Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “seismic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Ice Mass Fluctuations and Earthquake Hazard

In south central Alaska, tectonic strain rates are high in a region that includes large glaciers undergoing ice wastage over the last 100-150 years [Sauber et al., 2000; Sauber and Molnia, 2004]. In this study we focus on the region referred to as the Yakataga segment of the Pacific-North American plate boundary zone in Alaska. In this region, the Bering and Malaspina glacier ablation zones have average ice elevation decreases from 1-3 meters/year (see summary and references in Molnia, 2005). The elastic response of the solid Earth to this ice mass decrease alone would cause several mm/yr of horizontal motion and uplift rates of up to 10-12 mm/yr. In this same region observed horizontal rates of tectonic deformation range from 10 to 40 mm/yr to the north-northwest and the predicted tectonic uplift rates range from -2 mm/year near the Gulf of Alaska coast to 12mm/year further inland [Savage and Lisowski, 1988; Ma et al, 1990; Sauber et al., 1997, 2000, 2004; Elliot et al., 2005]. The large ice mass changes associated with glacial wastage and surges perturb the tectonic rate of deformation at a variety of temporal and spatial scales. The associated incremental stress change may enhance or inhibit earthquake occurrence. We report recent (seasonal to decadal) ice elevation changes derived from data from NASA's ICESat satellite laser altimeter combined with earlier DEM's as a reference surface to illustrate the characteristics of short-term ice elevation changes [Sauber et al., 2005, Muskett et al., 2005]. Since we are interested in evaluating the effect of ice changes on faulting potential, we calculated the predicted surface displacement changes and incremental stresses over a specified time interval and calculated the change in the fault stability margin using the approach given by Wu and Hasegawa [1996]. Additionally, we explored the possibility that these ice mass fluctuations altered the seismic rate of background seismicity. Although we primarily focus on evaluating the influence of ice mass changes since the end of the little Ice Age, the study is partially motivated by paleoseismic evidence from Yakataga and Kodiak regions which suggests that earlier glacier retreat may be associated with large earthquakes [Sauber et al., 2000; Carver et al., 2003].

Sauber, J.↗

Small Stirling Technology Exploration Power for Future Space Science Missions

High efficiency dynamic Radioisotope Power Systems (RPS) could be mission enabling for low power space applications such as small probes, landers rovers, and communication repeaters. These applications would contain science instruments and be distributed across planetary surfaces or near objects of interest where solar flux is insufficient for using solar cells. Small RPS could be used to provide power for sensing radiation, temperature, pressure, seismic activity, and other measurements of interest to planetary scientists. Small RPS would use fractional versions of the General Purpose Heat Source (GPHS) or Light Weight Radioisotope Heater Units (LWRHU), to heat power conversion technologies. Dynamic power systems are capable of three to four times higher conversion efficiency compared to static power conversion technologies, and would provide an equal amount of power using less fuel or more power using an equal amount of fuel. Providing spacecraft with more power could decrease duty cycling of basic functions and, therefore, increase the quality and abundance of science data. NASA GRC is developing a low power dynamic RPS that would convert heat from multiple LWRHU to one watt of usable direct current electric power for spacecraft instrumentation and communication. The power system could be used to charge batteries or capacitors for higher power burst usage. The initial design, called Small Stirling Technology Exploration Power (smallSTEP), is around 3 kg, 11 cm diameter X 32 cm long, and converts 8 watts of heat to one watt of electricity using a Stirling convertor. This low power conversion system represents a new class of RPS with power levels two orders of magnitude lower than prototypes currently being developed for space applications under NASA contracts. Development of the 1-watt RPS includes maturation of convertor and controller designs, performance evaluation of an evacuated metal foil insulation, and development of system interfaces. Initial demonstration of the subsystems has been completed in a laboratory environment and a higher fidelity system is being pursued for demonstration in relevant environments for use on small spacecraft needed to carry out future space science missions.

Wilson, Scott D.↗

Small Stirling Technology Exploration Power for Future Space Science Missions

High efficiency dynamic Radioisotope Power Systems (RPS) could be mission enabling for low power space applications such as small probes, landers rovers, and communication repeaters. These applications would contain science instruments and be distributed across planetary surfaces or near objects of interest where solar flux is insufficient for using solar cells. Small RPS could be used to provide power for sensing radiation, temperature, pressure, seismic activity, and other measurements of interest to planetary scientists. Small RPS would use fractional versions of the General Purpose Heat Source (GPHS) or Light Weight Radioisotope Heater Units (LWRHU), to heat power conversion technologies. Dynamic power systems are capable of three to four times higher conversion efficiency compared to static power conversion technologies, and would provide an equal amount of power using less fuel or more power using an equal amount of fuel. Providing spacecraft with more power could decrease duty cycling of basic functions and, therefore, increase the quality and abundance of science data. NASA Glenn Research Center (GRC) is developing a low power dynamic RPS that would convert heat from multiple LWRHU to one watt of usable direct current electric power for spacecraft instrumentation and communication. The power system could be used to charge batteries or capacitors for higher power burst usage. The initial design, called Small Stirling Technology Exploration Power (smallSTEP), is around 3 kg, 11 cm diameter X 32 cm long, and converts 8 watts of heat to one watt of electricity using a Stirling convertor. This low power conversion system represents a new class of RPS with power levels two orders of magnitude lower than prototypes currently being developed for space applications under NASA contracts. Development of the 1-watt RPS includes maturation of convertor and controller designs, performance evaluation of an evacuated metal foil insulation, and development of system interfaces. Initial demonstration of the subsystems has been completed in a laboratory environment and a higher fidelity system is being pursued for demonstration in relevant environments for use on small spacecraft needed to carry out future space science missions.

Wilson, Scott↗

InSight Mars Lander Instrument Deployment Arm Flight Software

The Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) lander landed on Mars on November 26, 2018 and continues to investigate the internal structure of the planet two years later. The Instrument Deployment Arm (IDA), a robotic arm on the lander, was used to deploy the science instrument payloads from the lander deck to the surface of Mars and to take images of the lander and the surrounding environment. This was the first precision deployment and release by a robotic arm on another planet. After deploying the instruments, the IDA has been used for instrument commissioning, scientific data gathering, and to assist with troubleshooting one of the science instruments. This paper provides a high-level summary of the flight software that controls the IDA. The paper provides an overview of the IDA software interfaces, task structure, command handling strategy, motion specification, motion planning, motor control, grapple control, fault protection, and telemetry.

Ali, Khaled S.↗

The size of the lunar core

A 0.2 arc second phase shift in the 18.6 year forced precession of the lunar figure was inferred from analysis of lunar laser ranging data. The source of the phase shift is either viscous friction at a lunar core mantle boundary or solid friction caused by tidal flexing of the Moon by the Earth. Core mantle viscous coupling will explain the signature if the core radius R sub c approximately equals 330 km. On the other hand, solid friction can account for the signature only if the lunar solid friction 0 approximately equals 30 is abnormally small compared with that observed for, say, Mars (approximately equals 100 - 200). Although the inferred core radius is certainly within the limits imposed by the Apollo seismic experiment, it is significantly smaller than estimates of order 400-500 km from electromagnetic sounding. How accurate is the estimate of the R sub c derived from the phase shift? The effect of uncertainties in the frictional coupling mechanism, core density and ellipticity on the inferred core radius are discussed. The excitation of lunar free librations by core turbulence vis-a-vis other mechanisms (e.g., cometary or asteroidal impacts) and the influence of changes in lunar precession in the past on lunar dynamo generation are also examined.

Yoder, C. F.↗

Satellite Geopotential Anomaly Constraints for the Crust of the Greenland-Iceland Region

Satellite magnetometer observations of the Greenland-Iceland region compare quite well with lower altitude data. The satellite magnetic data suggest magnetically enhanced crust was emplaced by the Iceland Plume. Crustal thicknesses, which may be more than 30 km for the Greenland-Scotland Ridge, were obtained from inversion of the compensating terrain gravity effects that were estimated by spectral correlation analysis of the free-air gravity anomalies and terrain gravity effects. Regional magnetic anomaly maxima overlie possible thickened crust from eastern Iceland to the Greenland Coast. The Iceland-Faroe Ridge may involve thinner crust than the Greenland-Iceland portion of the Greenland-Scotland Ridge. The gravity derived crustal model exceeds a 0.7 correlation with available seismic estimates. In thermally active areas our gravity Moho estimates are systematically deeper than the seismic estimates suggesting local density reductions of the underlying lower crust/upper mantle. In south central Greenland, on the other hand, the gravity Moho estimates are shallower than seismic estimates to suggest a local enhancement of the lower crust/upper mantle density. The dichotomous crust of the Greenland-Iceland and Iceland-Faroe Ridges suggests unequal crustal development by the Iceland Plume and the Mid-Atlantic Ridge, where more crustal material may have been contributed to the North Atlantic Plate than the Eurasian Plate. A new thermal modeling scheme based on Poisson's relation between point pole gravity and thermal potentials allows estimation of magnetic crustal thicknesses. Subsequent magnetic anomaly inversion for susceptibility contrasts infers crustal development of the Greenland-Scotland Ridge by temporally variable pulses in plume strength.

vonFrese, R. R.↗

VERA Geodetic Activities

This report briefly describes the geodetic activities of VERA in the year 2012. The regular geodetic observations are carried out both in K- and S/X-bands. The frequency of regular observations is three times a month-twice for the VERA internal observations in K-band. The networks of the S/X sessions are JADE of GSI and IVS-T2. The raw data of the T2 and JADE sessions are electronically transferred to the Bonn, Haystack, and GSI correlators via Internet. Gravimetric observations are carried out at the VERA stations. An SG was installed at Mizusawa and placed in the vicinity of the VERA antenna in order to monitor vertical displacement at the end of 2008, and the observations continued throughout the year. Also at the VERA-Ishigakijima station, continuous operation of the SG started in 2012. The crustal movements generated by the 2011 earthquake off the Pacific coast of Tohoku continued during 2012, and displacement of the VERA-Mizusawa position by post-seismic creeping continued.

Jike, Takaaki↗

Thermal radiation effects in the atmosphere initiated by pre-earthquake processes

The science community is still looking for pre-earthquake indicators of major seismic events in order to minimize the loss of human life. Recent advances in satellite technology have helped to increase the scientific understanding of the nature of pre-earthquake phenomena in the atmosphere and their relationship with transitional thermal anomalies. It was realized that the thermal heat fluxes over areas of earthquake preparation are a result of air ionization by Rn222, its isotopes and progenies and consequent water vapor condensation on newly formed ions. Latent heat (LH) is released as a result of this process and leads to the formation of local thermal radiation anomalies (TRA) known as outgoing longwave radiation (OLR). We recorded data from the most recent major earthquakes in California (2014) Nepal (2015) that allowed us to summaries TRA's main morphological features. It was also established that the TRA is part of a more complex chain of the short‐term earthquake precursors, which are explained within the framework of a Lithosphere-Atmosphere-Ionosphere Coupling (LAIC) model.

Dimitar Ouzounov↗

Relative array analysis of upper mantle lateral velocity variations in Southern California

The many densely spaced stations of the Southern California Seismic Network, SCARLET, provide a unique opportunity to examine local variations in upper mantle velocities. By averaging the incoming teleseismic wavefronts over 100-km aperture subarrays, ray parameter dT/dDelta, azimuth, and average arrival time estimates were obtained for each event. These values are compared to whole array plane fit parameters with relative array diagrams and representations of net subarray delays. The conducted study confirms the existence of a high-velocity body at depth beneath the Transverse Ranges and a low-velocity region under the Salton Trough. An uppermost mantle anomaly beneath the San Bernardino Mountains is well established both by this study and from local data. The relation of this body to the deeper structure is investigated.

Walck, M. C.↗

The Moho as a magnetic boundary

Magnetic data are presented for mantle derived rocks: peridtites from St. Pauls rocks, dunite xenoliths from the kaupulehu flow in Hawaii, as well as peridolite, dunite and eclogite xenoliths from Roberts Victor, Dutoitspan, Kilbourne Hole, and San Carlos diatremes. The rocks are paramagnetic or very weakly ferromagnetic at room temperature. Saturation magnetization values range from 0.013 emu/gm to less than 0.001 emu/gm. A review of pertinent literature dealing with analysis of the minerals in mantle xenoliths provides evidence that metals and primary Fe3O4 are absent, and that complex CR, Mg, Al, and Fe spinels dominate the oxide mineralogy. All of the available evidence supports the magnetic results, indicating that the seismic MOHO is a magnetic boundary.

Wasilewski, P. J.↗

Development of performance criteria for advanced Viking seismic experiments

The characteristics and requirements of the seismic instrument for mapping the internal structure of the planet Mars are briefly described. The types of signals expected to exist are microseismic background generated by wind and pressure variations and thermal effects, disturbances of or in the landed vehicle, signals caused by faulting and volcanic activity, and signals due to meteoritic impacts. The advanced instrument package should include a short-period vertical component system, a long-period or wide-band 3-component system, a high frequency vertical component system, and a system for detection and rejection of lander noises. The Viking '75, Surveyor, and Apollo systems are briefly described as potential instruments to be considered for modification. Data processing and control systems are also summarized.

Source record↗

The deep structure of lunar basins - Implications for basin formation and modification

Models for the crustal structure in the vicinity of nine impact basins, from an inversion of gravity and topographic data from the lunar nearside are presented. The models display a low-density nonmare crustal layer and a mare basalt layer, both of variable thicknesses. Assuming that topography in mare areas is isostatically compensated before the emplacement of mare basalts and that compensation of mare basalt units may be neglected, a decomposition of the gravity anomaly into contributions from Moho relief and mare fill is permitted. Minimum values for mare basalt thicknesses are obtained but because mare basalts and mantle material are similar in density, the thicknesses of the nonmare crust are estimated. An important constraint is the crustal thickness inferred from the Apollo 12 and 14 landing sites from seismic observations. The crustal thickness model indicates that the crust is thinner beneath each of the major nearside basins than in surrounding areas. New bounds on the volume of material ejected from each basin are derived. The geological implications of structural differences among basins for the processes of basin formation and modification are evaluated as functions of time on the moon.

Bratt, S. R.↗

Equation of state fits to the lower mantle and outer core

The lower mantle and outer core are subjected to tests for homogeneity and adiabaticity. An earth model is used which is based on the inversion of body waves and Q-corrected normal-mode data. Homogeneous regions are found at radii between 5125 and 4825 km, 4600 and 3850 km, and 3200 and 2200 km. The lower mantle and outer core are inhomogeneous on the whole and are only homogeneous in the above local regions. Finite-strain and atomistic equations of state are fit to the homogeneous regions. The apparent convergence of the finite-strain relations is examined to judge their applicability to a given region. In some cases the observed pressure derivatives of the elastic moduli are used as additional constraints. The effect of minor deviations from adiabaticity on the extrapolations is also considered. An ensemble of zero-pressure values of the density and seismic velocities are found for these regions. The range of extrapolated values from these several approaches provides a measure of uncertainties involved.

Butler, R.↗

Evidence for variations in magma production along oceanic spreading centers - A critical appraisal

Recent geologic, geophysical, and geochemical studies of the oceanic lithosphere near fracture zones have resulted in the proposal that the 'magma budget,' defined as the amount of magma delivered to magma chambers or conduits beneath a spreading center for a given amount of spreading, decreases as fracture zones are approached. Seismic reflection and refraction studies indicate that the crust becomes anomalously thin near fracture zones, but reference must be made to the boundary between residual upper mantle peridotites and overlying cumulate rocks in order to assess potential variations in the magma budget. The position of this interface, however, generally is not constrained by geophysical studies. Geochemical variations in basaltic glasses collected near fracture zones are consistent with a decrease in partial melting as fracture zones are approached, but they could also be produced by variations in open-system magmatic processes with no change in the extent of partial melting. Although a decrease in the magma budget as fracture zones are approached is consistent with these data, so are alternative models that incorporate a constant magma budget.

Karson, J. A.↗

A model for the motion of the Philippine Sea plate consistent with NUVEL-1 and geological data

We investigate angular velocity vectors of the Philippine Sea (PH) plate relative to the adjacent major plates, Eurasia (EU) and Pacific (PA), and the smaller Caroline (CR) plate. Earthquake slip vector data along the Philippine Sea plate are inverted, subject to the constraint that EU-PA motion equals that predicted by the global relative plate model NUVEL-1. The resulting solution fails to satisfy geological constraints along the Caroline-Pacific boundary: convergence along the Mussau Trench and divergence along the Sorol Trough. We then seek solutions satisfying both the CR-PA boundary conditions and the Philippine Sea slip vector data, by adjusting the PA-PH and EU-PH best fitting poles within their error ellipses. We also consider northern Honshu to be part of the North American plate and impose the constraint that the Philippine Sea plate subducts beneath northern Honshu along the Sagmi Trough in a NNW-NW direction. Of the solutions satisfying these conditions, we select the best EU-PH as 48.2 deg N, 157.0 deg E, 1.09 deg/my, corresponding to a pole far from Japan and south of Kamchatka, and PA-PH, 1.2 deg N, 134.2 deg E, 1.00 deg/my. Predicted NA-PH and EU-PH convergence rates in central Honshu are consistent with estimated seismic slip rates. Previous estimates of the EU-PH pole close to central Honshu are inconsistent with extension within the Bonin backarc implied by earthquake slip vectors and NNW-NW convergence of the Bonin forearc at the Sagami Trough.

Seno, Tetsuzo↗

In-Flight Line-Of-Sight Pointing Performance for the GOES-16 and GOES-17 Spacecraft

The Geostationary Operational Environmental Satellite-R program (GOES-R) has launched two of the next generation geostationary weather satellites, both of which are now fully operational. GOES-16 launched in November 2016, and GOES-17 launched in March 2017. In this paper, we present the pointing and pointing stability results of the two spacecraft, with specific focus on aspects of the design related to mitigating jitter. The flight instrument suite includes 6 seismic accelerometers sampled at approximately 2 kilohertz, allowing in-flight verification of pointing stability and comparison back to simulation predictions. This paper compares the observed flight results with the simulation predictions for acceleration and shock response spectrum (SRS) for various operational scenarios and instrument observation modes. Passive isolation of both the reaction wheels and the payload deck have proved to be effective in reducing jitter responses. Active Vibration Damping (AVD) of flexible-body modes attenuates the low frequency motion of the vehicle appendages, improving the low-frequency pointing performance. Knowledge of the instrument scan mirror motion is fed forward to the reaction wheel control, reducing disturbances on the spacecraft bus. Attitude knowledge and rate data are provided to the primary Earth-observing instrument with an accuracy defined by the Integrated Rate Error (IRE) requirements. The data are used to adjust instrument scanning. As we show in this paper, the in-flight performance of the GN&C (Guidance, Navigation and Control) design provides the necessary capabilities to achieve the demanding GOES-R mission objectives while its robustness enabled the simultaneous operation of the Advanced Baseline Imager (ABI) prime and redundant cryocoolers (CCs) to resolve an in-flight cooling anomaly on GOES-17.

Line-of-Sight↗

Seismic Shaking Removal of Craters 0.2-0.5 km in Diameter on Asteroid 433 Eros

Impact cratering acts in a variety of ways to create a surprising range of scenery on small satellites and asteroids. The visible crater population is a self-modifying characteristic of these airless objects, and determining the various ways younger craters can add or subtract from the population is an important aspect of small body "geology." Asteroid 433 Eros, the most closely studied of any small body, has two aspects of its crater population that have attracted attention: a fall-off of crater densities below approx.100 m diameter relative to an expected equilibrium population [1] and regions of substantially lower large crater densities [2, 3, 4]. In this work we examine the global variation of the density of craters on Eros larger than 0.177 km, a size range above that involved in small crater depletion hypotheses [1, 5]. We counted all craters on Eros to a size range somewhat below 0.177 km diameter (and different from data used in [3]). The primary metric for this study is the number of craters between 0.177 and 1.0 km within a set radius of each grid point on the 2deg x 2deg shape model of Eros. This number can be expressed as an R-value [6], provided that it is remembered that the large bin size makes individual R values slightly different from those obtained in the usual root-2 bins.

Thomas, P. C.↗

A sea-level recorder for tectonic studies

In the past tide gauges have provided valuable information concerning the vertical ground deformation associated with major earthquakes. Although tide-gauge data contains numerous sources of noise, a spacing of less than 40 km between gauges is indicated for a useful study of dilatant behavior, and a spacing of less than 80 km may be adequate for the study of crustal downwarping in island arcs. An inexpensive tide gauge which is designed to provide a continuous record of sea level with a measurement precision of 1 mm is described. Hydraulic filtering is incorporated into the instrument to attenuate daily tides relative to longer period variations of sea level. The instrument is designed to operate from flashlight batteries for a year unattended and to withstand temporary submersion as might be caused by tsunamis. Several of these sea-level recorders have been installed in seismic gaps in the Aleutians and in the Caribbean.

Bilham, R.↗