Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Measurements of extreme-ultraviolet emission-line profiles near the solar limb

Line profiles of optically thin extreme-ultraviolet emission lines observed in a quiet sun region at positions within and above the white-light limb with the NRL slit spectrograph (S082-B) on Skylab are discussed. Absolute line intensities and full widths at half-maximum are presented for lines formed over the temperature range from about 10,000 to 22,000 K. The line intensities are compared with the predictions of simple atmospheric models consisting of a spicule component and a thin spherically symmetric or network models, but can be explained by assuming that the emission arises from spicule-like inhomogeneities. Random mass-motion velocities are calculated. The velocity increases with increasing temperature of line formation. Near the limb and above about 4000 K the calculated velocity is consistent with the predictions of a constant acoustic flux passing through the transition zone. For the ions formed at temperatures not less than about 63,000 K, the velocity is found to increase with increasing height above the white-light limb.

Mariska, J. T.↗

The EUV continuum emission /1400-1960 A/ in a solar flare observed from Skylab

The total radiative output in the EUV continuum (1400-1960 A) from the 5 September 1973 flare has been obtained from the EUV spectra of the flare observed with the NRL slit spectrograph (SO82B) on Skylab. The radiative energy in the EUV continuum is of the order of 10 to the 29th ergs, which is more than a factor of 2 greater than those radiated in soft X-rays (8-20 A) and in H-alpha for the flare. Thus, the EUV continuum emission is an important radiative energy loss, and should be included in the consideration of the energy balance of the flare.

Cheng, C.-C.↗

The height variation of supergranular velocity fields determined from simultaneous OSO 8 satellite and ground-based observations

Results are reported for simultaneous satellite and ground-based observations of supergranular velocities in the sun, which were made using a UV spectrometer aboard OSO 8 and a diode-array instrument operating at the exit slit of an echelle spectrograph attached to a vacuum tower telescope. Observations of the steady Doppler velocities seen toward the limb in the middle chromosphere and the photosphere are compared; the observed spectral lines of Si II at 1817 A and Fe I at 5576 A are found to differ in height of formation by about 1400 km. The results show that supergranular motions are able to penetrate at least 11 density scale heights into the middle chromosphere, that the patterns of motion correlate well with the cellular structure seen in the photosphere, and that the motion increases from about 800 m/s in the photosphere to at least 3000 m/s in the middle chromosphere. These observations imply that supergranular velocities should be evident in the transition region and that strong horizontal shear layers in supergranulation should produce turbulence and internal gravity waves.

November, L. J.↗

Ultraviolet astronomy instrumentation for sounding rocket and Shuttle/Spacelab missions

The paper deals with an electrographic Schmidt camera for wide-field imaging and objective-spectrographic sky surveys, and with a nebula spectrograph designed to obtain slit spectra of nebulae and other diffuse sources. Each of these ultraviolet astronomy instruments has been successfully used in sounding rocket flights. It is seen that, with some minor modifications, both instruments should be readily adaptable to Spacelab missions.

Carruthers, G. R.↗

The fracture behavior of graphite/epoxy laminates

The results of uniaxial tensile tests conducted on a variety of graphite/epoxy laminates containing narrow rectangular slits and square or circular holes with various aspect ratios are discussed. The techniques used to study stable-crack or damage-zone growth - namely, birefringence coatings, COD gages, and microscopic observations are discussed. Initial and final-fracture modes are discussed as well as the effect of notch size and shape and laminate type on the fracture process. Characteristic lengths are calculated using the point, average and inherent flaw theories and comparisons with observations are discussed. Further, the effect of flaw geometry on stress states and deformations is assessed.

Yeow, Y. T.↗

Effects of diffraction in multiple-grid telescopes for X-ray astronomy

Diffraction effects in modern designs for grid collimator telescopes (assumed to have roughly a 100-micron grid period) are apparent at wavelengths longer than 1 A and are dominant at wavelengths longer than 10 A. In collimators with many grids spaced far apart the effects of diffracation are to reduce strongly the peak transmission of the collimator at longer wavelengths and to broaden it by about the amount expected from Fraunhofer diffraction through a slit the size of the grid openings. Comparisons between two-collimator measurements and the present calculations show reasonable agreement; it is therefore concluded that the present single-collimator calculation gives a good representation of their diffraction-limited angular response.

Lindsey, C. A.↗

Solar C III line intensity ratios observed from Skylab

Solar observations of C III line intensity ratios are analyzed which were obtained by the Naval Research Laboratory extreme-ultraviolet slit spectrograph on Skylab from quiet and active regions, coronal holes, prominences, and a flare. Electron densities are determined by comparing the observed intensity ratios to their theoretical variation as a function of electron density and temperature. Both isothermal line ratios that are evaluated at a characteristic emitting temperature and ratios that are integrated through the temperature and density structure of a model solar atmosphere are calculated. The density-sensitive ratios R(Si IV 1402/C III 1908) and R(Si III 1892/C III 1908) are also used to derive additional values of electron density. It is found that the ratios R(C III 1247/C III 1908), R(Si IV 1402/C III 1908), and R(Si III 1892/C III 1908) give consistent values of electron density for each feature. The C III 1908-A, Si III 1892-A, and Si IV 1402-A lines have recently been observed from the IUE satellite in spectra of late-type stars, and can serve as practical density diagnostics that are independent of assumptions about the stellar surface gravity.

Cook, J. W.↗

Uranus - Narrow-waveband disk profiles in the spectral region 6000 to 8500 Angstroms

New narrow-band (100 A) photoelectric slit scan photometry of Uranus has been obtained in the spectral region 6000 to 8500 A. Coarse radial intensity profiles in seven wavebands are presented. Results of the investigation confirm earlier studies of limb brightening on the Uranus disk, but not all strong CH4 absorption bands are found to exhibit limb brightening. Specifically, the CH4 bands at 8000 and 8500 A show pronounced apparent limb darkening. Polar brightening may be responsible for the phenomenon. If so, an aerosol haze with a local optical thickness of approximately 0.5 or greater would be required. Visibility of the dense cloud layer located deep in the atmosphere might also cause apparent limb darkening. If so, the maximum permitted CH4/H2 mixing ratio in the visible atmosphere would correspond to 3 times the solar value.

Price, M. J.↗

CODSTRAN - Composite durability structural analysis

CODSTRAN (COmposite Durability STRucture ANalysis) a NASA Lewis Center computer program for the prediction of defect growth and fracture of composite structures when subjected to service loads is presented. Organization, capabilities and present status are discussed. Organizational aspects include executive, input, output, analysis and composite mechanics modules. Capabilities include: durability assessment of large structures and complex structural parts from composites, structural response due to static, cyclic, transient impact and thermal loads, and criteria for static, cyclic, and dynamic fracture. At the present state of development some of CODSTRAN's analysis capabilities include composite mechanics, static failures, and lamination residual stresses. An application in which CODSTRAN is used to predict the defect growth in a flat specimen, with a center through-slit under tension is studied. When completed, CODSTRAN will account for geometry and material nonlinearities, environmental effects as well as static, cyclic and dynamic fracture.

Chamis, C. C.↗

Uranus - Disk structure within the 7300-A methane band

Orthogonal narrow-band (100 A) photoelectric slit scan photometry of Uranus has been used to infer the basic two-dimensional structure of the disk within the 7300-A methane band. Numerical image reconstruction and restoration techniques have been applied to quantitatively estimate the degrees of polar and limb brightening on the planet. Through partial removal of atmospheric smearing, an effective spatial resolution of approximately 0.9 arcsec has been achieved. Peak polar, limb, and central intensities on the disk are in the respective proportions 3:2:1. In addition, the bright polar feature is displaced from the geometric pole towards the equator of the planet.

Price, M. J.↗

Method for decomposing observed line shapes resulting from multiple causes - Application to plasma charge-exchange-neutral spectra

A method is given for decomposing the widths of observed spectral lines resulting from unresolved line splitting, additive kinetic processes of different types, instrumental broadening (slit function), Doppler broadening, etc. all superimposed. The second moments are used as measures of the various widths involved. The method is not applicable if dispersion type (Lorentz) broadening occurs. Application is made to plasma charge-exchange-neutral spectra of hydrogen, deuterium, and helium.

Patch, R. W.↗

Burning characteristics and fiber retention of graphite/resin matrix composites

Graphite fiber reinforced resin matrix composites were subjected to controlled burning conditions to determine their burning characteristics and fiber retention properties. Small samples were burned with a natural gas fired torch to study the effects of fiber orientation and structural flaws such as holes and slits that were machined into the laminates. Larger laminate samples were burned in a modified heat release rate calorimeter. Unidirectional epoxy/graphite and polyimide/graphite composites and boron powder filled samples of each of the two composite systems were burn tested. The composites were exposed to a thermal radiation of 5.3 Btu/sq ft-sec in air. Samples of each of the unfilled composite were decomposed anaerobically in the calorimeter. Weight loss data were recorded for burning and decomposition times up to thirty-five minutes. The effects of fiber orientation, flaws, and boron filler additives to the resins were evaluated. A high char forming polyimide resin was no more effective in retaining graphite fibers than a low char forming epoxy resin when burned in air. Boron powder additions to both the polyimide and the epoxy resins stabilized the chars and effectively controlled the fiber release.

Bowles, K. J.↗

A solar extreme ultraviolet telescope and spectrograph for space shuttle. Volume 1: Investigation and technical plan

A scientific investigation of heating and mass transport in the solar corona that is currently planned for a future Shuttle/Spacelab flight is outlined. The instrument to be used is a near-normal incidence grating spectrograph fed by a grazing incidence Wolter Type 2 telescope. A toroidal grating design provides stigmatic images of the corona up to 8 arc min in extent over the spectral region from 225 A to 370 A. Spatial resolution of at least 2 arc sec and spectral resolution of 0.050 A is achievable throughout the central 4 arc min field or view. Primary scientific data are recorded on Schumann-type film. An H-alpha slit jaw monitor and zero order extreme ultraviolet monitor are also planned to support instrument operation.

Neupert, W. M.↗

Spectrum synthesis of EUV solar flare line profiles

A classic double ribbon flare of importance 1B occurred at approximately 1405 UT on June 15, 1973, reached an H alpha maximum at 1413 UT, and ended at 1455 UT. The flare occurred in an old and simplifying bipolar region at N18 W32. This flare was studied due to the extensive temporal data available. A total of 136 spectra of wavelength ranges from 1100 to 3000 A were taken during the flare's duration by the Naval Research Laboratory normal incidence slit spectrograph. Using this data the nature of the solar chromosphere of a flare event as a function of time was determined.

Tripp, D. A.↗

Solar maximum ultraviolet spectrometer and polarimeter

The objectives of the UVSP experiment are to study solar ultraviolet radiations, particularly from flares and active regions, and to measure constituents in the terrestrial atmosphere by the extinction of sunlight at satellite dawn and dusk. The instrument is designed to observe the Sun at a variety of spectral and spatial resolutions in the range from 1150 to 3600 A. A Gregorian telescope with effective focal length of 1.8 m is used to feed a 1 m Ebert-Fastie spectrometer. A polarimeter containing rotatable magnesium fluoride waveplates is included behind the spectrometer entrance slit and will allow all four Stokes parameters to be determined. Velocities on the Sun can also be measured. The instrument is controlled by a computer which can interact with the data stream to modify the observing program. The observing modes, including rasters, spectral scans, velocity measurements, and polarimetry, are also described along with plans for mission operations, data handling, and analysis of the observations.

Tandberg-Hanssen, E.↗

Paraboloidal X-ray telescope mirror for solar coronal spectroscopy

The telescope mirror for the X-ray Spectrograph Spectrometer Telescope System is a sixty degree sector of an extreme off-axis paraboloid of revolution. It was designed to focus a coronal region 1 by 10 arc seconds in size on the entrance slit of the spectrometer after reflection from the gold surface. This paper discusses the design, manufacture, and metrology of the mirror, the methods of precision mechanical metrology used to focus the system, and the mounting system which locates the mirror and has proven itself through vibration tests. In addition, the results of reflection efficiency measurements, alignment tolerances, and ray trace analysis of the effects of misalignment are considered.

Brown, W. A.↗

Lensless scanning telescope

A lensless scanning telescope composed of two circular apertures and having good response with minimum aliasing is described. By analogy with an arrangement of two slits, the modulation transfer function (MTF) of this telescope is derived. The MTF of a lensless telescope scanning the earth's surface from 500-km orbit is developed for both the scan and cross-scan directions. Response of 48% or better at 100-km wavelength in both directions is shown with aliasing errors due to sampling of 1% or less.

Edwards, H. B.↗

Densities and mass motions in transition-zone plasmas in solar flares observed from Skylab

The electron densities and bulk motions in the transition-zone plasma of a solar flare are investigated by an analysis of EUV emission line spectra taken on Skylab. Spectra of three flares were obtained with the NRL normal incidence grating slit spectrograph in the ranges 1100-1940 and 1940-3940 A. The line ratios of transition-zone Si III lines and the intensity of the forbidden O IV 1401-A lines during flare maximum indicate electron densities on the order of 10 to the 12th/cu cm, decreasing by a factor of 2 to 3 in the flare decay phase. Line broadening of the transition-zone ions such as Si III, O IV, C IV and N V is noted, and the observed asymmetrical N V line profiles are approximated by a bi-Gaussian model of a stationary and a moving plasma component with a bulk velocity of 12 to 70 km/sec. Turbulent velocities of from 45 to 85 km/sec and from 20 to 40 km/sec are also indicated for the moving and stationary components of the transition-zone plasma, respectively.

Cheng, C.-C.↗