Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface roughness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

(abstract) Examining Sea Ice SAR Signatures in the Arctic

This research examines the seasonal changes of the sea ice cover in the Arctic Basin as it responds to atmospheric and oceanic conditions. Monitoring this process provides a means of determining the onset and extent of the annual seasonal stages, which is thought to be an indicator for detecting climate change in the polar regions. Much of the response of sea ice to seasonal conditions results in changes in the phase of water (both in the ice and snow cover), surface roughness, and internal properties such as air bubbles. Imagery from SAR has proven to be an important tool for revealing these changes since radar backscatter is affected by both surface roughness and dielectric properties of water and salt. The major ice types and ice features may have unique SAR backscatter signatures because of the inherent variations in surface roughness, salinity, and internal properties in each category.

change surface roughness dielectric properties↗
NASA NTRS1981

Remote sensing of soil moisture content over bare field at 1.4 GHz frequency

An algorithm for estimating moisture content of a bare soil from the observed brightness temperature at 1.4 GHz is discussed and applied to a limited data base. The method is based on a radiative transfer model calculation, which has been successfully used in the past to account for many observational results, with some modifications to take into account the effect of surface roughness. Besides the measured brightness temperatures, the three additional inputs required by the method are the effective soil thermodynamic temperature, the precise relation between moisture content and the smooth field brightness temperatures and a pair of parameters related to surface roughness. The procedures of estimating surface roughness parameters and of obtaining moisture content from observed brightness temperature are discussed. The algorithm is applied to observations from truck mounted and airborne radiometers. The estimated moisture contents compare favorably with the observations in the top 2 cm layer.

Wang, J. R.↗
NASA NTRS2005

Mode-expansion method for predicting radar signature above rough ocean surfaces at low-grazing angle

The Mode-Expansion Method (MEM) is introduced to calculate the electromagnetic (EM) waves scattered by 2-D rough water surfaces at low-grazing angles. The Electric Field Integral Equation (EFIE) is used in defining the problem and is simplified by using the Impedance Boundary Condition (IBC). The surface currents are expressed as the sum of modes expanded as the Fourier series with incident wave as the dominant mode. It is shown that, by the MEM and for the geometry with transmitting and receiving waves at low-grazing angles, very few modes are needed in solving the forward scattering field with reasonable accuracy.

electromagnetic (EM)↗
NASA NTRS1981

Progress in radar snow research

Multifrequency measurements of the radar backscatter from snow-covered terrain were made at several sites in Brookings, South Dakota, during the month of March of 1979. The data are used to examine the response of the scattering coefficient to the following parameters: (1) snow surface roughness, (2) snow liquid water content, and (3) snow water equivalent. The results indicate that the scattering coefficient is insensitive to snow surface roughness if the snow is drv. For wet snow, however, surface roughness can have a strong influence on the magnitude of the scattering coefficient. These observations confirm the results predicted by a theoretical model that describes the snow as a volume of Rayleig scatterers, bounded by a Gaussian random surface. In addition, empirical models were developed to relate the scattering coefficient to snow liquid water content and the dependence of the scattering coefficient on water equivalent was evaluated for both wet and dry snow conditions.

Stiles, W. H.↗
DOE OSTI2024

Experimental investigation of surface roughness/wettability pattern effect on crystallization fouling over falling-film flow

In many industries, including desalination, scaling in heat exchangers is a persistent issue, and most methods of scaling control involve environmentally hazardous chemical additives. Exploiting the effects of surface features and flow-imposed shear on salt deposition might introduce a new approach to scale management, opening the possibility of self-cleaning surfaces. In this work, we experimentally explore surface roughness and wettability patterns interaction with salt deposition and flow shear. Heat transfer and scale mass deposition on flat surfaces are measured during thin-film evaporation of calcium sulfate solution. A wide range of surface roughness (0.027–2.66 μm) is studied at fixed flow and heat flux conditions. Due to improved mixing, heat transfer is enhanced with rougher surfaces initially; however, degrades more quickly than smoother surfaces. Following a period of initial mass deposition fluctuation, a steady scaling stage is observed, with rough surfaces scaling more than smooth surfaces. Wettability patterned surfaces can suppress crystal nucleation without sacrificing overall surface wetting, resulting in antifouling performance and heat transfer enhancement. Scale mass deposition on a patterned surface is reduced by 60 %, and 27 % heat transfer improvement over the baseline surface is found. Furthermore, this study provides guidance to surface manipulation for heat transfer improvement and fouling mitigation.

42 ENGINEERING↗
NASA NTRS1984

Viking bistatic radar experiment - Summary of results in near-equatorial regions

Viking bistatic radar have been processed using Hagfors' scattering function to obtain estimates of rms surface roughness from ground tracks primarily in the equatorial region of Mars. Roughness varies from as little as 0.75 deg rms east of Solis and Sinai Plana to at least 8 deg on the western slope of Arsia Mons. Estimated roughness in cratered terrain is generally about 5 deg or less, implying the existence of smoothing processes on scales less than 100 m. There is good agreement between bistatic roughness estimates and earth-based results at ground track intersections near the equator in both cratered terrain and plains. Surface tilt probability density functions derived from these observations are usually more sharply peaked than the Hagfors function for similar values of rms surface roughness. Earlier results using the Gaussian model appear to have overestimated the surface roughness by 30-40 percent.

Simpson, R. A.↗
NASA NTRS1995

Diamond thin film temperature and heat-flux sensors

Diamond film temperature and heat-flux sensors are developed using a technology compatible with silicon integrated circuit processing. The technology involves diamond nucleation, patterning, doping, and metallization. Multi-sensor test chips were designed and fabricated to study the thermistor behavior. The minimum feature size (device width) for 1st and 2nd generation chips are 160 and 5 micron, respectively. The p-type diamond thermistors on the 1st generation test chip show temperature and response time ranges of 80-1270 K and 0.29-25 microseconds, respectively. An array of diamond thermistors, acting as heat flux sensors, was successfully fabricated on an oxidized Si rod with a diameter of 1 cm. Some problems were encountered in the patterning of the Pt/Ti ohmic contacts on the rod, due mainly to the surface roughness of the diamond film. The use of thermistors with a minimum width of 5 micron (to improve the spatial resolution of measurement) resulted in lithographic problems related to surface roughness of diamond films. We improved the mean surface roughness from 124 nm to 30 nm by using an ultra high nucleation density of 10(exp 11)/sq cm. To deposit thermistors with such small dimensions on a curved surface, a new 3-D diamond patterning technique is currently under development. This involves writing a diamond seed pattern directly on the curved surface by a computer-controlled nozzle.

Aslam, M.↗
DOE OSTI2021

Analysis of convection heat transfer on multiscale rough superhydrophobic and liquid infused surfaces

Multiscale rough superhydrophobic or slippery liquid infused porous surfaces have gained much interest in recent years for their improved transport phenomena properties. While there have been several studies on drag reduction and condensation on non-wetting surfaces, convection heat transfer that is important in many thermal and thermochemical applications has not been addressed systematically. Here, this article utilizes a fractal description of rough surface topographies to develop analytical models for the Nusselt number and the thermal hydraulic factor for fluid flow and heat transfer inside a cylinder with non-wetting surfaces. For air-infused superhydrophobic surfaces, the model considers the dynamic stability of the air/fluid interface in the asperities. Using the analytical formulations and the stability criteria, systematic studies are presented on the effects of the fractal surface parameters, cylinder radius and Reynolds number on the convective heat transfer characteristics, from which surface texture design maps are developed for maximizing the convection heat transfer. It is shown that multiscale non-wetting surfaces are most effective in the range of lower Reynolds number and small cylinder radius for achieving the best convective heat transfer and thermal hydraulic performance. Applying the models to actual non-wetting surface topographies fabricated using electrodeposition and chemical etching, it is shown that contrary to prevailing notion, superhydrophobicity, characterized by the highest contact angles, does not always lead to the maximum convective heat transfer performance, and that under certain fluid flow conditions, hydrophobic surfaces may offer a greater thermal performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1981

Viking bistatic radar experiment - Summary of first-order results emphasizing north polar data

Initial results of bistatic radar observations of Mars made by the Viking Orbiter spacecraft are presented with particular emphasis on the previously unstudied polar regions. Bistatic radar scattering experiments were performed in near-equatorial regions by the Viking Orbiter 1, while other regions of the planet were observed by the polar-orbiting Orbiter 2, with scattered signals received by stations of the NASA Deep Space Network. In the equatorial region, the bistatic radar estimates of rms surface slope are found to be in qualitative agreement with results obtained using earth-based transmitter-receivers, showing a nearly 2:1 decrease in rms surface roughness between 20 and 22 deg N with no appreciable change in dielectric constant. Data in the north polar region reveal variations in surface roughness from 1 to 6 deg, with areas of smooth material generally located within rougher environs, surface roughness decreasing along Vastitas Borealis in the direction of the north pole, and north polar cap rms roughnesses on the order of 2.5-3.0 deg. Trends in radar reflectivity suggest a decreasing surface density with increasing latitude, consistent with a layer of seasonal CO2 or H2O snow increasing in depth as the pole is approached.

Simpson, R. A.↗
DOE OSTI2020

Surface engineering to enhance heat generation and joint strength in dissimilar materials AZ31 and DP590 ultrasonic welding

A multiscale simulation approach was developed and employed to optimize the sheet surface conditions for higher interfacial temperature and joint strength in ultrasonic welding of magnesium alloy AZ31 and dual-phase steel DP590. First, a mesoscale model was used to study the relationship between friction coefficient and surface roughness, which can be modified by various engineering methods. Then a macroscopic process model was employed to study the effects of surface roughness on heat generation, indicating that a temperature increase can be achieved with rougher surfaces on two sides of both DP590 and AZ31 sheets. Samples prepared by sanding and filing, as well as grinding, were first characterized for surface roughness and then welded under ultrasonic vibration. An infrared camera was used to measure temperatures in situ for model validation. Overall, lap shear test results for the welded joint showed that the joint strength can be improved by 10~25% using filing and round grinding methods as a result of the enhanced heat generation and mechanical interlocking on the interface.

42 ENGINEERING↗
NASA NTRS2012

SAR Polarimetry

Radar Scattering includes: Surface Characteristics, Geometric Properties, Dielectric Properties, Rough Surface Scattering, Geometrical Optics and Small Perturbation Method Solutions, Integral Equation Method, Magellan Image of Pancake Domes on Venus, Dickinson Impact Crater on Venus (Magellan), Lakes on Titan (Cassini Radar, Longitudinal Dunes on Titan (Cassini Radar), Rough Surface Scattering: Effect of Dielectric Constant, Vegetation Scattering, Effect of Soil Moisture. Polarimetric Radar includes: Principles of Polarimetry: Field Descriptions, Wave Polarizations: Geometrical Representations, Definition of Ellipse Orientation Angles, Scatter as Polarization Transformer, Scattering Matrix, Coordinate Systems, Scattering Matrix, Covariance Matrix, Pauli Basis and Coherency Matrix, Polarization Synthesis, Polarimeter Implementation.

radar scattering↗
DOE OSTI2024

Uncertainty Quantification of Fatigue Behavior of Rough AM Surfaces and Microstructures to Enable Hydrogen Gas Turbine Combustion

Modification of fossil-fueled industrial gas turbines to accept no/low carbon fuels (Hydrogen, H2/natural gas blends) is a significant undertaking. Successful deployment of this technology sits at the intersection of three design criteria (1) new functional fuel injectors that can burn these fuels, (2) manufacturability to meet cost and time-to-market targets, and (3) durability in the harsh environment of an operating turbine. Additive manufacturing (AM) provides accelerated product development. However, uncertainty remains around the durability of parts with rough AM surfaces. A fully experimental approach towards quantifying fatigue performance of rough AM microstructures is costly and laborious. Instead, Solar Turbines Incorporated (Solar) proposes the use of a crystal plasticity finite element (CPFE) model to quantify the factors that drive AM surface fatigue behavior. Solar will use the CPFE results, along with targeted experimental data, to train a computationally efficient surrogate model that can be incorporated into existing turbine part lifing methods.

08 HYDROGEN↗
NASA NTRS1976

Radar characteristics of Viking 1 landing sites

Radar observations of Mars at centimeter wavelengths in May, June, and July 1976 provided estimates of surface roughness and reflectivity in three potential landing areas for Viking 1. Surface roughness is characterized by the distribution of surface landing slopes or tilts on lateral scales of the order of 1 to 10 meters; measurements of surface reflectivity are indicators of bulk surface density in the uppermost few centimeters. By these measures, the landing site at 47.5 deg W, 22.4 deg N is rougher than the Martian average, although it may be near the average for elevations accessible to Viking, and is estimated to be near the Mars average in reflectivity. The site at the center of Chryse Planitia, 43.5 deg W, 23.4 deg N, may be an area of anomalous radar characteristics, indicative of extreme, small-scale roughness, very low surface density, or a combination of these two characteristics. Observations of the original Chryse site at 34 deg W, 19.5 deg N indicate that that area is at least twice as rough as the Mars average.

Tyler, G. L.↗
DOE OSTI2025

UNR Grant Proposal Contribution

The work of Carrier et. al. (citation needed for Matt’s effect of surface roughness on phase transitions/ETI paper) demonstrates that 1D and 2D resistive magnetohydrodynamic (MHD) simulations can reliably model exploding aluminum rods driven by megaampere currents. Close agreement between simulation results and photonic Doppler velocimetry data from the Mykonos electrothermal instability (METI-II) campaign builds confidence in predictive modelling capabilities for pulsed-power HED experiments. Furthermore, 2D MHD simulations show how machined features and micro-scale surface roughness can seed the electrothermal instability (ETI). Surface roughness was observed to reduce the time of melt by 19%, with ETI growth driving the enhanced heating of the rod surface.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Assessment of Near-Angle Scatter on Exo-Earth Coronagraphy

A first order single surface analysis indicates that, to enable coronagraphic detection and characterization of exo-Earth planets, near angle scatter must be considered when specifying optical surfaces for a potential Habitable World Observatory. Based on arbitrary error budget allocations and using Rayleigh-Rice Vector Scatter Theory, Generalized Harvey-Shack Scalar Scatter Theory, and Greynolds Approximation, ‘placeholder’ specifications for the primary mirror are derived: Static Surface Roughness < 1 nm rms, and Dynamic Surface Roughness < 1 pm PV. These specifications will change once error budget allocations are defined. Analysis does not include scatter from more than just the primary mirror, coating structure, edges, contamination, micrometeoroid impacts, etc.

H. Philip Stahl↗
DOE OSTI2022

Enhanced Laplace Pressures for Functional Surfaces: Wicking, Switchability, and Selectivity

Abstract Wetting functionalities of rough surfaces are largely determined by the Laplace pressure generated across liquid–gas interfaces formed within surface structures. Typically, rough wetting surfaces create negative Laplace pressures, enabling capillary wicking, while rough non‐wetting surfaces create positive Laplace pressures, exhibiting fluid repellency. Here, with microfabricated reentrant structures, it is shown that the same surface can exhibit either a negative or positive Laplace pressure, regardless of its intrinsic wettability. This material‐independent Laplace pressure duality enables or enhances a range of wetting functionalities including wicking, switchability, and selectivity. On the same surface, capillary rise, capillary dip, and the combination of the two which leads to further enhancement of the total sustainable capillary height and Laplace pressure, the driving force for wicking is demonstrated. Further, active switching of wetting states between the hemiwicking and the repellent Cassie state on reentrant structures is shown. Moreover, with a water‐hexane mixture system, selective wetting of reentrant structures are demonstrated, that is, water can be selectively wicked or repelled in the presence of hexane, and vice versa. These functionalities are achieved, which would typically require complex chemical coatings, solely using surface structures, thus largely expanding the design space for a wide range of thermofluidic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Uncertainty Quantification of Fatigue Behavior of Rough AM Surfaces and Microstructures to Enable Hydrogen Gas Turbine

Modifying fossil-fueled industrial gas turbines to utilize low or zero-carbon fuels, such as hydrogen or hydrogen-natural gas blends, is a complex endeavor. The successful implementation of this technology hinges on three key design criteria: (1) developing new fuel injectors capable of efficiently burning alternative fuels, (2) ensuring manufacturability to meet cost and time-to-market goals, and (3) achieving component durability in the demanding environment of an operating gas turbine. Additive manufacturing (AM) accelerates product development, yet concerns persist regarding the durability of parts with rough AM surfaces. A fully experimental approach to quantify the fatigue performance of rough AM microstructures is both costly and labor-intensive. To address this, ORNL and Solar Turbines Incorporated (Solar) employed a crystal plasticity finite element (CPFE) model to identify the factors influencing AM surface fatigue behavior. These CPFE findings, combined with targeted experimental data, were used to develop a computationally efficient surrogate model suitable for assessing the lifespan of gas turbine engine components.

08 HYDROGEN↗