Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “technical report”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

The application of parallel kinetic simulations to laser and electron transport through plasmas (Final technical report)

This is a final report for the grant entitled, “The application of parallel kinetic simulations to laser and electron transport through plasmas”. The objectives of this grant were to significantly advance the fundamental understanding of the nonlinear optics of plasmas and electron transport in high-energy-density laboratory plasmas (HEDLP), including conditions of relevance to Inertial Fusion Energy (IFE). The ultimate goal was to use the understanding to determine how to fully control laser plasma interactions. The primary research tools were our own kinetic particle-in-cell software, OSIRIS, that includes kinetic physics and can run effectively on leadership class computing facilities. Therefore, one objective was to ensure that OSIRIS in continually improved so that it was more accurate and could effectively utilize state-of-the-art computing facilities. Another objective was to attract and train young researchers into the field of high energy density plasma physics. To meet the research objectives, the funds from this proposal were used to conduct research on stimulated Raman scattering (SRS) and enhance our PIC software OSIRIS. It was found that small normalized magnetic fields can in some cases mitigate SRS and that speckles can mutually interact through SRS. It was also found that it is possible for instabilities drive near quarter critical (e.g., the high frequency hybrid instability-HFHI) can generate light waves that propagate back down a density gradient where they can rescatter into the HFHI at 1/16 of the original quarter critical density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Cyberguardians and STEM Warriors (Final Technical Report (FTR))

In the past decade, solar power, with and without energy storage has become the fastest growing source of energy generation in the world. In the U.S., solar employment more than doubled from 105,145 jobs in 2011 to 255,037 jobs in 2021, four times faster than the U.S. job growth rate overall. These factors, combined with technology advancements, creates a skills gap that puts tremendous stress on society to deliver the workers to fill the open job requisitions. The Cyberguardians and STEM Warriors project (Cyberguardians) was designed to address the trained-worker shortage in the energy industry in three ways: 1) by developing educational curriculum that addresses DER technology changes; 2) by delivering curriculum to prospective workers, including military veterans and their families, via universities, community colleges, and vocational training outlets; and 3) introducing individuals who have completed training to employers that can hire them. Cyberguardians exceeded its curriculum goals by producing 27 academic units of university-accredited material (12 total courses) covering energy fundamentals, smart inverters, Distributed Energy Resource (DER) data communication, cybersecurity, standardization, certification, data analytics, and IEEE 1547 standard topics. The North American Board of Certified Energy Practitioners (NABCEP) also accredited the material for use in their credential program. Seven instructors were recruited and trained, and six academic institutions (University of California San Diego, State University of New York, North Carolina State University, Harper Community College, Green Village Academy, and the SunSpec Alliance) were enlisted, meeting program goals. All course material was published under the Creative Commons license and made available royalty free, thus providing a long-lasting public benefit. The program’s outreach program vastly exceeded program goals and incorporated the efforts of 13 outreach partners (11 of which are veteran focused), an advisory board representing 15 companies, webinars and 10’s of thousands of email messages sent to prospective students and hiring managers. Despite these efforts, the global pandemic depressed anticipated program participation by about a third. Still, a total of 396 students enrolled and 289 completed the courses and were accredited. The job applicant task achieved similar results (111 realized vs a 174 goal) but reported job placement was weaker at (9 realized vs. a 51 goal). The Cyberguardians program fills a critical void for cost-effective, royalty-free curriculum and training pertaining to DER technologies and cybersecurity that prospective energy workers must possess to be effective in the 21 st century. On this basis alone, the investment of taxpayer funds will pay dividends for years to come.

14 SOLAR ENERGY↗
DOE OSTI2023

Further development of finite-temperature density functional theory (Technical Report on FG02-08ER46496)

The final year of funding was spent supporting research into extending conditional probability theory to generate the thermal dependence of PBE. The necessary background work led to a paper being published on the uniform electron gas (Dennis Perchak, Ryan J. McCarty, and Kieron Burke, Phys. Rev. B 105, 165143 (2022).). The graduate student John Kozlowski also contributed to a mathematical paper about DFT (Steven Crisostomo, Ryan Pederson, John Kozlowski, Bhupalee Kalita, Antonio C. Cancio, Kiril Datchev, Adam Wasserman, Suhwan Song, and Kieron Burke, Letters in Mathematical Physics 113, 42 (2023).).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Distributed Embedded Energy Converter Technologies for Marine Renewable Energy (A Technical Report)

The domain of distributed embedded energy converter technologies (DEEC-Tec) is a nascent and underexplored paradigm for harvesting and converting marine renewable energy. The paradigm distinguishes itself through its use of many small distributed embedded energy converters (DEECs) that, ultimately, are assembled through the creation of "DEEC-Tec metamaterials" to create an overall larger marine renewable energy harvesting and converting structure. As an example, such a structure could be an ocean wave energy converter - a converter whose structure is made from various types of DEEC-Tec metamaterials that harvests ocean wave energy and converts that energy into something more useful such as electricity. To that end, DEEC-Tec can be viewed at three different technology levels: (1) individual distributed embedded energy converters, also known as DEECs; (2) DEEC-Tec metamaterials-essentially, pseudo-materials made from the interconnection of many DEECs; and (3) overall larger complete marine renewable energy harvesting-converting structures-these structures being made from DEEC-Tec metamaterials. Arising directly from the application of DEEC-Tec to harvest and convert ocean wave energy are several noteworthy benefits, some of which include: (1) the lack of load concentrations into singular components or subsystems, (2) broad-banded ocean wave energy frequency harvesting and conversion, and (3) inherent redundancy-failure of some individual DEECs does not represent a failure of an entire DEEC-Tec-based WEC. This report describes DEEC-Tec by way of descriptions of those three technology levels: individual DEECs, DEEC-Tec metamaterials, and DEEC-Tec-based WECs. Moreover, the report describes corresponding research approaches and methodologies for related concepts such as DEEC-Tec-based WEC topologies and morphologies in addition to manufacturing and fabrication techniques found suitable for the application of DEEC-Tec within the general domain of marine renewable energy-moving beyond only ocean wave energy conversion.

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Disruption Mitigation Solutions for Long Pulse Tokamaks (Final Technical Report)

The project "Disruption Mitigation Solutions for Long Pulse Tokamaks" was a collaborative effort between ORNL, GA, and UCSD. The main goal of the project was to study the injection of shattered cryogenic pellets (SPI) as a method of reducing wall damage from global tokamak plasma instabilities called disruptions. This work was primarily carried out in the JET tokamak in the UK. The team already had extensive experience studying PSI in the medium sized DIII-D tokamak in the US, but adding data from the larger JET tokamak enabled more confident extrapolation to the even larger planned ITER tokamak in France. Each of the collaborating institutions focused on different aspects of SPI disruption mitigation. The UCSD collaboration focused on the volume recombination of post-disruption runaway electron (RE) beams by massive hydrogen injection. Disruptions can sometimes result in the formation of toroidal (ring shaped) beams of highly energetic (relativistic) electron beams, which can cause serious local wall damage, even in present-day tokamaks. A promising method to reduce wall damage from the RE beams is to inject massive amounts of H 2 or D 2 into the beams using SPI. although the precise method by which the injected H 2 reducses RE wall damage is still being investigated, it seems clear that a necessary and required step for the reduction to occur is for the H 2 injection to cause volume recombination (free electron density reduction) of the background cold plasma surrounding the fast electron beam. The UCSD collaboration focused on answering the question of if this recombination could be achievable in the future reactor-size tokamak ITER using realistic levels of H 2 injection. A model capturing the most essential physics was developed and was constrained using both DIII-D and JET data. This model was then used to extrapolate to ITER. It was predicted that RE beam recombination should be achievable in ITER, although in the worst-case scenari (a 10 MA Re beam in ITER), recombination is barely achieved within the maximum allowed levels of H 2 injection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Second Target Station Project (CHESS Technical Report)

CHESS is a direct geometry neutron spectrometer designed to detect and analyze weak signals intrinsic to small cross-sections (e.g., small mass, small magnetic moments or neutron absorbing materials). This instrument is optimized to enable unprecedented characterization of quantum materials, spin liquids, thermoelectric and battery materials, liquids, and soft matter. The ability to simultaneously measure dynamic processes over a wide energy range for very small samples will make CHESS the spectrometer of choice for the initial exploration of new materials. The broad dynamic range will also be well matched to measurements of relaxation processes and excitations in soft and biological matter. The 15 Hz repetition rate of STS enables use of multiple incident energies within a single source pulse, greatly expanding the information gained in a single experiment. An essential feature of CHESS is the capability for polarization analysis to separate nuclear from magnetic scattering or coherent from incoherent scattering in hydrogenous materials, and better understanding spin-anisotropic correlations. This instrument will employ advanced sample environments such as high-pressure cells, dilution refrigerators, high field cryo-magnets and polarization devices, as well as combinations of these, to solve problems at the forefront of materials research. CHESS will be one of the flagship spectrometers of the Second Target Station (STS), providing world leading capabilities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Student and Post Doctoral Support for the 8th Workshop on Nanotube Optics and Nanospectroscopy (Final Technical Report)

This project provided financial assistance for 20 postdoctoral and graduate students to attend the 8th Workshop on Nanotube Optics and Nanospectroscopy (WONTON 2022). The WONTON 2022 workshop was held in-person in Madison, Wisconsin (USA) from July 24th to 28th, 2022, and the organizers were Dr. Michael Arnold of the University of Wisconsin, Madison and Dr. Jeffrey Blackburn of the National Renewable Energy Laboratory (NREL). The funding support was specifically used to defray the registration costs of 5 postdoctoral attendees and 15 graduate students, who each participated directly in the meeting by presenting a contributed talk or poster.

2D materials↗
DOE OSTI2023

Fission with Exotic Nuclei (Full Technical Report)

Despite its importance for stockpile stewardship or nuclear forensics, data on fission is fragmentary: most experiments have only been performed on stable actinide nuclei and are often incomplete, and theoretical simulations often contain many parameters hard to constrain, which results in large uncertainties. Consequently, nuclear libraries have large gaps for important isotopes. The goal of this project was to prepare to take advantage of the unprecedented yields of radioactive isotopes at the upcoming DOE Facility for Rare Ion Beams and to leverage recent progress in the field of machine learning to develop a comprehensive program of fission studies that could address some of the most pressing problems in nuclear fission over the next several decades. Our project leveraged synergies between experimental nuclear physics, nuclear theory, and data science expertise at LLNL. On the experimental front, our main objective was to develop in-house expertise for inverse kinematics reactions with relativistic beams as well as to field and test new detectors to perform correlated measurements of fission properties. On the theoretical side, the objective was to develop a novel, high-fidelity and scalable approach of fissionfragment calculations based on emulating computationally expensive, quantum-mechanical calculations of nuclear properties with deep neural networks.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Full Technical Report: High-Rate Carbide Growth by Evaporation

Boron carbide (B 4 C) is an attractive inertial confined fusion (ICF) ablator and a unique ultra-hard material with numerous current and potential applications. What makes B 4 C attractive as an ablator is its relatively high density and the ability to form a stable glassy phase combined with excellent chemical and mechanical stability. Despite these advantages, the fabrication of B 4 C ablators has remained a challenge. Magnetron sputtering, our current frontrunner approach for B 4 C deposition, exhibits low deposition rates (< 2 μm/h) and undesirable nodular defects within the film structure that are believed to generate from the dusty plasma around the sputtering source. The goals of this project were to (1) establish alternative plasma-free, electron beam evaporation (EBE) capabilities for the deposition of thin films that are needed in mission-critical programs and; (2) demonstrate the feasibility to deposit B 4 C films at high rates by EBE in a bottom-up geometry and characterize their stoichiometry. In this feasibility study, we initially developed the capability to convert a general-use vacuum chamber into an electron beam evaporator as needed, or on demand. Then, we successfully used this setup to deposit films made of boron carbide and various other materials. By adjusting the deposition parameters and the evaporation source material, we were able to demonstrate the feasibility of reaching deposition rates as high as 8 μm/h, which is about 4 times the maximum rates obtained through sputtering methods. We predict that these values can still be further improved by implementing enhanced thermal control measures for the target source and optimizing electron beam parameters (ie. current, sweeping and frequency) since ceramic materials with similar densities to B 4 C can exhibit deposition rates of about twice this value. We anticipate that the skills and capabilities developed throughout this project will prove relevant not only to the HED and ICF campaigns but also to numerous existing and prospective applications focused on the development of ultra-hard carbide coatings. The fresh set of tools here developed will also facilitate the preparation and research on future new target materials of interest beyond B 4 C.

36 MATERIALS SCIENCE↗
DOE OSTI2023

First Principles Modeling of Cluster-Based Solid Electrolytes (Final Technical Report)

Given the trend of global warming and the urgent need to transition from fossil fuels to green energy, lithium-ion batteries continue to be an integral part of our lives. Design, development, and understanding of novel solid-state electrolyte materials play the key role for achieving next-generation all-solid-state batteries with high energy and great safety. The current modeling schemes to develop advanced solid electrolytes are focusing on materials in which the building blocks are individual atoms. Our theoretical approach is a paradigm shift in solid-state electrolyte design. Instead of atoms, we focus on clusters as the building blocks and model these solid electrolytes and their interfaces with electrodes, especially Li-metal anode, for their successful implementation in solid-state batteries. The advantage of using the cluster ions to replace elemental ions is that the size, composition, and shape of the former can be tailored to achieve higher ionic conductivity at room temperature, electrochemical stability, and charge transfer across solid-solid interfaces than conventional materials. Specifically, the project includes: (1) Developing cluster-based solid electrolytes, where the halogen components are replaced by cluster ions that mimic the chemistry of halogens but are characterized by additional degrees of freedom, including the size, shape, composition, and motional dynamics under excitation. (2) Providing a fundamental understanding of the ion conduction mechanism in the developed cluster-based solid electrolytes; (3) Modeling the interfacial properties (i.e., structural, chemical, and transport properties) between the cluster-based solid electrolytes and electrodes at the atomic level. For the cluster-based solid electrolytes incompatible with the Li-metal anode or cathode materials, potential candidates for interfacial coatings are identified and studied. (4) Providing a theoretical framework towards optimizing critical parameters of the solid-state electrolytes that guides experimentalists to attain desired cathode-electrode interface for cluster-based solid-state electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2023

Student Travel Support for the Inaugural Gordon Research Seminar on Multiphoton Processes (Final Technical Report)

This project provided financial support for early-career participants of the 2022 Gordon Research Seminar (GRS) on Multiphoton Processes, which was held on June 11 & 12, 2022 in Smithfield, Rhode Island, in conjunction with the Gordon Research Conference (GRC) on the same topic, held on June 12-17, 2022 in the same location. The GRC on Multiphoton Processes is an established conference series in the field of Atomic, Molecular and Optical (AMO) Physics with intense lasers. It regularly attracts around one hundred fifty researchers from around the world to present and discuss their forefront research featuring light-matter interaction in a variety of systems, ranging from atoms and molecules to nanosystems. In order to increase the attendance of early-career researchers at the GRC, in particular graduate students, post-docs, and other scientists with comparable levels of experience and education, the general assembly of the GRC on Multiphoton Processes decided during their last session in 2018 to organize a Gordon Research Seminar in conjunction with the next conference and organized and attended by early-career researchers. The GRS's primary intent is to provide a forum to graduate students and post-docs working in the field of intense and ultrafast AMO physics to present and exchange new data and cutting-edge ideas and to network with their peers at other research institutions around the U.S. and the world.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Tidal Resource Gaps Analysis Technical Report

The tidal resource gaps project was created to address a growing body of evidence that models underpredict tidal current speeds compared to measurements at a number of the top-ranking tidal energy sites. In response, this project compared opportunistic tidal power density measurements from 16 tidal energy hot spot sites with estimates from resource assessment data to identify discrepancies. To improve the accuracy of resource estimates from model data, updated data from eight improved model simulations were obtained. Model improvements included grid refinement, domain coupling, and the use of unstructured or nested grids. New resource estimates were calculated from the updated models, and these data were used to update the tidal hot spots-a list of promising tidal energy sites around the United States.

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Abbreviated Technical Report: Experimentally Interrogating Detonation Chemistry on Sub-Nanosecond to Nanosecond Timescales

Direct experimental measurement of chemical reactions during high explosive detonation remains challenging. Theory and modeling have long preceded experiment in the fundamental physical and chemical kinetic properties of detonation, and experimentation at the relevant timescales are needed to both validate models and provide fundamental understanding of detonation. In this LDRD-ER project, two approaches, x-ray diffraction and core-level x-ray Raman, were developed and used to further experimental capabilities to address this gap. We further developed dynamic x-ray diffraction to directly detect nanodiamond formation during detonation, providing experimental data towards resolving longstanding controversy in the scientific literature, and although the full kinetics have not yet been fully mapped, diamond diffraction appears on the same timescales as detonation soot formation. In the second research thrust, we have developed core-level x-ray Raman for use with high explosives. This technique provides information analogous to x-ray absorption spectroscopy and electron energy loss spectroscopy, but uses inelastic scattering of hard x-rays that can interrogate chemistry around light elements much deeper into the material. The low cross section and requisite high solid angle collection have hindered its use for ultra-fast spectroscopy. We developed and tested a high-q spectrometer which will substantially increase cross section and signal-to-noise, showing this method will also not dramatically alter, compared to x-ray absorption, the most discriminating spectral features of C, N, and O from various high explosives and expected detonation products. We have also used x-ray Raman combined with OCEAN electronic structure calculations to explore dynamic photodegradation mechanisms in PETN and CL-20 explosives. This provides a pathway towards implementing capability to dynamically explore chemistry at an x-ray free electron laser.

36 MATERIALS SCIENCE↗
DOE OSTI2023

USA Structures Phase 2 Technical Report

Spatially accurate data of critical infrastructures are essential to effective disaster preparedness, response, and recovery. Precise location and building outlines provide the most accurate data for characterizing impacts of hazards and effectively serve response, recovery, and mitigation efforts, as well as the people affected by the disaster. Since 2017, Oak Ridge National Laboratory (ORNL) has partnered with the Federal Emergency Management Agency (FEMA) to establish a comprehensive and open source national database of building footprints called USA Structures. Several key attributions have been added to the dataset to support rapid disaster response. In the most recent update to the dataset, ORNL developed two additional attributions to the structures, leveraging several authoritative data sources.

42 ENGINEERING↗
DOE OSTI2023

Epitaxial Multifunctional Oxide Heterostructures (DOE Final Technical Report)

The conducting interface that forms between the two band insulators LaAlO 3 (LAO) and SrTiO 3 (STO) continues to attract tremendous attention nearly 15 years after its discovery. Until recently, most of the work on this system has been done in samples grown in the (001) crystal orientation. More recently, interest has focused on samples grown in the (110) and (111) crystal orientations. While the underlying cubic crystal structure is the same, the lattice symmetry at the interface in each case is different, raising the possibility of different properties. In particular, the symmetry of the Ti atoms at the (111) interface is hexagonal, similar to graphene, leading to predictions of topological properties of the band structure. The major part of this proposal is devoted to exploring the properties of (111) LAO/STO interfaces and (111) (La 0.3 Sr 0.7 )(Al 0.65 Ta 0.35 )/STO (LSAT/STO) interfaces, where we have recently discovered interesting new effects.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Key Goals and Innovations Needed for a U.S. Compact Fusion Pilot (Final Technical Report)

Fusion energy offers the prospect of addressing the nation's energy needs and contributing to the transition to a low-carbon emission electrical generation infrastructure. Technology and research results from U.S. investments in the major fusion burning plasma experiment known as ITER, coupled with a strong foundation of research funded by the Department of Energy (DOE), position the United States to begin planning for its first fusion pilot plant. Strong interest from the private sector is an additional motivating factor, as the process of decarbonizing and modernizing the nation's electric infrastructure accelerates and companies seek to lead the way. At the request of DOE, Bringing Fusion to the U.S. Grid builds upon the work of the 2019 report Final Report of the Committee on a Strategic Plan for U.S. Burning Plasma Research to identify the key goals and innovations - independent of confinement concept - that are needed to support the development of a U.S. fusion pilot plant that can serve as a model for producing electricity at the lowest possible capital cost.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

PV Stormwater Management Research and Testing (PV-SMaRT) (Final Technical Report)

The objective of the Photovoltaic Stormwater Management Research and Testing (PV-SMaRT) project was to develop and disseminate research-based, solar-specific resources for estimating stormwater runoff at ground-mounted PV facilities and detail stormwater management and water quality best practices. The intended use of stormwater management and water quality best practices and stormwater runoff estimation resources is to reduce balance of system soft costs associated with stormwater infrastructure requirements and improve water quality through research-tested best practices. Currently, stormwater regulations and guidelines vary by jurisdiction and can lead to regulatory uncertainty and increased compliance costs for managing stormwater runoff at solar sites. To address these concerns, the NREL team and its partners (University of Minnesota, Great Plains Institute, and Fresh Energy) established and engaged an advisory Water Quality Task Force (WQTF); conducted field research on stormwater infiltration and runoff at five ground-mounted PV sites; validated a 3-D hydrologic model to predict water runoff and generate stormwater runoff coefficients for a range of site conditions and PV designs; developed a stormwater management and water quality best practices document; and engaged with local jurisdictions and other stakeholders to disseminate best practices, stormwater runoff coefficients, and other tools. Key outputs of this project were a PV-SMaRT Runoff Calculator developed by University of Minnesota, a webinar detailing project outcomes and how to use the PV-SMaRT runoff calculator, and a document on Best Practices for regulators and developers regarding stormwater runoff at PV sites.

14 SOLAR ENERGY↗
DOE OSTI2023

A Novel Molten Salt System for CO 2 Based Oxidative Dehydrogenation with Integrated Carbon Capture (Final Technical Report)

The objective of this project was to develop a comprehensive proof-of-concept for sustainable and cost-effective production of propionic acid and value-added olefins from carbon dioxide (CO 2 ) in power plant flue gas and domestic shale gas resources. This was realized via a molten-salt-mediated oxidative dehydrogenation (MM-ODH) process that performs CO 2 capture (from power plant flue gas) and CO 2- assisted alkane oxidative dehydrogenation in a two-step, thermochemical scheme. The resulting carbon monoxide (CO) and light olefin (e.g., ethylene from ethane ODH) can be subsequently converted into propionic acid via the industrially proven hydrocarboxylation process.

20 FOSSIL-FUELED POWER PLANTS↗