Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Analysis of a stability valve system for extending the dynamic range of a supersonic inlet

A stability valve system designed for a full-scale, flight, supersonic, mixed-compression inlet was modeled dynamically by using analog computer techniques. The system uses poppet valves mounted in the inlet cowl to bypass airflow and augments the inlet shock position control system by preventing unstarts caused by high-frequency perturbations. The model was used as a design aid to investigate the effects of varying both the physical configurations of the valve and the flight and wind tunnel conditions. Results of the analysis indicate that the stability valve will provide a bandpass operation of 1 hertz to 17 hertz.

Webb, J. A., Jr.↗
NASA NTRS1977

Vibrationally excited molecular hydrogen in Orion

Physical mechanisms for producing vibrationally excited molecular hydrogen, such as has recently been detected toward the Orion Nebula, are discussed. The most likely mechanisms are collisional excitation behind a shock moving into a molecular cloud and near-ultraviolet pumping in the H2 Lyman and Werner bands and subsequent cascade. The absolute intensities of the Orion lines require either a 10-km/s shock moving into a cloud with a density of 300,000 per cu cm or an incident near-UV flux 1 million times the mean interstellar value. The shock model is favored because it matches the observed relative line intensities and because the near-UV source, Theta-1 Ori C, may be too weak to provide the required flux. Intensities of other H2 lines in the shock model are predicted as a further observational discriminant.

Hollenbach, D. J.↗
NASA NTRS1978

Optimal control of a supersonic inlet to minimize frequency of inlet unstart

A preliminary investigation into the use of modern control theory for the design of controls for a supersonic inlet is described. In particular, the task of controlling a mixed-compression supersonic inlet is formulated as a linear optimal stochastic control and estimation problem. An inlet can exhibit an undesirable instability due to excessive inlet normal shock motion. For the optimal control formulation of the inlet problem, a non quadratic performance index, which is equal to the expected frequency of inlet unstarts, is used. This physically meaningful performance index is minimized for a range of inlet disturbance and measurement noise covariances.

Lehtinen, B.↗
NASA NTRS1984

X-ray emission from supernova remnants MSH 14 - 63 and RCW 103

Electron-ion collisions, heavy element enrichment of emissions from reverse-shocked ejecta, abundances in the interstellar medium (ISM), the correspondence between the projected and measured age, ISM particle density, and distance, and classification factors for Type I or II supernovae are examined using a nonequilibrium ionization (NEI) model. The NEI model accounts for the absence of collisional ionization equilibrium and possibly thermal equilibrium between electrons and ions behind the shock fronts, and describes the emission spectra from ejecta and the shocked ISM. When applied to data from the SNR MSH 14 - 63 a non-Coulomb, ion-electron interaction is obtained that is consistent with a shocked ISM. For the SNR RCW 103, however, the processes behind the shock front are not discernable, although the elemental abundances will have solar values if the interactions are non-Coulomb. The age of RCW 103 must be approximated from physical data, as Chinese astronomers would not have been able to see the event from their position on earth two millenia ago.

Nugent, J. J.↗
NASA NTRS1993

Determination of cosmic bodies size-velocity distribution by observation of current impacts on Mars

Collisions of cosmic bodies with terrestrial planets involve many physical processes such as deceleration and ablation during their flight through an atmosphere, the impact at a surface accompanied by cratering, melting and evaporation of surface material, generation of shock waves, etc. If body velocity is high enough then a thermal radiation is very important. All these processes on Mars proceed differently than on the other planets because of the low density of its atmosphere. In particular, this leads to the fact that smaller bodies of sizes of the order of 0.1-10 m strike the planet surface without being decelerated and perform some effects which may be detected by equipment placed on a board of artificial satellites, by a network of stations at the surface of Mars and even from the Earth. These observations can be used to determine size-velocity distribution of such bodies in the Solar System. Numerical simulation of the impacts at the surface of Mars have been carried out using two-dimensional gas dynamic code with detailed consideration of the thermal radiative transfer. This work is an extension of our previous paper. We have expanded a range of projectile sizes up to r sub 0 = 100 m. For such a large-scale body, the initial stage of the impact, involving crate ring and ejection of surface material, is very important. Thus, these effects have been taken into account.

Nemchinov, I. V.↗
NASA NTRS2010

Discovery of X-Ray-Emitting O-Ne-Mg-Rich Ejecta in the Galactic Supernova Remnant Puppis A

We report on the discovery of X-ray-emitting O-Ne-Mg-rich ejecta in the middle-aged Galactic O-rich supernova remnant Puppis A with Chandra and XMM-Newton. We use line ratios to identify a low-ionization filament running parallel to the northeastern edge of the remnant that requires super-solar abundances, particularly for O, Ne, and Mg, which we interpret to be from O-Ne-Mg-rich ejecta. Abundance ratios of Ne/O, Mg/O, and Fe/O are measured to be [approx]2, [approx]2, and <0.3 times the solar values. Our spatially resolved spectral analysis from the northeastern rim to the western rim otherwise reveals sub-solar abundances consistent with those in the interstellar medium. The filament is coincident with several optically emitting O-rich knots with high velocities. If these are physically related, the filament would be a peculiar fragment of ejecta. On the other hand, the morphology of the filament suggests that it may trace ejecta heated by a shock reflected strongly off the dense ambient clouds near the northeastern rim.

Katsuda, Satoru↗
NASA NTRS2010

Supersonic Free-Jet Combustion in a Ramjet Burner

A new dual-mode ramjet combustor concept intended for operation over a wide flight Mach number range is described. Subsonic combustion mode is similar to that of a traditional ram combustor which allows operation at higher efficiency, and to lower flight Mach numbers than current dual-mode scramjets. High speed mode is characterized by supersonic combustion in a free-jet that traverses the subsonic combustion chamber to a variable nozzle. The maximum flight Mach number of this scheme is governed largely by the same physics as its classical counterpart. Although a variable combustor exit aperture is required, the need for fuel staging to accommodate the combustion process is eliminated. Local heating from shock-boundary-layer interactions on combustor walls is also eliminated. Given the parallel nature of the present scheme, overall flowpath length is less than that of present dual-mode configurations. Cycle analysis was done to define the flowpath geometry for computational fluid dynamics (CFD) analysis, and then to determine performance based on the CFD results. CFD results for Mach 5, 8, and 12 flight conditions indicate stable supersonic free-jet formation and nozzle reattachment, thereby establishing the basic feasibility of the concept. These results also reveal the structure of, and interactions between the free-jet and recirculating combustion chamber flows. Performance based on these CFD results is slightly less than that of the constant-pressure-combustion cycle analysis primarily due to these interactions. These differences are quantified and discussed. Additional CFD results at the Mach 8 flight condition show the effects of nozzle throat area variation on combustion chamber pressure, flow structure, and performance. Calculations with constant temperature walls were also done to evaluate heat flux and overall heat loads. Aspects of the concept that warrant further study are outlined. These include diffuser design, ramjet operation, mode transition, loss mechanisms, and the effects of secondary flow for wall cooling and combustion chamber pressurization. Also recommended is an examination of system-level aspects such as weight, thermal management and rocket integration as well as alternate geometries and variable geometry schemes.

Trefny, Charles J.↗
NASA NTRS2011

Self-Rupturing Hermetic Valve

For commercial, military, and aerospace applications, low-cost, small, reliable, and lightweight gas and liquid hermetically sealed valves with post initiation on/off capability are highly desirable for pressurized systems. Applications include remote fire suppression, single-use system-pressurization systems, spacecraft propellant systems, and in situ instruments. Current pyrotechnic- activated rupture disk hermetic valves were designed for physically larger systems and are heavy and integrate poorly with portable equipment, aircraft, and small spacecraft and instrument systems. Additionally, current pyrotechnically activated systems impart high g-force shock loads to surrounding components and structures, which increase the risk of damage and can require additional mitigation. The disclosed mechanism addresses the need for producing a hermetically sealed micro-isolation valve for low and high pressure for commercial, aerospace, and spacecraft applications. High-precision electrical discharge machining (EDM) parts allow for the machining of mated parts with gaps less than a thousandth of an inch. These high-precision parts are used to support against pressure and extrusion, a thin hermetically welded diaphragm. This diaphragm ruptures from a pressure differential when the support is removed and/or when the plunger is forced against the diaphragm. With the addition of conventional seals to the plunger and a two-way actuator, a derivative of this design would allow nonhermetic use as an on/off or metering valve after the initial rupturing of the hermetic sealing disk. In addition, in a single-use hermetically sealed isolation valve, the valve can be activated without the use of potential leak-inducing valve body penetrations. One implementation of this technology is a high-pressure, high-flow-rate rupture valve that is self-rupturing, which is advantageous for high-pressure applications such as gas isolation valves. Once initiated, this technology is self-energizing and requires low force compared to current pyrotechnic-based burst disk hermetic valves. This is a novel design for producing a single-use, self-rupturing, hermetically sealed valve for isolation of pressurized gas and/or liquids. This design can also be applied for single-use disposable valves for chemical instruments. A welded foil diaphragm is fully supported by two mated surfaces that are machined to micron accuracies using EDM. To open the valve, one of the surfaces is moved relative to the other to (a) remove the support creating an unsupported diaphragm that ruptures due to over pressure, and/or (b) produce tension in the diaphragm and rupture it.

Tucker, Curtis E., Jr.↗
NASA NTRSDate not supplied

Investigation of Physical Mechanisms for Jet Noise Reduction by Plug Nozzle Porosity

This paper presents the results of a computational study on porous-plug nozzles for their eventual application in reducing takeoff noise levels for supersonic civil transport. The study explores a wide range of porous-plug geometries, encompassing variations in hole size, plug length and porosity. Computational fluid dynamics (CFD) analyses are employed in concert with an advanced automated mesh refinement (AMR) scheme, Sketch-to-Solution (S2S), to investigate porous plug nozzle design strategies that may diminish shock strength, broad-band shock noise (BBSN), flow separation, and other undesirable characteristics associated with high takeoff noise levels. A selected subset of the porous-plug nozzles that were analyzed computationally were manufactured at subscale using stereolithography 3D printing. These nozzles were tested experimentally, obtaining far-field noise spectral data and schlieren flow visualization pictures. Detailed comparisons between CFD predictions and experimental results were conducted. These comparisons focus on gaining a better understanding of the underlying physical mechanisms responsible for noise reduction with the porous plugs relative to corresponding solid plugs.

computational fluid dynamics↗
NASA NTRS2004

The Magnetic Field in the Outer Heliosphere

Voyager and Pioneer empirical results show that the IMF inside the termination shock behaves much as expected, which is not surprising since the field is essentially passively advected in this region. In contrast, MHD and kinematic models imply the field plays a major role in the dynamics in some regions of the heliosheath. However, of the many physical ingredients that constitute the outer heliosphere, the magnetic field poses some of the most interesting and difficult problems when being incorporated into 3D numerical models. Presently, only a few results have been published and much remains to be done. Nevertheless, there are good reasons to press forward with the MHD models. For example, the detailed nature of the field may be important in determining how galactic cosmic rays gain access to the heliosheath. Here I will briefly review the expected behavior of the magnetic field near the termination shock and in the heliosheath and summarize some of the modeling results. I will also review what I believe to be important modeling objectives. Finally, I will speculate on what might be happening with the magnetic field near the nose of the heliosphere and how this might influence plasma transfer across the heliopause.

Suess, Steve↗
NASA NTRS1979

Computation of three-dimensional turbulent separated flows at supersonic speeds

Numerical solutions of the time-averaged Navier-Stokes equations employing a simple eddy-viscosity model have been obtained for three dimensional turbulent flow fields at supersonic speeds. The computer results are compared with a series of experimental test flows describing the interaction of a swept shock wave with a turbulent boundary layer for various shock-wave strengths. Very good agreement is obtained between the computed and experimental surface and flow-field results. The computed flow fields are examined in detail to investigate the physics of this type of flow field. Questions concerning the existence of a vortex and the relationship between converging surface oil streaks and the resulting flow field are addressed.

Horstman, C. C.↗
NASA NTRS1980

Stability aspects of diverging subsonic flow

The paper describes the computation of two-dimensional, subsonic, diverging internal flows and how they differ from the corresponding converging flows. Such diverging or decelerating flows occur in such obvious places as subsonic diffusers and inlets; however, such flows also occur in supersonic nozzles in the presence of a normal shock. The flow instability and its relation to the numerical method used, boundary conditions, and viscous effects are assessed both analytically and numerically. The inviscid flow is shown to be physically unstable and a poor representation of the true viscous flow.

Cline, M. C.↗
NASA NTRS1980

Ion and electron pulses observed in the earth's magnetospheric environment

Pulses of about 100 keV ions and electrons of time duration of several minutes are frequently detected in the earth's magnetotail and in the upstream region from the earth's bow shock. The distribution of the locations of the IMP 7 satellite where the particles were observed over the period from Sept. 29, 1972 to Oct. 6, 1973 is presented. The physical implications of these findings as related to (1) the source locations and (2) the dynamic nature of the acceleration and propagation of these particles are discussed.

Lin, Y. C.↗
NASA NTRS1984

The 1.5 - 3.5 Micron Spectroscopy of the Orion H2 Source

A synopsis of current research with near infrared airborne spectroscopy of the Orion molecular hydrogen emission line source is presented. It is suggested that (H2) is the most abundant molecular species in the interstellar medium and is of paramount importance to understand its behavior and distribution in that medium. The H2 has no permanent electric dipole moment which precludes dipole transitions. It is, however, detected in absorption against background starlight by UV electronic transitions and in the IR through electric quadrupole rotation/vibration and pure rotation emission lines. The physical parameters of this region, in the context of their relationships to other members of the complex family of Orion objects, molecular clouds, compact IR sources, H 2 regions, and shock fronts are described.

Davis, D. S.↗
NASA NTRS2004

Density, Velocity and Ionization Structure in Accretion-Disc Winds

This was a project to exploit the unique capabilities of FUSE to monitor variations in the wind- formed spectral lines of the luminous, low-inclination, cataclysmic variables(CV) -- RW Sex. (The original proposal contained two additional objects but these were not approved.) These observations were intended to allow us to determine the relative roles of density and ionization state changes in the outflow and to search for spectroscopic signatures of stochastic small-scale structure and shocked gas. By monitoring the temporal behavior of blue-ward extended absorption lines with a wide range of ionization potentials and excitation energies, we proposed to track the changing physical conditions in the outflow. We planned to use a new Monte Carlo code to calculate the ionization structure of and radiative transfer through the CV wind. The analysis therefore was intended to establish the wind geometry, kinematics and ionization state, both in a time-averaged sense and as a function of time.

Sonneborn, George↗
NASA NTRS2007

Chemistry of Martian Soils from the Mars Exploration Rover APXS Instruments

The martian surface is covered with debris formed by several mechanisms and mobilized by various processes. Volcanism, impact, physical weathering and chemical alteration combine to produce particles of sizes from dust to boulders composed of primary mineral and rock fragments, partially altered primary materials, alteration minerals and shock-modified materials from all of these. Impacts and volcanism produce localized deposits. Winds transport roughly sand-sized material over intermediate distances, while periodic dust storms deposit a global dust layer of the finest fraction. The compositions of clastic sediments can be used to evaluate regional differences in crustal composition and/or weathering processes. Here we examine the growing body of chemical data on soils in Gusev crater and Meridiani Planum returned by the Alpha Particle X-ray Spectrometer (APXS) instruments on the rovers Spirit (MERA) and Opportunity (MERB), following on earlier results based on smaller data sets [1-4].

Mittlefehldt, D. W.↗
NASA NTRS2012

Future Gamma-Ray Imaging of Solar Eruptive Events

Solar eruptive events, the combination of large solar flares and coronal mass ejections (CMEs), accelerate ions to tens of Gev and electrons to hundreds of MeV. The energy in accelerated particles can be a significant fraction (up to tens of percent) of the released energy and is roughly equipartitioned between ions and electrons. Observations of the gamma-ray signatures produced by these particles interacting with the ambient solar atmosphere probes the distribution and composition of the accelerated population, as well as the atmospheric parameters and abundances of the atmosphere, ultimately revealing information about the underlying physics. Gamma-ray imaging provided by RHESSI showed that the interacting approx.20 MeV/nucleon ions are confined to flare magnetic loops rather than precipitating from a large CME-associated shock. Furthermore, RHESSI images show a surprising, significant spatial separation between the locations where accelerated ions and electrons are interacting, thus indicating a difference in acceleration or transport processes for the two types of particles. Future gamma-ray imaging observations, with higher sensitivity and greater angular resolution, can investigate more deeply the nature of ion acceleration. The technologies being proven on the Gamma-Ray Imager/Polarimeter for Solar flares (GRIPS), a NASA balloon instrument, are possible approaches for future instrumentation. We discuss the GRIPS instrument and the future of studying this aspect of solar eruptive events.

Shih, Albert↗