Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Isothermal Equation Of State For Compressed Solids

Same equation with three adjustable parameters applies to different materials. Improved equation of state describes pressure on solid as function of relative volume at constant temperature. Even though types of interatomic interactions differ from one substance to another, form of equation determined primarily by overlap of electron wave functions during compression. Consequently, equation universal in sense it applies to variety of substances, including ionic, metallic, covalent, and rare-gas solids. Only three parameters needed to describe equation for given material.

Vinet, Pascal↗

Calculation of Free-Free Opacities

Free-free absorption is an important contribution to the opacity for radiation transport through hot materials Temperatures can be as high as several keV, such that it becomes a computational challenge to solve the Schrodinger equation efficiently for rapidly oscillating continuum functions for high angular momenta. Several groups\footnots, including ours, have studied the phase amplitude solution (PAS) of the Schrodinger equation, in which one solves equations for the wave function amplitude and phase, which are: smooth functions of the electron energy. It is also important to have an accurate Schroudinger benchmark for the development of the PAS method. We present results for dipole matrix elements, Gaunt factors, and cross sections for the absorption of radiation at various energies for Cs XIX at temperature=100 eV and density=0.187 g/cc for our newly developed PAS and Schrodinger benchmark.

Bhatia, A. K.↗

Reconstructing the exit wave of 2D materials in high-resolution transmission electron microscopy using machine learning

Reconstruction of the exit wave function is an important route to interpreting high-resolution transmission electron microscopy (HRTEM) images. Here we demonstrate that convolutional neural networks can be used to reconstruct the exit wave from a short focal series of HRTEM images, with a fidelity comparable to conventional exit wave reconstruction. We use a fully convolutional neural network based on the U-Net architecture, and demonstrate that we can train it on simulated exit waves and simulated HRTEM images of graphene-supported molybdenum disulphide (an industrial desulfurization catalyst). We then apply the trained network to analyse experimentally obtained images from similar samples, and obtain exit waves that clearly show the atomically resolved structure of both the MoS 2 nanoparticles and the graphene support. We also show that it is possible to successfully train the neural networks to reconstruct exit waves for 3400 different two-dimensional materials taken from the Computational 2D Materials Database of known and proposed two-dimensional materials.

2D materials↗

Out-of-time-ordered-correlators for the pure inverted quartic oscillator: classical chaos meets quantum stability

Out-of-time-ordered-correlators (OTOCs) have been suggested as a means to diagnose chaotic behavior in quantum mechanical systems. Recently, it was found that OTOCs display exponential growth for the inverted quantum harmonic oscillator, mirroring the fact that this system is classically and quantum mechanically unstable. In this work, I study OTOCs for the inverted anharmonic (pure quartic) oscillator in quantum mechanics, finding only oscillatory behavior despite the classically unstable nature of the system. For higher temperature, OTOCs seem to exhibit saturation consistent with a value of –2< x 2 > T < p 2 > T at late times. I provide analytic evidence from the spectral zeta-function and the WKB method as well as direct numerical solutions of the Schrödinger equation that the inverted quartic oscillator possesses a real and positive energy eigenspectrum, and normalizable wave-functions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Overdestabilization vs Overstabilization in the Theoretical Analysis of f-Orbital Covalency

The complex nature of the f-orbital electronic structures and their interaction with the chemical environment pose significant computational challenges. Advanced computational techniques that variationally include scalar relativities and spin–orbit coupling directly at the molecular orbital level have been developed to address this complexity. Among these, variational relativistic multiconfigurational multireference methods stand out for their high accuracy and systematic improvement in studies of f-block complexes. Additionally, these advanced methods offer the potential for calibrating low-scaling electronic structure methods such as density functional theory. However, studies on the Cl K-edge X-ray absorption spectra of the [Ce(III)Cl 6 ] 3– and [Ce(IV)Cl 6 ] 2– complexes show that time-dependent density functional theory with approximate exchange–correlation kernels can lead to inaccuracies, resulting in an overstabilization of 4f orbitals and incorrect assessments of covalency. In contrast, approaches utilizing small active space wave function methods may understate the stability of these orbitals. The results herein demonstrate the need for large active space, multireference, and variational relativistic methods in studying f-block complexes.

chemical calculations↗

Theoretical calculation of ozone vibrational infrared intensities

An ab initio dipole moment function for ozone has been computed using the CASSCF (complete active space self-consistent field) method, and forms the basis for a calculation of ozone infrared band intensities. Vibrational wave functions were generated using the variational method with potential energy surfaces derived from experimental force constants. Computed values of the permanent dipole moment, dipole moment derivatives, and infrared band strengths are all found to be in remarkably good agreement with experiment. Intensities are predicted for hot bands for which experimental values are unavailable, and implications for atmospheric ozone spectroscopy are discussed. As the dipole moment matrix element signs are now established for nearly all of the observed bands, further refinement of the dipole moment function is possible.

Adler-Golden, S. M.↗

A modified coupled pair functional approach

A modified coupled pair functional (CPF) method is presented for the configuration interaction problem that dramatically improves properties for cases where the Hartree-Fock reference configuration is not a good zeroth-order wave function description. It is shown that the tendency for CPF to overestimate the effect of higher excitations arises from the choice of the geometric mean for the partial normalization denominator. The modified method is demonstrated for ground state dipole moment calculations of the NiH, CuH, and ZnH transition metal hydrides, and compared to singles-plus-doubles configuration interaction and the Ahlrichs et al. (1984) CPF method.

Chong, D. P.↗

Inducing metallicity in graphene nanoribbons via zero-mode superlattices

The design and fabrication of robust metallic states in graphene nanoribbons (GNRs) are challenging because lateral quantum confinement and many-electron interactions induce electronic band gaps when graphene is patterned at nanometer length scales. Recent developments in bottom-up synthesis have enabled the design and characterization of atomically precise GNRs, but strategies for realizing GNR metallicity have been elusive. Here we demonstrate a general technique for inducing metallicity in GNRs by inserting a symmetric superlattice of zero-energy modes into otherwise semiconducting GNRs. We verify the resulting metallicity using scanning tunneling spectroscopy as well as first-principles density-functional theory and tight-binding calculations. Our results reveal that the metallic bandwidth in GNRs can be tuned over a wide range by controlling the overlap of zero-mode wave functions through intentional sublattice symmetry breaking.

36 MATERIALS SCIENCE↗

Theoretical Study of the Nitric Oxide epsilon and 1100 A Bands

Potential-energy curves, transition-moment functions, Einstein Alpha coefficients and radiative lifetimes associated with the Rydberg state of nitric oxide are calculated in large Gaussian basis sets employing internally contracted MRCI from state-averaged CASSCF wave functions. Computationally, a strong sensitivity of the results to the choice of the CASSCF active space is seen, and careful examination of this behavior gives insight into matters related to the treatment of weakly occupied orbitals, which is a consideration in any study Rydberg excited states. The epsilon system transition-moment function and radiative lifetimes are in disagreement with another calculation in the literature, but reasons for the discrepancies are examined, and the present results are determined to be more accurate.

Sheehy, Jeffrey A.↗

Effective collision strengths for electron impact excitations in S II

Electron impact collision strengths for forbidden, semiforbidden, and allowed transitions in S II calculated using the R-matrix method are presented. Configuration interaction wave functions are used to represent the six target states included in the calculation. At low impact energies the collision strengths are dominated by resonances for several transitions. The contribution from higher partial waves is obtained in the close-coupling approximation with exchange terms omitted. Results are presented for the effective collision strengths over a wide temperature range (5000-150,000 K) of astrophysical interest. The present results for the 4S(0) yields 2P(0) transition are 20-30 percent lower than previous calculations, while for the 4S(0) yields 2D(0) transition they are in good agreement. The results are approximately 30 percent higher than those of Ho and Henry (1983) for the 4S(0) yields 2P(0) transition at 80,000 K, and the difference between the two results increases with decreasing temperatures (under 80,000 K).

Tayal, S. S.↗

Atomic forces from Dirac-Kohn-Sham equations: Implementation in flexible (APW+lo/LAPW)+LO basis set

The atomic forces formulation based on the Dirac-Kohn-Sham equation and the flexible (APW+lo/LAPW)+LO basis set is presented here. The formulation was implemented in the code FlapwMBPT and allows a user to easily switch between different basis functions of the augmentation type (APW or LAPW) and between different kind of local orbitals. Similar to the work (Phys.Rev.B 91 (2015) 035105), the implementation takes into account small discontinuities of the wave functions, density, and potential at the muffin-tin sphere boundaries. Applications to the materials with strong relativistic effects, such as $\alpha$-Uranium, PuCoGa$_{5}$, and FePt, demonstrate robustness of the method. The comparison of the calculated forces with the ones obtained by numerical differentiation of free energy shows close agreement with deviations about 0.1% or less.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unimolecular diffusion-mediated reactions with a nonrandom time-modulated absorbing barrier

A diffusion-reaction model with time-dependent reactivity is formulated and applied to unimolecular reactions. The model is solved exactly numerically and approximately analytically for the unreacted fraction as a function of time. It is shown that the approximate analytical solution is valid even when the system is far from equilibrium, and when the reactivity probability is more complicated than a square-wave function of time. A discussion is also given of an approach to problems of this type using a stochastically fluctuating reactivity, and the first-passage time for a particular example is derived.

Bashford, D.↗

Range‐separated density functional theory using multiresolution analysis and quantum computing

Quantum computers are expected to outperform classical computers for specific problems in quantum chemistry. Such calculations remain expensive, but costs can be lowered through the partition of the molecular system. In the present study, partition was achieved with range-separated density functional theory (RS-DFT). The use of RS-DFT reduces both the basis set size and the active space size dependence of the ground state energy in comparison with the use of wave function theory (WFT) alone. The utilization of pair natural orbitals (PNOs) in place of canonical molecular orbitals (MOs) results in more compact qubit Hamiltonians. To test this strategy, a basis-set independent framework, known as multiresolution analysis (MRA), was employed to generate PNOs. Tests were conducted with the variational quantum eigensolver for a number of molecules. The results show that the proposed approach reduces the number of qubits needed to reach a target energy accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Universal suppression of superfluid weight by non-magnetic disorder in $s$-wave superconductors independent of quantum geometry and band dispersion

Motivated by the experimental progress in controlling the properties of the energy bands in superconductors, significant theoretical efforts have been devoted to study the effect of the quantum geometry and the flatness of the dispersion on the superfluid weight. In conventional superconductors, where the energy bands are wide and the Fermi energy is large, the contribution due to the quantum geometry is negligible, but in the opposite limit of flat-band superconductors the superfluid weight originates purely from the quantum geometry of Bloch wave functions. Here, we study how the energy band dispersion and the quantum geometry affect the disorder-induced suppression of the superfluid weight. In particular, we consider non-magnetic disorder and s-wave superconductivity. Surprisingly, we find that the disorder-dependence of the superfluid weight is universal across a variety of models, and independent of the quantum geometry and the flatness of the dispersion. Our results suggest that a flat-band superconductor is as resilient to disorder as a conventional superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the Reaction of FNO2 with CH3, t-butyl, and C13H21

Theoretical studies are reported for the reaction of FN02 with the radicals CH3, t-butyl, and C13H21, which are templates for the radical site of a hydrogenated diamond surface. All structures axe fully optimized using density functional theory (DFT) based on the B3LYP functional. Calibration calculations axe performed for CH3 + FNO2 using the coupled cluster approach, the the internally contracted multireference configuration. interaction method, and second order perturbation theory based upon complete active space SCF (CASSCF) reference wave function. These calibration calculations support the B3LYP approach for the calculation of bond energies, but show the B3LYP barrier is too low. Combining the calibration calculations with the larger clusters yields our best estimate of a barrier of about 10 kcal/mol. for the reaction of FNO2 with a radical site on hydrogenated diamond.

Thuemmel, H. T.↗

Free-Free Transitions in the Presence of Laser Fields at Very Low Incident Electron Energy

We study the free-free transition in electron-hydrogenic systems in ground state in presence of an external laser field at very loud incident energies. The laser field is treated classically while the collision dynamics is treated quantum mechanically. The laser field is chosen to be monochromatic, linearly polarized and homogeneous. The incident electron is considered to be dressed by the laser in a nonperturbative manner by choosing a Volkov wave function for it. The scattering weave function for the electron is solved numerically by taking into account the effect of the electron exchange, short-range as well as of the long-range interactions to get the S and P wave phase shifts while for the higher angular momentum phase shifts the exchange approximation has only been considered. We calculate the laser assisted differential cross sections (LADCS) for the aforesaid free-free transition process for single photon absorption/emission. The laser intensity is chosen to be much less than the atomic field intensity. A strong suppression is noted in the LADCS as compared to the field free (FF) cross sections. Unlike the FF ones, the LADCS exhibit some oscillations having a distinct maximum at a low value of the scattering angle depending on the laser parameters as well as on the incident energies.

Bhatia, A. K.↗

Excited electronic states of O2/-/.

Configuration interaction (CI) variational trial functions (which assure formally correct dissociation) and the single-configuration self-consistent-field approximation are applied to the calculation of the excited electronic states of the negatively charged oxygen molecule. The energy curves and wave functions of these states are analyzed. All the excited states are found to have equilibrium-internuclear separations at least 1 a.u. larger than the ground state. The two lowest energy states are characterized, respectively, as shape and valence Feshbach resonances.

Krauss, M.↗

Quantum three-wave instability

For the three-wave interaction, the lowest-order nonlinear interaction in plasma dynamics, we describe how the quantum system, which is time-independent, nonchaotic, finite-dimensional, and Hermitian, can give rise to a linear instability corresponding to that in the classical system. Furthermore, we show that the instability is realized in the quantum regime as a cascade of the wave function in the space of occupation number states, and the unstable quantum system has a richer spectrum and a much longer recurrence time than the stable quantum system. The conditions for instability of the quantum three-wave interaction are described.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗