SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Three practical problems in conduction/forced convection heat transfer are analyzed using a simplified engineering formulation of convective finite elements. Upwind and conventional finite element solutions are compared for steady-state and transient applications.
There is currently a strong interest in obtaining highly accurate measurements of solar radiation reflected by Earth. For example, the Traceable Radiometry Underpinning Terrestrial- and Helio- Studies (TRUTHS) satellite mission has been under consideration in Europe for several years, and planning is now under way for the Climate Absolute Radiance and Refractivity Observatory (CLARREO) spacecraft in the United States. Such spacecraft will provide measurements whose high accuracy is traceable to SI standards; these measurements will be useful as a reference for calibrating similar instruments on board other spacecraft. Hence, analysis of opportunities for intercalibration between two spacecraft plays an important role in the planning of future missions. In order for intercalibration to take place, the measurements obtained from two spacecraft must have similar viewing geometry and be taken within a few minutes of one another. Viewing geometry is characterized in terms of viewing zenith angle, solar zenith angle, and relative azimuth angle. Opportunities for intercalibration are greater in number and longer in duration if the sensor with high accuracy can be aimed at points on the surface of the Earth other than the nadir or sub-satellite point. Analysis of intercalibration over long periods is rendered tractable by making several simplifying assumptions regarding orbital motions of the two spacecraft about Earth, as well as Earth s orbit about the Sun. The shape of the Earth is also considered. A geometric construction called a tent is introduced to facilitate analysis. It is helpful to think of an intercalibration opportunity as the passage of one spacecraft through a tent that has a fixed shape and moves with the spacecraft whose measurements are to be calibrated. Selection of points on Earth s surface as targets for measurement is discussed, as is aiming the boresight of a steerable instrument. Analysis results for a pair of spacecraft in typical low Earth orbits are provided.
A simplified gross thrust calculation technique was evaluated in flight tests on an F-15 aircraft using prototype F100-PW-100 engines. The technique relies on afterburner duct pressure measurements and empirical corrections to an ideal one-dimensional analysis to determine thrust. In-flight gross thrust calculated by the simplified method is compared to gross thrust calculated by the engine manufacturer's gas generator model. The evaluation was conducted at Mach numbers from 0.6 to 1.5 and at altitudes from 6000 meters to 13,700 meters. The flight evaluation shows that the simplified gross thrust method and the gas generator method agreed within plus or minus 3 percent. The discrepancies between the data generally fell within an uncertainty band derived from instrumentation errors and recording system resolution.
NASA collects, processes and distributes petabytes of Earth Observation (EO) data from satellites, aircraft, in situ instruments and model output, with an order of magnitude increase expected by 2024. Cloud-based web object storage (WOS) of these data can simplify the execution of such an increase. More importantly, it can also facilitate user analysis of those volumes by making the data available to the massively parallel computing power in the cloud. However, storing EO data in cloud WOS has a ripple effect throughout the NASA archive system with unexpected challenges and opportunities. One challenge is modifying data servicing software (such as Web Coverage Service servers) to access and subset data that are no longer on a directly accessible file system, but rather in cloud WOS. Opportunities include refactoring of the archive software to a cloud-native architecture; virtualizing data products by computing on demand; and reorganizing data to be more analysis-friendly.
NASA collects, processes and distributes petabytes of Earth Observation (EO) data from satellites, aircraft, in situ instruments and model output, with an order of magnitude increase expected by 2024. Cloud-based web object storage (WOS) of these data can simplify the execution of such an increase. More importantly, it can also facilitate user analysis of those volumes by making the data available to the massively parallel computing power in the cloud. However, storing EO data in cloud WOS has a ripple effect throughout the NASA archive system with unexpected challenges and opportunities. One challenge is modifying data servicing software (such as Web Coverage Service servers) to access and subset data that are no longer on a directly accessible file system, but rather in cloud WOS. Opportunities include refactoring of the archive software to a cloud-native architecture; virtualizing data products by computing on demand; and reorganizing data to be more analysis-friendly. Reviewed by Mark McInerney ESDIS Deputy Project Manager.
An analytical model for the orifice pulse tube is developed, in which the system is described in terms of average enthalpy flow with such simplifying assumptions as an ideal gas and sinusoidal pressure variation. Phasor analysis is used to represent temperature, pressure, and mass-flow rate waves in vector form. The model predictions, namely, that the refrigeration power of a pulse-tube refrigerator is proportional to the average pressure, the pulse frequency, the mass-flow ratio, and the square of the dynamic pressure ratio, were verified by experimental measurements. It was found that, as a result of the simplifying assumptions, the magnitudes of the refrigeration power predicted by the model were between three and five times greater than experimental values.
The construction of time-domain solutions by the superposition of modes is explained for the general case, which may not have any symmetry in the lines or terminations. This simplified method requires that the logic-gate terminal impedances be approximated by linear effective resistances that can be adequately determined by SPICE analysis of the actual logic gates. Several examples of results of crosstalk calculations made by the simplified method are presented and compared with corresponding results obtained using the SPICE transmission-line methods of Tripathi and Rettig (1985) along with full SPICE models of the logic gates. The simplified approach is shown to give satisfactory agreement for most purposes.
NASA’s High-Data Rate Architecture (HiDRA) project is working towards a general yet practical toolkit and knowledge base to help usher in the era of new technologies for space systems communications, such as optical links. The High-Rate Delay Tolerant Networking (HDTN) implementation falls under the umbrellas of both the toolkit and the knowledge base, as its advancements illuminate more general areas of Delay Tolerant Networking (DTN) that need growth. The goal of this paper is to explore the usage of particular mathematical machineries, namely temporal flow networks and sheaves, to identify fundamental, underlying structures in DTN for space systems. Satellites, space assets, ground stations, etc. give rise to a disconnected network, and it is the goal of DTN to glue disparate links together into a cohesive system, that is, a network. Depending on a given link, the latencies might be beyond that which the Transmission Control Protocol (TCP) can handle, and contact times might have one-way light times in excess of minute (sometimes significantly longer). Some links might be periodic (say, due to orbital mechanics) or they might not be. This diversity has made it difficult to probe the underlying structure. An immediate consequence is that DTNs in practice today are controlled by globally distributed contact plans (schedules), which are the input to the contact graph routing (CGR) algorithm. While this is effective for smaller networks, it will be very difficult to scale for future networks. Deeper and more rigorous theory is needed to bring DTN to the next evolutionary step. To this end, this paper introduces and suggests a mathematical framework for DTN, and applies it to a space network that is simulated using an orbital analysis toolkit. The tag-line for the structure known as sheaves is that they are the mathematically precise way of gluing local data together into unique, global data. If we consider routing, we see that networking is a “sheafy” science. We then discuss a simplified sheaf model, known as the cellular sheaf. The sheaf-theoretic analysis is presented and discussed, as it is hoped that this and related papers will help form the primordial ooze of DTN theory. Finally there is a section of future work suggesting follow-on research.
Development of HPF versions of NPB and ARC3D has shown that HPF provides an efficient, concise way to express parallelism and to organize data traffic. The use of HPF, as noted in the papers, requires an intimate knowledge of the applications and a detailed analysis of data affinity, data movement, and data granularity. To simplify and accelerate the task of developing HPF versions of existing CFD applications we have designed and implemented ADAPT (Automatic Data Alignment and Placement Tool). ADAPT analyzes a CFD application working on a single structured grid and generates HPF TEMPLATE, (RE)DISTRIBUTION, ALIGNMENT, and INDEPENDENT directives. The directives can be generated on the nest level, subroutine level, application level, or on the application interface level. ADAPT annotates an existing CFD FORTRAN application, performing computations on single or multiple grids. On each grid the application is considered as a sequence of operators, each applied to a set of variables defined in a particular grid domain. ADAPT automatically detects implicit operators (i.e., having data dependences) and explicit operators (without data dependences). For parallelization of an explicit operator ADAPT creates a template for the operator domain, aligns arrays used in the operator with the template, distributes the template, and declares the loops over the distributed dimensions as INDEPENDENT. For parallelization of an implicit operator, the distribution of the operator's domain should be consistent with the operator's dependences. Any dependence between sections distributed on different processors would preclude parallelization if the compiler does not have an ability to pipeline computations. If a data distribution is "orthogonal" to the dependences of an implicit operator, then the loop which implements the operator can be declared as INDEPENDENT. ADAPT starts with an analysis of array index expressions of the loop nests. For each pair of arrays referenced in an assignment statement, it generates an arc in the alignment graph and annotates it with an affinity relation. The template, alignment, and distribution directives for a particular loop nest are then derived from a transitive closure of the affinity relation. A compromise of data distributions in different nests and subroutines is achieved by merging annotated alignment graphs for adjacent nests/stibroutine calls in the nest/call graph of the application in the process called distribution lifting. ADAPT has been implemented as a C++ program running in conjunction with a parallelization tool called CAPTools. ADAPT uses the parse tree, interprocedural analysis and application database generated by CAPTools. It also uses the Directed Graph class, initially implemented in p2d2 (parallel debugger oi distributed programs), and some other classes supporting symbolic computations. ADAPT uses data distribution techniques described. ADAPT was tested with ARC3D and the FT benchmark and has demonstrated a code performance within a factor of 1.5 of handwritten versions.
A brief summary and evaluation is presented on the use of symbolic state equation techniques in order to represent robot arm dynamics with sufficient accuracy for controlling arm motion. The use of homogeneous transformations and the Lagrangian formulation of mechanics offers a convenient frame for the derivation, analysis and simplification of complex robot dynamics equations. It is pointed out that simplified state equations can represent robot arm dynamics with good accuracy.
Turbulence model for statistical analysis of fluid dynamics of eddies in chemically reacting flow
A simplified, time-dependent energy balance climate model is run at the latitude belt 40-50 deg N. The model solves for the temperatures of the land, air, and 12 vertical oceanic layers, and it includes a wind stirred mixed layer. A change in model ocean optical turbidity from relatively clear (Jerlov 1) to particle rich (Jerlov III) conditions decreases the effective thickness of the oceanic layer in which heat is stored seasonally and increases the seasonal variation of sea surface temperature by 2-3 C. A decrease in the liquid water content of clouds by a factor of 4 warms the model climate and increases the seasonal variation of sea surface temperatures by 2-3 C. A 2-3 C change in the seasonal variation of sea surface temperature is also obtained by varying oceanic mixing through a factor of 2 change in the surface wind speed.
Tetrahedral-lattice structure exhibits great complexity in mathematical analysis, and complexity quickly increases with number of elements. Solutions for static and dynamic behavior of structure obtained with model consisting of analogous structure with fewer repeating elements. Advantage of continuum models is analytic solutions can be obtained, either in closed form or in relatively-tractable Taylor series.
Pulsed laser sheet velocimetry yields nonintrusive measurements of velocity vectors across an extended 2-dimensional region of the flow field. The application of optical correlation techniques to the analysis of multiple exposure laser light sheet photographs can reduce and/or simplify the data reduction time and hardware. Here, Matched Spatial Filters (MSF) are used in a pattern recognition system. Usually MSFs are used to identify the assembly line parts. In this application, the MSFs are used to identify the iso-velocity vector contours in the flow. The patterns to be recognized are the recorded particle images in a pulsed laser light sheet photograph. Measurement of the direction of the partical image displacements between exposures yields the velocity vector. The particle image exposure sequence is designed such that the velocity vector direction is determined unambiguously. A global analysis technique is used in comparison to the more common particle tracking algorithms and Young's fringe analysis technique.
Pulsed laser sheet velocimetry yields noninstrusive measurements of velocity vectors across an extended 2-dimensional region of the flow field. The application of optical correlation techniques to the analysis of multiple exposure laser light sheet photographs can reduce and/or simplify the data reduction time and hardware. Here, Matched Spatial Filters (MSF) are used in a pattern recognition system. Usuallay MSFs are used to identify the assembly line parts. In this application, the MSFs are used to identify the iso-velocity vector contours in the flow. The patterns to be recognized are the recorded particle images in a pulsed laser light sheet photograph. Measurement of the direction of the particle image displacements between exposures yields the velocity vector. The particle image exposure sequence is designed such that the velocity vector direction is determined unambiguously. A global analysis technique is used in comparison to the more common particle tracking algorithms and Young's fringe analysis technique.
CAPRI is a software building tool-kit that refers to two ideas; (1) A simplified, object-oriented, hierarchical view of a solid part integrating both geometry and topology definitions, and (2) programming access to this part or assembly and any attached data. A complete definition of the geometry and application programming interface can be found in the document CAPRI: Computational Analysis PRogramming Interface appended to this report. In summary the interface is subdivided into the following functional components: 1. Utility routines -- These routines include the initialization of CAPRI, loading CAD parts and querying the operational status as well as closing the system down. 2. Geometry data-base queries -- This group of functions allow all top level applications to figure out and get detailed information on any geometric component in the Volume definition. 3. Point queries -- These calls allow grid generators, or solvers doing node adaptation, to snap points directly onto geometric entities. 4. Calculated or geometrically derived queries -- These entry points calculate data from the geometry to aid in grid generation. 5. Boundary data routines -- This part of CAPRI allows general data to be attached to Boundaries so that the boundary conditions can be specified and stored within CAPRI s data-base. 6. Tag based routines -- This part of the API allows the specification of properties associated with either the Volume (material properties) or Boundary (surface properties) entities. 7. Geometry based interpolation routines -- This part of the API facilitates Multi-disciplinary coupling and allows zooming through Boundary Attachments. 8. Geometric creation and manipulation -- These calls facilitate constructing simple solid entities and perform the Boolean solid operations. Geometry constructed in this manner has the advantage that if the data is kept consistent with the CAD package, therefore a new design can be incorporated directly and is manufacturable. 9. Master Model access This addition to the API allows for the querying of the parameters and dimensions of the model. The feature tree is also exposed so it is easy to see where the parameters are applied. Calls exist to allow for the modification of the parameters and the suppression/unsuppression of nodes in the tree. Part regeneration is performed by a single API call and a new part becomes available within CAPRI (if the regeneration was successful). This is described in a separate document. Components 1-7 are considered the CAPRI base level reader.
In this report it is shown that the shear, axial force, and moment at one point in a simple ring subjected to any loading condition can be given by three independent equations involving certain integrals that must be evaluated regardless of the method of analysis used. It is also shown how symmetry of the ring alone or of the ring and the loading about 1 or 2 axes makes it possible to simplify the three equations and greatly reduces the number of integrals that must be evaluated. Application of the general equations presented in this report to practical problems in the stress analysis of rings makes it possible to shorten, simplify, and systematize the calculations for both simple and braced rings. Three illustrative problems are included to demonstrate the application of the general equations to a simple ring with different loadings.
The potential of very-long-baseline interferometry (VLBI) is examined for use in the determination of wind speeds in Venus' lower atmosphere via the differential tracking of entry probes. A simplified mathematical model is presented in detail. An incomplete error analysis based on this model permits an educated guess to be made: an uncertainty in wind speed determination of no more than about 100/t m/sec, where t l is the corresponding time resolution in seconds, is an achievable goal, without the use of transponders on the miniprobes. If transponders are available on all probes, there should be little difficulty in estimating wind speeds with useful precision.