Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural disorder”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Optically Induced Anisotropy in Time-Resolved Scattering: Imaging Molecular-Scale Structure and Dynamics in Disordered Media with Experiment and Theory

Time-resolved scattering experiments enable imaging of materials at the molecular scale with femtosecond time resolution. However, in disordered media they provide access to just one radial dimension thus limiting the study of orientational structure and dynamics. Here we introduce a rigorous and practical theoretical framework for predicting and interpreting experiments combining optically induced anisotropy and time-resolved scattering. Using impulsive nuclear Raman and ultrafast x-ray scattering experiments of chloroform and simulations, we demonstrate that this framework can accurately predict and elucidate both the spatial and temporal features of these experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Role of structural defects in mediating disordering processes at irradiated epitaxial Fe 3 O 4 / Cr 2 O 3 interfaces

Disordering processes in oxide materials are complicated by the presence of interfaces, which can serve as either point defect sinks or accumulation sites; the response depends on factors such as interfacial structure, chemistry, and termination. Here, we have characterized the disordering of epitaxial Fe 3 O 4 (111) / Cr 2 O 3 (0001) thin film heterostructures after 400 keV Ar 2+ radiation at room temperature. The density of misfit dislocations in both the Fe 3 O 4 overlayer and Cr 2 O 3 buffer layer is varied by changing the thickness of Cr 2 O 3 to be pseudomorphically strained to the Al 2 O 3 (0001) substrate (5 nm thick) or partially relaxed (20 nm thick), as confirmed by Bragg filtering analysis of scanning transmission electron microscopy images. In both cases, irradiation leads to damage accumulation on the Fe 3 O 4 side of the heterointerface, as shown by Rutherford backscattering spectrometry measurements in the channeling geometry. However, the interface with more misfit dislocations exhibits disordering at a faster rate than the less-defective interface. Likewise, layer-resolved electron energy loss spectroscopy reveals interfacial reduction of Fe after irradiation at the more defective interface. Intermixing of Cr across the interface is observed by atom probe tomography, which is likely facilitated by the generation of Cr interstitials in Cr 2 O 3 under irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Unprecedented non-hysteretic superelasticity of [001]-oriented NiCoFeGa single crystals

Superelasticity associated with the martensitic transformation has found a broad range of engineering applications. However, the intrinsic hysteresis and temperature sensitivity of the first-order phase transformation significantly hinder the usage of smart metallic components in many critical areas. In this paper, we report a large superelasticity up to 15.2% strain in [001]-oriented NiCoFeGa single crystals, exhibiting non-hysteretic mechanical responses, a small temperature dependence and high-energy-storage capability and cyclic stability over a wide temperature and composition range. In situ synchrotron X-ray diffraction measurements show that the superelasticity is correlated with a stress-induced continuous variation of lattice parameter accompanied by structural fluctuation. Neutron diffraction and electron microscopy observations reveal an unprecedented microstructure consisting of atomic-level entanglement of ordered and disordered crystal structures, which can be manipulated to tune the superelasticity. The discovery of the large elasticity related to the entangled structure paves the way for exploiting elastic strain engineering and development of related functional materials. NiCoFeGa single crystals exhibit large non-hysteretic superelasticity over broad temperature and composition ranges. It is attributed to the continuous phase transition with applied stress, which is related to the fluctuation of entangled ordered and disordered crystal structures.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Compositional control of radionuclide retention in hollandite-based ceramic waste forms for Cs-immobilization

Hollandite materials, as a class of crystalline nuclear waste forms, are promising candidates for the immobilization of radioactive elements, such as Cs, Ba, as well as a variety of lanthanide and transition-metal fission products. In this study, three Ga-doped titanate hollandite-type phases, Ba 1.33 Ga 2.67 Ti 5.33 O 16 , Ba 0.667 Cs 0.667 Ga 2 Ti 6 O 16 , and Cs 1.33 Ga 1.33 Ti 6.67 O 16 , were synthesized using a solid-state reaction route. All synthesized phases adopted a single phase tetragonal structure, as determined by powder X-ray diffraction (XRD), and elemental analysis confirmed the measured stoichiometries were close to targeted compositions. Extended X-ray absorption fine structure spectroscopy (EXAFS) was used to determine the local structural features for the framework of octahedrally coordinated cations. EXAFS data indicated that Cs 1.33 Ga 1.33 Ti 6.67 O 16 possessed the most disordered local structure centered around the Ga dopant. The enthalpies of formation of all three hollandite phases measured using high-temperature oxide melt solution calorimetry were found to be negative, indicating enthalpies of formation of these hollandites from oxides are thermodynamically stable with respect to their constituent oxides. Furthermore, the formation enthalpies were more negative and hence more favorable with increased Cs content. Finally, aqueous leaching tests revealed that high Cs content hollandite phases exhibited greater Cs retention as compared to low Cs content hollandite. While preliminary in nature, this work draws attention to the links between the capacity for radionuclide retention, atomistic level structural features and bulk thermodynamic properties of materials.

nuclear (including radiation effects), materials a↗
DOE OSTI2014

Gallium Pnictides of the Alkaline Earth Metals, Synthesized by Means of the Flux Method: Crystal Structures and Properties of CaGa[subscript 2]Pn[subscript 2], SrGa[subscript 2]As[subscript 2], Ba[subscript 2]Ga[subscript 5]As[subscript 5], and Ba[subscript 4]Ga[subscript 5]Pn[subscript 8] (Pn = P or As)

The focus of this paper is on the structural characterization of the new Zintl phases CaGa{sub 2}P{sub 2}, CaGa{sub 2}As{sub 2}, SrGa{sub 2}As{sub 2}, and Ba{sub 2}Ga{sub 5}As{sub 5}, and the solid solution (Ba{sub 0.85(1)}Sr{sub 0.15}){sub 2}Ga{sub 5}As{sub 5}, all of which were synthesized from molten metal fluxes.CaGa{sub 2}P{sub 2}, CaGa{sub 2}As{sub 2}, and SrGa{sub 2}As{sub 2} have layered structures with polyanionic layers made of ethane-like Ga{sub 2}P6 and Ga{sub 2}As6 motifs fused through common edges; the polyanionic substructure in Ba{sub 2}Ga{sub 5}As{sub 5} consists of condensed Ga{sub 2}As6 units and GaAs{sub 4} tetrahedra. Ba{sub 4}Ga{sub 5}P{sub 8} and Ba{sub 4}Ga{sub 5}As{sub 8}, another pair of new compounds with channel-like 3D structures, were also synthesized from metal fluxes, and their structures were established from single-crystal X-ray and synchrotron powder diffraction. They are based on GaP{sub 4} and GaAs{sub 4} tetrahedra, with parts of their structures being heavily disordered. The electronic structures computed with the linear muffin-tin orbital (LMTO) method are discussed as well, alongside the thermopower and the electrical conductivity, measured on single crystals of Ba{sub 2}Ga{sub 5}As{sub 5} and the solid solution (Ba{sub 0.85(1)}Sr{sub 0.15}){sub 2} Ga{sub 5}As{sub 5}. They demonstrate that such an approach would be an effective way to fine-tune the transport properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Effect of temperature and radiation damage on the local atomic structure of metallic plutonium and related compounds

This focused review provides an overview and a framework for understanding local structure in metallic plutonium (especially the metastable fcc $δ$-phase alloyed with Ga) as it relates to self-irradiation damage. Of particular concern is the challenge of understanding self-irradiation damage in plutonium-bearing materials where theoretical challenges of the unique involvement of the 5f electrons in bonding limit the efficacy of molecular dynamics simulations and experimental challenges of working with radioactive material have limited the ability to confirm the results of such simulations and to further push the field forward. The main concentration is on extended X-ray absorption fine-structure measurements of $δ$-phase Pu, but the scope is broadened to include certain studies on plutonium intermetallics and oxides insofar as they inform the physics of damage and healing processes in elemental Pu. Here, the studies reviewed here provide insight into lattice distortions and their production, damage annealing and defect migration, and the importance of understanding and controlling sample morphology when interpreting such experiments.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Mass spectrometry structural analysis of intrinsically disordered phosphoproteins

Phosphorylation is a ubiquitous protein modification that is known to play important roles in many biological phenomena including cell signaling, the opening and closing of membrane protein channels, and even triggering of amyloid protein aggregation. Despite the effects phosphorylation has on protein function, the impact phosphorylation has on the structure of proteins is not well understood. Here, to determine how phosphorylation affects the structure of proteins, top-down mass spectrometry (TD-MS) and ion mobility-mass spectrometry (IM-MS) were performed on various phosphorylated proteins and their dephosphorylated proteoforms. TD-MS with collision- and electron-based fragmentation techniques was utilized to locate phosphorylation sites on the intrinsically disordered amyloid proteins β-casein and α-synuclein. TD-MS also provided evidence that alkaline phosphatase dephosphorylates β-casein from the N-terminus to the C-terminus. Furthermore, IM-MS of common phosphorylated proteins such as β-casein, α-casein, ovalbumin, and phosvitin indicates that phosphorylation promotes compaction of protein structure in denaturing as well as native conditions. Increases in abundance of more compact conformers are also observed when the disease related amyloid protein α-synuclein is phosphorylated at serine 129. We interpret the increased abundance of more compact conformers when proteins are phosphorylated as evidence that salt bridges form between negatively charged phosphates and positively charged residues, which alters protein structure. Salt bridge formation due to phosphorylation could be a mechanism for regulating protein function and be responsible for many of the phenomena observed in nature.

Amyloid proteins↗
DOE OSTI2019

Magnetic frustration control through tunable stereochemically driven disorder in entropy-stabilized oxides

Entropy-stabilized oxides possess a large configurational entropy that allows for the unique ability to include typically immiscible concentrations of species in different configurations. Particularly in oxides, where the physical behavior is strongly correlated to stereochemistry and electronic structure, entropic stabilization creates a unique platform to tailor the interplay of extreme structural and chemical disorder to realize unprecedented functionalities. Here, we control stereochemically driven structural disorder in single crystalline, rocksalt, (MgCoNiCuZn)O-type entropy-stabilized oxides through the incorporation of Cu 2+ cations. We harness the disorder to tune the degree of glassiness in the antiferromagnetic structure. Structural distortions driven by the Jahn-Teller effect lead to a difference in valence on the Co cation sites, which extends to dilution and disorder of the magnetic lattice. A spin glass model reveals that the fractional spin ordering of the magnetic lattice can be tuned by ~65%. These findings demonstrate entropy-stabilization as a tool for control of functional phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Peculiarities of thermoelectric half-Heusler phase formation in Gd-Ni-Sb and Lu-Ni-Sb ternary systems

The phase equilibria in the Gd–Ni–Sb and Lu-Ni-Sb ternary systems were studied at 873 K by X-ray and metallographic analyses in the whole concentration range. The interaction of the elements in the Gd–Ni–Sb system results the formation of five ternary compounds at investigated temperature: Gd{sub 5}Ni{sub 2}Sb (Mo{sub 5}SiB{sub 2}-type), Gd{sub 5}NiSb{sub 2} (Yb{sub 5}Sb{sub 3}-type), GdNiSb (MgAgAs-type), Gd{sub 3}Ni{sub 6}Sb{sub 5} (Y{sub 3}Ni{sub 6}Sb{sub 5}-type), and GdNi{sub 0.72}Sb{sub 2} (HfCuSi{sub 2}-type). At investigated temperature the Lu-Ni-Sb system is characterized by formation of the LuNiSb (MgAgAs-type), Lu{sub 5}Ni{sub 2}Sb (Mo{sub 5}SiB{sub 2}-type), and Lu{sub 5}Ni{sub 0.56}Sb{sub 2.44} (Yb{sub 5}Sb{sub 3}-type) compounds. The disordering in the crystal structure of half-Heusler GdNiSb and LuNiSb was revealed by EPMA and studied by means of Rietveld refinement and DFT modeling. The performed electronic structure calculations are in good agreement with electrical transport property studies. - Graphical abstract: Crystal structure model and electron localization function of Lu{sub 5}Ni{sub 2}Sb. Display Omitted - Highlights: • Gd-Ni-Sb and Lu-Ni-Sb phase diagrams were constructed at 873 K. • GdNiSb and LuNiSb are characterized by disordered crystal structure. • Crystal structure optimization with DFT calculations confirmed crystal structure disorder in GdNiSb and LuNiSb.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Li-rich Li[Li1/6Fe1/6Ni1/6Mn1/2]O2 (LFNMO) Cathodes: Atomic Scale Insight on the Mechanisms of Cycling Decay and of the Improvement due to Cobalt Phosphate Surface Modification

Lithium-rich Li[Li1/6Fe1/6Ni1/6Mn1/2]O2(0.4Li2MnO3-0.6LiFe1/3Ni1/3Mn1/3O2, LFNMO) is a new member of the xLi2MnO3·(1-x)LiMO2 family of high capacity - high voltage LIB cathodes. Unfortunately, it suffers from the severe degradation during cycling both in terms of reversible capacity and operating voltage. We are the first to document the corresponding degradation occurring in LFNMO at an atomic scale using aberration- corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) , as well as tracing the elemental crossover to the Li metal anode using XPS. We also demonstrate that a phosphate coating significantly boosts LFNMO cycling stability and rate capability. Due to cycling, the unmodified LFNMO undergoes extensive elemental dissolution (especially Mn) and O loss, forming Kirkendall-type voids. The associated structural degradation is from the as-synthesized R-3m layered structure to a disordered rock-salt phase. Prior to cycling, the phosphate coating shares the crystallography of the parent material. During cycling, a 2-3 nm thick disordered Co-based rock-salt structure is formed on the Mod-LFNMO surface, while the bulk material retains R-3m crystallography. Electrochemical impedance spectroscopy (EIS) analysis highlights how the phosphide treatment stabilizes the charge transfer resistance (RCT), the CEI resistance (RCEI), and the lithium ion diffusion coefficient (DLi). XPS analysis demonstrates that the coating also reduces the amount of cross-over Mn, Fe and especially Ni deposited on the Li metal anode, which is expected to lead to a more stable SEI layer during cycling. These combined cathode - anode findings significantly advance the microstructural design principles for next generation Li-rich cathode materials and coatings.

: high voltage cathode, Li - and Mn - rich cathode↗
DOE OSTI2023

Experimental observation of spin glass state in the highly disordered quaternary Heusler alloy FeRuMnGa

The realization of the spin-glass (SG) state in Heusler alloys is very rare despite the presence of inherent structural and elemental disorder in those compounds. Although a few half- and full-Heusler alloys are known to exhibit the SG state, there is hardly any manifestation of the same in cases of quaternary Heusler compounds. Here we report the observation of a SG state in a highly disordered equiatomic quaternary Heusler compound: FeRuMnGa where the SG state is in between the canonical SG and the cluster glass. Different intricate features of the SG state including nonequilibrium magnetic dynamics at low temperatures in the compound are unveiled through our comprehensive magnetic, heat capacity, and neutron-diffraction studies. Further the structural disorder in the sample is neither conventional A2 - nor B2 -type whereas those two types are commonly observed for Heusler compounds. The presence of disorder also plays a significant role in electron transport properties of the alloy, which is reflected in its exhibition of semimetallic behavior and anomalous Hall effect at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Accurate prediction of short-range order and its effect on thermodynamic, structural, and electronic properties of disordered alloys: exemplified in archetypical Cu 3 Au

Electronic-structure methods based on density-functional theory (DFT) were used to quantify the effect of chemical short-range order (SRO) on thermodynamic, structural, and electronic properties of archetypal face-centered-cubic (fcc) Cu3Au alloy. We showed that SRO can be tuned to alter bonding and lattice dynamics (i.e., phonons) and detail how these properties are changed with SRO. Thermodynamically favorable SRO significantly improved the phase stability of fcc Cu3Au from -0.0343 eV-atom -1 to –0.0682 eV-atom -1 . We used our DFT-based linear-response theory to predict SRO and its electronic origin, and accurately estimate the observed transition temperature, ordering instability (L1 2 ), and Warren-Cowley SRO parameters, in agreement with experiments. The accurate prediction of real-space SRO gives an edge over computationally and resource intensive approaches such as monte-carlo methods or experiments, which will enable large scale molecular dynamic simulations by providing supercells with optimized SRO. Here we also analyzed phonon dispersion and estimated the vibrational entropy change (from 9kB at 300 K to 6kB at 100 K) in fcc Cu3Au. We established from SRO analysis that exclusion of chemical interactions may lead to a skewed view of true properties in chemically complex alloys. The first-principles methods described in this work are generally applicable to any arbitrary solid-solution alloys, including multi-principal-element alloys, therefore, holds promise for designing technologically useful materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Transient local secondary structure in the intrinsically disordered C‐term of the Albino3 insertase

Albino3 (Alb3) is an integral membrane protein fundamental to the targeting and insertion of light‐harvesting complex (LHC) proteins into the thylakoid membrane. Alb3 contains a stroma‐exposed C‐terminus (Alb3‐Cterm) that is responsible for binding the LHC‐loaded transit complex before LHC membrane insertion. Alb3‐Cterm has been reported to be intrinsically disordered, but precise mechanistic details underlying how it recognizes and binds to the transit complex are lacking, and the functional roles of its four different motifs have been debated. Using a novel combination of experimental and computational techniques such as single‐molecule fluorescence resonance energy transfer, circular dichroism with deconvolution analysis, site‐directed mutagenesis, trypsin digestion assays, and all‐atom molecular dynamics simulations in conjunction with enhanced sampling techniques, we show that Alb3‐Cterm contains transient secondary structure in motifs I and II. The excellent agreement between the experimental and computational data provides a quantitatively consistent picture and allows us to identify a heterogeneous structural ensemble that highlights the local and transient nature of the secondary structure. This structural ensemble was used to predict both the inter‐residue distance distributions of single molecules and the apparent unfolding free energy of the transient secondary structure, which were both in excellent agreement with those determined experimentally. We hypothesize that this transient local secondary structure may play an important role in the recognition of Alb3‐Cterm for the LHC‐loaded transit complex, and these results should provide a framework to better understand protein targeting by the Alb3‐Oxa1‐YidC family of insertases.

Okoto, Patience S.↗
DOE OSTI2016

Environmentally induced chemical and morphological heterogeneity of zinc oxide thin films

Zinc oxide (ZnO) thin films have been reported to suffer from degradation in electrical properties, when exposed to elevated heat and humidity, often leading to failures of electronic devices containing ZnO films. This degradation appears to be linked to water and oxygen penetration into the ZnO film. However, a direct observation in the ZnO film morphological evolution detailing structural and chemical changes has been lacking. Here, we systematically investigated the chemical and morphological heterogeneities of ZnO thin films caused by elevated heat and humidity, simulating an environmental aging. X-ray fluorescence microscopy, X-ray absorption spectroscopy, grazing incidence small angle and wide angle X-ray scattering, scanning electron microscopy (SEM), ultra-high-resolution SEM, and optical microscopy were carried out to examine ZnO and Al-doped ZnO thin films on two different substrates—silicon wafers and flexible polyethylene terephthalate (PET) films. In the un-doped ZnO thin film, the simulated environmental aging is resulting in pin-holes. In the Al-doped ZnO thin films, significant morphological changes occurred after the treatment, with an appearance of platelet-shaped structures that are 100–200 nm wide by 1μm long. Synchrotron x-ray characterization further confirmed the heterogeneity in the aged Al-doped ZnO, showing the formation of anisotropic structures and disordering. X-ray diffraction and X-ray absorption spectroscopy indicated the formation of a zinc hydroxide in the aged Al-doped films. In conclusion, utilizing advanced characterization methods, our studies provided information with an unprecedented level of details and revealed the chemical and morphologically heterogeneous nature of the degradation in ZnO thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Vacancies in ordered and disordered titanium monoxide: Mechanism of B1 structure stabilization

The electronic structure and stability of three phases of titanium monoxide TiO{sub y} with B1 type of the basic structure have been studied. Cubic phase without structural vacancies, TiO, and two phases with structural vacancies, monoclinic Ti{sub 5}O{sub 5} and cubic disordered TiO{sub 1.0}, was treated by means of first-principles calculations within the density functional theory with pseudo-potential approach based on the plane wave's basis. The ordered monoclinic phase Ti{sub 5}O{sub 5} was found to be the most stable and the cubic TiO without vacancies the less stable one. The role of structural vacancies in the titanium sublattice is to decrease the Fermi energy, the role of vacancies in the oxygen sublattice is to contribute to the appearance of Ti–Ti bonding interactions through these vacancies and to reinforce the Ti–Ti interactions close to them. Listed effects are significantly pronounced if the vacancies in the titanium and oxygen sublattices are associated in the so called “vacancy channels” which determine the formation of vacancy ordered structure of monoclinic Ti{sub 5}O{sub 5}-type. - Graphical abstract: Changes in total DOS of titanium monoxide when going from vacancy-free TiO to TiO with disordered structural vacancies and to TiO with ordered structural vacancies. Highlights: • Ordered monoclinic Ti{sub 5}O{sub 5} is the most stable phase of titanium monoxide. • Vacancy-free TiO is the less stable phase of the titanium monoxide. • Ordering of oxygen vacancies leads to the appearance of Ti–Ti bonding interactions. • Titanium vacancies contribute significantly to the decreasing of the Fermi energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Bayesian force fields from active learning for simulation of inter-dimensional transformation of stanene

Abstract We present a way to dramatically accelerate Gaussian process models for interatomic force fields based on many-body kernels by mapping both forces and uncertainties onto functions of low-dimensional features. This allows for automated active learning of models combining near-quantum accuracy, built-in uncertainty, and constant cost of evaluation that is comparable to classical analytical models, capable of simulating millions of atoms. Using this approach, we perform large-scale molecular dynamics simulations of the stability of the stanene monolayer. We discover an unusual phase transformation mechanism of 2D stanene, where ripples lead to nucleation of bilayer defects, densification into a disordered multilayer structure, followed by formation of bulk liquid at high temperature or nucleation and growth of the 3D bcc crystal at low temperature. The presented method opens possibilities for rapid development of fast accurate uncertainty-aware models for simulating long-time large-scale dynamics of complex materials.

Chemistry↗