Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shape measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

An experimental study of three-dimensional shock wave/boundary layer interactions generated by sharp fins

The interaction between a turbulent boundary layer and a shock wave generated by a sharp fin with leading edge sweepback was investigated. The incoming flow was at Mach 2.96 and at a unit Reynolds number of 63 x 10 to the 6th power 0.1 m. The approximate incoming boundary layer thickness was either 4 mm or 17 mm. The fins used were at 5 deg, 9 deg and 15 deg incidence and had leading edge sweepback from 0 deg to 65 deg. The tests consisted of surface kerosene lampblack streak visualization, surface pressure measurements, shock wave shape determination by shadowgraphs, and localized vapor screen visualization. The upstream influence lengths of the fin interactions were correlated using viscous and inviscid flow parameters. The parameters affecting the surface features close to the fin and way from the fin were also identified. Essentially, the surface features in the farfield were found to be conical.

Lu, F. K.↗
NASA NTRS1983

High-resolution submillimeter-wave radiometry of supersonic flow

The recent development of a high-resolution submillimeter-wave heterodyne radiometer has made possible the first measurements of H2O molecule rotational line excitation temperatures and detailed profiles in supersonic flow. Absorption signals were measured across the flow for the 2/11/ from 2//02/ (752 GHz) para-H2O rotational transition against a hot background. These signals decrease downstream owing to the volume expansion of the gas away from the sonic nozle exit in the high-vacuum chamber. Radiative transfer calculations based on the large-velocity-gradient approximation and multilevel statistical equilibrium agree with these results and with the measured spectral line shapes. The data reveal nearly isentropic gas expansion and cooling. These studies have shown that submillimeter-wave heterodyne radiometry can be useful for remote sensing of supersonic flow with low mass flux, provided the signal transmission is through a dry or thin atmosphere.

Dionne, G. F.↗
NASA NTRS1982

The next generation microwave sounder for weather satellites

Microwave sounders are multichannel microwave radiometers for measuring atmospheric temperature (or humidity) profiles. These devices are also known as microwave spectrometers because a sounder typically has a number of channels measuring the spectral shape of an absorption line. Each channel of the sounder responds essentially to a given layer of the atmosphere. The characteristics of currently employed microwave sounders on satellites are briefly examined, and new features expected in connection with the introduction of the next generation sounders are discussed. There will probably be an increase in the number of oxygen channels with the objective to extend the weighting function height coverage into the stratosphere and to improve the temperature retrieval accuracy. Other features are to be related to better surface resolution, auxiliary channels, and water vapor sounding.

Shiue, J. C.↗
NASA NTRS1985

Particle phase function measurements by a new Fiber Array Nephelometer: FAN 1

A fiber array polar nephelometer of advanced design, the FAN I is capable of in-situ phase function measurements of scattered light from man-made or natural atmospheric particles. The scattered light is measured at 100 different angles throughout 360 degrees, thus providing a potential measurement of the asymmetry of irregularly shaped particles. Phase functions can be measured at 10 to 100 Hz rates and the range of measurable single particle sizes is from 5 micron m to as large as 8mm. For particles smaller than 5 micro m the ensemble average can be measured. The FAN I is microprocessor controlled and the data may be stored on floppy disk or printed out in tabular and/or graphical form. The optical head may be separated from the computer system for operation in field or adverse conditions. Examples of laboratory measured scattering phase functions obtained with the FAN I for spherical particles is given to illustrate its measurement capabilities.

Farmer, W. M.↗
NASA NTRS1984

Barrier height determination on Schottky contacts formed at the back contact-semiconductor interface of degraded solar cells

A method is described of determining an equivalent circuit for solar cells which have degraded as a result of the formation of a rectifying Schottky barrier at the back contact. An excellent fit of experimental data has been achieved using SCEPTRE with an equivalent circuit derived from the shape of the measured current voltage characteristics. One key parameter of the Schottky barrier diode, the reverse saturation current, can be used to determine the barrier potential. The barrier potential increases as the cell is stressed with 0.5 volts being a typical experimentally determined value for a degraded cell.

Misiakos, K.↗
NASA NTRS1984

Structural optimization of large ocean-going structures

Ocean-going vehicles and platforms are among the largest structures in the world and are subjected to relatively harsh conditions of motions and loads. Some of them, such as semi-submersible platforms, are a relatively new type of structure and hence there is no formal, well evolved and established structural design code as there is for more traditional structures. More recently, efforts have also been made to develop a design method of this type for ships and other ocean structures. One of the many advantages of a rationally based design method is versatility; it can be used for structures that have widely differing purposes, measures of merit, shapes and sizes. The purpose is to describe a rationally based design method that has been developed within the field of ocean structures, in order that persons dealing with other types of structure can judge whether and to what extent its various features may be useful for those other types. Also, even though some features may not be applicable they might stimulate some useful ideas.

Hughes, O. F.↗
NASA NTRS1986

The ionospheric extent of P/Halley from ground based operations during the 1985-1986 apparition

Spatial profiles of H2O(+) emission in the inner coma of P/Halley on 8 dates during the 1985 to 1986 apparition are presented. The profiles are derived from two dimensional CCD spectrograms taken with the spectrograph slit oriented along the cometary radius vector. The observations cover the range from 16 Oct. 1985 (r = 2.14 AU preperihelion) to 6 June 1986 (r = 2.14 AU postperihelion). The surface brightness profile of the 6198A H2O(+) emission line is calibrated in terms of the column density of H2O(+) ions. The profile from 14.4 Mar. 1986 is compared with the Giotto Ion Composition Experiment measurement of the shape of the H2O(+) space density profile. The ionosphere becomes larger and steeper in the sunward direction with an increasing water production rate.

Mccarthy, Patrick J.↗
NASA NTRS1988

Antenna pattern study

Prediction of antenna radiation patterns has long been an important function in the design of command, communication, and tracking systems for rocket vehicles and spacecraft. An acceptable degree of assurance that a radio link will provide the required quality of data or certainty of correct command execution must be acquired by some means if the system is to be certified as reliable. Two methods have been used to perform this function: (1) Theoretical analysis, based on the known properties of basic antenna element types and their behavior in the presence of conductive structures of simple shape, and (2) Measurement of the patterns on scale models of the spacecraft or rocket vehicle on which the antenna is located. Both of these methods are ordinarily employed in the antenna design process.

Harper, Warren↗
NASA NTRS1990

Optical Detection Of Deformations Of An Antenna

Proposed control subsystem generates small aiming-bias signals to correct for deviations of 70-m-diameter reflector of microwave antenna from its ideal shape. Takes optical measurements to determine deformations produced by such environmental factors as wind, gravity, and thermal differentials. Using these measurements, subsystem estimates misalignment of radiation pattern caused by deformations. Signals to correct for estimated misalignment added to angle-command signals of main antenna-aiming system. To measure deviations laser ranging devices placed at base of feed on rigid intermediate reference structure, white retroreflectors placed on parts that deviate from assigned positions relative to intermediate reference structure.

Schumacher, L. L.↗
NASA NTRS1990

Interface demarcation in GaAs by current pulsing

GTE Laboratories is currently conducting a program to investigate the effect of convection in the melt on the properties of bulk grown gallium arsenide (GaAs). In addition to extensive ground based experimentation, a Get Away Special growth system has been developed to grow two GaAs crystals aboard the Space Shuttle, each with a one inch diameter. In order to perform a complete segregation analysis of the crystals grown in space, it is necessary to measure the interface shape and growth rate as well as the spatial distribution of the selenium dopant. The techniques for interface demarcation in selenium doped GaAs by current pulsing have been developed at GTE Laboratories and successful interface demarcation has been achieved for current pulses ranging from 20 to 90 amps, in both single crystal and polycrystalline regions.

Matthiesen, D. H.↗
NASA NTRS1991

The application of high spectral and spatial resolution imaging spectrometers for locating downed aircraft

The utility of high-resolution imaging spectrometer data is examined as an aid in locating downed aircraft by using a unique spectral signature while not requiring the extremely high spatial resolution needed to identify an aircraft by shape. Ground spectral measurements of several airplane wings, overflight spectral measurements of aircraft scenes, and the rationale for the chosen spectral signature are presented. It is concluded that imaging spectrometers which can detect and spatially locate a narrow-band spectral signature filling only a few pixels appear to have a utility for search and rescue aircraft or satellite systems as a aid in locating small downed aircraft. This spectral feature would have to be added to the surface coatings applied to aircraft. Proposed for use as such a spectral signature is a significant negative reflectance slope, in the 520 to 580 nm interval.

Gatlin, James A.↗
NASA NTRS1992

Radar scattering properties of pancakelike domes on Venus

Magellan radar images have disclosed the presence of a large number of almost perfectly circular domes, presumably of volcanic origin, in many regions of Venus several with diameters of 30 km or more. Their high degree of symmetry has permitted measurements of their shape, as determined by the Magellan altimeter to be compared with models of dome production from the eruption of high-viscosity magmas. In this work, we examine in detail the radar images of domes in Rusalka Planitia (2.8 deg S, 150.9 deg E) and Tinatin Planitia (12.2 deg N, 7.5 deg E), selected for their circular symmetry and apparent absence of modification due to large-scale slumping or tectonic rifting.

Ford, P. G.↗
NASA NTRS1992

Apollo 17: One giant step toward understanding the tectonic evolution of the Moon

Our present understanding of the tectonic history of the Moon has been shaped in large measure by the Apollo Program, and particularly the Apollo 17 Mission. I attempt to summarize some of the interpretations that have emerged since Apollo 17, focusing on some of the problems and uncertainties that remain to stimulate future exploration of the Moon. The topics covered include: (1) Taurus-Littrow Valley; (2) origin of mare ridges; and (3) nature and timing of tectonic rille formation.

Sharpton, Virgil L.↗
NASA NTRS1994

Microscale hydrodynamics near moving contact lines

The hydrodynamics governing the fluid motions on a microscopic scale near moving contact lines are different from those governing motion far from the contact line. We explore these unique hydrodynamics by detailed measurement of the shape of a fluid meniscus very close to a moving contact line. The validity of present models of the hydrodynamics near moving contact lines as well as the dynamic wetting characteristics of a family of polymer liquids are discussed.

Garoff, Stephen↗
NASA NTRS1995

ACTS on-orbit multibeam antenna pattern measurements

The Advanced Communication Technology (ACTS) is a key to NASA's goal of developing high-risk, advanced communications technology using multiple frequency bands to support the nation's future communication needs. Using the multiple, dynamic hopping spot beams and advanced on board switching and processing systems, ACTS will open a new era in communications satellite technology. One of the key technologies to be validated as part of the ACTS program is the multibeam antenna (MBA) with rapidly reconfigurable hopping and fixed spot beams to serve users equipped with small-aperture terminals within the coverage areas. The MBA test program is designed to evaluate the on-orbit ACTS antenna performance. The main parameters measured are beam shape, beam center location and gain.

Acosta, R.↗
NASA NTRS1995

Deuterium and the Local Interstellar Medium: Properties for the Procyon and Capella Lines of Sight

We present Goddard High-Resolution Spectrograph observations of the interstellar H I and D I Ly-alpha lines and the Mg II and Fe II resonance lines formed along the lines of sight toward the nearby stars Procyon (3.5 pc, l = 214 deg, b = 13 deg) and Capella (12.5 pc, l = 163 deg, b = 5 deg). New observations of Capella were obtained at orbital phase 0.80, when the radial velocities of the intrinsic Ly-alpha emission lines of each star were nearly reversed from those of the previous observations at phase 0.26. Since the intrinsic Ly-alpha line of the Capella system (the 'continuum' against which the interstellar absorption is measured) has different shapes at phases 0.26 and 0.80, we can derive both the intrinsic stellar profiles and the interstellar absorption lines more precisely by jointly analyzing the two data sets. For the analysis of the Procyon line of sight, we first assumed that the intrinsic Ly-alpha line profile is a broadened solar profile, but this assumption does not lead to a good fit to the observed D I line profile for any value of D/H. We then assumed that (D/H)(sub LISM) = 1.6 x 10(exp -5), the same value as for the Capella line of sight, and we modified the broadened solar profile to achieve agreement between the simulated and observed line profiles. The resulting asymmetric intrinsic stellar line profile is consistent with the shapes of the scaled Mg II line profiles. We believe therefore that the Procyon data are consistent with (D/H)(sub LISM) = 1.6 x 10(exp -5), but the uncertainty in the intrinsic Ly-alpha emission-line profile does not permit us to conclude that the D/H ratio is constant in the local interstellar medium (LISM). The temperature and turbulence in the Procyon line of sight are T = 6900 +/- 80 (+/- 300 systematic error) K and zeta = 1.21 +/- 0.27 km/s. These properties are similar to those of Capella, except that the gas toward Procyon is divided into two velocity components separated by 2.6 km/s and the Procyon line of sight has a mean neutral hydrogen density that is a factor of 2.4 larger than that of the Capella line of sight. This suggests that the first 5.3 pc along the Capella line of sight lies within the local cloud and the remaining 7.2 pc lies in the hot gas surrounding the local cloud. We propose that n(H I) = 0.1065 +/- 0.0028 cm(exp -2) be adopted for the neutral hydrogen density within the local cloud and that zeta = 1.21 +/- 0.27 km/s be adopted for the nonthermal motions. The existence of different second velocity components toward the nearby stars Procyon and Sirius provides the first glimpse of a turbulent cloudlet boundary layer between the local cloud and the surrounding hot interstellar gas.

Linsky, Jeffrey L.↗
NASA NTRS1999

Laminar Soot Processes

Soot formation within hydrocarbon-fueled flames is an important unresolved problem of combustion science for several reasons: soot emissions are responsible for more deaths than any other combustion pollutant, thermal loads due to continuum radiation from soot limit the durability of combustors, thermal radiation from soot is mainly responsible for the growth and spread of unwanted fires, carbon monoxide associated with soot emissions is responsible for most fire deaths, and limited understanding of soot processes is a major impediment to the development of computational combustion. Thus, soot processes within laminar nonpremixed (diffusion) flames are being studied, emphasizing space-based experiments at microgravity. The study is limited to laminar flames due to their experimental and computational tractability, noting the relevance of these results to practical flames through laminar flamelet concepts. The microgravity environment is emphasized because buoyancy affects soot processes in laminar diffusion flames whereas effects of buoyancy are small for most practical flames. Results discussed here were obtained from experiments carried out on two flights of the Space Shuttle Columbia. After a brief discussion of experimental methods, results found thus far are described, including soot concentration measurements, laminar flame shapes, laminar smoke points and flame structure. The present discussion is brief.

Lin, K. -C.↗