Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Friction and wear of titanium alloys and copper alloys sliding against titanium 6-percent-aluminum - 4-percent-vanadium alloy in air at 430 C

Experiments were conducted to determine the friction and wear characteristics of aluminum bronzes and copper-tin, titanium-tin, and copper-silver alloys sliding against a titanium-6% aluminum-4% vanadium alloy (Ti-6Al-4V). Hemispherically tipped riders of aluminum bronze and the titanium and copper alloys were run against Ti-6Al-4V disks in air at 430 C. The sliding velocity was 13 cm/sec, and the load was 250 g. Results revealed that high tin content titanium and copper alloys underwent significantly less wear and galling than commonly used aluminum bronzes. Also friction force was less erratic than with the aluminum bronzes.

Wisander, D. W.↗

Organometalic carbosilane polymers containing vanadium and their preparation

The present invention concerns a new organometallic polymer material containing in part a vanadium-siloxane linkage (V-0-Si), which has excellent resistance to heat and oxidation and a high residue ratio after high temperature treatment in a non-oxidizing atmosphere, for example, nitrogen, argon, helium, ammonia, or hydrogen.

Yajima, S.↗

Low temperature electrolytes for lithium/silver vanadium oxide cells

Combinations of methyl formate (MF) and propylene carbonate (PC) using salt concentrations of 0.6 to 2.4 M, with lithium hexafluoroarsenate and lithium tetrafluoroborate in a five to one molar ratio, were investigated as electrolytes in lithium/silver vanadium oxide batteries. The composition of the electrolyte affected cell performance at low temperature, self-discharge and abuse resistance as characterized by short circuit and crush testing. The electrolyte that provided the best combination of good low temperature performance, low cell self-discharge and abuse resistance was 0.6 M salt in 10:90 PC/MF.

Tuhovak, Denise R.↗

Low temperature performance of lithium/silver vanadium oxide cells

Lithium/silver vanadium oxide cells for low temperature applications have been developed. Prismatic and spirally wound AA cells were tested under constant load discharge of 0.3 to 1.8 amps or pulse discharge of 0.225 or 1.0 amps at temperatures from -40 to 25 C. At -40 C with current densities of 2.5 mA/cm2, 23 percent of theoretical capacity was achieved under constant load discharge and 40 percent of theoretical capacity was achieved under pulse test. Self-discharge estimates of 0.7 percent per year at 25 C were obtained from microcalorimetry. Preliminary safety testing of the cells revealed no violent performance under short circuit or crush tests.

Takeuchi, E. S.↗

Systematics of Vanadium in Olivine from Planetary Basalts

The systematics of vanadium in olivines from the Earth, Moon and Mars allows for the comparison of planetary basalt origin and igneous setting and process. Additional information is contained in the original extended abstract.

Karner, J. M.↗

Oxygen Fugacity of Mare Basalts and the Lunar Mantle Application of a New Microscale Oxybarometer Based on the Valence State of Vanadium

The ability to estimate oxygen fugacities for mare basalts and to extend these observations to the lunar mantle is limited using bulk analysis techniques based on buffering assemblages or the valence state of iron. These limitations are due to reequilibration of mineral assemblages at subsolidus conditions, deviations of mineral compositions from thermodynamic ideality, size requirements, and the limits of the iron valence at very low fO2. Still, these approaches have been helpful and indicate that mare basalts crystallized at fO2 between the iron-w stite buffer (IW) and the ilmenite breakdown reaction (ilmenite = rutile + iron). It has also been inferred from these estimates that the lunar mantle is also highly reduced lying at conditions below IW. Generally, these data cannot be used to determine if the mare basalts become increasingly reduced during transport from their mantle source and eruption at the lunar surface and if there are differences in fO2 among mare basalts or mantle sources. One promising approach to determining the fO2 of mare basalts is using the mean valence of vanadium (2+, 3+, 4+, 5+) determined on spots of a few micrometers in diameter using synchrotron x-ray absorption fine structure (XAFS) spectroscopy. The average valence state of V in basaltic glasses is a function of fO2, temperature, V coordination, and melt composition. Here, we report the initial results of this approach applied to lunar pyroclastic glasses.

Shearer, C. K.↗

Micro-XANES Measurements on Experimental Spinels and the Oxidation State of Vanadium in Spinel-Melt Pairs

Spinel can be a significant host phase for V as well as other transition metals such as Ni and Co. However, vanadium has multiple oxidation states V(2+), V(3+), V(4+) or V(5+) at oxygen fugacities relevant to natural systems. We do know that D(V) spinel/melt is correlated with V and TiO2 content and fO2, but the uncertainty of the oxidation state under the range of natural conditions has made elusive a thorough understanding of D(V) spinel/melt. For example, V(3+) is likely to be stable in spinels, based on exchange with Al in experiments in the CaO-MgO-Al2O3-SiO2 system. On the other hand, it has been argued that V(4+) will be stable across the range of natural oxygen fugacities in nature. In order to gain a better understanding of D(V) spinel/melt we have equilibrated spinel-melt pairs at controlled oxygen fugacities, between HM to NNO, where V is present in the spinel at natural levels (approx. 300 ppm V). These spinel-melt pairs were analyzed using micro-XANES at the Advanced Photon Source at Argonne National Laboratory. The new results will be used together with spinel compositional data (Ti, V content) and oxygen fugacity, to unravel the effects of these variables on D(V) spinel/melt.

Righter, K.↗

Vanadium flow battery electrolyte synthesis via chemical reduction of V 2 O 5 in aqueous HCl and H 2 SO 4

Here, we report a simple method to synthesize V 4+ (VO 2+ ) electrolytes as feedstock for all vanadium redox flow batteries (RFB). By dissolving V 2 O 5 in aqueous HCl and subsequently adding glycerol as a reducing agent, we have demonstrated an inexpensive route for electrolyte synthesis to concentrations >2.5 M V 4+ (VO 2+ ). Electrochemical analysis and testing of laboratory scale RFB demonstrate improved thermal stability across a wider temperature range (-10-65°C) for V 4+ (VO 2+ ) electrolytes in HCl compared to in H 2 SO 4 electrolytes.

25 ENERGY STORAGE↗

Refractory Alloys: Vanadium, Niobium, Molybdenum, Tungsten

Refractory metals as a class of materials are understood to share the common properties of very high melting temperature and mechanical properties and wear resistance. A narrowly defined class of refractory metals would include metals with melting points > 2000°C: niobium, chromium, molybdenum, tantalum, tungsten, and rhenium [1], while a wider class would also include those with melting points above 1850°C: vanadium, hafnium, titanium, zirconium, ruthenium, osmium, rhodium, and iridium. The current practical application of refractory metals is relatively widespread (though arguably for specialty application) with examples being casting molds, wire filaments, reactant vessels for corrosive materials, hard tooling, and a myriad of applications where high density is desired. Because refractory metals are a class of materials possessing extraordinary high-temperature properties, they are perennial contenders for high-temperature nuclear applications. However, their use to date has been limited, due in part to the difficulty in fabricating high-performance refractory parts and their environmental degradation including irradiation effects. The following sections will discuss the current processing routes being taken to produce nuclear-grade refractory alloys, a general discussion of their properties, and the effects of irradiation on the materials.

Snead, Lance Lewis↗

Synthesis, structure and magnetic properties of V{sub 4}O{sub 9}-A missing link in binary vanadium oxides

V{sub 4}O{sub 9}: A missing link of Wadsley phases has been successfully synthesized by using sulfur as a reducing agent at a low temperature and its structure has been determined by combining electron, X-ray and neutron diffractions. V{sub 4}O{sub 9} has an orthorhombic Cmcm structure and the lattice parameters are a=10.356(2) A, b=8.174(1) A and c=16.559(3) A at room temperature. The structure is composed of shared edges and corners of three types of polyhedra; a VO{sub 6} distorted octahedron, a VO{sub 5} pyramid and a VO{sub 4} tetrahedron. The structure of V{sub 4}O{sub 9} is very similar to that of vanadyl pyrophosphate (VO){sub 2}P{sub 2}O{sub 7} which has PO{sub 4} tetrahedra instead of VO{sub 4} tetrahedra. This indicates that V{sub 4}O{sub 9} is a salt of pyro-ion [V{sub 2}O{sub 7}]{sup 4-}; (VO){sub 2}V{sub 2}O{sub 7}. The magnetic properties of V{sub 4}O{sub 9} have been investigated by magnetic susceptibility, high-field magnetization and inelastic neutron scattering measurements. V{sub 4}O{sub 9} is a quantum spin system with a spin-gapped ground state. The excitation gap between the singlet ground state and the excited triplet state is approximately 73 K. The magnetic susceptibility behavior suggests that V{sub 4}O{sub 9} is a spin-1/2 dimer system with significant interdimer interactions, as opposed to (VO){sub 2}P{sub 2}O{sub 7}, which is an alternating spin-1/2 chain system. This difference is thought to be due to the fact that VO{sub 4}-mediated interactions are considerably weaker than PO{sub 4}-mediated interactions. - Graphical abstract: Temperature dependence of magnetic susceptibility ({chi}{sub raw}) measured at 0.1 T for V{sub 4}O{sub 9}. The intrinsic d-spin susceptibility ({chi}{sub spin}) of V{sub 4}O{sub 9} after subtracting the Curie tail and the temperature-independent term is shown by the solid line. V{sub 4}O{sub 9} is a spin-1/2 1D antiferromagnetic quantum spin system with a spin-gapped ground state. The structure of V{sub 4}O{sub 9} is constructed from distorted VO{sub 6} octahedra and VO{sub 4} tetrahedra, similar to the structure of (VO){sub 2}P{sub 2}O{sub 7} with PO{sub 4} tetrahedra instead of VO{sub 4} tetrahedra.

36 MATERIALS SCIENCE↗

Vanadium dioxide nanobelts: Hydrothermal synthesis and magnetic properties

VO{sub 2} (B) nanobelts were prepared by a hydrothermal method at 180 {sup o}C using V{sub 2}O{sub 5}.nH{sub 2}O sol and H{sub 2}C{sub 2}O{sub 4}.2H{sub 2}O as starting agents. The obtained nanobelts have diameters ranging from 50 to 100 nm in width, 20-30 nm in thickness with lengths up to 1.5 {mu}m. Measurements of the static magnetic susceptibility provide evidence for two phase transitions at T{sub 1} = 225 K and T{sub 2} = 290 K, respectively. Below T{sub 1}, the data suggest the presence quasi-free as well as of strongly antiferromagnetic correlated spins associated to V{sup 4+}-ions.

36 MATERIALS SCIENCE↗

Synthesis and Electrical Properties of a Fluorite-Like Nd{sub 5}Mo{sub 3}O{sub 16} Compound with Partial Substitution of Molybdenum by Tungsten, Niobium, or Vanadium

The phase formation of Nd{sub 5}Mo{sub 3–x}W{sub x}O{sub 16.5}, Nd{sub 5}Mo{sub 3–x}Nb{sub x}O{sub 16.5–х/2}, and Nd{sub 5}Mo{sub 3–x}V{sub x}O{sub 16.5–х/2} solid solutions based on a fluorite-like Nd{sub 5}Mo{sub 3}O{sub 16.5} compound (mixed conductor with interstitial oxygen conductivity) has been studied. The electrical conductivity of doped compounds obeys the Arrhenius law and, at a low impurity content, is as high as 0.03–0.08 S/cm at 800°C. Substitution of Mo{sup 6+} cations by V{sup 5+} and Nb{sup 5+} cations reduces the interstitial oxygen content, which causes a decrease in the solid-solution electrical conductivity by 1–2 orders of magnitude and a decrease in the cubic unit-cell parameter. A wide diffuse anomaly with a maximum of about 1500–4000 has been observed in the temperature dependence of the permittivity for all single-crystal and polycrystalline samples in the range of 300–900°C.

36 MATERIALS SCIENCE↗

Metal–Insulator Phase Transition in Tungsten-Doped Vanadium Dioxide Thin Films

The electrical conductivity of thin polycrystalline V{sub (1 –} {sub x)}W{sub x}O{sub 2} has been studied in a wide temperature range, which covers the regions of both the metallic and insulator phases. An increase in the tungsten concentration is shown to shift the metal–insulator phase transition toward lower temperatures, while the temperature range of the coexistence of the phases monotonically increases as the impurity concentration increases. The temperature dependence of the conductivity of the insulator phase of V{sub (1 –} {sub x)}W{sub x}O{sub 2} is explained using the hopping conduction model that takes into account the influence of thermal vibrations of atoms on the resonance integral. Parameter ε in the dependence on the level of doping VO{sub 2} has been calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flexible Vanadium Dioxide Photodetectors for Visible to Longwave Infrared Detection at Room Temperature

Abstract Flexible optoelectronics is a rapidly growing field, with a wide range of potential applications. From wearable sensors to bendable solar cells, curved displays, and curved focal plane arrays, the possibilities are endless. The criticality of flexible photodetectors for many of these applications is acknowledged, however, devices that are demonstrated thus far are limited in their spectral range. In this study, flexible photodetectors are demonstrated using a VO x nanoparticle ink, with an extremely broad operating wavelength range of 0.4 to 20 µm. This ink is synthesized using a simple and scalable wet‐chemical process. These photodetectors operate at room temperature and exhibit minimal variance in performance even when bent at angles of up to 100 ° at a bend radius of 6.4 mm. In addition, rigorous strain testing of 100 bend and release cycles revealed a photoresponse with a standard deviation of only 0.55%. This combination of mechanical flexibility, wide spectral response, and ease of fabrication makes these devices highly desirable for a wide range of applications, including low‐cost wearable sensors and hyperspectral imaging systems.

36 MATERIALS SCIENCE↗

Surface Amorphization of Vanadium Dioxide (B) for K-ion Battery

Given the merits of low cost, fast ionic transport in electrolyte, and high operating voltage, potassium ion batteries (PIBs) are promising alternatives to lithium-ion batteries. However, developing suitable electrode materials that can reversibly accommodate large potassium ions is a great challenge. In this paper, guided by density functional theory (DFT) calculations, it is demonstrated that the strategy of interfacial engineering via surface amorphization of VO 2 (B) nanorods (SA-VO 2 ), which results in the formation of a crystalline core/amorphous shell heterostructure, enables superior K + storage performance in terms of large capacity, outstanding rate capability, and long cycle stability working as an anode for PIBs. DFT calculations reveal that the created crystalline/amorphous heterointerface in SA-VO 2 can substantially lower the surface energy, narrow the band gap, and reduce the K + diffusion barrier of VO 2 (B). These conditions enable enhanced K + storage capacity and rapid K + /electron transfer, which result in large capacity and outstanding rate capability. Using in situ X-ray diffraction and in situ transmission electron microscopy complemented by ex situ microscopic and spectroscopic techniques, it is unveiled that the superior cycling stability originates from the excellent phase reversibility with negligible strain response and robust mechanical behavior of SA-VO 2 upon (de)potassiation.

25 ENERGY STORAGE↗

Understanding the Benefit of Hybrid Electrolytes towards Vanadium Dissolution Suppression and Improved Capacity Retention in Zinc‐Aqueous Batteries Using NaV 3 O 8 Cathodes

Vanadate cathodes used in aqueous Zn-ion batteries with ZnSO 4 are hindered by capacity loss from V dissolution into the electrolyte. However, studies pinpointing the onset of dissolution as a function of electrochemical redox state and quantifying the amount of associated active material are lacking. To prevent dissolution of the NaV 3 O 8 active material, Na + ions are introduced into the electrolyte. Specifically, a hybrid ZnSO 4 + Na 2 SO 4 electrolyte is investigated in concert with NaV 3 O 8 (NVO) cathodes of varied crystallinity to determine the resulting impacts on cathode dissolution and functional electrochemistry. The use of Na + -containing hybrid electrolyte shows no significant change in Zn 2+ diffusion coefficients yet improved capacity retention. Time-resolved quantitative optical emission spectroscopy demonstrates the suppression of V dissolution with the hybrid electrolyte in both pristine and cycled electrodes. Operando synchrotron X-ray diffraction and absorption provide mechanistic insights. Hydrated NVO with wider interplanar spacing exhibits much higher H + /Zn 2+ capacity, while the Na 2 SO 4 mitigates the formation of irreversible side products. Furthermore, this study demonstrates that the use of hybrid electrolytes and control of crystallite size in the parent material can significantly improve electrochemical behavior of layered V-based cathodes in Zn-ion batteries, providing a general strategy toward safe and resilient aqueous battery systems.

36 MATERIALS SCIENCE↗

Vanadium oxide based nanostructured materials for catalytic oxidative dehydrogenation of propane : effect of heterometallic centers on the catalyst performance.

Catalytic properties of a series of new class of catalysts materials-[Co{sub 3}(H{sub 2}O){sub 12}V{sub 18}O{sub 42} (XO{sub 4})].24H{sub 2}O (VNM-Co), [Fe{sub 3}(H{sub 2}O){sub 12}V{sub 18}O{sub 42}(XO{sub 4})].24H{sub 2}O (VNM-Fe) (X = V, S) and [H{sub 6}Mn{sub 3}(H{sub 2}O){sub 12}V{sub 18}O{sub 42}(VO{sub 4})].30H{sub 2}O for the oxidative dehydrogenation of propane is studied. The open-framework nanostructures in these novel materials consist of three-dimensional arrays of {l_brace}V{sub 18}O{sub 42}(XO{sub 4}){r_brace} (X = V, S) clusters interconnected by {l_brace}-O-M-O-{r_brace} (M = Mn, Fe, Co) linkers. The effect of change in the heterometallic center M (M = Mn, Co, Fe) of the linkers on the catalyst performance was studied. The catalyst material with Co in the linker showed the best performance in terms of propane conversion and selectivity at 350 C. The material containing Fe was most active but least selective and Mn containing catalyst was least active. The catalysts were characterized by Temperature Programmed Reduction (TPR), BET surface area measurement, Diffuse Reflectance Infrared Fourier Transform Spectroscopy, and X-ray Absorption Spectroscopy. TPR results show that all three catalysts are easily reducible and therefore are active at relatively low temperature. In situ X-ray absorption near edge spectroscopy (XANES) and extended X-ray absorption fine structure spectroscopy (EXAFS) studies revealed that the oxidation state of Co(II) remained unchanged up to 425 C (even after pretreatment). The reduction of Co(II) into metallic form starts at 425 C and this process is completed at 600 C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗