Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “simulation code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Mesoscale Simulations of a Wind Ramping Event for Wind Energy Prediction

Ramping events, or rapid changes of wind speed and wind direction over a short period of time, present challenges to power grid operators in regions with significant penetrations of wind energy in the power grid portfolio. Improved predictions of wind power availability require adequate predictions of the timing of ramping events. For the ramping event investigated here, the Weather Research and Forecasting (WRF) model was run at three horizontal resolutions in 'mesoscale' mode: 8100m, 2700m, and 900m. Two Planetary Boundary Layer (PBL) schemes, the Yonsei University (YSU) and Mellor-Yamada-Janjic (MYJ) schemes, were run at each resolution as well. Simulations were not 'tuned' with nuanced choices of vertical resolution or tuning parameters so that these simulations may be considered 'out-of-the-box' tests of a numerical weather prediction code. Simulations are compared with sodar observations during a wind ramping event at a 'West Coast North America' wind farm. Despite differences in the boundary-layer schemes, no significant differences were observed in the abilities of the schemes to capture the timing of the ramping event. As collaborators have identified, the boundary conditions of these simulations probably dominate the physics of the simulations. They suggest that future investigations into characterization of ramping events employ ensembles of simulations, and that the ensembles include variations of boundary conditions. Furthermore, the failure of these simulations to capture not only the timing of the ramping event but the shape of the wind profile during the ramping event (regardless of its timing) indicates that the set-up and execution of such simulations for wind power forecasting requires skill and tuning of the simulations for a specific site.

17 WIND ENERGY↗

Performance tuning of CEED software and 1st and 2nd wave apps

The goal of this milestone was the performance tuning of the CEED software, as well as the use and tuning of CEED to accelerate the first and second wave of targeted ECP applications. In this milestone, the CEED team developed optimization techniques and tuned for performance the CEED software to accelerate the first and second wave target ECP applications. Specifically, the focus was on the following: (1) Efficient use of the memory sub-system for managing data motion and interactions among different physics packages and libraries; this included integration of the new developments in a libCEED 0.5 software release; (2) Enhancing the CEED libraries with GPU and AMD GPU support in close interaction with vendors; (3) Optimal data locality and motion, and enhanced scalability and parallelism; this included vendors interactions for improvements in data motion and making strong scaling easier and more efficient; and (4) Continue boosting performance for the first-wave and second-wave of ECP target applications, including ExaSMR, ExaWind, Urban, MARBL, E3SM, and ExaAM. A main part of this milestone was the performance tuning of the CEED first-wave and second-wave ECP applications. This included the ExaSMR application – Coupled Monte Carlo Neutronics and Fluid Flow Simulation of Small Modular Reactors (ORNL), the MARBL application – Next-Gen Multi-physics Simulation Code (LLNL), and the ExaAM ExaConstit – a miniapp for the Transforming Additive Manufacturing through Exascale Simulation applications project (ExaAM), as well as ExaWind, Urban, and E3SM. The artifacts delivered include performance improvements in CEED’s 1st and 2nd wave of applications, and tuned CEED software for various architectures through a number of backends, freely available in the CEED’s repository on GitHub. See the CEED website, http://ceed.exascaleproject.org and the CEED GitHub organization, http://github.com/ceed for more details. In addition to details and results from the above R&D efforts, in this document we are also reporting on other project-wide activities performed in Q4 of FY19 including: CEED’s third annual meeting, MFEM GPU kernels scaling improvements, libCEED 0.5 and NekRS releases, an overview paper covering latest results on a set of bake-off high-order finite element problems (BPs), and other outreach efforts.

97 MATHEMATICS AND COMPUTING↗

Towards Exascale Astrophysics of Mergers and Supernovae (TEAMS)

The major goals of the TEAMS project are (i) to improve the modeling of many of the suggested astrophysical sites of the r‐process, as well as some potential p‐process sites, (ii) to use our models to support and guide the experimental efforts at FRIB and similar facilities, and (iii) to use our tools to cement our understanding of the roles that massive stars play in galactic chemical evolution. As part of the TEAMS project, Mezzacappa (UTK, Reddy (UW), Surman (ND), and Steiner (UTK) are (i) generating equations of state and neutrino opacities for simulations of core‐collapse supernovae and neutron star mergers which are more faithful to current understanding of the nucleon‐nucleon interaction, (ii) integrating those new equations of state and neutrino opacities into new simulation codes being developed, (iii) performing detailed nuclear reaction network post‐processing to determine abundances from simulations and (iv) quantifying the impact of nuclear physics uncertainties on r‐process abundances.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

RAVEN, a New Software for Dynamic Risk Analysis

RAVEN is a generic software driver to perform parametric and probabilistic analysis of code simulating complex systems. Initially developed to provide dynamic risk analysis capabilities to the RELAP-7 code [1] is currently being generalized with the addition of Application Programming Interfaces (APIs). These interfaces are used to extend RAVEN capabilities to any software as long as all the parameters that need to be perturbed are accessible by inputs files or directly via python interfaces. RAVEN is capable to investigate the system response probing the input space using Monte Carlo, grid strategies, or Latin Hyper Cube schemes, but its strength is its focus toward system feature discovery like limit surfaces separating regions of the input space leading to system failure using dynamic supervised learning techniques. The paper will present an overview of the software capabilities and their implementation schemes followed by same application examples.

97 MATHEMATICS AND COMPUTING↗

Mesh generation for confined fusion plasma simulation

XGC1 and M3D-C 1 are two fusion plasma simulation codes being developed at Princeton Plasma Physics Laboratory. XGC1 uses the particle-in-cell method to simulate gyrokinetic neoclassical physics and turbulence. M3D-C 1 solves the two-fluid resistive magnetohydrodynamic equations with the C 1 finite elements. This paper presents the software tools and libraries that were combined to form the geometry and automatic meshing procedures for these codes. Finally, specific consideration has been given to satisfy the mesh configuration and element shape quality constraints of XGC1 and M3D-C 1 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of applied magnetic field magnetoplasmadynamic thrusters with particle-in-cell code with Monte Carlo collision. I. Computation methods and physical processes

A two-dimensional axisymmetric electromagnetic particle-in-cell code with Monte Carlo collision conditions has been developed for an applied-field magnetoplasmadynamic thruster simulation. This theoretical approach establishes a particle acceleration model to investigate the microscopic and macroscopic characteristics of particles. This new simulation code was used to study the physical processes associated with applied magnetic fields. In this paper (I), detail of the computation procedure and results of predictions of local plasma and field properties are presented. The numerical model was applied to the configuration of a NASA Lewis Research Center 100-kW magnetoplasmadynamic thruster which has well documented experimental results. The applied magnetic field strength was varied from 0 to 0.12 T, and the effects on thrust were calculated as a basis for verification of the theoretical approach. With this confirmation, the changes in the distributions of ion density, velocity, and temperature throughout the acceleration region related to the applied magnetic fields were investigated. Using these results, the effects of applied field on physical processes in the thruster discharge region could be represented in detail, and those results are reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-consistent simulation of transport and turbulence in tokamak edge plasma by coupling SOLPS-ITER and BOUT++

The status of coupling the fluid plasma/neutral 2D transport code SOLPS-ITER and the fluid 3D turbulence code BOUT++ is reported. Both codes simulated the same region, which is from several cm inside the magnetic separatrix to the far scrape-off layer (SOL). Compared to the profile evolution time scale, the characteristic time scale of the turbulence is quite short. For the turbulence code BOUT++, the time scale is around 10 -6 s. However, for the transport code SOLPS-ITER, the time scale is around 10 -3 –10 -2 s. An iterative scheme is used that each system is evolved on its own characteristic time scale. SOLPS-ITER can provide the background profiles of density, ion, and electron temperature to BOUT++. In turn, BOUT++ can provide the corresponding radial transport coefficients to SOLPS-ITER. The coupling has involved the ion density, ion temperature, and electron temperature. After several steps of iteration, the profiles of density, ion, and electron temperature show fluctuations, and the differences of the changes between two consecutive profiles are getting smaller and smaller. Finally, the self-consistent solutions of turbulence and transport can be obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Linear gyrokinetic simulation of high-n toroidal Alfven eigenmodes in a burning plasma

A hybrid gyrokinetic ions/massless fluid electron model is used to study the stability of high-n toroidal Alfven eigenmodes (TAEs) in ITER [M. Shimada et al., Nucl. Fusion 47, S1 (2007)]. The hybrid model has been implemented in the particle-in-cell turbulence simulation code GEM [Y. Chen and S. E. Parker, J. Comput. Phys. 220, 839 (2007)]. The adequacy of the hybrid model for simulating TAEs has been previously demonstrated [J. Lang et al., Phys. Plasmas 16, 102101 (2009)] by comparing the simulated TAE mode frequency and structure with an eigenmode analysis, and the thermal ion kinetic damping effect with analytic theory. By using a global particle-in-cell code the effects of large orbit width and nonlocal mode structures can be accurately included. Damping rate due to numerical filtering is carefully monitored, and convergence with respect to particle number, grid resolution, etc., is thoroughly tested. The simulations show that the most unstable modes in ITER lie in the rage of 10<n<20. Thermal ion pressure effect and alpha particle nonperturbative effect are important in determining the mode radial location and stability threshold. The thermal ion Landau damping rate and radiative damping rate from the simulations are compared with analytical estimates. The thermal ion Landau damping is the dominant damping mechanism. Plasma elongation has a strong stabilizing effect on the alpha driven TAEs. The central alpha particle pressure threshold for the most unstable n=15 mode is about {beta}{sub {alpha}(0)}=0.7% for the fully shaped ITER equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation study of wakefield generation by two color laser pulses propagating in homogeneous plasma

This paper deals with a two-dimensional simulation of electric wakefields generated by two color laser pulses propagating in homogeneous plasma, using VORPAL simulation code. The laser pulses are assumed to have a frequency difference equal to the plasma frequency. Simulation studies are performed for two similarly as well as oppositely polarized laser pulses and the respective amplitudes of the generated longitudinal wakefields for the two cases are compared. Enhancement of wake amplitude for the latter case is reported. This simulation study validates the analytical results presented by Jha et al.[Phys. Plasmas 20, 053102 (2013)].

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CASL VMA FY16 Milestone Report (L3:VMA.VUQ.P13.07) Westinghouse Mixing with COBRA-TF

COBRA-TF (CTF) is a low-resolution code currently maintained as CASL's subchannel analysis tool. CTF operates as a two-phase, compressible code over a mesh comprised of subchannels and axial discretized nodes. In part because CTF is a low-resolution code, simulation run time is not computationally expensive, only on the order of minutes. Hi-resolution codes such as STAR-CCM+ can be used to train lower-fidelity codes such as CTF. Unlike STAR-CCM+, CTF has no turbulence model, only a two-phase turbulent mixing coefficient, β. β can be set to a constant value or calculated in terms of Reynolds number using an empirical correlation. Results from STAR-CCM+ can be used to inform the appropriate value of β. Once β is calibrated, CTF runs can be an inexpensive alternative to costly STAR-CCM+ runs for scoping analyses. Based on the results of CTF runs, STAR-CCM+ can be run for specific parameters of interest. CASL areas of application are CIPS for single phase analysis and DNB-CTF for two-phase analysis.

97 MATHEMATICS AND COMPUTING↗

Simulating Muon Capture with MARLEY

Core-collapse supernovae are intense sources of tens-of-MeV neutrinos. Each explosion releases about 1058 neutrinos in a burst lasting tens of seconds. As neutrinos are weakly interacting, they escape more easily compared to photons, allowing them to be observed before the light signal. Understanding low-energy neutrino interactions with argon will be critical for future supernova measurements with the Deep Underground Neutrino Experiment (DUNE). Interpreting future DUNE supernova neutrino data will require a high-quality model of O(10 MeV) neutrino interactions, but the dominant charged-current cross section has never been measured at these low energies for an argon target. We exploit the theoretical similarities between muon capture, which has been measured, and antineutrino scattering to test MARLEY (Model of Argon Reaction Low Energy Yields), the simulation code used by DUNE to model supernova neutrino reactions. I implemented C++ code to add a muon capture mode to MARLEY and compared the predictions of the new simulation to measured isotope branching ratios of the residual nuclei. The preliminary branching ratios predicted by MARLEY running in muon capture mode demonstrate promising baseline performance when compared to experimental data and are expected to improve with further model adjustments.

Wong, Baker Louie↗

Bayesian Calibration of Inertial Confinement Fusion Models with Very Expensive Data

Calibrating computer simulations against experimental data is a ubiquitous problem in science and is particularly difficult when experimental data are expensive or diffi- cult to collect. In inertial confinement fusion experiments, where a single data point can cost 10 5 –10 6 USD, calibration of large-scale design calculations is particularly challenging. We present a framework that aims to provide calibrated predictions far from the available data that can be trained using a small number of data points. The approach aims to retain as much of the physics (summarized by the simulation code) as possible and is based on a truncated polynomial chaos expansion in the space of simulation inputs, augmented with a non-parametric correction for higher distribution modes. Due to the difficulty of the problem, understanding the sources of uncertainty in the model is essential; we demonstrate this through an application of our approach to a series of 6 experimental laser shots. As a result, we validate our approach, show that the uncertainties in our predictions of experimental performance are dominated by shot-shot fluctuations and regression uncertainties, and discuss paths towards an improved prediction model.

97 MATHEMATICS AND COMPUTING↗

A comparative simulation study of coupled THM processes and their effect on fractured rock permeability around nuclear waste repositories

This paper presents an international, multiple-code, simulation study of coupled thermal, hydrological, and mechanical (THM) processes and their effect on permeability and fluid flow in fractured rock around heated underground nuclear waste emplacement drifts. Simulations were conducted considering two types of repository settings: (a) open emplacement drifts in relatively shallow unsaturated volcanic rock, and (b) backfilled emplacement drifts in deeper saturated crystalline rock. The results showed that for the two assumed repository settings, the dominant mechanism of changes in rock permeability was thermal-mechanically-induced closure (reduced aperture) of vertical fractures, caused by thermal stress resulting from repository-wide heating of the rock mass. The magnitude of thermal-mechanically-induced changes in permeability was more substantial in the case of an emplacement drift located in a relatively shallow, low-stress environment where the rock is more compliant, allowing more substantial fracture closure during thermal stressing. However, in both of the assumed repository settings in this study, the thermal-mechanically-induced changes in permeability caused relatively small changes in the flow field, with most changes occurring in the vicinity of the emplacement drifts.

54 ENVIRONMENTAL SCIENCES↗

Validation of gyrokinetic simulations with measurements of electron temperature fluctuations and density-temperature phase angles on ASDEX Upgrade

Measurements of turbulent electron temperature fluctuation amplitudes, $δT_e⊥/T_e$, frequency spectra, and radial correlation lengths, $L_r(T_{e⊥}$), have been performed at ASDEX Upgrade using a newly upgraded Correlation ECE diagnostic in the range of scales $k_⊥<1.4 cm^{-1}, k_r < 3.5 cm^{-1} (k_⊥ρ_s < 0.28$ and $k_rρ_s < 0.7$). The phase angle between turbulent temperature and density fluctuations, α nT , has also been measured by using an ECE radiometer coupled to a reflectometer along the same line of sight. These quantities are used simultaneously to constrain a set of ion-scale non-linear gyrokinetic turbulence simulations of the outer core ( ρ tor = 0.75) of a low density, electron heated L-mode plasma, performed using the gyrokinetic simulation code, GENE. The ion and electron temperature gradients were scanned within uncertainties. It is found that gyrokinetic simulations are able to match simultaneously the electron and ion heat flux at this radius within the experimental uncertainties. The simulations were performed based on a reference discharge for which $δT_{e⊥}/T_e$ measurements were available, and $L_r(T_{e⊥}$) and α nT were then predicted using synthetic diagnostics prior to measurements in a repeat discharge. While temperature fluctuation amplitudes are overestimated by >50% for all simulations within the sensitivity scans performed, good quantitative agreement is found for $L_r(T_{e⊥}$) and α nT . Finally, a validation metric is used to quantify the level of agreement of individual simulations with experimental measurements, and the best agreement is found close to the experimental gradient values.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inertial Confinement Fusion Design Search Using Bayesian Optimization

Inertial confinement fusion (ICF) experiments rely on complex multi-physics simulation codes such as the Lawrence Livermore National Laboratory-developed HYDRA to guide design work. However, these simulations have several dozen tunable parameters and can be computationally expensive. This makes searching the parameter space challenging and time-consuming. Recently developed automated tools utilize Bayesian optimization to search these high-dimensional parameter spaces for optimal designs. The optimization tools run 2D integrated simulations in HYDRA to converge on a design that produces specified scalar or vector outputs. In this paper, we apply the Bayesian optimization tools to two common tuning scenarios. First, we tune simulation inputs to match measurements of a well-characterized experiment at the National Ignition Facility. This type of tuning is commonly performed to compensate for the use of simplified simulation settings (e.g. reduced resolution) or to account for missing physics in the simulations. Second, we search for an ICF simulation design that has a particular radiation drive profile. These optimizations replicate the kinds of tuning researchers routinely perform, but do so with significantly reduced manual effort. This approach demonstrates a powerful and efficient pathway toward autonomous, high-fidelity design optimization for future ICF experiments.

Bayesian optimization↗

Development of Estimation Method for Radioactivity Concentration Distribution of Radioactive Wastes in a Box-shaped Container - 17034

We are developing a new estimation method suitable for determining radioactivity concentration distribution of radioactive wastes stored in a square box-shaped container. This method uses the Maximum A Posteriori (MAP) method which is a way to solve the inverse problem, and it estimates the radioactivity concentration distribution by comparing simulated data with measured data. In the measurement, gamma rays emitted from the radioactive wastes are measured by several gamma ray spectrometers which are set at different positions in relation to each other. On the other hand, the gamma ray spectrum data of each spectrometer are simulated by a Monte Carlo simulation code. The method uses an iterative calculation to solve the concentration distribution with measured spectrum data and simulated spectrum data. We conducted a simulation test to check the algorithm of our estimation method. And we also conducted an experiment using activated objects. We found that the concentration of the wastes in a box-shaped container could be estimated within a 20 % error for the simulation, and within a 40 % error for the experiment and we confirmed that feasibility of our method was favorable. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Experimental study of the hydrodynamic trajectory of an x-ray-heated gold plasma

Hydrodynamic processes of radiation-ablated high-Z plasmas have great influence on the x-ray radiation transport both in a high-Z tube with low-Z foam filling and in a low-Z filling indirect drive cavity. Using the intense x-ray radiation to heat a low-Z foam-tamped high-Z gold plate from a half cavity, the hydrodynamic moving process of the x-ray-ablated gold plasma has been studied by an imaging method with Ti He-alpha line emission as the backlighter source. The hydrodynamic trajectory of the x-ray-heated gold plasma was obtained and the average trajectory velocity of (36.5+-1.2) km/s was derived. The experimental trajectory was compared with the simulations using the one-dimensional (1D) RDMG [P. Gu et al., Sci. China, Ser. G 48, 345 (2005)] and two-dimensional (2D) LARED-R [K. Lan et al., Laser Part. Beams 23, 275 (2005)] codes separately. It is shown that the 2D LARED-R code simulated the measured plasma trajectory much better than the 1D RDMG code due to the fact that the lateral x-ray radiation loss was taken into account in the 2D LARED-R but not in the 1D RDMG simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of BF{sub 3} plasma immersion ion implantation into silicon

Plasma immersion ion implantation from a BF{sub 3} plasma into crystalline (100) silicon was performed using the PULSION plasma doping tool. Implanted boron profiles were measured with the SIMS method and simulated using models with different levels of sophistication. The physical implantation model is based on an analytical energy distribution for ions from the plasma and uses a Monte-Carlo simulation code. An analytical model of plasma immersion ion implantation that assumes a uniform and isotropic implantation was implemented in a software module called IMP3D. The functionality of this module which was initially envisaged for the three-dimensional simulation of conventional ion implantation was extended to plasma immersion ion implantation and examples of 2D and 3D simulations from this are presented.

36 MATERIALS SCIENCE↗