Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spatial mapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

High-speed wide-angle interleaved scanning technique for a 3D imaging lidar

In this paper, we describe a novel interleaved scanner for an eye-safe 3D scanning lidar system to measure aerodynamic phenomena in a wind tunnel using elastic backscatter from seeding particles. The scanner assembly consists of a rotating polygon scanner for line scanning along the fast axis, a galvanometer (galvo) scanner for scanning along the slow axis, angular position sensors and motor controllers. The polygon scanner sweeps the lidar beam at up to 10,000 lines/s across a 27 deg angular field-of-regard in the fast axis, while the galvo scanner covers an angular range of 20 deg in the slow axis. Using this scanner, the lidar can perform non-intrusive flow visualization, velocimetry, and hard target mapping at mmscale spatial resolution to a standoff range of 5 m at an update rate of 50 Hz for the full field-of-regard. An interleaved scanning methodology for the acquisition of two snapshots of 3D lidar intensity data with a 100 μs time offset is discussed. The design of the control and data acquisition electronics is described. The effects of rapid scanning on the response of a narrow field-of-view lidar are addressed. The design of the scanner is scalable and can be tailored to meet the requirements of other applications by increasing or decreasing the standoff range, angular field-of-regard and scan rate.

3D Imaging Lidar↗
NASA NTRS2021

Argentina Food Security & Agriculture: Crop Monitoring and Forecasting for Argentina using NASA Satellite Observations

Early harvest information helps guide agricultural commodity assessments in Argentina, providing valuable planning information to identify potentially food-insecure regions, anticipate transportation and storage demands, predict price fluctuations, and project commodity trends. However, crop yield estimates are currently subjective, based on interviews with qualified informants (i.e., farmers, agribusiness actors). In partnership with the Buenos Aires Grain Exchange, we leveraged Terra Moderate Resolution Imaging Spectroradiometer (MODIS), Soil Moisture Active Passive (SMAP), and Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (GPM IMERG) NASA Earth observations to develop a Google Earth Engine (GEE) toolset to monitor vegetation growth. The first component of the toolset produces spatial and temporal maps of temperature, precipitation, soil moisture, and the Normalized Difference Vegetation Index (NDVI), allowing users to visualize the influence of the region’s climate and weather. Next, we developed an autoregressive model to predict NDVI several months in advance. Lastly, we created a linear regression model of crop yield and NDVI for soybeans, corn, and wheat, and input the forecasted NDVI to generate a predicted crop yield output. The NDVI forecasting model produced accurate predictions at two, four, and six months when examining the most recent growing season. In the crop yield model, soybeans exhibited moderately strong correlation, wheat had consistent weak correlation, and corn varied from weak to strong correlation depending on zone. This information is vital for vegetation growth monitoring by identifying areas of high growth and allocating resources to areas of lower growth to efficiently maximize crop yields.

DEVELOP Tech Paper↗
NASA NTRS2021

Invariant Funnels for Resonant Landing Orbits

We discovered a simple, two-part solution to the problem of finding resonant orbits to land on high latitudes of Ocean Worlds. First, we apply a standard planar Poincare ́ map in the spatial problem to identify a resonant landing orbit. Next we generate an ”invariant funnel” of trajectories that converge to the orbit, which acts as an attractor. The funnel has a wide mouth, thousands of kilometers wide, that shrinks to a small disc at a landing site only a few kilometers (or less) wide. These funnels are governed by ”resonant rings” of landing trajectories, and will make navigation more simple and robust.

Close, Sigrid↗
NASA NTRSDate not supplied

Comparing Satellite Measurements of Volcanic SO2 Mass from OMI, OMPS and TROPOMI

Sulfur dioxide (SO2) is a major air pollutant that contributes to acid rain and aerosol formation (e.g., sulfates), adversely affects the environment and human health, and explosive volcanic SO2 emissions can impact climate. The majority of SO2 emissions are related to anthropogenic processes (e.g., fossil fuel burning, metal ore smelting operations), although natural processes such as volcanic eruptions and degassing also play an important role as anthropogenic SO2 emissions continue to decline. Generally, the most interest in volcanoes occurs during major eruptions. We will focus on comparing volcanic SO2 outgassing that occurs on an almost daily basis from lesser known volcanoes using satellite data. At NASA’s Global Sulfur Dioxide Monitoring Home page (https://so2.gsfc.nasa.gov/), we have been posting daily SO2 maps from 40 volcanic and industrial regions around the world using measurements from three satellite instruments; the Ozone Monitoring Instrument (OMI) onboard NASA’s Earth Observing System Aura satellite, the Ozone Monitoring and Profiler Suite (OMPS) onboard the NASA-NOAA Suomi National Polar-orbiting Partnership (NPP) satellite, and the TROPOspheric Monitoring Instrument (TROPOMI) onboard the ESA/Copernicus Sentinel-5 Precursor satellite. These instruments in low Earth sun-synchronous polar orbits with 1:30-2:00 pm equator crossing local time provide daily SO2 maps at different spatial resolutions: 13 x 24 km2, 50 x 50 km2 and 5.5 x 3.5 km2 for OMI, OMPS and TROPOMI respectively. Data from OMI are available since October 2004 (partial coverage since 2008), from OMPS since 2012 and from TROPOMI since 2018. We will present comparative SO2 mass time-series (see Hunga-Tonga plot) and statistical analyses of recent eruptions that have data from all the instruments.

SO2↗
NASA NTRS2022

New Rover Conops with High-Performance Onboard Computing: Give Up Raw Data to Reduce Ops Cost and Do More Science

A major portion of time during the tactical operation of Mars rovers is spent for selecting, prioritizing, and coordinating sciences and engineering activities such that they fit within resource constraints, including the downlink data volume, energy, and time. In particular, the downlink data volume constraint is getting particularly tighter in recent missions because modern instruments produce increasingly high data volume while the communication bandwidth is essentially bounded by the law of physics. Tactical operation would be substantially simplified, hence the operation cost could be reduced, if the data volume constraint is relaxed or even removed. In this abstract, we propose a new operation paradigm for achieving this goal. The key observation is that, both in science and engineering applications, the bit size of raw data is typically much greater than the volume of processed information that is needed for scientific or engineering analysis. For example, a full-resolution image from Mastcam-Z, the main science camera on Perseverance, is about 700 kB in volume and we downlinked 29,685 images up to Sol 243, totaling ~20 GB of data. But of course, scientists do not use every pixel of these images; what they really look for in the images are geological features, typically represented by specific geometric configurations or textures. An end product after processing hundreds of Mascam-Z images could be a single geological map summarizing the spatial distribution of the features. For another example, a 100-meter drive of Perseverance produces 7-12 MB of drive telemetry, which records every detail of the rover's motion at 8 Hz, including position, attitude, steering angles, encoder readings, motor currents and many other information. But what the ground engineers eventually pay attention to is the signs of anomaly, such as excessive motor currents or high slip; if a drive is nominal, the vast majority of this data is unused. What if, then, we process the raw data onboard and only downlink the processed data that is relevant to scientific or engineering analyses, such as a list of detected science features (with cropped images) or a list of potential signs of anomaly while driving? A major roadblock for such onboard, high-level information processing has been the onboard computational resource. RAD750, the main onboard computer of Perseverance, is obviously not sufficient for performing complex image or signal processing such as object detection, semantic segmentation, or anomaly detection. Interestingly, RAD750 is not the best processor that Perseverance has; Qualcomm's Snapdragon 801, a modern mobile processor, is on her Heli Base Station, a device for communicating with Mars Helicopter Ingenuity; also, Intel's Atom E3845 processors are on engineering cameras. In the reminder of this paper, we will introduce two particular uses cases of these high-performance co-processors (meaning auxiliary CPU, GPU, or other types of processors that are separate from the main processor that runs the main flight software) for lowering operation cost and accommodating more science activities for a given communication constraint.

Didier, A.↗
NASA NTRS2024

High Precision and Spatial Resolution Chemical Interrogation of Planetary Materials Using fs-LA/LIBS in Tandem With Multi-Collector ICP-MS

Combining femtosecond laser ablation (fs-LA) with laser-induced breakdown spectroscopy (LIBS), together with multi-collector inductively coupled plasma mass spectrometry (MC-ICPMS), can provide remarkable insights into the composition, structure, and therefore geologic history of planetary materials and their terrestrial analogs. Using the Applied Spectra iX-fs-Tandem LA-LIBS Instrument and the Nu SP1700 MC-ICP-MS housed within the Center for Isotope Cosmochemistry and Geochronology at NASA Johnson Space Center, we present preliminary tandem fs-LA-(MC)-ICP-MS/LIBS measurements of planetary analog materials. The synergistic integration of fs-LA-LIBS offers high spatial resolution elemental mapping, enabling the identification of microscale variations within samples. Simultaneously, the MC-ICP-MS can deliver precise isotopic analyses, and integrating the two datasets yields a wealth of geochemical information for a given sample. LA-based chemical mapping experiment designs are contingent on the information sought (i.e., quantitative, or semi-quantitative) and the preferred or available volume of material removed for the analysis. For example, occasionally, there are significant limitations in the depth of ablation due to the sample value, the amount of material available, or simply the need to coordinate with other in-situ techniques. In these limited sample scenarios, the “depth-controlled” chemical maps allow for precise post-mapping ion-polishing of the sample, while the isotopic and elemental maps can be used for targeting future analyses (e.g., conventional LA analyses, SIMS analyses, and micro milling for solution ICP-MS/TIMS). The emerging methodology will establish a powerful tool for investigation of astromaterials and materials returned by future planetary sample science missions.

Jacob B Setera↗
DOE OSTI2022

MEASUREMENT OF THE GENERALIZED POLARIZABILITIES OF THE PROTON IN VIRTUAL COMPTON SCATTERING

Understanding how the visible matter in the universe arises from its elementary quark and gluon constituents is a central question for science. The visible world is founded on the proton, the only composite building block of matter that is stable in nature. Consequently, understanding the formation of matter relies on explaining the dynamics and the properties of the proton?s bound state. A fundamental property of the proton involves the system?s response to an external electromagnetic (EM) field. It is characterized by the EM polarizabilities that describe how easily the charge and magnetization distributions inside the system are distorted by the EM field. When the polarizabilities are generalized to finite momentum transfer, their Fourier transform can map out the spatial distribution of the polarization densities in a proton subject to an EM field. This thesis focuses on the measurement of the proton generalized polarizabilities (GPs) at low four-momentum transfer in experimental Hall C at the Thomas Jefferson National Accelerator Facility (TJNAF). Among the six independent GPs, we will focus on the electric (aE1) and the magnetic (bM1) scalar GPs. The GPs can be accessed through measurements of the Virtual Compton Scattering reaction, by replacing the incoming real photon of the Compton scattering process with a space-like virtual photon. The outgoing real photon provides the EM perturbation to the system. In addition, the Dispersion Relation Formalism is used for generalized polarizability extraction. In this work, the two scalar GPs measured with unprecedented precision, and the measurements help explore a momentum transfer region where an anomalous enhancement of the electric GP that contradicts the predictions of nuclear theory has been observed.

Li, Ruonan↗
DOE OSTI2023

Building Alternative Indices of Socioeconomic Status for Population Modeling in Data-Sparse Contexts (Short Paper)

Population modeling requires clear definitions of socioeconomic status (SES) to ensure overall estimate accuracy and locate potentially underserved subpopulations. This presents a challenge as SES can be measured in myriad ways and for divergent purposes, and the data required to calculate these metrics may be lacking, particularly in low and middle income countries (LMICs). To support more refined SES measurement, we explore improvements upon the Demographic and Health Survey’s (DHS) Wealth Index (DHS-WI) using alternative characterizations of SES based on multiple correspondence analysis (MCA) and hierarchical clustering. We produce the MCA-derived metrics first on a full suite of household economic, demographic, and dwelling variables, then on a reduced set of occupant-only SES characteristics. We explore the utility of these metrics relative to DHS-WI based on their ability to 1) differentiate DHS household types and 2) identify mixtures of SES levels within DHS samples and mapped at high spatial resolution. We find that our full suite MCA yields more clearly defined SES segments and that our reduced MCA delineates occupant SES most clearly, suggesting potential pathways to improve upon the DHS-WI in future population modeling efforts for LMICs.

Cunningham, Angela↗
NASA NTRS1982

Magnetic structure of a flaring region producing impulsive microwave and hard X-ray bursts

Using VLA observations of the 1B/M1 flare of June 25, 1980, 6-cm 'snapshot' maps are synthesized. The spatial and temporal resolutions during the 9 minutes of the impulsive phase were, respectively, 1 arcsec x 2 arcsec and 10 s. Some displacement is noted between the locations of the burst source and the preflare loop structures seen in the preflare map. The burst peak occurred on the neutral line of the preflare polarization map, between the two oppositely polarized microwave 'loop' structures approximately 40 arcsec long. Concurrent hard X-ray observations were made of the burst, although these had no spatial resolution. The 6-cm maps show the locations of a number of the X-ray burst spikes. The 6-cm burst was fully resolved into at least eight components, many of which were bipolar.

Kundu, M. R.↗
NASA NTRS2012

Mapping Impervious Surface Expansion using Medium-resolution Satellite Image Time Series: A Case Study in the Yangtze River Delta, China

Cities have been expanding rapidly worldwide, especially over the past few decades. Mapping the dynamic expansion of impervious surface in both space and time is essential for an improved understanding of the urbanization process, land-cover and land-use change, and their impacts on the environment. Landsat and other medium-resolution satellites provide the necessary spatial details and temporal frequency for mapping impervious surface expansion over the past four decades. Since the US Geological Survey opened the historical record of the Landsat image archive for free access in 2008, the decades-old bottleneck of data limitation has gone. Remote-sensing scientists are now rich with data, and the challenge is how to make best use of this precious resource. In this article, we develop an efficient algorithm to map the continuous expansion of impervious surface using a time series of four decades of medium-resolution satellite images. The algorithm is based on a supervised classification of the time-series image stack using a decision tree. Each imerpervious class represents urbanization starting in a different image. The algorithm also allows us to remove inconsistent training samples because impervious expansion is not reversible during the study period. The objective is to extract a time series of complete and consistent impervious surface maps from a corresponding times series of images collected from multiple sensors, and with a minimal amount of image preprocessing effort. The approach was tested in the lower Yangtze River Delta region, one of the fastest urban growth areas in China. Results from nearly four decades of medium-resolution satellite data from the Landsat Multispectral Scanner (MSS), Thematic Mapper (TM), Enhanced Thematic Mapper plus (ETM+) and China-Brazil Earth Resources Satellite (CBERS) show a consistent urbanization process that is consistent with economic development plans and policies. The time-series impervious spatial extent maps derived from this study agree well with an existing urban extent polygon data set that was previously developed independently. The overall mapping accuracy was estimated at about 92.5% with 3% commission error and 12% omission error for the impervious type from all images regardless of image quality and initial spatial resolution.

Gao, Feng↗
DOE OSTI2023

Stellar-reddening-based Extinction Maps for Cosmological Applications

Cosmological surveys must correct their observations for the reddening of extragalactic objects by Galactic dust. Existing dust maps, however, have been found to have spatial correlations with the large-scale structure of the Universe. Errors in extinction maps can propagate systematic biases into samples of dereddened extragalactic objects and into cosmological measurements such as correlation functions between foreground lenses and background objects and the primordial non-Gaussianity parameter f NL . Emission-based maps are contaminated by the cosmic infrared background, while maps inferred from stellar reddenings suffer from imperfect removal of quasars and galaxies from stellar catalogs. Thus, stellar-reddening-based maps using catalogs without extragalactic objects offer a promising path to making dust maps with minimal correlations with large-scale structure. We present two high-latitude integrated extinction maps based on stellar reddenings, with a point-spread functions of FWHMs 6'. 1 and 15'. We employ a strict selection of catalog objects to filter out galaxies and quasars and measure the spatial correlation of our extinction maps with extragalactic structure. Our galactic extinction maps have reduced spatial correlation with large-scale structure relative to most existing stellar-reddening-based and emission-based extinction maps.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2020

Monitoring Water-Related Ecosystems with Earth Observation Data in Support of Sustainable Development Goal (SDG) 6 Reporting

Lack of national data on water-related ecosystems is a major challenge to achieving the Sustainable Development Goal (SDG) 6 targets by 2030. Monitoring surface water extent, wetlands, and water quality from space can be an important asset for many countries in support of SDG 6 reporting. We demonstrate the potential for Earth observation (EO) data to support country reporting for SDG Indicator 6.6.1, ‘Change in the extent of water-related ecosystems over time’ and identify important considerations for countries using these data for SDG reporting. The spatial extent of water-related ecosystems, and the partial quality of water within these ecosystems is investigated for seven countries. Data from the Moderate Resolution Imaging Spectroradiometer (MODIS) and Landsat 5, 7, and 8 with Shuttle Radar Topography Mission (SRTM) are used to measure surface water extent at 250 m and 30 m spatial resolution, respectively, in Cambodia, Jamaica, Peru, the Philippines, Senegal, Uganda, and Zambia. The extent of mangroves is mapped at 30 m spatial resolution using Landsat 8 Operational Land Imager (OLI), Sentinel-1, and SRTM data for Jamaica, Peru, and Senegal. Using Landsat 8 and Sentinel 2A imagery, total suspended solids and chlorophyll-a are mapped over time for a select number of large surface water bodies in Peru, Senegal, and Zambia. All of the EO datasets used are of global coverage and publicly available at no cost. The temporal consistency and long time-series of many of the datasets enable replicability over time, making reporting of change from baseline values consistent and systematic. We find that statistical comparisons between different surface water data products can help provide some degree of confidence for countries during their validation process and highlight the need for accuracy assessments when using EO-based land change data for SDG reporting. We also raise concern that EO data in the context of SDG Indicator 6.6.1 reporting may be more challenging for some countries, such as small island nations, than others to use in assessing the extent of water-related ecosystems due to scale limitations and climate variability. Country-driven validation of the EO data products remains a priority to ensure successful data integration in support of SDG Indicator 6.6.1 reporting. Multi-country studies such as this one can be valuable tools for helping to guide the evolution of SDG monitoring methodologies and provide a useful resource for countries reporting on water-related ecosystems. The EO data analyses and statistical methods used in this study can be easily replicated for country-driven validation of EO data products in the future.

water-related ecosystems; surface water extent; ma↗
NASA NTRS2020

Monitoring Water-Related Ecosystems with Earth Observation Data in Support of Sustainable Development Goal (SDG) 6 Reporting

Lack of national data on water-related ecosystems is a major challenge to achieving the Sustainable Development Goal (SDG) 6 targets by 2030. Monitoring surface water extent, wetlands, and water quality from space can be an important asset for many countries in support of SDG 6reporting. We demonstrate the potential for Earth observation (EO) data to support country reporting for SDG Indicator 6.6.1, ‘Change in the extent of water-related ecosystems over time’ and identify important considerations for countries using these data for SDG reporting. The spatial extent of water-related ecosystems, and the partial quality of water within these ecosystems is investigated for seven countries. Data from the Moderate Resolution Imaging Spectroradiometer (MODIS) and Landsat 5, 7, and 8 with Shuttle Radar Topography Mission (SRTM) are used to measure surface water extent at 250 m and 30 m spatial resolution, respectively, in Cambodia, Jamaica, Peru, the Philippines, Senegal, Uganda, and Zambia. The extent of mangroves is mapped at 30 m spatial resolution using Landsat 8 Operational Land Imager (OLI), Sentinel-1, and SRTM data for Jamaica, Peru, and Senegal. Using Landsat 8 and Sentinel 2A imagery, total suspended solids and chlorophyll-a are mapped overtime for a select number of large surface water bodies in Peru, Senegal, and Zambia. All of the EO datasets used are of global coverage and publicly available at no cost. The temporal consistency and long time-series of many of the datasets enable replicability over time, making reporting of change from baseline values consistent and systematic. We find that statistical comparisons between different surface water data products can help provide some degree of confidence for countries during their validation process and highlight the need for accuracy assessments when using EO-based land change data for SDG reporting. We also raise concern that EO data in the context of SDG Indicator 6.6.1reporting may be more challenging for some countries, such as small island nations, than others to use in assessing the extent of water-related ecosystems due to scale limitations and climate variability. Country-driven validation of the EO data products remains a priority to ensure successful data integration in support of SDG Indicator 6.6.1 reporting. Multi-country studies such as this one can be valuable tools for helping to guide the evolution of SDG monitoring methodologies and provide a useful resource for countries reporting on water-related ecosystems. The EO data analyses and statistical methods used in this study can be easily replicated for country-driven validation of EO data products in the future.

Raha Hakimdavar↗
NASA NTRS1992

An overview of the Cosmic Background Explorer (COBE) and its observations - New sky maps of the early universe

This paper discusses the three instruments aboard NASA's Cosmic Background Explorer (COBE) satellite and presents early results obtained from the first six months of observations. The three instruments (FIRAS, DMR, and DIRBE) have operated well and produced significant new results. The FIRAS measurement of the CMB spectrum supports the standard Big Bang model. The maps made from the DMR instrument measurements show a spatially smooth early universe. The maps of galactic and zodiacal emission produced by the DIRBE instrument are needed to identify the foreground emissions from extragalactic and thus to interpret its and the other COBE results in terms of events in the early universe.

Smoot, George F.↗
NASA NTRS1990

A modified objective mapping technique for scatterometer wind data

A method for generating high-resolution wind maps from scatterometer data was developed and tested on synthetic data for the northeast Pacific Ocean. It is shown that, unlike the wind fields generated by current GCMs, the wind maps constructed by this method retain the high spatial resolution of the scatterometer wherever adequate measurements exist. For the NASA scatterometer, this method would produce every 12 hours a wind map with spatial resolution that preserves the small-scale features of the original data over about half the mapped region. Over the rest of the region, maps with somewhat lower resolution and accuracy will be obtained.

Kelly, Kathryn A.↗
NASA NTRS2003

Applications of Sea-Ice Motion and Deformation Derived from Satellite Data

QuikSCAT backscatter, AMSR and DMSP SSM/I radiance data have been used to derive sea ice motion for both the Arctic and Antarctic region using the wavelet analysis tracking method. All results from QuikSCAT, AMSR and SSM5 are compatible with buoys and can then be merged by data fusion method to generate composite sea ice motion maps for more complete coverage. Furthermore, based on this merged data set daily sea-ice deformation (shear, and convergence) maps have been produced and show consistent spatial and temporal patterns. Temporal correlation maps between ice deformation and SSM/II ice concentration show interesting results in the Arctic, especially the coast area. In this study, principal component analysis for both the merged ice tracking result from satellite data and pressure field from buoy have also been examined for the relationship between the principal components and eigenvectors from these two data sets. While the result shows that principal components of modes 1 and 2 from two data sets are highly correlated which confirms that wind forcing is a major factor driving the ice drift, it also reveals that other high energy modes are not highly correlated which maybe caused by coastal effects. Principal component analysis of Arctic sea-ice motion during fall/winter period in different years shows the reverse of dominant modes or patterns is related to the Arctic Oscillation.

Liu, Antony K.↗