Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “temperature effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

The Transient Dendritic Solidification Experiment (TDSE)

Dendritic solidification is a common mode of solidification. It is also an important model problem in nonequilibrium physics and pattern formation physics. Current theories couple the transfer of latent heat with selection mechanisms at the interface. Measurements of succinonitrile (SCN) dendrites in microgravity show reasonable agreement between heat transfer predictions and experiment. However, data and analysis for assessing interfacial physics theories are less definitive. We are studying, and will present data on, transient effects in dendritic growth of SCN. We employ the Clapeyron pressure/melting temperature effect to make a rapid change in a sample's hydrostatic pressure, and thereby rapidly change the specimen's melting temperature, forcing the dendrite to select a new steady-state. These initial measurements show some surprising and non-intuitive effects.

Koss, M. B.↗

The EUV chromospheric network in the quiet sun

Investigations on the structure and intensity of the chromospheric network from quiet solar regions have been carried out with EUV data obtained with a spectroheliometer on the Apollo Telescope Mount of Skylab. The distribution of intensities within supergranulation cell interiors follows a near-normal function, where the standard deviation exceeds the value expected from the counting rate, which indicates fine-scale structure below the 5 arcsec resolution of the data. The intensities from the centers of supergranulation cells appear to be the same in both quiet regions and coronal holes, although the network is significantly different in the two types of regions. The average halfwidth of the network elements was measured as 10 arcsec and was independent of the temperature of formation of the observing line for effective-temperature logarithms (log Te) from 3.8 to 5.8. The contrast between the network and the centers of cells is greatest for lines with log Te about equal to 5.2, where the network contributes approximately 75% of the intensity of quiet solar regions. The contrast and fractional-intensity contributions decrease to higher and lower temperatures characteristic of the corona and chromosphere.

Reeves, E. M.↗

The Effects of Elevated Temperatures on the Response of Resins Under Dynamic and Static Loadings

The overall objective of the research is to experimentally study the combined effects of temperature and strain rate on the response of two resins that are commonly used for the matrix material in composites. The resins are loaded at various temperatures in shear and in tension over a wide range of strain rates. These two types of loadings provide an opportunity to examine also the effect that temperature might have on the effects of the hydrostatic stress component on the material response. The experimental data provide the information needed for NASA scientists for the development of a nonlinear, strain rate, and temperature dependent deformation and strength models for composites that can subsequently be used in design. This year effort was directed into the development and testing of the epoxy resin at elevated temperatures. Two types of epoxy resins were tested in shear at high strain rates of about 10(exp-4)/s and elevated temperatures of 50 and 8OC. The results show that the temperature significantly affects the response of epoxy.

Gilat, Amos↗

Temperatures of Titan and the Galilean satellites at 20 microns.

Determination of the effective temperatures of the satellites by means of broad-band observations made at Mauna Kea in 1971. The temperatures of the Galilean satellites are in fair agreement with observations at shorter wavelengths and with theory. The 20-micron flux of Titan is nearly an order of magnitude lower than expected, suggesting either low surface emissivity or high atmospheric opacity between 18 and 25 micron. Hydrogen could produce the required opacity, but the abundance needed is large.

Morrison, D.↗

Experimental performance of the regenerator for the Chrysler upgraded automotive gas turbine engine

Automobile gas turbine engine regenerator performance was studied in a regenerator test facility that provided a satisfactory simulation of the actual engine operating environment but with independent control of airflow and gas flow. Velocity and temperature distributions were measured immediately downstream of both the core high-pressure-side outlet and the core low-pressure-side outlet. For the original engine housing, the regenerator temperature effectiveness was 1 to 2 percent higher than the design value, and the heat transfer effectiveness was 2 to 4 percent lower than the design value over the range of test conditions simulating 50 to 100 percent of gas generator speed. Recalculating the design values to account for seal leakage decreased the design heat transfer effectiveness to values consistent with those measured herein. A baffle installed in the engine housing high-pressure-side inlet provided more uniform velocities out of the regenerator but did not improve the effectiveness. A housing designed to provide more uniform axial flow to the regenerator was also tested. Although temperature uniformity was improved, the effectiveness values were not improved. Neither did 50-percent flow blockage (90 degree segment) applied to the high-pressure-side inlet change the effectiveness significantly.

Winter, J. M.↗

Effects of surface temperature and clouds on the CO2 forcing

The effects of surface temperature and clouds on the CO2 forcing are studied, based on use of the Colorado State University GCM. Results are reported from a pair of perpetual July simulations in which the sea surface temperatures differ by 4 K. The precipitable water is about 1.5 times larger in the warm run. The increased water vapor concentration amplifies the radiative effects of CO2, leading to greater CO2 forcing in the warm run. In the colder run the globally averaged reduction in upward longwave radiation due to a doubling of CO2 is 4.3 W/sq m at the level of maximum forcing, or the 'CO2 tropopause'. Above and below this level the CO2 forcing decreases, resulting in a net tropospheric warming of 0.033 K/day and a net stratospheric cooling. In the warm run the CO2 forcing at the CO2 tropopause is 4.6 W/sq m, and is associated with a tropospheric warming of 0.04 K/day. The clear-sky CO2 forcing at the CO2 tropopause is 5.0 W/sq m in the cold run, and 5.2 W/sq m in the warm run. By blocking infrared radiation that would otherwise be blocked by CO2, the clouds reduce the CO2 forcing of the surface-troposphere system by 0.66 W/sq m in the cold run, and by 0.59 W/sq m in the warm run.

Schmitt, Christina↗

Finite element nonlinear panel flutter with arbitrary temperatures in supersonic flow

A finite element frequency domain method for predicting nonlinear flutter response of panels with temperature effects is presented. By using the principle of virtual work, the element nonlinear stiffness formulation for a panel under a combined thermal and aerodynamic loads is derived on the bases of von Karman's large deflection plate theory, the first-order piston theory aerodynamics and the quasi-steady thermal stress theory. The system equations of motion can be mathematically separated into two sets of equations and then solved in sequence. The first set of equations yields the panel thermal-aerodynamic equilibrium and the second set of equations of motion leads to the flutter limit-cycle oscillations. Stability and flutter boundaries can also be obtained from the two sets of system equations. Finite element large amplitude limit-cycle flutter results at different uniform temperatures are obtained for a simply supported square panel and are compared with existing Galerkin/time integration and other finite element solutions. Effects of nonuniform temperature distributions, panel length-to-width ratios, and boundary conditions on flutter responses of rectangular and triangular panels are presented.

Xue, David Y.↗

Compensation for effects of ambient temperature on rare-earth doped fiber optic thermometer

Variations in ambient temperature have a negative effect on the performance of any fiber optic sensing system. A change in ambient temperature may alter the design parameters of fiber optic cables, connectors, sources, detectors, and other fiber optic components and eventually the performance of the entire system. The thermal stability of components is especially important in a system which employs intensity modulated sensors. Several referencing schemes have been developed to account for the variable losses that occur within the system. However, none of these conventional compensating techniques can be used to stabilize the thermal drift of the light source in a system based on the spectral properties of the sensor material. The compensation for changes in ambient temperature becomes especially important in fiber optic thermometers doped with rare earths. Different approaches to solving this problem are searched and analyzed.

Adamovsky, G.↗

Compensation for effects of ambient temperature on rare-earth doped fiber optic thermometer

Variations in ambient temperature have a negative effect on the performance of any fiber optic sensing system. A change in ambient temperature may alter the design parameters of fiber optic cables, connectors, sources, detectors, and other fiber optic components and eventually the performance of the entire system. The thermal stability of components is especially important in a system which employs intensity modulated sensors. Several referencing schemes have been developed to account for the variable losses that occur within the system. However, none of these conventional compensating techniques can be used to stabilize the thermal drift of the light source in a system based on the spectral properties of the sensor material. The compensation for changes in ambient temperature becomes especially important in fiber optic thermometers doped with rare earths. Different approaches to solving this problem are searched and analyzed.

Adamovsky, G.↗

The coolest DA white dwarfs detected at soft X-ray wavelengths

New soft X-ray/EUV photometric observations of the DA white dwarfs KPD 0631 + 1043 = WD 0631 + 107 and PG 1113 + 413 = WD 1113 + 413 are analyzed. Previously reported soft X-ray detections of three other DAs and the failure to detect a fourth DA in deep Exosat observations are investigated. New ground-based spectra are presented for all of the objects, with IUE Ly-alpha spectra for some. These data are used to constrain the effective temperatures and surface gravities. The improved estimates of these parameters are employed to refer a photospheric He abundance for the hotter objects and to elucidate an effective observational low-temperature threshold for the detection of pure hydrogen DA white dwarfs at soft X-ray wavelengths.

Kidder, K. M.↗

Bosch CO2 Reduction System Development

Refinements in the design of a Bosch CO2 reduction unit for spacecraft O2 production are described. Sealing of the vacuum insulation jacket was simplified so that high vacuum and high insulation performance are easily maintained. The device includes a relatively simple concentric shell recuperative heat exchanger which operates at approximately 95% temperature effectiveness and helps lower power consumption. The influence of reactor temperature, pressure, and recycle gas composition on power consumption was investigated. In general, precise control is not required since power consumption is not very sensitive to moderate variations of these parameters near their optimum values. There are two process rate control modes which match flow rate to process demand. Catalyst conditioning, support, and packing pattern developments assure consistent starts, reduced energy consumption, and extended cartridge life. Operation levels for four or five men were maintained with overall power input values of 50 to 60 watts per man.

Holmes, R. F.↗

A grid of model atmospheres for metal-deficient giant stars. I

A grid of flux-constant model atmospheres for stars with effective temperatures between 3750 and 6000 K, log g between 0.75 and 3.0, and (A/H) between -3.0 and 0.0 has been constructed. The line absorption is approximated by opacity distribution functions. Metal lines and molecular lines, including those from the infrared bands of CO and CN, are taken into account. The variation of the structure of the models with metal abundance and microturbulence parameter is found to be quite regular and not very drastic. The surface cooling produced by CO is important for all the models with a maximum temperature of 5000 K, while CN mainly causes a backwarming effect but is not very important for solar CNO abundances. The effects of convection, estimated by using the mixing-length approximation, are important only for the coldest models. The models compare very well with models from overlapping regions of other grids. A solar model consistent with the grid models is found to agree satisfactorily with empirical solar model atmospheres. The careful use of scaled solar models for stars with (A/H) approximately equal to zero is justified.

Gustafsson, B.↗

Far-infrared observations of Uranus, Neptune, and Ceres

During a single flight of our 102 cm balloon-borne telescope and 40-250 micron photometer we observed Uranus, Neptune, Ceres, Venus, Mars, and Saturn. Effective temperatures for Uranus (58.5 plus or minus 2 K) and Neptune (59.7 plus or minus 4 K) were determined, thus confirming the absence of a substantial internal heat source for Uranus and the presence of one for Neptune. Ceres has a brightness temperature of 195 plus or minus 12 K at an effective wavelength of 60 microns.

Stier, M. T.↗

The detection of H2 in cool carbon stars

Spectra of several carbon stars in the two micron region are examined and compared with synthetic spectra from model atmospheres. Molecular hydrogen has been directly observed in carbon stars for the first time through the quadrupole 1-0 S(1) line at 4712.9/cm. It is definitely present in several Mira variables, and is definitely not present in several irregular variables and one Mira variable. A discrepancy between the predicted and observed line depths at different temperatures is shown. Resolution of the discrepancy by change of temperature alone would require an upward revision of the present effective temperature scale by at least 600 K. Several possible resolutions of the dilemma are briefly examined.

Goebel, J. H.↗

Silicon device performance measurements to support temperature range enhancement

Semiconductor power devices are typically rated for operation below 150 C. Little data is known for power semiconductors over 150 C. In most cases, the device is derated to zero operating power at 175 C. At the high temperature end of the temperature range, the intrinsic carrier concentration increases to equal the doping concentration level and the silicon behaves as an intrinsic semiconductor. The increase in intrinsic carrier concentration results in a shift of the Fermi level toward mid-bandgap at elevated temperatures. This produces a shift in devices characteristics as a function of temperature. By increasing the doping concentration higher operating temperatures can be achieved. This technique was used to fabricate low power analog and digital devices in silicon with junction operating temperatures in excess of 300 C. Additional temperature effects include increased p-n junction leakage with increasing temperature, resulting in increased resistivity. The temperature dependency of physical properties results in variations in device characteristics. These must be quantified and understood in order to develop extended temperature range operation.

Bromstead, James↗

A dual-eigenstate polarization preserving fiberoptic sensor

A dual-eigenstate polarization preserving fiberoptic sensor is tested, in which each eigenstate in a polarization preserving fiber forms an interferometer which could measure the temperature and the strain simultaneously. The temperature and strain coefficients for different polarization fibers are measured at the room temperature, indicating that there exist differences in temperature coefficients between two eigenstates in a polarization preserving fiber. The different temperature effects from those eigenstates make it possible to perform the temperature measurement and/or temperature compensation.

Yu, Dong X.↗

Model atmospheres and radiation of magnetic neutron stars. I - The fully ionized case

Model neutron star atmospheres are calculated for typical cooling stars with a strong magnetic field and effective temperatures of 10 exp 5 to 10 exp 6 K. The effect of anisotropic photon diffusion in two normal modes are examined under the assumption that the opacity is due solely to the bremsstrahlung and Thomson scattering processes under conditions of LTE that are expected to prevail at the temperatures and densities obtained. The main aspects of anisotropic photon diffusion, and an original procedure for calculating model atmospheres and emitted spectra are discussed. Representative calculated spectra are given, and it is found that the hard spectral excess characterizing the nonmagnetic case, while still present, becomes less prominent in the presence of magnetic fields in the range of 10 exp 11 to 10 exp 13 G.

Shibanov, Iu. A.↗