Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stability properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Tuning the Magnetic Properties and Structural Stabilities of the 2-17-3 Magnets Sm 2 Fe 17 X 3 (X=C, N) by Substituting La or Ce for Sm

Designing a permanent magnet with reduced critical rare-earth content is of paramount importance in the development of cost-effective modern technologies. By performing comprehensive first-principles calculations, we investigate the potential avenues for reducing the critical rare-earth content in Sm 2 Fe 17 N 3 and Sm 2 Fe 17 C 3 by making a La or Ce substitution for Sm. The calculated magnetic properties of base compounds are in good agreement with the previous low-temperature (4.2-K) experimental measurements, and they show a large axial anisotropy. Although La or Ce substitution results in a slight reduction of magnetic anisotropy, the magnetic moments of Fe atoms mostly remain unchanged. Specifically, large axial anisotropies of 7.2 and 4.1 MJ/m 3 are obtained for SmCeFe 17 N 3 and SmLaFe 17 N 3 , respectively. These values of anisotropies are comparable to the state-of-the-art permanent magnet Nd 2 Fe 14 B. The foremost limitation of Sm 2 Fe 17 X 3 magnets for practical application is the formation nitrogen or carbon vacancies at high temperatures. By calculating the N- (C)- vacancy formation energy, we show that La or Ce substitution enhances the vacancy formation energy. Here, this enhanced vacancy formation energy will likely improve the thermodynamic stability of these alloys at high temperatures. Therefore, La- or Ce-substituted Sm 2 Fe 17 C 3 and Sm 2 Fe 17 N 3 compounds are promising candidates for high-performance permanent magnets with substantially reduced rare-earth content.

36 MATERIALS SCIENCE↗

High thermal stability of piezoelectric properties in (Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}){sub x}-(BaTiO{sub 3}){sub y}-(Na{sub 0.5}K{sub 0.5}NbO{sub 3}){sub 1-x-y} ceramics

We report the piezoelectric and ferroelectric properties of (Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}){sub x}-(BaTiO{sub 3}){sub y}-(Na{sub 0.5}K{sub 0.5}NbO{sub 3}){sub 1-x-y} ceramics for Na{sub 0.5}K{sub 0.5}NbO{sub 3} rich end of composition (x, y {<=} 0.04 mol. %). These compositions were found to exhibit significantly improved thermal stability of piezoresponse. Variation of dielectric constant as a function of temperature revealed that orthorhombic-tetragonal (T{sub o-t}) and tetragonal-cubic (T{sub c}) transition temperatures for these compositions were in the vicinity of 0 Degree-Sign C and 330 Degree-Sign C, respectively. Dynamic scaling and temperature dependent X-ray diffraction analysis were conducted. Results are discussed in terms of intrinsic and extrinsic contributions to the piezoelectric response explaining the temperature dependent behavior.

36 MATERIALS SCIENCE↗

Transient Catenation in a Zirconium-Based Metal–Organic Framework and Its Effect on Mechanical Stability and Sorption Properties

Interpenetration of two or more sublattices is common among many metal–organic frameworks (MOFs). In this study, we study the evolution of one zirconium cluster-based, 3,8-connected MOF from its non-interpenetrated (NU-1200) to interpenetrated (STA-26) isomer. We observe this transient catenation process indirectly using ensemble methods, such as nitrogen porosimetry and X-ray diffraction, and directly, using high-resolution transmission electron microscopy. The approach detailed here will serve as a template for other researchers to monitor the interpenetration of their MOF samples at the bulk and single-particle limits. We investigate the mechanical stability of both lattices experimentally by pressurized in situ X-ray diffraction and nanoindentation as well as computationally with density functional theory calculations. Both lines of study reveal that STA-26 is considerably more mechanically stable than NU-1200. We conclude this study by demonstrating the potential of these MOFs and their mixed phases for the capture of gaseous n-hexane, used as a structural mimic for the chemical warfare agent sulfur mustard gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Ultrahigh CO 2 -Loaded Silicalite-1 Zeolite: Structural Stability and Physical Properties at High Pressures and Temperatures

We report the formation of an ultrahigh CO 2 -loaded pure-SiO 2 silicalite-1 structure at high pressure (0.7 GPa) from the interaction of empty zeolite and fluid CO 2 medium. The CO 2 -filled structure was characterized in situ by means of synchrotron powder X-ray diffraction. Rietveld refinements and Fourier recycling allowed the location of 16 guest carbon dioxide molecules per unit cell within the straight and sinusoidal channels of the porous framework to be analyzed. The complete filling of pores by CO 2 molecules favors structural stability under compression, avoiding pressure-induced amorphization below 20 GPa, and significantly reduces the compressibility of the system compared to that of the parental empty one. Additionally, the structure of CO 2 -loaded silicalite-1 was monitored at high pressures and temperatures, and its thermal expansivity was estimated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tribological properties and thermal stability of various types of polyimide films

Thermal exposure experiments at 315 and 350 C were conducted on seven different types of polyimide films to determine which was the most thermally stable and adherent. The polyimides were ranked according to the rate at which they lost weight and how well they adhere to the metallic substrate. Friction and wear experiments were conducted at 25 C (room temperature) on films bonded to 440C HT stainless steel. Friction, film wear rates, wear mechanisms, and transfer films of the seven films were investigated and compared. The polyimides were found to fall into two groups as far as friction and wear properties were concerned. Group one had lower friction but an order of magnitude higher film wear rate than did group two. The wear mechanism was predominately adhesive, but the size of the wear particles were larger for group one polyimides.

Fusaro, R. L.↗

Tribological properties and thermal stability of various types of polyimide films

Thermal exposure experiments at 315 and 350 C were conducted on seven different types of polyimide films to determine which was the most thermally stable and adherent. The polyimides were ranked according to the rate of which they lost weight and how well they adhered to the metallic substrate. Friction and wear experiments were conducted at 25 C (room temperature) on films bonded to 440C HT stainless steel. Friction, film wear rates, wear mechanisms, and transfer films of the seven films were investigated and compared. The polyimides were found to fall into two groups as far as friction and wear properties were concerned. Group I had lower friction but an order of magnitude higher film wear rate than did group II. The wear mechanism was predominately adhesive, but the size of the wear particles was larger for group I polyimides.

Fusaro, R. L.↗

Influence of Welding Combined Plastic Forming on Microstructure Stability and Mechanical Properties of Friction Stir-Welded Al-Cu Alloy

A new tailor-welded process, which combines stages of welding, plastic forming, and heat treatment strengthening, was developed to produce a friction stir-welded (FSW) Al-alloy joint. The Al-Cu sheets were FSW under different welding parameters and then were plastic-deformed. The microstructural evolution and mechanical properties of the FSW joint were investigated by scanning electron microscopy and tensile tests. It was found that high heat input during FSW and low solution temperature suppress the abnormal grain growth (AGG) of the joint due to the differential in grain size and grain boundary energy. The microstructure heterogeneity of the FSW joint is effectively improved, as no AGG occurs. The retention of fine equiaxed grains and the increase in the density of precipitates result in excellent mechanical properties. The increase in the strength and micro-hardness of the joint mainly depends on the plastic deformation prior to aging treatment.

36 MATERIALS SCIENCE↗

Poly(alkyl methacrylate) Brush-Grafted Silica Nanoparticles as Oil Lubricant Additives: Effects of Alkyl Pendant Groups on Oil Dispersibility, Stability, and Lubrication Property

This paper reports on the synthesis of a series of poly(alkyl methacrylate) brush-grafted, 23 nm silica nanoparticles (hairy NPs) and the study of the effect of alkyl pendant length on their use as oil lubricant additives for friction and wear reduction. The hairy NPs were prepared by surface-initiated reversible addition–fragmentation chain transfer polymerization from trithiocarbonate chain transfer agent (CTA)-functionalized silica NPs in the presence of a free CTA. We found that hairy NPs with sufficiently long alkyl pendant groups (containing >8 carbon atoms, such as 12, 13, 16, and 18 in this study) could be readily dispersed in poly(alphaolefin) (PAO), forming clear, homogeneous dispersions, and exhibited excellent stability at low and high temperatures as revealed by visual inspection and dynamic light scattering studies. Whereas poly(n-hexyl methacrylate) hairy NPs cannot be dispersed in PAO under ambient conditions or at 80 °C, interestingly, poly(2-ethylhexyl methacrylate) hairy NPs can be dispersed in PAO at 80 °C but not at room temperature, with a reversible clear-to-cloudy transition observed upon cooling. High-contact-stress ball-on-flat reciprocating sliding tribological tests at 100 °C showed significant reductions in both the coefficient of friction (up to 38%) and wear volume (up to 90% for iron flat) for transparent, homogeneous dispersions of hairy NPs in PAO at a concentration of 1.0 wt % compared with neat PAO. Finally, the formation of a load-bearing tribofilm at the rubbing interface was confirmed using scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy.

36 MATERIALS SCIENCE↗

Investigation of structural stability and elastic properties of Zrh and Zrh{sub 2}: A first principles study

The electronic, structural and mechanical properties of ZrH and ZrH{sub 2} are investigated by means of first principles calculation based on density functional theory as implemented in VASP code with generalized gradient approximation. The calculated ground state properties are in good agreement with previous experimental and other theoretical results. Among the six crystallographic structures considered for ZrH, ZB phase is found to be the most stable phase, whereas ZrH{sub 2} is energetically stable in tetragonal structure at ambient condition. A structural phase transition from ZB→NaCl at a pressure 10 GPa is predicted for ZrH.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal stability and tribological properties of CrZr-Si-N films synthesized by closed field unbalanced magnetron sputtering

In this work, CrZr-Si-N films with various Si contents ({<=}6.4 at. %) were synthesized by closed field unbalanced magnetron sputtering with vertical magnetron sources. The characteristics such as hardness, surface morphology, and friction coefficient of the films as a function of the Si content after annealing up to 500 degree sign C in air were evaluated. Results revealed that the as-deposited films showed very similar characteristics irrespective of the Si content. However, after annealing at 500 degree sign C, the film characteristics showed a strong dependency upon the Si content. After annealing at 500 degree sign C, the hardness of the Cr{sub 39.4}Zr{sub 12.3}N{sub 48.3} film decreased significantly to approximately 24 GPa and the surface roughness value increased approximately 3.5 times more than that of the as-deposited film. The Cr{sub 34.6}Zr{sub 10.6}-Si{sub 6.4}-N{sub 48.4} film, however, was observed to have a hardness of approximately 30 GPa, which is close to that of the as-deposited film, 32 GPa. In addition, as the wear test temperature increased from room temperature to 500 degree sign C, the average friction coefficient of the Cr{sub 39.4}Zr{sub 12.3}N{sub 48.3} film increased significantly from approximately 0.23 to 0.81, but the average friction coefficient of the Cr{sub 34.6}Zr{sub 10.6}-Si{sub 6.4}-N{sub 48.4} film was not changed extensively, measuring approximately 0.43. These results could be attributed to the improvement of the thermal stability by adding Si into the Cr-Zr-N films.

36 MATERIALS SCIENCE↗

Structural stability and electronic properties of low-index surfaces of SnS

Thin film photovoltaic cells are increasingly important for cost-effective solar energy harvesting. Layered SnS is a promising absorber material due to its high optical absorption in the visible and good doping characteristics. We use first-principles calculations based on density functional theory to study structures of low-index surfaces of SnS using stoichiometric and oxygen-containing structural models, in order to elucidate their possible effect on the efficiency of the photovoltaic device. We find that the surface energy is minimized for the surface with orientation parallel to the layer stacking direction. Compared to stoichiometric surfaces, the oxygen-containing surfaces exhibit fewer electronic states near the band gap. This reduction of near-gap surface states by oxygen should reduce recombination losses at grain boundaries and interfaces of the SnS absorber, and should be beneficial to the efficiency of the solar cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of oxygen incorporation in GeSbTe films on electrical properties and thermal stability

Oxygen incorporated Ge{sub 2}Sb{sub 2}Te{sub 5} (GST) films were prepared by an ion beam sputtering deposition method. I-V curves of the oxygen incorporated GST active layer showed that the threshold voltage (V{sub th}) varied, depending on the level of incorporated oxygen. In the case of a GST film with an elevated oxygen content of 30.8%, the GST layer melted at 9.02 V due to the instability conferred by the high oxygen content. The formation of Ge-deficient hexagonal phases such as GeSb{sub 2}Te{sub 4} and Sb{sub 2}Te{sub 3} appear to be responsible for the V{sub th} variation. Impedance analyses indicated that the resistance in GST films with oxygen contents of 16.7% and 21.7% had different origins. Thermal desorption spectroscopy data indicate that moisture and hydrocarbons were more readily desorbed at higher oxygen content because the oxygen incorporated GST films are more hydrophilic than undoped GST films.

36 MATERIALS SCIENCE↗

Stability, electronic structures and thermoelectric properties of binary Zn–Sb materials

We report first principles studies of the binary Zn–Sb phases in relation to thermoelectric properties and chemical stability. We identify the unknown structure of the Zn 3 Sb 2 phase using particle swarm optimization, finding a tetragonal structure different from the hexagonal Mg 3 Sb 2 and the hexagonal or cubic Ca 3 Sb 2 phases. All the phases are found to be semiconducting with bandgaps in the range of 0.06–0.77 eV. This semiconducting behavior is understood in Zintl terms as a balance between the Zn:Sb and Sb 3- :½(Sb 2 ) 4- ratios in the stable crystal structures. With the exception of Zn 3 Sb 2 , which has a small gap, all the compounds have electronic properties favorable for thermoelectric performance.

36 MATERIALS SCIENCE↗

Structural stability and electronic properties of β-tetragonal boron: A first-principles study

It is known that elemental boron has five polymorphs: α- and β-rhombohedral, α- and β-tetragonal, and the high-pressure γ phase. β-tetragonal (β-t) boron was first discovered in 1960, but there have been only a few studies since then. We have thoroughly investigated, using first-principles calculations, the atomic and electronic structures of β-t boron, the details of which were not known previously. The difficulty of calculation arises from the fact that β-t boron has a large unit cell that contains between 184 and 196 atoms, with 12 partially-occupied interstitial sites. This makes the number of configurations of interstitial atoms too great to calculate them all. By introducing assumptions based on symmetry and preliminary calculations, the number of configurations to calculate can be greatly reduced. It was eventually found that β-t boron has the lowest total energy, with 192 atoms (8 interstitial atoms) in an orthorhombic lattice. The total energy per atom was between those of α- and β-rhombohedral boron. Another tetragonal structure with 192 atoms was found to have a very close energy. The valence bands were fully filled and the gaps were about 1.16 to 1.54 eV, making it comparable to that of β-rhombohedral boron. - Graphical abstract: Electronic density distribution for the lowest-energy configuration (N=192) viewed from the 〈1 0 0〉 direction. Left: isosurface (yellow) at d=0.09 electrons/a.u.{sup 3} Right: isosurface (orange) at d=0.12 electrons/a.u.{sup 3}. - Highlights: • β-tetragonal boron was thoroughly investigated using first-principles calculations. • The lowest energy structure contains 192 atoms in an orthorhombic lattice. • Another tetragonal structure with 192 atoms has a very close energy. • The total energy per atom is between those of α- and β-rhombohedral boron. • The band gap of the lowest energy structure is about 1.16 to 1.54 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain as a Global Factor in Stabilizing the Ferroelectric Properties of ZrO 2

Since the discovery of ferroelectricity in doped HfO 2 and ZrO 2 thin films over a decade ago, fluorite-structured ferroelectric thin films have attracted much research attention due to their excellent scalability and complementary metal-oxide semiconductor compatibility compared to conventional perovskite ferroelectric materials. Although various factors influencing the formation of the ferroelectric properties are identified, a clear understanding of the causes of the phase formation have been difficult to determine. In this work, ZrO 2 films deposited by atomic layer deposition and chemical solution deposition have resulted in films with completely different structural properties. Regardless of these differences, a general relationship between strain and phase formation is established, leading to a more unified understanding of ferroelectric phase formation in undoped ZrO 2 films, which can be applied to other fluorite-structured films.

36 MATERIALS SCIENCE↗

Thermal stability and protective properties of phenylphosphonic acid on Cu(111)

Phenylphosphonic acid (PPA) adsorbed on Cu(111) has been studied by synchrotron radiation-based techniques in combination with density functional theory calculations. Here, the dehydrogenated phenylphosphonic acid molecule (PP) strongly bound in a tridentate geometry through oxygen atoms to Cu(111) is shown to be the dominant surface species in the temperature range 150–300 °C. The stable PP adlayer substantially protects the Cu(111) surface from oxidation during exposure to ambient conditions. Thermal treatment of the PPA adlayer at 375 °C initiates molecular decomposition through several channels: P–O bond scission forming C 6 H 5 PO 2 ; C–P bond scission forming phenyl and PO 3 ; and C–H bond scission forming C 6 H 4 PO 3 . All three reaction steps have activation barriers of 1.7–1.8 eV. Small products such as O, H, and phenyl can immediately react further and desorb, while the remaining phosphonate species undergo condensation. After annealing at a higher temperature, the phosphonate group is further reduced from oxygen-rich to phosphorus-rich species, which form the majority of remaining adsorbates after 500 °C treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗