Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vector control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Experimental, Theoretical, and Computational Investigation of Separated Nozzle Flows

A detailed experimental, theoretical, and computational study of separated nozzle flows has been conducted. Experimental testing was performed at the NASA Langley 16-Foot Transonic Tunnel Complex. As part of a comprehensive static performance investigation, force, moment, and pressure measurements were made and schlieren flow visualization was obtained for a sub-scale, non-axisymmetric, two-dimensional, convergent- divergent nozzle. In addition, two-dimensional numerical simulations were run using the computational fluid dynamics code PAB3D with two-equation turbulence closure and algebraic Reynolds stress modeling. For reference, experimental and computational results were compared with theoretical predictions based on one-dimensional gas dynamics and an approximate integral momentum boundary layer method. Experimental results from this study indicate that off-design overexpanded nozzle flow was dominated by shock induced boundary layer separation, which was divided into two distinct flow regimes; three- dimensional separation with partial reattachment, and fully detached two-dimensional separation. The test nozzle was observed to go through a marked transition in passing from one regime to the other. In all cases, separation provided a significant increase in static thrust efficiency compared to the ideal prediction. Results indicate that with controlled separation, the entire overexpanded range of nozzle performance would be within 10% of the peak thrust efficiency. By offering savings in weight and complexity over a conventional mechanical exhaust system, this may allow a fixed geometry nozzle to cover an entire flight envelope. The computational simulation was in excellent agreement with experimental data over most of the test range, and did a good job of modeling internal flow and thrust performance. An exception occurred at low nozzle pressure ratios, where the two-dimensional computational model was inconsistent with the three-dimensional separation observed in the experiment. In general, the computation captured the physics of the shock boundary layer interaction and shock induced boundary layer separation in the nozzle, though there were some differences in shock structure compared to experiment. Though minor, these differences could be important for studies involving flow control or thrust vectoring of separated nozzles. Combined with other observations, this indicates that more detailed, three-dimensional computational modeling needs to be conducted to more realistically simulate shock-separated nozzle flows.

Hunter, Craig A.↗
NASA NTRS1996

Design Enhancement and Improved Post-Actuation Test Method for a 1/4 inch Normally Closed Pyro Valve

The NASA/JPL Cassini mission to Saturn will launch in October, 1997 and arrive at Saturn in the year 2004 with a 4 year mission to orbit the planet. The main propulsion thrust vector and attitude control for the spacecraft is supplied by the Cassini Propulsion Module Subsystem (C-PMS). This system will use numerous ordnance-actuated, normally-closed (NC) pyro valves to perform mission critical tasks over the 11 year mean mission duration (NMD). The proper operation of this NC valve requires it to isolate fluid flow until commanded open. Once open, the valve must allow an unobstructed flow path and seal internally to prevent leakage external to the valve. This paper documents a design evolution to a qualified, Viking heritage design with improvements in design details that control external leakage to levels that support the planetary mission of this spacecraft. In addition, it addresses an improved post-actuation leak test technique, used to better detect gas leakage past the valve's primary metal-to-metal internal seal.

Cassini↗
NASA NTRS2021

Evolution of National Airspace System Protection for Space Shuttle Launch and Landing

The breakup of the Space Shuttle Columbia on 1 February 2003 during the entry phase of the STS-107mission occurred above a significant number of aircraft operating in the National Airspace System (NAS).Although no aircraft were struck by falling debris, the incident led the Federal Aviation Administration(FAA) and the National Aeronautics and Space Administration (NASA) to seek cooperative ways to betterprotect aircraft operating in the NAS during Space Shuttle launch and landing operations. Applicationswere developed and improved by both the FAA and NASA to provide pre-operation and near real-timegroundtracks and debris footprints to enable Air Traffic Controllers (ATC) to vector aircraft away from thedebris field in the event of a Space Shuttle breakup. Real-time coordination processes were also developedto provide the FAA data and insight into ongoing Space Shuttle operations in order to protect the NAS.The processes and procedures developed for Space Shuttle operations are extensible and applicable tofuture NASA and commercial spacecraft.

Doyle W Hensley↗
NASA NTRS1984

Elimination of uncontrollable rigid body mode, appendix C

The planar system model is examined which reveals two rigid body modes. One is due to the pure translation of the whole experiment assembly and is uncontrollable because the only control input is a torque at the gimbal. The other rigid body mode is due to the pointing of the gimbal and is the one for which control is sort. The problem arises from the Vector V2 which relates the control input to the modal coordinates. Since its fifth and sixth elements are both nonzero, neither body mode can be thrown away as is. The two rigid body modes must be transformed so that one is unaffected by the control input and one is left controllable. The uncontrollable mode can then be eliminated from the model for design purposes. A process is described to accomplish the elimination of the uncontrollable rigid body mode.

Source record↗
NASA NTRS1992

Flight-determined benefits of integrated flight-propulsion control systems

Over the last two decades, NASA has conducted several experiments in integrated flight-propulsion control. Benefits have included improved maneuverability; increased thrust, range, and survivability; reduced fuel consumption; and reduced maintenance. This paper presents the basic concepts for control integration, examples of implementation, and benefits. The F-111E experiment integrated the engine and inlet control systems. The YF-12C incorporated an integral control system involving the inlet, autopilot, autothrottle, airdata, navigation, and stability augmentation systems. The F-15 research involved integration of the engine, flight, and inlet control systems. Further extension of the integration included real-time, onboard optimization of engine, inlet, and flight control variables; a self-repairing flight control system; and an engines-only control concept for emergency control. The F-18A aircraft incorporated thrust vectoring integrated with the flight control system to provide enhanced maneuvering at high angles of attack. The flight research programs and the resulting benefits of each program are described.

James F Stewart↗
NASA NTRS2010

Lunar Reconnaissance Orbiter (LRO) Thruster Control Mode Design and Flight Experience

National Aeronautics and Space Administration s (NASA) Goddard Space Flight Center (GSFC) in Greenbelt, MD, designed, built, tested, and launched the Lunar Reconnaissance Orbiter (LRO) from Cape Canaveral Air Force Station on June 18, 2009. The LRO spacecraft is the first operational spacecraft designed to support NASA s return to the Moon, as part of the Vision for Space Exploration. LRO was launched aboard an Atlas V 401 launch vehicle into a direct insertion trajectory to the Moon. Twenty-four hours after separation the propulsion system was used to perform a mid-course correction maneuver. Four days after the mid-course correction a series of propulsion maneuvers were executed to insert LRO into its commissioning orbit. The commission period lasted eighty days and this followed by a second set of thruster maneuvers that inserted LRO into its mission orbit. To date, the spacecraft has been gathering invaluable data in support of human s future return to the moon. The LRO Attitude Control Systems (ACS) contains two thruster based control modes: Delta-H and Delta-V. The design of the two controllers are similar in that they are both used for 3-axis control of the spacecraft with the Delta-H controller used for momentum management and the Delta-V controller used for orbit adjust and maintenance maneuvers. In addition to the nominal purpose of the thruster modes, the Delta-H controller also has the added capability of performing a large angle slew maneuver. A suite of ACS components are used by the thruster based control modes, for both initialization and control. For initialization purposes, a star tracker or the Kalman Filter solution is used for providing attitude knowledge and upon entrance into the thruster based control modes attitude knowledge is provided via rate propagation using a inertial reference unit (IRU). Rate information for the controller is also supplied by the IRU. Three-axis control of the spacecraft in the thruster modes is provided by eight 5-lbf class attitude control thrusters configured in two sets of four thrusters for redundancy purposes. Four additional 20-lbf class thrusters configured in two sets of two thrusters are used for Lunar Orbit Insertion maneuvers. The propulsion system is one the few systems on-board the LRO spacecraft that has built in redundancy. The Delta-H controller consists of a Proportional-Derivative (PD) controller with a structural filter on the thrusters and a Proportional controller on the reaction wheels. The PD control that employs the thrusters is used for attitude and rate control. The Proportional controller on the reaction wheels is used for commanding the wheels to a new momentum state. The ground commands used for the Delta-H controller are the system momentum vector, reaction wheel momentum, maximum expected command time, and which set of attitude control thrusters to use. The ability to command both the system momentum vector and reaction wheel momentum in the Delta-H controller provides both a capability and an additional source of operator error. Large angle slews via the Delta-H controller is achievable via this commands because these commands are used for the exit mode criteria. Setting these commands to non-consistent values prevents the mode from exiting nominally.

Hsu, Oscar C.↗
NASA NTRS1993

The influence of ATC message length and timing on pilot communication

Pilot-controller communication is critical to safe and efficient flight. It is often a challenging component of piloting, which is reflected in the number of incidents and accidents involving miscommunication. Our previous field study identified communication problems that disrupt routine communication between pilots and controllers. The present part-task simulation study followed up the field results with a more controlled investigation of communication problems. Pilots flew a simulation in which they were frequently vectored by Air Traffic Control (ATC), requiring intensive communication with the controller. While flying, pilots also performed a secondary visual monitoring task. We examined the influence of message length (one message with four commands vs. two messages with two commands each) and noncommunication workload on communication accuracy and length. Longer ATC messages appeared to overload pilot working memory, resulting in more incorrect or partial readbacks, as well as more requests to repeat the message. The timing between the two short messages also influenced communication. The second message interfered with memory for or response to the first short message when it was delivered too soon after the first message. Performing the secondary monitoring task did not influence communication. Instead, communication reduced monitoring accuracy.

Morrow, Daniel↗
NASA NTRS2005

Evolutionary Computing for Low-thrust Navigation

The development of new mission concepts requires efficient methodologies to analyze, design and simulate the concepts before implementation. New mission concepts are increasingly considering the use of ion thrusters for fuel-efficient navigation in deep space. This paper presents parallel, evolutionary computing methods to design trajectories of spacecraft propelled by ion thrusters and to assess the trade-off between delivered payload mass and required flight time. The developed methods utilize a distributed computing environment in order to speed up computation, and use evolutionary algorithms to find globally Pareto-optimal solutions. The methods are coupled with two main traditional trajectory design approaches, which are called direct and indirect. In the direct approach, thrust control is discretized in either arc time or arc length, and the resulting discrete thrust vectors are optimized. In the indirect approach, a thrust control problem is transformed into a costate control problem, and the initial values of the costate vector are optimized. The developed methods are applied to two problems: 1) an orbit transfer around the Earth and 2) a transfer between two distance retrograde orbits around Europa, the closest to Jupiter of the icy Galilean moons. The optimal solutions found with the present methods are comparable to other state-of-the-art trajectory optimizers and to analytical approximations for optimal transfers, while the required computational time is several orders of magnitude shorter than other optimizers thanks to an intelligent design of control vector discretization, advanced algorithmic parameterization, and parallel computing.

optimization↗
NASA NTRS2004

Variable Speed CMG Control of a Dual-Spin Stabilized Unconventional VTOL Air Vehicle

This paper describes an approach based on using both bias momentum and multiple control moment gyros for controlling the attitude of statically unstable thrust-levitated vehicles in hover or slow translation. The stabilization approach described in this paper uses these internal angular momentum transfer devices for stability, augmented by thrust vectoring for trim and other outer loop control functions, including CMG stabilization/ desaturation under persistent external disturbances. Simulation results show the feasibility of (1) improved vehicle performance beyond bias momentum assisted vector thrusting control, and (2) using control moment gyros to significantly reduce the external torque required from the vector thrusting machinery.

Lim, Kyong B.↗
NASA NTRS1989

Integrated flight/propulsion control study for STOVL applications

The STOVL Integrated Flight Propulsion Controls (IFPC) Program, initiated by NASA Lewis and NASA Ames to develop the necessary technologies for integrating the flight and propulsion controls of a future STOVL aircraft, is described. A major element of the STOVL IFPC Program is the STOVL Controls Integration Program (SCIP), which focuses on the development of an integrated flight propulsion control for the advanced vectored thrust STOVL concept. The SCIP has progressed to the point of generating top level control requirements.

Mihaloew, James R.↗
NASA NTRS1986

Unified control/structure design and modeling research

To demonstrate the applicability of the control theory for distributed systems to large flexible space structures, research was focused on a model of a space antenna which consists of a rigid hub, flexible ribs, and a mesh reflecting surface. The space antenna model used is discussed along with the finite element approximation of the distributed model. The basic control problem is to design an optimal or near-optimal compensator to suppress the linear vibrations and rigid-body displacements of the structure. The application of an infinite dimensional Linear Quadratic Gaussian (LQG) control theory to flexible structure is discussed. Two basic approaches for robustness enhancement were investigated: loop transfer recovery and sensitivity optimization. A third approach synthesized from elements of these two basic approaches is currently under development. The control driven finite element approximation of flexible structures is discussed. Three sets of finite element basic vectors for computing functional control gains are compared. The possibility of constructing a finite element scheme to approximate the infinite dimensional Hamiltonian system directly, instead of indirectly is discussed.

Mingori, D. L.↗
NASA NTRS1975

An optimal control of a flexible spinning satellite

A modification of optimal spinning satellite control theory is proposed, based on introducing an additional vector into the equation for control torque components. This modification essentially means that the amplitudes of the time-dependent satellite perturbation functions can be made small when the amplitudes of the control torque components are allowed to be different. An algorithm for computer simulation of the satellite control theory is provided. A singular perturbation scheme is used which greatly reduces the number of degrees of freedom in the flexible satellite motion equations.

Das, A.↗
NASA NTRS1984

Numerical analysis of a variable camber rotor blade as a lift control device

A new rotor configuration called the variable camber rotor was numerically investigated as a lift control device. This rotor differs from a conventional (baseline) rotor only in the blade aft section. In this configuration, the aft section or flap is attached to the forward section by pin joint arrangement, and also connected to the rotor control system for the control of rotor thrust level and vectoring. Pilot action to the flap deflection controls rotor lift and tip path plane tilt. The drag due to flaps is presented and the theoretical result correlated with test data. The assessment of payoff for the variable camber rotor in comparison with conventional (baseline) rotor was examined in hover. The variable camber rotor is shown to increase hover power required by 1.35%, but such a minimal power penalty is not significant enough to be considered a negative result. In forward flight, the control needs of the variable camber rotor were evaluated.

Awani, A. O.↗
NASA NTRSDate not supplied

Multi-Impulse to Time Optimal Finite Burn Trajectory Conversion

A novel algorithm is presented that provides an improvement over a traditional parameter optimization method when solving time-optimal, finite-burn pseudo-rendezvous spacecraft trajectory problems. A hybrid optimization procedure is described that converts a set of multiple-impulses, representing high- or low-thrust maneuvers, to an exact time-optimal finite-burn trajectory for a thrust limited, constant exhaust velocity spacecraft. The Hybrid Method applies a control law derived from the Euler-Lagrange system of equations within the classical Indirect Method to a modern Direct Method. An iterative adjoint-control transformation and an evolving constraint vector are introduced to solve the optimal control two-point boundary value problem. This method requires no prior knowledge of the solution, which adds simplicity to the trajectory design process and aids automation. Examples are shown for low-thrust apogee raise maneuvers, non-coplanar Earth orbit transfers, and a modified Deep Space 1 low-thrust trajectory. A numerically significant improvement to objective cost is shown across all application problems compared to a traditional solution method, as well as a significant improvement to convergence speed for a select class of problems.

Joshua A Fogel↗
NASA NTRS1969

Optimal feedback control for nonlinear control moment gyro systems

A study was made, leading to development and analysis of a technique allowing the control moment gyro (CMG) momentum vectors to avoid adverse orientations and thus to provide optimal control for the Apollo Telescope Mount. The technique was formulated in terms of a feedback scheme using a check factor, K, formed as the product of the dot products of the three CMG momentum unit vectors. The parameter K approaches unity for all adverse orientations and was used to initiate a single correction maneuver to rotate the CMG momenta away from a pending adverse orientation and to reduce K to an acceptable value. A digital computer program for ATM simulations was modified to incorporate this correction maneuver and performance was evaluated in simulated cases. Antiparallelism was used as the primary example for the evaluation of the feedback optimization technique.

Kyle, R. G.↗
NASA NTRS1996

Parameter Identification Flight Test Maneuvers for Closed Loop Modeling of the F-18 High Alpha Research Vehicle (HARV)

Flight test maneuvers are specified for the F-18 High Alpha Research Vehicle (HARV). The maneuvers were designed for closed loop parameter identification purposes, specifically for longitudinal and lateral linear model parameter estimation at 5,20,30,45, and 60 degrees angle of attack, using the Actuated Nose Strakes for Enhanced Rolling (ANSER) control law in Thrust Vectoring (TV) mode. Each maneuver is to be realized by applying square wave inputs to specific pilot station controls using the On-Board Excitation System (OBES). Maneuver descriptions and complete specifications of the time / amplitude points defining each input are included, along with plots of the input time histories.

Batterson, James G.↗
NASA NTRS1997

Linearized Poststall Aerodynamic and Control Law Models of the X-31A Aircraft and Comparison with Flight Data

The X-31A aircraft has a unique configuration that uses thrust-vector vanes and aerodynamic control effectors to provide an operating envelope to a maximum 70 deg angle of attack, an inherently nonlinear portion of the flight envelope. This report presents linearized versions of the X-31A longitudinal and lateral-directional control systems, with aerodynamic models sufficient to evaluate characteristics in the poststall envelope at 30 deg, 45 deg, and 60 deg angle of attack. The models are presented with detail sufficient to allow the reader to reproduce the linear results or perform independent control studies. Comparisons between the responses of the linear models and flight data are presented in the time and frequency domains to demonstrate the strengths and weaknesses of the ability to predict high-angle-of-attack flight dynamics using linear models. The X-31A six-degree-of-freedom simulation contains a program that calculates linear perturbation models throughout the X-31A flight envelope. The models include aerodynamics and flight control system dynamics that are used for stability, controllability, and handling qualities analysis. The models presented in this report demonstrate the ability to provide reasonable linear representations in the poststall flight regime.

Stoliker, Patrick C.↗
NASA NTRS1976

On the optimal minimum order observer-based compensator and the limited state variable feedback controller

Four design problems are considered: two on the optimal minimum order observer-based compensator design and two on the optimal limited state variable feedback controller. The problem of designing an optimal discrete time linear time-invariant observer-based compensator for the regulation of an n dimensional linear discrete time time-invariant plant with m independent outputs is considered. This is a stochastic design problem to the extent that the initial plant state is assumed to be a random vector with known first and second order statistics. The compensator parameters are obtained by minimizing the expectation, with respect to the initial conditions, of the standard cost, quadratic in the state and control vectors with the inclusion of cross terms.

Llorens-Ortiz, B.↗