranging from 2.81–2.92 Å. In the twenty-sixth Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with three equivalent LiSb6 octahedra, corners with sixteen LiSb4 tetrahedra, edges with six LiSb4 tetrahedra, and faces with three equivalent LiSb6 octahedra. The corner-sharing octahedral tilt angles are 58°. There are one shorter (2.79 Å) and three longer (2.86 Å) Li–Sb bond lengths. In the twenty-seventh Li1+ site, Li1+ is bonded in a 6-coordinate geometry to three equivalent Sb3- atoms. All Li–Sb bond lengths are 3.18 Å. In the twenty-eighth Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with three equivalent LiSb6 octahedra, corners with three equivalent ZrSb4 tetrahedra, corners with thirteen LiSb4 tetrahedra, edges with six LiSb4 tetrahedra, and faces with three equivalent LiSb6 octahedra. The corner-sharing octahedral tilt angles are 49°. There are a spread of Li–Sb bond distances ranging from 2.78–2.92 Å. In the twenty-ninth Li1+ site, Li1+ is bonded to six Sb3- atoms to form distorted LiSb6 octahedra that share corners with six equivalent ZrSb4 tetrahedra, corners with eighteen LiSb4 tetrahedra, edges with six equivalent LiSb6 octahedra, a faceface with one ZrSb4 tetrahedra, and faces with seven LiSb4 tetrahedra. There are a spread of Li–Sb bond distances ranging from 3.15–3.36 Å. In the thirtieth Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with nine LiSb6 octahedra, corners with sixteen LiSb4 tetrahedra, edges with six LiSb4 tetrahedra, and a faceface with one LiSb6 octahedra. The corner-sharing octahedra tilt angles range from 52–54°. There are one shorter (2.77 Å) and three longer (2.87 Å) Li–Sb bond lengths. In the thirty-first Li1+ site, Li1+ is bonded to four Sb3- atoms to form LiSb4 tetrahedra that share corners with three equivalent LiSb6 octahedra, corners with three equivalent ZrSb4 tetrahedra, corners with thirteen LiSb4 tetrahedra, edges with three equivalent LiSb4 tetrahedra, edges with three equivalent ZrSb4 tetrahedra, and faces with three equivalent LiSb6 octahedra. The corner-sharing octahedral tilt angles are 55°. There are three shorter (2.80 Å) and one longer (2.87 Å) Li–Sb bond lengths. There are two inequivalent Zr4+ sites. In the first Zr4+ site, Zr4+ is bonded to four Sb3- atoms to form ZrSb4 tetrahedra that share corners with six equivalent LiSb6 octahedra, corners with seven LiSb4 tetrahedra, corners with nine ZrSb4 tetrahedra, edges with six LiSb4 tetrahedra, and a faceface with one LiSb6 octahedra. The corner-sharing octahedral tilt angles are 53°. There are one shorter (2.85 Å) and three longer (2.90 Å) Zr–Sb bond lengths. In the second Zr4+ site, Zr4+ is bonded to four Sb3- atoms to form ZrSb4 tetrahedra that share corners with three equivalent LiSb6 octahedra, corners with seven LiSb4 tetrahedra, corners with nine ZrSb4 tetrahedra, and edges with six LiSb4 tetrahedra. The corner-sharing octahedral tilt angles are 54°. There are one shorter (2.83 Å) and three longer (2.85 Å) Zr–Sb bond lengths. There are thirteen inequivalent Sb3- sites. In the first Sb3- site, Sb3- is bonded in a body-centered cubic geometry to eight Li1+ and three equivalent Zr4+ atoms. In the second Sb3- site, Sb3- is bonded in a body-centered cubic geometry to four Li1+ and four Zr4+ atoms. In the third Sb3- site, Sb3- is bonded in a body-centered cubic geometry to ten Li1+ and one Zr4+ atom. In the fourth Sb3- site, Sb3- is bonded in a 8-coordinate geometry to eleven Li1+ atoms. In the fifth Sb3- site, Sb3- is bonded in a distorted body-centered cubic geometry to fourteen Li1+ atoms. In the sixth Sb3- site, Sb3- is bonded in a 8-coordinate geometry to eleven Li1+ atoms. In the seventh Sb3- site, Sb3- is bonded in a body-centered cubic geometry to eight Li1+ atoms. In the eighth Sb3- site, Sb3- is bonded in a body-centered cubic geometry to eight Li1+ atoms. In the ninth Sb3- site, Sb3- is bonded in a 8-coordinate geometry to eleven Li1+ atoms. In the tenth Sb3- site, Sb3- is bonded in a body-centered cubic geometry to eight Li1+ atoms. In the eleventh Sb3- s

36 MATERIALS SCIENCE↗

Materials Data on In2TeO6 by Materials Project

In2TeO6 is Hydrophilite-derived structured and crystallizes in the trigonal P321 space group. The structure is three-dimensional. there are two inequivalent In3+ sites. In the first In3+ site, In3+ is bonded to six O2- atoms to form InO6 octahedra that share corners with four equivalent TeO6 octahedra, corners with six equivalent InO6 octahedra, and an edgeedge with one TeO6 octahedra. The corner-sharing octahedra tilt angles range from 49–55°. There are a spread of In–O bond distances ranging from 2.17–2.25 Å. In the second In3+ site, In3+ is bonded to six O2- atoms to form InO6 octahedra that share corners with two equivalent TeO6 octahedra, corners with six equivalent InO6 octahedra, and edges with two equivalent TeO6 octahedra. The corner-sharing octahedra tilt angles range from 54–55°. There are a spread of In–O bond distances ranging from 2.14–2.24 Å. There are two inequivalent Te6+ sites. In the first Te6+ site, Te6+ is bonded to six equivalent O2- atoms to form TeO6 octahedra that share corners with six equivalent InO6 octahedra and edges with three equivalent InO6 octahedra. The corner-sharing octahedral tilt angles are 55°. All Te–O bond lengths are 1.95 Å. In the second Te6+ site, Te6+ is bonded to six O2- atoms to form TeO6 octahedra that share corners with six equivalent InO6 octahedra and edges with three equivalent InO6 octahedra. The corner-sharing octahedra tilt angles range from 49–50°. All Te–O bond lengths are 1.96 Å. There are three inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted trigonal planar geometry to two In3+ and one Te6+ atom. In the second O2- site, O2- is bonded in a distorted trigonal planar geometry to two In3+ and one Te6+ atom. In the third O2- site, O2- is bonded in a distorted trigonal planar geometry to two In3+ and one Te6+ atom.

36 MATERIALS SCIENCE↗

Materials Data on Ho2CdSe4 by Materials Project

Ho2CdSe4 is Spinel-like structured and crystallizes in the trigonal R3m space group. The structure is three-dimensional. there are ten inequivalent Ho3+ sites. In the first Ho3+ site, Ho3+ is bonded to four Se2- atoms to form HoSe4 tetrahedra that share corners with three equivalent CdSe6 octahedra and corners with nine HoSe6 octahedra. The corner-sharing octahedral tilt angles are 58°. There are three shorter (2.71 Å) and one longer (2.73 Å) Ho–Se bond lengths. In the second Ho3+ site, Ho3+ is bonded to six Se2- atoms to form HoSe6 octahedra that share corners with three HoSe4 tetrahedra, corners with three CdSe4 tetrahedra, edges with two CdSe6 octahedra, and edges with four equivalent HoSe6 octahedra. There are a spread of Ho–Se bond distances ranging from 2.84–2.89 Å. In the third Ho3+ site, Ho3+ is bonded to four Se2- atoms to form HoSe4 tetrahedra that share corners with three equivalent CdSe6 octahedra and corners with nine HoSe6 octahedra. The corner-sharing octahedra tilt angles range from 58–59°. There are three shorter (2.72 Å) and one longer (2.74 Å) Ho–Se bond lengths. In the fourth Ho3+ site, Ho3+ is bonded to six Se2- atoms to form HoSe6 octahedra that share corners with three HoSe4 tetrahedra, corners with three CdSe4 tetrahedra, edges with two CdSe6 octahedra, and edges with four equivalent HoSe6 octahedra. There are a spread of Ho–Se bond distances ranging from 2.84–2.90 Å. In the fifth Ho3+ site, Ho3+ is bonded to four Se2- atoms to form HoSe4 tetrahedra that share corners with three equivalent CdSe6 octahedra and corners with nine HoSe6 octahedra. The corner-sharing octahedra tilt angles range from 58–59°. There are three shorter (2.72 Å) and one longer (2.74 Å) Ho–Se bond lengths. In the sixth Ho3+ site, Ho3+ is bonded to six Se2- atoms to form HoSe6 octahedra that share a cornercorner with one HoSe4 tetrahedra, corners with five CdSe4 tetrahedra, an edgeedge with one CdSe6 octahedra, and edges with five HoSe6 octahedra. There are a spread of Ho–Se bond distances ranging from 2.84–2.89 Å. In the seventh Ho3+ site, Ho3+ is bonded to six Se2- atoms to form HoSe6 octahedra that share corners with six CdSe4 tetrahedra and edges with six HoSe6 octahedra. There are three shorter (2.86 Å) and three longer (2.87 Å) Ho–Se bond lengths. In the eighth Ho3+ site, Ho3+ is bonded to six Se2- atoms to form HoSe6 octahedra that share corners with six CdSe4 tetrahedra and edges with six HoSe6 octahedra. There are three shorter (2.86 Å) and three longer (2.87 Å) Ho–Se bond lengths. In the ninth Ho3+ site, Ho3+ is bonded to six Se2- atoms to form HoSe6 octahedra that share corners with two equivalent HoSe4 tetrahedra, corners with four CdSe4 tetrahedra, an edgeedge with one CdSe6 octahedra, and edges with five HoSe6 octahedra. There are four shorter (2.86 Å) and two longer (2.87 Å) Ho–Se bond lengths. In the tenth Ho3+ site, Ho3+ is bonded to six Se2- atoms to form HoSe6 octahedra that share corners with six CdSe4 tetrahedra and edges with six HoSe6 octahedra. There are three shorter (2.85 Å) and three longer (2.87 Å) Ho–Se bond lengths. There are ten inequivalent Cd2+ sites. In the first Cd2+ site, Cd2+ is bonded to four Se2- atoms to form CdSe4 tetrahedra that share corners with three equivalent CdSe6 octahedra and corners with nine HoSe6 octahedra. The corner-sharing octahedra tilt angles range from 55–57°. There are three shorter (2.68 Å) and one longer (2.74 Å) Cd–Se bond lengths. In the second Cd2+ site, Cd2+ is bonded to four Se2- atoms to form CdSe4 tetrahedra that share corners with three equivalent CdSe6 octahedra and corners with nine HoSe6 octahedra. The corner-sharing octahedra tilt angles range from 55–57°. There are three shorter (2.68 Å) and one longer (2.73 Å) Cd–Se bond lengths. In the third Cd2+ site, Cd2+ is bonded to six Se2- atoms to form CdSe6 octahedra that share corners with three equivalent HoSe4 tetrahedra, corners with three equivalent CdSe4 tetrahedra, and edges with six HoSe6 octahedra. There are three shorter (2.83 Å) and three longer (2.91 Å) Cd–Se bond lengths. In the fourth Cd2+ site, Cd2+ is bonded to four Se2- atoms to form CdSe4 tetrahedra that share corners with three equivalent CdSe6 octahedra and corners with nine HoSe6 octahedra. The corner-sharing octahedra tilt angles range from 55–57°. There are three shorter (2.69 Å) and one longer (2.74 Å) Cd–Se bond lengths. In the fifth Cd2+ site, Cd2+ is bonded to six Se2- atoms to form CdSe6 octahedra that share corners with three equivalent HoSe4 tetrahedra, corners with three equivalent CdSe4 tetrahedra, and edges with six HoSe6 octahedra. There are three shorter (2.84 Å) and three longer (2.90 Å) Cd–Se bond lengths. In the sixth Cd2+ site, Cd2+ is bonded to four Se2- atoms to form CdSe4 tetrahedra that share corners with twelve HoSe6 octahedra. The corner-sharing octahedral tilt angles are 57°. There are one shorter (2.69 Å) and three longer (2.71 Å) Cd–Se bond lengths. In the seventh Cd2+ site, Cd2+ is bonded to six Se2- atoms to form CdSe6 octahedra that share corners with three equivalent HoSe4 tetrahedra, corners with three equivalent CdSe4 tetrahedra, and edges with six HoSe6 octahedra. There are three shorter (2.83 Å) and three longer (2.90 Å) Cd–Se bond lengths. In the eighth Cd2+ site, Cd2+ is bonded to four Se2- atoms to form CdSe4 tetrahedra that share corners with twelve HoSe6 octahedra. The corner-sharing octahedra tilt angles range from 57–58°. All Cd–Se bond lengths are 2.71 Å. In the ninth Cd2+ site, Cd2+ is bonded to four Se2- atoms to form CdSe4 tetrahedra that share corners with twelve HoSe6 octahedra. The corner-sharing octahedra tilt angles range from 57–58°. There are one shorter (2.70 Å) and three longer (2.71 Å) Cd–Se bond lengths. In the tenth Cd2+ site, Cd2+ is bonded to four Se2- atoms to form CdSe4 tetrahedra that share corners with twelve HoSe6 octahedra. The corner-sharing octahedral tilt angles are 57°. There are one shorter (2.68 Å) and three longer (2.71 Å) Cd–Se bond lengths. There are twenty inequivalent Se2- sites. In the first Se2- site, Se2- is bonded in a rectangular see-saw-like geometry to two equivalent Ho3+ and two Cd2+ atoms. In the second Se2- site, Se2- is bonded in a distorted rectangular see-saw-like geometry to three equivalent Ho3+ and one Cd2+ atom. In the third Se2- site, Se2- is bonded to three Ho3+ and one Cd2+ atom to form a mixture of distorted edge and corner-sharing SeHo3Cd trigonal pyramids. In the fourth Se2- site, Se2- is bonded in a distorted rectangular see-saw-like geometry to two equivalent Ho3+ and two Cd2+ atoms. In the fifth Se2- site, Se2- is bonded to four Ho3+ atoms to form a mixture of distorted edge and corner-sharing SeHo4 trigonal pyramids. In the sixth Se2- site, Se2- is bonded in a distorted rectangular see-saw-like geometry to three equivalent Ho3+ and one Cd2+ atom. In the seventh Se2- site, Se2- is bonded in a distorted rectangular see-saw-like geometry to two equivalent Ho3+ and two Cd2+ atoms. In the eighth Se2- site, Se2- is bonded to three Ho3+ and one Cd2+ atom to form distorted SeHo3Cd trigonal pyramids that share corners with three SeHo3Cd trigonal pyramids and edges with three SeHo4 trigonal pyramids. In the ninth Se2- site, Se2- is bonded to four Ho3+ atoms to form a mixture of distorted edge and corner-sharing SeHo4 trigonal pyramids. In the tenth Se2- site, Se2- is bonded in a distorted rectangular see-saw-like geometry to three equivalent Ho3+ and one Cd2+ atom. In the eleventh Se2- site, Se2- is bonded to three Ho3+ and one Cd2+ atom to form distorted SeHo3Cd trigonal pyramids that share corners with three SeHo3Cd trigonal pyramids and edges with three SeHo4 trigonal pyramids. In the twelfth Se2- site, Se2- is bonded in a distorted rectangular see-saw-like geometry to three Ho3+ and one Cd2+ atom. In the thirteenth Se2- site, Se2- is bonded to four Ho3+ atoms to form a mixture of distorted edge and corner-sharing SeHo4 trigonal pyramids. In the fourteenth Se2- site, Se2- is bonded in a distorted rectangular see-saw-like geometry to three equivalent Ho3+ and one Cd2+ atom. In the fifteenth Se2- site, Se2- is bonded in a distorted rectangular see-saw-like geometry to three Ho3+ and one Cd2+ atom. In the sixteenth Se2- site, Se2- is bonded in a distorted rectangular see-saw-like geometry to three Ho3+ and one Cd2+ atom. In the seventeenth Se2- site, Se2- is bonded to three equivalent Ho3+ and one Cd2+ atom to form distorted corner-sharing SeHo3Cd trigonal pyramids. In the eighteenth Se2- site, Se2- is bonded in a distorted rectangular see-saw-like geometry to three equivalent Ho3+ and one Cd2+ atom. In the nineteenth Se2- site, Se2- is bonded to three Ho3+ and one Cd2+ atom to form distorted SeHo3Cd trigonal pyramids that share corners with three SeHo4 trigonal pyramids and edges with three SeHo3Cd trigonal pyramids. In the twentieth Se2- site, Se2- is bonded to three equivalent Ho3+ and one Cd2+ atom to form distorted edge-sharing SeHo3Cd trigonal pyramids.

36 MATERIALS SCIENCE↗

Materials Data on Ca14MnAs11 by Materials Project

Ca14MnAs11 crystallizes in the orthorhombic Iba2 space group. The structure is three-dimensional. there are fifteen inequivalent Ca2+ sites. In the first Ca2+ site, Ca2+ is bonded to six As+2.82- atoms to form CaAs6 octahedra that share corners with eight CaAs6 octahedra, corners with two equivalent MnAs4 tetrahedra, faces with two CaAs6 octahedra, and a faceface with one CaAs5 trigonal bipyramid. The corner-sharing octahedra tilt angles range from 39–57°. There are a spread of Ca–As bond distances ranging from 2.93–3.24 Å. In the second Ca2+ site, Ca2+ is bonded to six As+2.82- atoms to form CaAs6 octahedra that share corners with four CaAs6 octahedra, corners with two equivalent MnAs4 tetrahedra, corners with three equivalent CaAs5 trigonal bipyramids, edges with two CaAs6 octahedra, and faces with two CaAs6 octahedra. The corner-sharing octahedra tilt angles range from 38–55°. There are a spread of Ca–As bond distances ranging from 3.02–3.10 Å. In the third Ca2+ site, Ca2+ is bonded to six As+2.82- atoms to form distorted CaAs6 octahedra that share corners with four CaAs6 octahedra, corners with two equivalent MnAs4 tetrahedra, a cornercorner with one CaAs5 trigonal bipyramid, edges with two CaAs6 octahedra, edges with two equivalent CaAs5 trigonal bipyramids, and faces with two CaAs6 octahedra. The corner-sharing octahedra tilt angles range from 38–56°. There are a spread of Ca–As bond distances ranging from 3.00–3.11 Å. In the fourth Ca2+ site, Ca2+ is bonded in a 6-coordinate geometry to six As+2.82- atoms. There are a spread of Ca–As bond distances ranging from 2.99–3.57 Å. In the fifth Ca2+ site, Ca2+ is bonded in a 6-coordinate geometry to six As+2.82- atoms. There are a spread of Ca–As bond distances ranging from 2.97–3.57 Å. In the sixth Ca2+ site, Ca2+ is bonded to six As+2.82- atoms to form CaAs6 octahedra that share corners with four CaAs6 octahedra, corners with two equivalent MnAs4 tetrahedra, edges with two CaAs6 octahedra, and faces with two CaAs6 octahedra. The corner-sharing octahedra tilt angles range from 38–55°. There are a spread of Ca–As bond distances ranging from 3.02–3.10 Å. In the seventh Ca2+ site, Ca2+ is bonded in a 6-coordinate geometry to six As+2.82- atoms. There are a spread of Ca–As bond distances ranging from 2.98–3.56 Å. In the eighth Ca2+ site, Ca2+ is bonded in a 5-coordinate geometry to five As+2.82- atoms. There are a spread of Ca–As bond distances ranging from 2.99–3.18 Å. In the ninth Ca2+ site, Ca2+ is bonded to six As+2.82- atoms to form CaAs6 octahedra that share corners with eight CaAs6 octahedra, corners with two equivalent MnAs4 tetrahedra, corners with two equivalent CaAs5 trigonal bipyramids, edges with two equivalent CaAs5 trigonal bipyramids, and faces with two equivalent CaAs6 octahedra. The corner-sharing octahedra tilt angles range from 39–56°. There are a spread of Ca–As bond distances ranging from 2.94–3.22 Å. In the tenth Ca2+ site, Ca2+ is bonded in a 6-coordinate geometry to six As+2.82- atoms. There are a spread of Ca–As bond distances ranging from 2.97–3.56 Å. In the eleventh Ca2+ site, Ca2+ is bonded to six As+2.82- atoms to form CaAs6 octahedra that share corners with eight CaAs6 octahedra, corners with two equivalent MnAs4 tetrahedra, and faces with two equivalent CaAs6 octahedra. The corner-sharing octahedra tilt angles range from 39–55°. There are a spread of Ca–As bond distances ranging from 2.94–3.20 Å. In the twelfth Ca2+ site, Ca2+ is bonded to five As+2.82- atoms to form distorted CaAs5 trigonal bipyramids that share corners with five CaAs6 octahedra, edges with four CaAs6 octahedra, an edgeedge with one MnAs4 tetrahedra, and a faceface with one CaAs6 octahedra. The corner-sharing octahedra tilt angles range from 35–69°. There are a spread of Ca–As bond distances ranging from 2.99–3.17 Å. In the thirteenth Ca2+ site, Ca2+ is bonded in a 6-coordinate geometry to six As+2.82- atoms. There are a spread of Ca–As bond distances ranging from 2.98–3.58 Å. In the fourteenth Ca2+ site, Ca2+ is bonded in a 6-coordinate geometry to six As+2.82- atoms. There are a spread of Ca–As bond distances ranging from 2.98–3.54 Å. In the fifteenth Ca2+ site, Ca2+ is bonded to six As+2.82- atoms to form distorted CaAs6 octahedra that share corners with four CaAs6 octahedra, corners with two equivalent MnAs4 tetrahedra, edges with two CaAs6 octahedra, an edgeedge with one CaAs5 trigonal bipyramid, and faces with two CaAs6 octahedra. The corner-sharing octahedra tilt angles range from 38–57°. There are a spread of Ca–As bond distances ranging from 3.00–3.10 Å. Mn3+ is bonded to four As+2.82- atoms to form MnAs4 tetrahedra that share corners with twelve CaAs6 octahedra and an edgeedge with one CaAs5 trigonal bipyramid. The corner-sharing octahedra tilt angles range from 41–49°. There are two shorter (2.52 Å) and two longer (2.53 Å) Mn–As bond lengths. There are eleven inequivalent As+2.82- sites. In the first As+2.82- site, As+2.82- is bonded in a 7-coordinate geometry to seven Ca2+ atoms. In the second As+2.82- site, As+2.82- is bonded in a 7-coordinate geometry to seven Ca2+ and one Mn3+ atom. In the third As+2.82- site, As+2.82- is bonded in a 7-coordinate geometry to eight Ca2+ atoms. In the fourth As+2.82- site, As+2.82- is bonded in a 7-coordinate geometry to seven Ca2+ and one Mn3+ atom. In the fifth As+2.82- site, As+2.82- is bonded in a 7-coordinate geometry to seven Ca2+ atoms. In the sixth As+2.82- site, As+2.82- is bonded in a 8-coordinate geometry to eight Ca2+ atoms. In the seventh As+2.82- site, As+2.82- is bonded in a 9-coordinate geometry to eight Ca2+ and one As+2.82- atom. The As–As bond length is 2.83 Å. In the eighth As+2.82- site, As+2.82- is bonded in a 7-coordinate geometry to eight Ca2+ atoms. In the ninth As+2.82- site, As+2.82- is bonded in a 7-coordinate geometry to seven Ca2+ and one Mn3+ atom. In the tenth As+2.82- site, As+2.82- is bonded in a 7-coordinate geometry to seven Ca2+ and one Mn3+ atom. In the eleventh As+2.82- site, As+2.82- is bonded in a 9-coordinate geometry to eight Ca2+ and one As+2.82- atom.

36 MATERIALS SCIENCE↗